2.6.22-rc3-mm1
Subsystems (16)
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc3/2.6.22-rc3-mm1/
- Merged the convert-cpusets-to-container-infrastructure patches. These will probably be dropped and redone.
Boilerplate:
- See the `hot-fixes' directory for any important updates to this patchset.
- To fetch an -mm tree using git, use (for example)
git-fetch git://git.kernel.org/pub/scm/linux/kernel/git/smurf/linux-trees.git tag v2.6.16-rc2-mm1 git-checkout -b local-v2.6.16-rc2-mm1 v2.6.16-rc2-mm1
- -mm kernel commit activity can be reviewed by subscribing to the mm-commits mailing list.
echo "subscribe mm-commits" | mail [email protected]
- If you hit a bug in -mm and it is not obvious which patch caused it, it is most valuable if you can perform a bisection search to identify which patch introduced the bug. Instructions for this process are at
http://www.zip.com.au/~akpm/linux/patches/stuff/bisecting-mm-trees.txt
But beware that this process takes some time (around ten rebuilds and reboots), so consider reporting the bug first and if we cannot immediately identify the faulty patch, then perform the bisection search.
- When reporting bugs, please try to Cc: the relevant maintainer and mailing list on any email.
- When reporting bugs in this kernel via email, please also rewrite the email Subject: in some manner to reflect the nature of the bug. Some developers filter by Subject: when looking for messages to read.
- Occasional snapshots of the -mm lineup are uploaded to ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/ and are announced on the mm-commits list.
Changes since 2.6.22-rc2-mm1:
origin.patch
git-acpi.patch
git-alsa.patch
git-avr32.patch
git-cifs.patch
git-cpufreq.patch
git-drm.patch
git-dvb.patch
git-gfs2-nmw.patch
git-hid.patch
git-ieee1394.patch
git-input.patch
git-kbuild.patch
git-kvm.patch
git-leds.patch
git-libata-all.patch
git-md-accel.patch
git-mips.patch
git-mmc.patch
git-mtd.patch
git-ubi.patch
git-netdev-all.patch
git-net.patch
git-backlight.patch
git-battery.patch
git-ioat.patch
git-ioat-vs-git-md-accel.patch
git-nfs.patch
git-nfs-server-cluster-locking-api.patch
git-ocfs2.patch
git-parisc.patch
git-r8169.patch
git-selinux.patch
git-pciseg.patch
git-s390.patch
git-sh.patch
git-scsi-misc.patch
git-scsi-rc-fixes.patch
git-scsi-target.patch
git-unionfs.patch
git-watchdog.patch
git-wireless.patch
git-ipwireless_cs.patch
git-newsetup.patch
git-xfs.patch
git-cryptodev.patch
git-xtensa.patch
git-gccbug.patch
git trees
-powerpc-fix.patch -freezer-close-potential-race-between-refrigerator-and-thaw_tasks.patch -freezer-fix-vfork-problem.patch -freezer-take-kernel_execve-into-consideration.patch -freezer-fix-kthread_create-vs-freezer-theoretical-race.patch -freezer-fix-pf_nofreeze-vs-freezeable-race.patch -freezer-move-frozen_process-to-kernel-power-processc.patch -ignore-bogus-acpi-info-for-offline-cpus.patch -slub-debug-fix-object-size-calculation.patch -fuse-fix-mknod-of-regular-file.patch -mpc52xx_psc_spi-fix-it-for-config_ppc_merge.patch -spi-doc-update-describe-clock-mode-bits.patch -nohz-rate-limit-the-local-softirq-pending-warning-output.patch -genhd-expose-an-to-user-space.patch -genhd-send-async-notification-on-media-change.patch -capabilityh-warning-fix.patch -remove-unused-header-file-arch-arm-mach-s3c2410-basth.patch -avr32-ratelimit-segfault-reporting-rate.patch
-cifs-oops-fix.patch -powerpc-fix-kconfig-select-warning-with-ucc_fast.patch -8xx-mpc885ads-pcmcia-support-fix.patch -gregkh-driver-howto-removing-duplicated-entry.patch -drm-spinlock-initializer-cleanup.patch -cinergyt2-fix-file-release-handler.patch -saa7111-fix-picture-settings-cache-bug.patch -jdelvare-i2c-i2c-legacy-drivers-shouldnt-issue-uevents.patch -jdelvare-i2c-i2c-usb-tiny-fix-name-length.patch -jdelvare-i2c-i2c-s3c2410-fix-build-warning.patch -jdelvare-hwmon-hwmon-ds1621-swapped-limits.patch -jdelvare-hwmon-hwmon-coretemp-add-more-safety-checks.patch -jdelvare-hwmon-hwmon-w83627hf-quiet-when-no-chip.patch -dave-broke-gfs2-26-nmwgit.patch -use-menuconfig-objects-ii-kvm-virt.patch -libata-acpi-add-infrastructure-for-drivers-to-use.patch -pata_acpi-restore-driver-vs-libata-clean-up-sff-init-mess-fix.patch -optional-led-trigger-for-libata.patch -libata-add-support-for-ata_16-on-atapi.patch -drivers-ata-add-sw-ncq-support-to-sata_nv-for-mcp51-mcp55-mcp61.patch -drivers-ata-add-sw-ncq-support-to-sata_nv-for-mcp51-mcp55-mcp61-fix.patch -drivers-ata-add-sw-ncq-support-to-sata_nv-for-mcp51-mcp55-mcp61-fix-tidy.patch -cleanup-libata-hpa-support.patch
-cleanup-libata-hpa-support-fix.patch -hpt3x2n-correct-revision-boundary.patch -pata_sis-fix-and-clean-up-some-timing-setups.patch -ide-aec62xx-kill-speedproc-method-wrapper.patch -ide-warning-fixes.patch -ide-add-seagate-stt20000a-to-dma-blacklist.patch -git-md-accel-build-fix.patch -sundance-change-phy-address-search-from-phy=1-to-phy=0.patch -forcedeth-add-vitesse-phy.patch -forcedeth-fix-power-management-support.patch -forcedeth-fix-cpu-irq-mask.patch
-forcedeth-version-bump.patch -use-mutex-instead-of-binary-semaphore-in-idt77252-driver.patch -use-menuconfig-objects-dccp.patch
-use-menuconfig-objects-ipvs.patch
-use-menuconfig-objects-sctp.patch
-use-menuconfig-objects-tipc.patch
