Skip to contentSkip to conversation

powerpc: Add support for MPC8349E-mITX-GP

PATCH Applied Timur Tabi 2 participants 4 messages Feb 9, 2007 – Feb 13, 2007

Subsystems (2)
lore
Share & tools
lore

Timur Tabi

author
#0 lore raw

PATCH 1/1 powerpc: Add support for MPC8349E-mITX-GP

This patch adds a defconfig and a DTS for the MPC8349E-mITX-GP, a variant of the MPC8349E-mITX.

USB is disabled because the only active USB port currently is not supported in the kernel.

---
 arch/powerpc/boot/dts/mpc8349emitxgp.dts     |  187 ++++
 arch/powerpc/configs/mpc834x_itxgp_defconfig | 1174 ++++++++++++++++++++++++++
 2 files changed, 1361 insertions(+), 0 deletions(-)
arch/powerpc/boot/dts/mpc8349emitxgp.dts new file +187 -0
new file mode 100644
index 0000000..3190774
@@ -0,0 +1,187 @@
+/*
+ * MPC8349E-mITX-GP Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+/ {
+	model = "MPC8349EMITXGP";
+	compatible = "MPC834xMITXGP";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8349@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;
+			i-cache-line-size = <20>;
+			d-cache-size = <8000>;
+			i-cache-size = <8000>;
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+			32-bit;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <00000000 10000000>;
+	};
+
+	soc8349@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00000200>;
+		bus-frequency = <0>;                    // from bootloader
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <200 100>;
+		};
+
+		i2c@3000 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <e 8>;
+			interrupt-parent = <700>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3100 100>;
+			interrupts = <f 8>;
+			interrupt-parent = <700>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			device_type = "spi";
+			compatible = "mpc83xx_spi";
+			reg = <7000 1000>;
+			interrupts = <10 8>;
+			interrupt-parent = <700>;
+			mode = <0>;
+		};
+
+		usb@23000 {
+			device_type = "usb";
+			compatible = "fsl-usb2-dr";
+			reg = <23000 1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <700>;
+			interrupts = <26 2>;
+			dr_mode = "otg";
+			phy_type = "ulpi";
+		};
+
+		mdio@24520 {
+			device_type = "mdio";
+			compatible = "gianfar";
+			reg = <24520 20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			linux,phandle = <24520>;
+
+			/* Vitesse 8201 */
+			ethernet-phy@1c {
+				linux,phandle = <245201c>;
+				interrupt-parent = <700>;
+				interrupts = <12 2>;
+				reg = <1c>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@24000 {
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <24000 1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <20 8 21 8 22 8>;
+			interrupt-parent = <700>;
+			phy-handle = <245201c>;
+		};
+
+		serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 100>;
+			clock-frequency = <0>;		// from bootloader
+			interrupts = <9 8>;
+			interrupt-parent = <700>;
+		};
+
+		serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 100>;
+			clock-frequency = <0>;		// from bootloader
+			interrupts = <a 8>;
+			interrupt-parent = <700>;
+		};
+
+		pci@8600 {
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+					/* IDSEL 0x0F - PCI Slot */
+					7800 0 0 1 700 14 8 /* PCI_INTA */
+					7800 0 0 2 700 15 8 /* PCI_INTB */
+					 >;
+			interrupt-parent = <700>;
+			interrupts = <43 8>;
+			bus-range = <1 1>;
+			ranges = <42000000 0 a0000000 a0000000 0 10000000
+				  02000000 0 b0000000 b0000000 0 10000000
+				  01000000 0 00000000 e3000000 0 01000000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <8600 100>;
+			compatible = "83xx";
+			device_type = "pci";
+		};
+
+		crypto@30000 {
+			device_type = "crypto";
+			model = "SEC2";
+			compatible = "talitos";
+			reg = <30000 10000>;
+			interrupts = <b 8>;
+			interrupt-parent = <700>;
+			num-channels = <4>;
+			channel-fifo-len = <18>;
+			exec-units-mask = <0000007e>;
+			descriptor-types-mask = <01010ebf>;
+		};
+
+		pic@700 {
+			linux,phandle = <700>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <700 100>;
+			built-in;
+			device_type = "ipic";
+		};
+	};
+};
arch/powerpc/configs/mpc834x_itxgp_defconfig new file +1174 -0

1,174 lines not on this page · raw message

Signature · 1 line
1.4.4
#1 lore raw
Quoted 5 lines · Timur Tabi

This patch adds a defconfig and a DTS for the MPC8349E-mITX-GP, a variant of the MPC8349E-mITX.

USB is disabled because the only active USB port currently is not supported in the kernel.

What is not supported? We support both MPH and DR on 834x?

- k

author
#2 lore raw
Quoted 4 lines · Kumar Gala
Quoted 2 lines

USB is disabled because the only active USB port currently is not supported in the kernel.

What is not supported? We support both MPH and DR on 834x?

It just doesn't work. I think Leo's patches for the 8349 EMDS are the missing piece, but they need to be adapted to the ITX and ITX-GP.

Unfortunately, I don't know enough about USB to know what exactly Leo's patch is addressing, or why the USB port on the ITX-GP doesn't. And I don't have the time to fix everything at once.

Signature · 2 lines
Timur Tabi
Linux Kernel Developer @ Freescale