Skip to contentSkip to conversation

JFFS2: print a message when marking bad block

PATCH New Artem Bityutskiy 1 participant 1 message Mar 8, 2007

Subsystems (2)
Memory technology devices (MTD) Journalling flash file system V2 (JFFS2)
lore
Share & tools
lore

Artem Bityutskiy

author
#0 lore raw

PATCH 1/1 JFFS2: print a message when marking bad block

From: Artem Bityutskiy <[email protected]>
Date: Thu, 8 Mar 2007 10:35:10 +0200
Subject: [PATCH] JFFS2: print a message when marking bad block

New bad eraseblock is an event which is important enough to be printed about.

Signed-off-by Artem Bityutskiy <[email protected]>
---
 fs/jffs2/wbuf.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
fs/jffs2/wbuf.c +1 -1
index cc5fee4..6d53ada 100644
@@ -1130,7 +1130,7 @@ int jffs2_write_nand_badblock(struct jffs2_sb_info *c, struct jffs2_eraseblock *
 	if (!c->mtd->block_markbad)
 		return 1; // What else can we do?
 
-	D1(printk(KERN_WARNING "jffs2_write_nand_badblock(): Marking bad block at %08x\n", bad_offset));
+	printk(KERN_WARNING "JFFS2: marking eraseblock at %08x\n as bad", bad_offset);
 	ret = c->mtd->block_markbad(c->mtd, bad_offset);
 
 	if (ret) {
Signature · 6 lines
1.4.4.2


-- 
Best regards,
Artem Bityutskiy (Битюцкий Артём)