-use-menuconfig-objects-arcnet.patch -use-menuconfig-objects-toeknring.patch -af_rxrpc-af_rxrpc-depends-on-ipv4.patch -af_rxrpc-make-call-state-names-available-if-config_proc_fs=n.patch -xfrm_algo-warning-fixes.patch -round_up-macro-cleanup-in-drivers-parisc.patch -pci-quirks-disable-msi-on-rs400-200-and-rs480.patch -drivers-scsi-advansysc-cleanups.patch -remove-unnecessary-check-in-drivers-scsi-sgc.patch -drivers-scsi-ncr5380c-replacing-yield-with-a.patch -scsi-cover-up-bugs-fix-up-compiler-warnings-in-megaraid-driver.patch -fdomainc-get-rid-of-unused-stuff.patch -scsi-fix-config_scsi_wait_scan=m.patch -scsi-use-irq_handler_t-where-appropriate.patch -drivers-scsi-ipsc-remove-kernel-24-code.patch -drivers-scsi-nsp32c-remove-kernel-24-code.patch -aic94xx-asd_clear_nexus-should-fail-if-the-cleared-task-does-not-complete.patch -scsi-megaraid_sas-intercepts-cmd-timeout-and-throttle-io.patch -scsi-remove-__gfp_dma.patch
-ncr5380-warning-fixes.patch -gregkh-usb-usb-fix-omninet-memory-leak-found-by-coverity.patch -gregkh-usb-usb-remove-useless-check-in-mos7840-found-by-coverity.patch -gregkh-usb-usb-storage-ignore-sitecom-wl-117-usb-wlan.patch -gregkh-usb-usb-fix-more-ftdi-elan-u132-hcd-include-lossage.patch -gregkh-usb-usb-handle-more-rndis_host-oddities.patch -gregkh-usb-usb-remove-usb-docbook-warnings.patch -gregkh-usb-usb-address-fixme-in-usbnet-wrt-drivers-claiming-multiple-interfaces.patch -gregkh-usb-ehci-fix-problem-with-bios-handoff.patch -gregkh-usb-usb-more-autosuspend-timer-stuff.patch -gregkh-usb-usb-remove-unneeded-warn_on.patch -gregkh-usb-usb-new-device-pid-for-ftdi_sio-driver.patch -gregkh-usb-usb-set-the-correct-interrupt-interval-in-usb_bulk_msg.patch -gregkh-usb-usb-fsl_usb2_udc-fix-umti_wide-support-and-a-compile-warning.patch -gregkh-usb-usb-auerswald-fix-file-release-handler.patch -gregkh-usb-usb-remove-duplicate-ids-from-option-card-driver.patch -gregkh-usb-usb-deref-urb-after-usbmon-is-done-with-it.patch -gregkh-usb-usb-remove-short-initial-timeout-for-device-descriptor-fetch.patch -gregkh-usb-usb-don-t-try-to-kzalloc-0-bytes.patch -gregkh-usb-usb-onetouch-switch-to-using-input_dev-devparent.patch -gregkh-usb-usb-fix-debug-output-of-ark3116.patch -gregkh-usb-usb-usblp-use-correct-dma-address-in-case-of-probe-error.patch -gregkh-usb-usb-fix-usb-ohci-subvendor-for-toshiba-portege-4000.patch -gregkh-usb-usb-make-the-autosuspend-workqueue-thread-freezable.patch -gregkh-usb-usb-handle-errors-in-power-level-attribute.patch -gregkh-usb-usb-fix-ratelimit-call-semantics.patch -gregkh-usb-usb-fix-race-between-autosuspend-and-unregister-for-root-hubs.patch -usb-core-hubc-loops-forever-on-resume-from-ram-due-to.patch -watchdog-documentation.patch -drivers-net-wireless-libertas-rxc-fix.patch -arch-x86_64-vdso-vmac-needs-schedh.patch -x86_64-build-and-use-gdt-on-copied-compressed-kernel.patch -i386-efi-fix-proc-iomem-type-for-kexec-tools.patch -bug-in-i386-mtrr-initialization.patch -xfs-clean-up-shrinker-games.patch
-xfs-use-zero_user_page.patch -prohibit-rcutorture-from-being-compiled-into-the-kernel.patch -avoid-zero-size-allocation-in-cache_k8_northbridges.patch -recalc_sigpending_tsk-fixes.patch -optimize-compat_core_sys_select-by-a-using-stack-space-for-small-fd-sets.patch -spi-potential-memleak-in-spidev_ioctl.patch -fbdev-cleanup-of-sparc-fb-options.patch -pm2fb-rdac_wr-barriers-clean-up.patch
-pm3fb-various-fixes.patch
-w100fb-fix-compile-warnings.patch -ps3fb-use-fb_sys_-instead-of-fb_cfb_.patch
-imxfb-remove-ifdefs.patch
-imxfb-fix-memory-hole.patch -missing-const-from-reiserfs-min_key-declaration.patch -uselib-add-missing-mnt_noexec-check.patch
x86_64-allocate-sparsemem-memmap-above-4g.patch
-x86_64-allocate-sparsemem-memmap-above-4g-fix.patch -fuse-generic_write_checks-for-direct_io.patch -fuse-delete-inode-on-drop.patch -slub-debug-fix-check-for-super-sized-slabs-512k-64bit-256k.patch -char-cyclades-fix-deadlock.patch -simplify-cleanup_workqueue_thread.patch -simplify-cleanup_workqueue_thread-fix.patch -simplify-cleanup_workqueue_thread-fix2.patch -misc-phantom-move-to-unlocked_ioctl.patch -misc-misc-phantom-move-to-unlocked_ioctl-fix.patch -misc-phantom-take-care-of-pci-posting.patch -power-fix-sizeofpage_size-typo.patch
-update-dontdiff-file.patch -signalfd-retrieve-multiple-signals-with-one-read-call.patch -signalfd-retrieve-multiple-signals-with-one-read-call-tidy.patch -i2o-destroy-event-queue-only-when-drv-event-is-set.patch -i2o-fix-notifiers-when-max_drivers-is-configured.patch -i2o-eliminate-a-peculiar-constraint-on-i2o_max_drivers.patch -i386-x86-64-show-that-config_hotplug_cpu-is-required-for-suspend-on-smp.patch -md-avoid-overflow-in-raid0-calculation-with-large-components.patch -md-dont-write-more-than-is-required-of-the-last-page-of-a-bitmap.patch -md-fix-bug-with-linear-hot-add-and-elsewhere.patch -hisax-fix-error-checking-for-hisax_register.patch -sch_htb-fix-event-cache-time-calculation.patch -applesmc-sensors-patch-missing-from-2622-rc2.patch -off-by-one-in-floppyc.patch -ecryptfs-delay-writing-0s-after-llseek-until-write.patch -doc-clocksources.patch -ehci-fsl-fix-cache-coherency-problem-on-system-with-large-memory.patch -prevent-going-idle-with-softirq-pending.patch -i386-fix-early-usage-of-atomic_add_return-and.patch -omap_uwire-spi_cpha-mode-bugfix.patch -ads7846-spi_cpha-mode-bugfix.patch
-capifunc-warning-fixes.patch -hardware-eicon-messagec-warning-fixes.patch -delete-every-useless-reference-to-noret_type-in-the-tree.patch -ext4-copy-i_flags-to-inode-flags-on-write.patch -firestream-warnings.patch
