RT kernel: force detect HPET from PCI space
PATCH 1/5 RT kernel: force detect HPET from PCI space
Patchset enables force detection of HPET, when it is not listed by BIOS. and enables use of HPET as a event source. HPET timers
configures in stamdard interrupt mode can be used as dependable per CPU timer on laptops that are known to have LAPIC stoppage with ACPI C3 state.
Patch is against rt kernel (2.6.20-rt8) and patch enables only x86-64 right now.
This patch:
Detect HPET by looking at PCI space, even when BIOS does not list HPET device. This is useful to use HPET as dependable per CPU timer with tickless kernels.
arch/i386/kernel/quirks.c +55 -0
@@ -48,3 +48,58 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INDECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_INTEL ,PCI_DEVICE_ID_INTEL_E7525_MCH , quirk_intel_irqbalance);DECLARE_PCI_FIXUP_FINAL (PCI_VENDOR_ID_INTEL ,PCI_DEVICE_ID_INTEL_E7520_MCH , quirk_intel_irqbalance);#endif + +#if defined(CONFIG_HPET_TIMER ) +unsigned long force_hpet_address; + +static void __init force_enable_hpet (struct pci_dev *dev) +{ +u32 val, rcba; +void __iomem *base; + +if (hpet_address) +return ; + +pci_read_config_dword (dev,0xF0 , &rcba); + rcba &=0xFFFFC000 ; +if (rcba ==0 ) { +printk (KERN_DEBUG "RCBA disabled. Cannot force enable HPET\n" ); +return ; + } + +/* use bits 31:14, 16 kB aligned */ + base =ioremap_nocache (rcba,0x4000 ); +if (base ==NULL ) { +printk (KERN_DEBUG "ioremap failed. Cannot force enable HPET\n" ); +return ; + } + +/* read the Function Disable register, dword mode only */ + val =readl (base +0x3404 ); + +if (!(val &0x80 )) { +/* HPET disabled in HPTC. Trying to enable */ +writel (val |0x80 , base +0x3404 ); + } + + val =readl (base +0x3404 ); + +if (!(val &0x80 )) { +printk (KERN_DEBUG "Failed to force enable HPET\n" ); + }else { + val = val &0x3 ; + force_hpet_address =0xFED00000 | (val <<12 ); +printk (KERN_DEBUG "Force enabled HPET. Base address 0x%x\n" , + force_hpet_address); + } + +iounmap (base); +} + +DECLARE_PCI_FIXUP_HEADER (PCI_VENDOR_ID_INTEL ,PCI_DEVICE_ID_INTEL_ESB2_0 , force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER (PCI_VENDOR_ID_INTEL ,PCI_DEVICE_ID_INTEL_ICH6_1 , force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER (PCI_VENDOR_ID_INTEL ,PCI_DEVICE_ID_INTEL_ICH7_1 , force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER (PCI_VENDOR_ID_INTEL ,PCI_DEVICE_ID_INTEL_ICH7_31 , force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER (PCI_VENDOR_ID_INTEL ,PCI_DEVICE_ID_INTEL_ICH8_1 , force_enable_hpet); +#endif +
include/asm-i386/hpet.h +1 -0
@@ -91,6 +91,7 @@#define HPET_TICK_RATE (HZ * 100000UL)extern unsigned long hpet_address;/* hpet memory map physical address */ +extern unsigned long force_hpet_address;/* hpet memory detected by quirk */ extern int is_hpet_enabled (void );#ifdef CONFIG_X86_64
include/asm-x86_64/hpet.h +1 -0
@@ -63,6 +63,7 @@ extern unsigned int hpet_calibrate_tsc(vextern int hpet_use_timer;extern unsigned long hpet_address; +extern unsigned long force_hpet_address;extern unsigned long hpet_period;extern unsigned long hpet_tick;
Quoted 6 lines · Venkatesh Pallipadi
Patchset enables force detection of HPET, when it is not listed by BIOS.
and enables use of HPET as a event source. HPET timers configures in stamdard interrupt mode can be used as dependable per CPU timer
on laptops that are known to have LAPIC stoppage with ACPI C3 state.
(sorry about the belated reply)
cool patchset! I suspect the most logical place to start this would be on upstream 32-bit, which has the hpet clockevents changes already. Plus the i386 and x86_64 hpet code should be unified.
Ingo
Quoted 17 lines
-----Original Message-----
From: Ingo Molnar [mailto:[email protected]]
Sent: Friday, March 30, 2007 2:47 AM
To: Pallipadi, Venkatesh
Cc: linux-kernel; Thomas Gleixner
Subject: Re: [PATCH 1/5] RT kernel: force detect HPET from PCI spaceQuoted 6 lines · Venkatesh Pallipadi
Patchset enables force detection of HPET, when it is not listed by BIOS.
and enables use of HPET as a event source. HPET timers configures in stamdard interrupt mode can be used as dependable per CPU timer
on laptops that are known to have LAPIC stoppage with ACPI C3 state.
Quoted 6 lines
(sorry about the belated reply)
cool patchset! I suspect the most logical place to start this would be on upstream 32-bit, which has the hpet clockevents changes already. Plus the i386 and
x86_64hpet code should be unified.
Yes. I restarted the work recently with i386 and upstream. I should have the some patches in couple of weeks time.
Thanks,
Venki