Assign all PCI busses on G3 Blue & White
PATCH 1/1 Assign all PCI busses on G3 Blue & White
From: Pavel Roskin <[email protected]>
G3 Blue & White is misconfigured by default so that CardBus controllers in PCI slots don't work. The PCI bridge is programmed to only allow access to bus 1 but not higher busses.
The patch forces the PCI busses to be reassigned if a Grackle controller is found and the machine identifies itself as "PowerMac1,1"
---
My previous attempt to fix this bug can be found in this thread:
http://ozlabs.org/pipermail/linuxppc-dev/2004-May/thread.html#17056
The new patch relies on the existing common PCI code and doesn't poke bridge registers itself. It would even do the right thing if a PCI or CardBus bridge is inserted into the upper slot reserved for video cards and connected directly to bus 0.
---
arch/powerpc/sysdev/grackle.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
arch/powerpc/sysdev/grackle.c +2 -0
@@ -56,6 +56,8 @@ static inline void grackle_set_loop_snoop(struct pci_controller *bp, int enable)void __init setup_grackle (struct pci_controller *hose) {setup_indirect_pci (hose,0xfec00000 ,0xfee00000 ); +if (machine_is_compatible ("PowerMac1,1" )) + pci_assign_all_buses =1 ;if (machine_is_compatible ("AAPL,PowerBook1998" ))grackle_set_loop_snoop (hose,1 );#if 0 /* Disabled for now, HW problems ??? */
Signature · 2 lines
Regards, Pavel Roskin
Quoted 10 lines · Pavel Roskin
From: Pavel Roskin <[email protected]>
G3 Blue & White is misconfigured by default so that CardBus controllers in PCI slots don't work. The PCI bridge is programmed to only allow access to bus 1 but not higher busses.
The patch forces the PCI busses to be reassigned if a Grackle controller is found and the machine identifies itself as "PowerMac1,1"
Signed-off-by Pavel Roskin <[email protected]>
Quoted 27 lines
---
My previous attempt to fix this bug can be found in this thread:
http://ozlabs.org/pipermail/linuxppc-dev/2004-May/thread.html#17056
The new patch relies on the existing common PCI code and doesn't poke bridge registers itself. It would even do the right thing if a PCI or CardBus bridge is inserted into the upper slot reserved for video cards and connected directly to bus 0.
---arch/powerpc/sysdev/grackle.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)arch/powerpc/sysdev/grackle.c +2
-0@@ -56,6 +56,8 @@ static inline void grackle_set_loop_snoop(struct pci_controller *bp, int enable)void __init setup_grackle (struct pci_controller *hose) {setup_indirect_pci (hose,0xfec00000 ,0xfee00000 ); +if (machine_is_compatible ("PowerMac1,1" )) + pci_assign_all_buses =1 ;if (machine_is_compatible ("AAPL,PowerBook1998" ))grackle_set_loop_snoop (hose,1 );#if 0 /* Disabled for now, HW problems ??? */