Merged into mainline or a subsystem tree
+slub-more-documentation.patch +slub-more-documentation-fix.patch +smpboot-cachesize-comparison-fix-in-smp_tune_scheduling.patch +pci-quirks-fix-msi-disabling-on-rs400-200-and-rs480.patch +ntfs_init_locked_inode-fix-array-indexing.patch +m68k-runtime-patching-infrastructure.patch +slub-fix-numa--sysfs-bootstrap-issue.patch +afs-needs-schedh.patch +m68k-discontinuous-memory-support.patch
2.6.22 queue
+mm-fix-fault-vs-invalidate-race-for-linear-mappings-fix.patch
Fix mm-fix-fault-vs-invalidate-race-for-linear-mappings.patch
+lots-of-architectures-enable-arbitary-speed-tty-support.patch
tty work
+remove-dell-optiplex-gx240-from-the-acpi-blacklist.patch
ACPI fix
-use-menuconfig-objects-ii-sound.patch
Dropped, being redone
-working-3d-dri-intel-agpko-resume-for-i815-chip-tidy.patch -working-3d-dri-intel-agpko-resume-for-i815-chip-update.patch
Folded into working-3d-dri-intel-agpko-resume-for-i815-chip.patch
+intel_agp-cleanup-intel-private-data.patch +intel_agp-cleanup-intel-private-data-update.patch +intel_agp-use-table-for-device-probe.patch +intel_agp-use-table-for-device-probe-update.patch
AGP stuff
+dm-add-missing-braces-in-driver-debug-code.patch
DM fix
+ppc-remove-dead-code-for-preventing-pread-and-pwrite-calls.patch +viotape-use-designated-initializers-for-fops-member.patch
powerpc fixes
+gregkh-driver-driver-core-add-missing-kset-uevent.patch +gregkh-driver-sysfs-make-sysfs_alloc_ino-static.patch +gregkh-driver-sysfs-fix-parent-refcounting-during-rename-and-move.patch +gregkh-driver-sysfs-reorganize-sysfs_new_indoe-and-sysfs_create.patch +gregkh-driver-sysfs-use-iget_locked-instead-of-new_inode.patch +gregkh-driver-sysfs-fix-root-sysfs_dirent-root-dentry-association.patch +gregkh-driver-sysfs-move-s_active-functions-to-fs-sysfs-dirc.patch +gregkh-driver-sysfs-slim-down-sysfs_dirent-s_active.patch +gregkh-driver-sysfs-use-singly-linked-list-for-sysfs_dirent-tree.patch
Driver tree updates
+jdelvare-i2c-i2c-mv64xxx-numbered-adapter.patch +jdelvare-i2c-i2c-mpc-numbered-adapter.patch +jdelvare-i2c-i2c-nforce2-add-smbus-block-transactions.patch
I2C tree updates
+jdelvare-hwmon-hwmon-pc87360-to-platform-driver.patch +jdelvare-hwmon-hwmon-use-platform_device_add_data.patch +jdelvare-hwmon-hwmon-lm90-add-max6681-support.patch +jdelvare-hwmon-hwmon-fault-file-name.patch +jdelvare-hwmon-hwmon-it87-add-it8726f-support.patch +jdelvare-hwmon-hwmon-w83627hf-pwm-freq-support.patch
hwmon tree udpates
+hdaps-switch-to-using-input-polldev.patch
+applesmc-switch-to-using-input-polldev.patch
+ams-switch-to-using-input-polldev.patch
Update some monitoring drivers for new input APIs
+ia64-arbitary-speed-tty-ioctl-support.patch
tty work
+joydevc-automatic-re-calibration.patch
+drivers-input-mouse-kconfig-fix-typo.patch
Inupt updates
+use-posix-bre-in-headers-install-target.patch
kbuild fix
-git-leds-fixup.patch
Unneeded
-libata-add-human-readable-error-value-decoding-v2.patch
Folded into libata-add-human-readable-error-value-decoding.patch
+ide-aec62xx-kill-speedproc-method-wrapper-take-2.patch +ide-ide_in_drive_list-accept-null-as-the-wildcard-for-firmware-revision.patch +ide-mips-au1xxx_ide-h-use-null-as-firmware-revision-wildcard.patch +ide-ide_in_drive_list-all-is-not-a-wildcard-anymore.patch
IDE tree updates
-nommu-make-it-possible-for-romfs-to-use-mtd-devices-fix.patch
Folded into nommu-make-it-possible-for-romfs-to-use-mtd-devices.patch
-use-mutex-instead-of-semaphore-in-the-mtd-st-m25pxx-driver-build-fix.patch
Folded into use-mutex-instead-of-semaphore-in-the-mtd-st-m25pxx-driver.patch
+atari_pamsnetc-old-declaration-ritchie-style-fix.patch
netdev fix
+wrong-timeout-value-in-sk_wait_data-v2-fix.patch
+atm-fix-warning.patch
net stuff
+bluetooth-remove-the-redundant-non-seekable-llseek-method.patch
Bluetooth fix
-sunrpc-rename-rpcb_getport_external-routine.patch -sunrpc-rename-rpcb_getport-to-be-consistent-with-new-rpcb_getport_sync-name.patch -nfs-remake-nfsroot_mount-as-a-permanent-part-of-nfs-client.patch -nfs-clean-up-in-kernel-nfs-mount.patch -nfs-improve-debugging-output-in-nfs-in-kernel-mount-client.patch -nfs-new-infrastructure-for-nfs-client-in-kernel-mount-option-parsing.patch -nfs-add-functions-to-parse-nfs-mount-options-to-fs-nfs-superc.patch -nfs-implement-nfsv2-3-in-kernel-mount-option-parsing.patch -nfs-add-functions-to-parse-nfs4-mount-options-to-fs-nfs-superc.patch -nfs-move-nfs_copy_user_string.patch -nfs-more-nfs4-in-kernel-mount-option-parsing-infrastructure.patch -nfs-integrate-support-for-processing-nfs4-mount-options-in-fs-nfs-superc.patch
Dropped, being redone
-serial-use-resource_size_t-for-port-io-addresses.patch -serial-set-dtr-in-uart-for-kernel-serial-console.patch
Dropped
+gregkh-pci-pci_bridge-device.patch
PCI tree update
+allow-aer-to-build-for-config_acpi-=-n.patch
AER fix
+git-scsi-misc-fixup.patch
Fix rejects in git-scsi-misc.patch
+remove-dead-references-to-module_parm-macro.patch +scsi-lpfc-lpfc_initc-remove-unused-variable.patch
scsi updates
+block-device-elevator-use-list_for_each_entry-instead-of-list_for_each.patch
elevator cleanup
+sparc32-build-fix.patch
Fix sparc32 build
+gregkh-usb-usb-set-default-y-for-config_usb_device_class.patch +gregkh-usb-usblp-don-t-let-suspend-to-kill-used.patch +gregkh-usb-usb-usb-gadgets-avoid-le-16-32-_to_cpup.patch +gregkh-usb-usb-unusual_dev-sync-up-some-reported-devices-from-ubuntu.patch +gregkh-usb-usb-oti6858-usb-serial-driver.patch +gregkh-usb-usbmon-add-class-for-binary-interface.patch +gregkh-usb-usb-add-usb-persist-facility.patch +gregkh-usb-usb-ehci-ohci-handover-changes.patch +gregkh-usb-usb-add-reset_resume-device-quirk.patch +gregkh-usb-usb-ehci-fix-handover-for-designated-full-speed-ports.patch +gregkh-usb-usb-make-device-reset-stop-retrying-after-disconnect.patch +gregkh-usb-usb-io_ti-digi-edgeport-update-for-new-devices.patch +gregkh-usb-usb-patch-to-align-the-various-usb-timers-to-fire-at-the-same-time.patch +gregkh-usb-usb-rts-cts-handshaking-support-dtr-fixes-for-mct-u232-serial-adapter.patch +gregkh-usb-usb-usb-gadget-dead-config-cleanup.patch +gregkh-usb-usb-add-usb_device_and_interface_info-for-device-matching.patch +gregkh-usb-usb-hubc-loops-forever-on-resume-from-ram-due-to-bluetooth.patch +gregkh-usb-usb-prevent-char-device-open-deregister-race.patch +gregkh-usb-usb-rework-c-style-comments.patch +gregkh-usb-usb-ftdi_sioc-allow-setting-latency-timer-on-ft232rl.patch +gregkh-usb-usb-ehci-big-endian-data-structures-support.patch +gregkh-usb-usb-set-config_usb_ehci_big_endian_mmio-_desc-in-usb-host-kconfig.patch +gregkh-usb-usb-ehci_fsl-update-for-mpc831x-support.patch +gregkh-usb-usb-use-function-attribute-__maybe_unused.patch +gregkh-usb-usb-export-linux-usb_gadgetfs-as-linux-usb-gadgetfsh.patch +gregkh-usb-usb-visor-driver-adapted-to-new-tty-buffering.patch +gregkh-usb-usb-ti-serial-driver-sleeps-with-spinlock-held.patch +gregkh-usb-usb-digi-acceleport-adapted-to-new-tty-buffering.patch +gregkh-usb-usb-generic-usb-serial-to-new-buffering-scheme.patch +gregkh-usb-pl2303c-patch.patch +gregkh-usb-usb-usb-serial-gadget-sparse-fixes.patch +gregkh-usb-usb-core-hubc-prevent-re-enumeration-on-hnp.patch +gregkh-usb-usb-introduce-usb_anchor.patch +gregkh-usb-usb-usb-skeleton-use-anchor-to-implement-flush.patch +gregkh-usb-usb-whiteheat-driver-update.patch +gregkh-usb-usb-digi_acceleport-further-buffer-clean-up.patch +gregkh-usb-usb-ehci-safe-endianness-for-transfer-buffers-after-reset-in-case-of-hub-with-tt.patch
USB tree updates
+make-usb-autosuspend-timer-1-sec-jiffy-aligned.patch +drivers-block-ubc-use-list_for_each_entry.patch
USB fixes
+use-list_for_each_entry-for-iteration-in-prism-54-driver.patch +b44-ssb-fix-an-invalid-pointer-casting.patch
Wireless fixes
+x86_64-mm-via-no-dac.patch +x86_64-mm-bug-in-i386-mtrr-initialization.patch +x86_64-mm-mtrr-sections.patch +x86_64-mm-allocate-sparsemem-memmap-above-4g-on-x86_64.patch +x86_64-mm-asm-ptrace_h-needs-linux-compiler_h.patch +x86_64-mm-gcc-hot-cold.patch +x86_64-mm-on-cpu-single.patch +x86_64-mm-xen-add-an-mm-argument-to-alloc_pt.patch +x86_64-mm-xen-add-a-hook-for-once-the-allocator-is-ready.patch +x86_64-mm-xen-increase-irq-limit.patch +x86_64-mm-xen-unstatic-leave_mm.patch +x86_64-mm-xen-unstatic-smp_store_cpu_info.patch +x86_64-mm-xen-make-siblingmap-functions-visible.patch +x86_64-mm-xen-export-__supported_pte_mask.patch +x86_64-mm-xen-core-xen-implementation.patch -x86_64-mm-core-xen-implementation.patch -x86_64-mm-xen-event-channels.patch +x86_64-mm-xen-xen-event-channels.patch +x86_64-mm-xen-add-pinned-page-flag.patch -x86_64-mm-xen-fix-multicall-batching.patch -x86_64-mm-xen-deal-with-negative-stolen-time.patch +x86_64-mm-xen-hack-to-prevent-bad-segment-register-reload.patch -x86_64-mm-xen-add-early-printk-support-via-hvc-console.patch -x86_64-mm-xen-rename-xen-netif_-structures-to-xen_netif.patch +revert-x86_64-mm-allocate-sparsemem-memmap-above-4g-on-x86_64.patch
x86 tree updates
-mmconfig-x86_64-i386-insert-unclaimed-mmconfig-resources-fix.patch -mmconfig-x86_64-i386-insert-unclaimed-mmconfig-resources-update.patch
Folded into mmconfig-x86_64-i386-insert-unclaimed-mmconfig-resources.patch
+x86_64-pm_trace-support.patch +make-alt-sysrq-p-display-the-debug-register-contents.patch +i386-flush_tlb_kernel_range-add-reference-to-the-arguments.patch
x86 things
+add-select-phylib-to-the-ucc_geth-kconfig-option.patch +m68k-parenthesis-balance.patch
+msi-fix-the-ordering-of-msix-irqs.patch +msi-mask-the-msix-vector-before-we-unmap-it.patch +potential-parse-error-in-ifdef.patch +potential-parse-error-in-ifdef-fix.patch +potential-parse-error-in-ifdef-update.patch +pci_ids-update-patch-for-intel-ich9m.patch +x86-fix-oprofile-double-free-was-re-multiple-free.patch +work-around-dell-e520-bios-reboot-bug.patch +skeletonfb-fix-of-xxxfb_setup-ifdef.patch +vt8623fb-arkfb-null-pointer-dereference-fix.patch +cfag12864bfb-use-sys_-instead-of-cfb_-framebuffer-accessors.patch +fbdev-move-declaration-of-fb_class-to-linux-fbh.patch +misc-tifm_7xx1-replace-deprecated-irq-flag.patch +add-a-trivial-patch-style-checker-v2.patch +rtc-use-fallback-irq-if-pnp-tables-dont-provide-one.patch +memory-hotplug-fix-unnecessary-calling-of-init_currenty_empty_zone.patch +missing-include-linux-mmh-in-drivers-sbus-char-flashc.patch +tty-fix-leakage-of-erestartsys-to-userland.patch +isdn4linux-fix-maturity-label-v4.patch +prism54-maintainers-update.patch +aacraid-fix-shutdown-handler-to-also-disable-interrupts.patch +atmel_spi-dma-address-bugfix.patch +neofb-fix-pseudo_palette-array-overrun-in-neofb_setcolreg.patch +ramfs-nommu-a-bug-in-ramfs_nommu_resize-function-passing-old-size-to-vmtruncate.patch +h8300-trival-patches.patch +vmscan-give-referenced-active-and-unmapped-pages-a-second-trip-around-the-lru.patch
2.6.22 probable-queue
+rework-ptep_set_access_flags-and-fix-sun4c.patch +unmap_vm_area-becomes-unmap_kernel_range-for-the-public.patch
MM updates
-lazy-freeing-of-memory-through-madv_free.patch -restore-madv_dontneed-to-its-original-linux-behaviour.patch
Dropped
-add-__gfp_movable-for-callers-to-flag-allocations-from-high-memory-that-may-be-migrated-fix-alloc_zeroed_user_highpage-on-m68knommu.patch -add-__gfp_movable-for-callers-to-flag-allocations-from-high-memory-that-may-be-migrated-mark-bio_alloc-allocations-correctly.patch -add-__gfp_movable-for-callers-to-flag-allocations-from-high-memory-that-may-be-migrated-rename-gfp_high_movable-to-gfp_highuser_movable.patch -add-__gfp_movable-for-callers-to-flag-allocations-from-high-memory-that-may-be-migrated-mark-page-cache-pages-as-__gfp_pagecache-instead-of-__gfp_movable.patch
Folded into add-__gfp_movable-for-callers-to-flag-allocations-from-high-memory-that-may-be-migrated.patch
-move-free-pages-between-lists-on-steal-anti-fragmentation-switch-over-to-pfn_valid_within.patch
Folded into move-free-pages-between-lists-on-steal.patch
-group-short-lived-and-reclaimable-kernel-allocations-use-slab_account_reclaim-to-determine-when-__gfp_reclaimable-should-be-used.patch -group-short-lived-and-reclaimable-kernel-allocations-use-slab_account_reclaim-to-determine-when-__gfp_reclaimable-should-be-used-fix.patch -group-short-lived-and-reclaimable-kernel-allocations-do-not-annotate-shmem-allocations-explicitly.patch -group-short-lived-and-reclaimable-kernel-allocations-add-__gfp_temporary-to-identify-allocations-that-are-short-lived.patch
Folded into group-short-lived-and-reclaimable-kernel-allocations.patch
-dont-group-high-order-atomic-allocations-remove-unused-parameter-to-allocflags_to_migratetype.patch
Folded into dont-group-high-order-atomic-allocations.patch
+breakout-page_order-to-internalh-to-avoid-special-knowledge-of-the-buddy-allocator.patch
Update the page mobility patches in -mm
+slub-change-error-reporting-format-to-follow-lockdep-loosely.patch +slub-change-error-reporting-format-to-follow-lockdep-loosely-fix.patch
Slub updates
+freezer-make-kernel-threads-nonfreezable-by-default.patch +freezer-make-kernel-threads-nonfreezable-by-default-fix.patch +freezer-make-kernel-threads-nonfreezable-by-default-fix-fix.patch
Freezer fixes
+blackfin-enable-arbitary-speed-serial-setting.patch
blackfin driver update
+h8300-enable-arbitary-speed-tty-port-setup.patch
tty work
+arm26-enable-arbitary-speed-tty-ioctls-and-split.patch +arm26-remove-broken-and-unused-macro.patch
arm26 updates
+freezer-run-show_state-when-freezing-times-out.patch +pm-do-not-require-dev-spew-to-get-pm_debug.patch +swsusp-remove-incorrect-code-from-userc.patch +swsusp-remove-code-duplication-between-diskc-and-userc.patch +swsusp-introduce-restore-platform-operations.patch +swsusp-fix-hibernation-code-ordering.patch +hibernation-prepare-to-enter-the-low-power-state.patch +freezer-avoid-freezing-kernel-threads-prematurely.patch +freezer-use-__set_current_state-in-refrigerator.patch +freezer-return-int-from-freeze_processes.patch +freezer-remove-redundant-check-in-try_to_freeze_tasks.patch
freezer/swsusp updates
+m32r-enable-arbitary-speed-tty-rate-setting.patch
tty work
+etrax-enable-arbitary-speed-setting-on-tty-ports.patch +cris-replace-old-style-member-inits-with-designated-inits.patch
CRIS updates
+v850-enable-arbitary-speed-tty-ioctls.patch
TTY work
-add-lzo1x-compression-support-to-the-kernel.patch -add-lzo1x-compression-support-to-the-kernel-fix.patch -add-lzo1x-compression-support-to-the-kernel-tidy.patch
Dropped
-add-notime-boot-option.patch
Dropped
+define-new-percpu-interface-for-shared-data.patch +use-the-new-percpu-interface-for-shared-data.patch +introduce-config_virt_to_bus.patch +pie-randomization.patch +remove-unused-tif_notify_resume-flag.patch +rocketc-fix-unchecked-mutex_lock_interruptible.patch +only-send-sigxfsz-when-exceeding-rlimits.patch +rtc-ratelimit-lost-interrupts-message.patch +reduce-cpusetc-write_lock_irq-to-read_lock.patch +reduce-cpusetc-write_lock_irq-to-read_lock-fix.patch +char-n_hdlc-allow-restartsys-retval-of-tty-write.patch +afs-implement-file-locking.patch +tty_io-use-kzalloc.patch +remove-clockevents_releaserequest_device.patch +kconfig-no-strange-misc-devices.patch +afs-drop-explicit-extern.patch +remove-useless-tolower-in-isofs.patch +char-mxser_new-fix-sparse-warning.patch +char-tty_ioctl-use-wait_event_interruptible_timeout.patch +char-tty_ioctl-little-whitespace-cleanup.patch +char-genrtc-use-wait_event_interruptible.patch +char-n_r3964-use-wait_event_interruptible.patch +char-ip2-use-msleep-for-sleeping.patch +proc-environ-wrong-placing-of-ptrace_may_attach-check.patch +udf-coding-style-conversion-lindent.patch +udf-coding-style-conversion-lindent-fixups.patch +ext2-fix-a-comment-when-ext2_release_file-is-called.patch +mutex_unlock-later-in-seq_lseek.patch +zs-move-to-the-serial-subsystem.patch +fs-block_devc-use-list_for_each_entry.patch +fault-injection-add-min-order-parameter-to-fail_page_alloc.patch +fault-injection-fix-example-scripts-in-documentation.patch +add-printktime-option-deprecate-time.patch +fs-clarify-dummy-member-in-struct.patch +dma-mapping-prevent-dma-dependent-code-from-linking-on.patch
Misc
-ext4-extent-overlap-bugfix.patch -ext4-persistent_allocation_1_ioctl_and_unitialized_extents.patch -ext4-persistent_allocation_2_support_for_writing_to_unitialized_extent.patch +ext4-ext4_remove_exported_symbles.patch +ext4-ext4-fallocate-4-extent_overlap_bugfix.patch +ext4-ext4-free-blocks-on-insert-extent-failure.patch +ext4-ext4_extents_on_by_default.patch +ext4-ext4-propagate_flags.patch +ext4-ext4-extent-sanity-checks.patch +ext4-ext4-fallocate-5-ext4_support.patch +ext4-ext4-fallocate-6-uninit_write_support.patch +ext4-ext4_expand_inode_extra_isize.patch +ext4-ext4_expand_inode_isize_fix.patch +ext4-jbd-stats-through-procfs.patch +ext4-ext4_remove_subdirs_limit.patch
ext4 tree updates
+spi-add-3wire-mode-flag-fix.patch
+spidev-compiler-warning-gone.patch
SPI updates
-use-menuconfig-objects-ii-isdn.patch +update-isdn-tree-to-use-pci_get_device.patch +use-menuconfig-objects-isdn-config_isdn.patch +use-menuconfig-objects-isdn-config_isdn_i4l.patch +use-menuconfig-objects-isdn-config_isdn_drv_gigaset.patch +use-menuconfig-objects-isdn-config_isdn_capi.patch +use-menuconfig-objects-isdn-config_capi_avm.patch +use-menuconfig-objects-isdn-config_capi_eicon.patch
Update ISDN Kconfig changes
+ecryptfs-move-ecryptfs-docs-into-documentation-filesystems.patch
ecryptfs update
+rtc-rs5c372-becomes-a-new-style-i2c-driver.patch
rtc maintenance
-lguest-the-host-code-update-for-mm-simplify-boot_params.patch
Dropped
+char-moxa-eliminate-busy-waiting.patch +char-specialix-remove-busy-waiting.patch +char-riscom8-eliminate-busy-loop.patch +char-vt-use-kzalloc.patch +char-vt-use-array_size.patch +char-kconfig-mxser_new-remove-experimental-comment.patch
char driver updates
+fbcon-cursor-blink-control.patch +fbcon-use-struct-device-instead-of-struct-class_device.patch +fbdev-move-arch-specific-bits-to-their-respective.patch +fbdev-detect-primary-display-device.patch +fbcon-allow-fbcon-to-use-the-primary-display-driver.patch +fbcon-allow-fbcon-to-use-the-primary-display-driver-fix.patch +fbcon-allow-fbcon-to-use-the-primary-display-driver-fix-2.patch
fbdev things
+fs-introduce-vfs_path_lookup.patch
+sunrpc-use-vfs_path_lookup.patch
+nfsctl-use-vfs_path_lookup.patch
+fs-mark-link_path_walk-static.patch
+fs-remove-path_walk-export.patch
VFS updates
+cfs-scheduler-v14-rc2-mm1.patch
CFS update
+mm-swap-prefetch-increase-aggressiveness-and-tunability.patch
swap prefetch update
+kernel-doc-add-tools-doc-in-makefile.patch +kernel-doc-fix-unnamed-struct-union-warning.patch +kernel-doc-strip-c99-comments.patch +kernel-doc-fix-leading-dot-in-man-mode-output.patch +kernel-doc-fix-leading-dot-in-man-mode-output-fix.patch
kernel-doc stuff
+coredump-masking-bound-suid_dumpable-sysctl.patch +coredump-masking-reimplementation-of-dumpable-using-two-flags.patch +coredump-masking-reimplementation-of-dumpable-using-two-flags-fix.patch +coredump-masking-add-an-interface-for-core-dump-filter.patch +coredump-masking-elf-enable-core-dump-filtering.patch +coredump-masking-elf-fdpic-remove-an-unused-argument.patch +coredump-masking-elf-fdpic-enable-core-dump-filtering.patch +coredump-masking-documentation-for-proc-pid-coredump_filter.patch
Filtering for waht the core dumper will dump
+containersv10-basic-container-framework.patch +containersv10-basic-container-framework-fix.patch +containersv10-example-cpu-accounting-subsystem.patch +containersv10-example-cpu-accounting-subsystem-fix.patch +containersv10-add-tasks-file-interface.patch +containersv10-add-tasks-file-interface-fix.patch +containersv10-add-fork-exit-hooks.patch +containersv10-add-fork-exit-hooks-fix.patch +containersv10-add-container_clone-interface.patch +containersv10-add-container_clone-interface-fix.patch +containersv10-add-procfs-interface.patch +containersv10-add-procfs-interface-fix.patch +containersv10-make-cpusets-a-client-of-containers.patch +containersv10-share-css_group-arrays-between-tasks-with-same-container-memberships.patch +containersv10-share-css_group-arrays-between-tasks-with-same-container-memberships-fix.patch +containersv10-simple-debug-info-subsystem.patch +containersv10-simple-debug-info-subsystem-fix.patch +containersv10-simple-debug-info-subsystem-fix-2.patch +containersv10-support-for-automatic-userspace-release-agents.patch
Containers core
+lockdep-sanitise-config_prove_locking.patch +lockdep-reduce-the-ifdeffery.patch +lockstat-core-infrastructure.patch +lockstat-core-infrastructure-fix.patch +lockstat-core-infrastructure-fix-fix.patch +lockstat-human-readability-tweaks.patch +lockstat-hook-into-spinlock_t-rwlock_t-rwsem-and-mutex.patch
lockstat-via-lockdep
-reiser4-use-lzo-library-functions.patch
Dropped
+update-page-order-at-an-appropriate-time-when-tracking-page_owner.patch
Update page-owner-tracking for updates to Mel's stuff
-vdso-print-fatal-signals-fix.patch
Dropped
All 993 patches:
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc3/2.6.22-rc3-mm1/patch-list
Quoted 2 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc3/2.6.22-rc3-mm1/
With
Quoted 1 line
+dma-mapping-prevent-dma-dependent-code-from-linking-on.patch
scsi fails to build on !HAS_DMA architectures:
drivers/built-in.o(.text+0x20af6): In function `scsi_dma_map':
: undefined reference to dma_map_sg' drivers/built-in.o(.text+0x20b5c): In function scsi_dma_unmap':
: undefined reference to `dma_unmap_sg'
I split those functions out into a new file. Builds on s390 and i386.
scsi: Don't build scsi_dma_{map,unmap} for !HAS_DMA
Move scsi_dma_{map,unmap} into scsi_lib_dma.c which is only build if HAS_DMA is set.
--- drivers/scsi/Kconfig | 5 ++++ drivers/scsi/Makefile | 6 ++--- drivers/scsi/scsi_lib.c | 38 --------------------------------- drivers/scsi/scsi_lib_dma.c | 50 ++++++++++++++++++++++++++++++++++++++++++++ include/scsi/scsi_cmnd.h | 2 + 5 files changed, 60 insertions(+), 41 deletions(-)
drivers/scsi/Kconfig +5 -0
@@ -10,6 +10,7 @@ config RAID_ATTRS config SCSI tristate "SCSI device support" depends on BLOCK + select SCSI_DMA if HAS_DMA ---help--- If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or any other SCSI device under Linux, say Y and make sure that you know
@@ -29,6 +30,10 @@ config SCSI However, do not compile this as a module if your root file system (the one containing the directory /) is located on a SCSI device. +config SCSI_DMA + bool + default n + config SCSI_TGT tristate "SCSI target support" depends on SCSI && EXPERIMENTAL
drivers/scsi/Makefile +3 -3
@@ -145,9 +145,9 @@ obj-$(CONFIG_SCSI_DEBUG) += scsi_debug.o obj-$(CONFIG_SCSI_WAIT_SCAN) += scsi_wait_scan.o scsi_mod-y += scsi.o hosts.o scsi_ioctl.o constants.o \ - scsicam.o scsi_error.o scsi_lib.o \ - scsi_scan.o scsi_sysfs.o \ - scsi_devinfo.o + scsicam.o scsi_error.o scsi_lib.o +scsi_mod-$(CONFIG_SCSI_DMA) += scsi_lib_dma.o +scsi_mod-y += scsi_scan.o scsi_sysfs.o scsi_devinfo.o scsi_mod-$(CONFIG_SCSI_NETLINK) += scsi_netlink.o scsi_mod-$(CONFIG_SYSCTL) += scsi_sysctl.o scsi_mod-$(CONFIG_SCSI_PROC_FS) += scsi_proc.o
drivers/scsi/scsi_lib.c +0 -38
@@ -2290,41 +2290,3 @@ void scsi_kunmap_atomic_sg(void *virt)kunmap_atomic (virt,KM_BIO_SRC_IRQ ); }EXPORT_SYMBOL (scsi_kunmap_atomic_sg); - -/** -* scsi_dma_map - perform DMA mapping against command's sg lists -* @cmd: scsi command -* -* Returns the number of sg lists actually used, zero if the sg lists -* is NULL, or -ENOMEM if the mapping failed. -*/ -int scsi_dma_map (struct scsi_cmnd *cmd) -{ -int nseg =0 ; - -if (scsi_sg_count (cmd)) { -struct device *dev = cmd->device->host->shost_gendev.parent; - - nseg =dma_map_sg (dev,scsi_sglist (cmd),scsi_sg_count (cmd), - cmd->sc_data_direction); -if (unlikely (!nseg)) -return -ENOMEM ; - } -return nseg; -} -EXPORT_SYMBOL (scsi_dma_map); - -/** -* scsi_dma_unmap - unmap command's sg lists mapped by scsi_dma_map -* @cmd: scsi command -*/ -void scsi_dma_unmap (struct scsi_cmnd *cmd) -{ -if (scsi_sg_count (cmd)) { -struct device *dev = cmd->device->host->shost_gendev.parent; - -dma_unmap_sg (dev,scsi_sglist (cmd),scsi_sg_count (cmd), - cmd->sc_data_direction); - } -} -EXPORT_SYMBOL (scsi_dma_unmap);
include/scsi/scsi_cmnd.h +2 -0
@@ -135,8 +135,10 @@ extern void scsi_kunmap_atomic_sg(void *extern struct scatterlist *scsi_alloc_sgtable (struct scsi_cmnd *,gfp_t );extern void scsi_free_sgtable (struct scatterlist *,int ); +#ifdef CONFIG_SCSI_DMA extern int scsi_dma_map (struct scsi_cmnd *cmd);extern void scsi_dma_unmap (struct scsi_cmnd *cmd); +#endif #define scsi_sg_count (cmd) ((cmd)->use_sg)#define scsi_sglist (cmd) ((struct scatterlist *)(cmd)->request_buffer)
drivers/scsi/scsi_lib_dma.c new file +50 -0
50 lines not on this page · raw message
Quoted 1 line · Cornelia Huck
I split those functions out into a new file. Builds on s390 and i386.
Why not just put #ifdef CONFIG_HAS_DMA / #endif around the pair of functions? I don't see the need to add a new Kconfig symbol and a new file for this.
Quoted 6 lines · Matthew Wilcox
Quoted 1 line · Cornelia Huck
I split those functions out into a new file. Builds on s390 and i386.
Why not just put #ifdef
CONFIG_HAS_DMA/ #endif around the pair of functions? I don't see the need to add a newKconfigsymbol and a new file for this.
I prefer a new file over #ifdefs in c files. (New dma-dependent stuff would also have a place where it could go to.)
But I'll do whatever ends up as consensus :)
Quoted 5 lines · Cornelia Huck
Quoted 2 lines · Matthew Wilcox
Quoted 1 line · Cornelia Huck
I split those functions out into a new file. Builds on s390 and i386.
Quoted 8 lines
Quoted 3 lines
Why not just put #ifdef
CONFIG_HAS_DMA/ #endif around the pair of functions? I don't see the need to add a newKconfigsymbol and a new file for this.I prefer a new file over #ifdefs in c files. (New dma-dependent stuff would also have a place where it could go to.)
But I'll do whatever ends up as consensus :)
50 lines isn't much need for a new file.
Jeff
Quoted 10 lines · Jeff Garzik
Quoted 9 lines · Cornelia Huck
Quoted 5 lines · Matthew Wilcox
Quoted 1 line · Cornelia Huck
I split those functions out into a new file. Builds on s390 and i386.
Why not just put #ifdef
CONFIG_HAS_DMA/ #endif around the pair of functions? I don't see the need to add a newKconfigsymbol and a new file for this.
Quoted 6 lines
Quoted 4 lines
I prefer a new file over #ifdefs in c files. (New dma-dependent stuff would also have a place where it could go to.)
But I'll do whatever ends up as consensus :)
50 lines isn't much need for a new file.
OK, so here's an alternative patch:
scsi: Don't build scsi_dma_{map,unmap} for !HAS_DMA
Use #ifdef CONFIG_HAS_DMA for the two dma-dependent functions.
--- drivers/scsi/scsi_lib.c | 2 ++ include/scsi/scsi_cmnd.h | 2 ++ 2 files changed, 4 insertions(+)
drivers/scsi/scsi_lib.c +2 -0
@@ -2291,6 +2291,7 @@ void scsi_kunmap_atomic_sg(void *virt) }EXPORT_SYMBOL (scsi_kunmap_atomic_sg); +#ifdef CONFIG_HAS_DMA /** * scsi_dma_map - perform DMA mapping against command's sg lists * @cmd: scsi command
@@ -2328,3 +2329,4 @@ void scsi_dma_unmap(struct scsi_cmnd *cm } }EXPORT_SYMBOL (scsi_dma_unmap); +#endif
include/scsi/scsi_cmnd.h +2 -0
@@ -135,8 +135,10 @@ extern void scsi_kunmap_atomic_sg(void *extern struct scatterlist *scsi_alloc_sgtable (struct scsi_cmnd *,gfp_t );extern void scsi_free_sgtable (struct scatterlist *,int ); +#ifdef CONFIG_HAS_DMA extern int scsi_dma_map (struct scsi_cmnd *cmd);extern void scsi_dma_unmap (struct scsi_cmnd *cmd); +#endif #define scsi_sg_count (cmd) ((cmd)->use_sg)#define scsi_sglist (cmd) ((struct scatterlist *)(cmd)->request_buffer)
Quoted 10 lines · Jeff Garzik
Quoted 9 lines · Cornelia Huck
Quoted 5 lines · Matthew Wilcox
Quoted 1 line · Cornelia Huck
I split those functions out into a new file. Builds on s390 and i386.
Why not just put #ifdef
CONFIG_HAS_DMA/ #endif around the pair of functions? I don't see the need to add a newKconfigsymbol and a new file for this.
Quoted 6 lines
Quoted 4 lines
I prefer a new file over #ifdefs in c files. (New dma-dependent stuff would also have a place where it could go to.)
But I'll do whatever ends up as consensus :)
50 lines isn't much need for a new file.
The scsi core shouldn't know anything about dma mappings, so a separate file is a good idea just to keep the separation clean.
Andrew Morton
maintainerQuoted 14 lines · On Thu, 31 May 2007 16:13:38 +0100 Christoph Hellwig <[email protected]> wrote:
Quoted 13 lines · Jeff Garzik
Quoted 12 lines · Cornelia Huck
Quoted 5 lines · Matthew Wilcox
Quoted 1 line · Cornelia Huck
I split those functions out into a new file. Builds on s390 and i386.
Why not just put #ifdef
CONFIG_HAS_DMA/ #endif around the pair of functions? I don't see the need to add a newKconfigsymbol and a new file for this.I prefer a new file over #ifdefs in c files. (New dma-dependent stuff would also have a place where it could go to.)
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
But I'll do whatever ends up as consensus :)
50 lines isn't much need for a new file.
The scsi core shouldn't know anything about dma mappings, so a separate file is a good idea just to keep the separation clean.
ok, let's go this way.
Cornelia, afaict your patch has no actual delendency upon Dan's dma-mapping-prevent-dma-dependent-code-from-linking-on.patch, correct? If so, I can merge it via James and then merge Dan's patch once James has merged.
If there is a dependency then I guess I merge both into a single diff and merge it all in one hit.
btw, this:
include/scsi/scsi_cmnd.h renamed from include/scsi/scsi_cmnd.h~scsi-dont-build-scsi_dma_mapunmap-for-has_dma +2 -0
@@ -135,8 +135,10 @@ extern void scsi_kunmap_atomic_sg(void *extern struct scatterlist *scsi_alloc_sgtable (struct scsi_cmnd *,gfp_t );extern void scsi_free_sgtable (struct scatterlist *,int ); +#ifdef CONFIG_SCSI_DMA extern int scsi_dma_map (struct scsi_cmnd *cmd);extern void scsi_dma_unmap (struct scsi_cmnd *cmd); +#endif #define scsi_sg_count (cmd) ((cmd)->use_sg)#define scsi_sglist (cmd) ((struct scatterlist *)(cmd)->request_buffer)
We don't really need the ifdefs here. If someone incorrectly calls these functions then they'll get a link-time failure anyway. The downside of removing these ifdefs is that they won't get a compile-time warning, but I tend to think that this small cost is worth it.
Quoted 4 lines · Andrew Morton
Cornelia, afaict your patch has no actual delendency upon Dan's dma-mapping-prevent-dma-dependent-code-from-linking-on.patch, correct? If so, I can merge it via James and then merge Dan's patch once James has merged.
AFAICS there's no dependency in that direction.
Quoted 15 lines
diff -puN
include/scsi/scsi_cmnd.h~scsi-dont-build-scsi_dma_mapunmap-for-has_dmainclude/scsi/scsi_cmnd.hinclude/scsi/scsi_cmnd.h renamed from include/scsi/scsi_cmnd.h~scsi-dont-build-scsi_dma_mapunmap-for-has_dma +2
-0@@ -135,8 +135,10 @@ extern void scsi_kunmap_atomic_sg(void *extern struct scatterlist *scsi_alloc_sgtable (struct scsi_cmnd *,gfp_t );extern void scsi_free_sgtable (struct scatterlist *,int ); +#ifdef CONFIG_SCSI_DMA extern int scsi_dma_map (struct scsi_cmnd *cmd);extern void scsi_dma_unmap (struct scsi_cmnd *cmd); +#endif #define scsi_sg_count (cmd) ((cmd)->use_sg)#define scsi_sglist (cmd) ((struct scatterlist *)(cmd)->request_buffer)
Quoted 4 lines
We don't really need the ifdefs here. If someone incorrectly calls these functions then they'll get a link-time failure anyway. The downside of removing these ifdefs is that they won't get a compile-time warning, but I tend to think that this small cost is worth it.
OK, fine with me.
Hi,
Andrew Morton napisał(a):
Quoted 2 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc3/2.6.22-rc3-mm1/
FYI suspend to disk doesn't work anymore on my box, system hangs after "Suspending console(s)" message.
[ 186.297753] Shrinking memory... -\|/-\|done (113064 pages freed) [ 187.841914] Freed 452256 kbytes in 1.54 seconds (293.67 MB/s) [ 187.847730] Suspending console(s)
http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/2.6.22-rc3-mm1/console.log
http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/2.6.22-rc3-mm1/mm-config
Regards,
Michal
Signature · 2 lines
"Najbardziej brakowało mi twojego milczenia." -- Andrzej Sapkowski "Coś więcej"
Hi,
Andrew Morton napisał(a):
Quoted 2 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc3/2.6.22-rc3-mm1/
FYI suspend to disk doesn't work anymore on my box, system hangs after "Suspending console(s)" message.
[ 186.297753] Shrinking memory... -\|/-\|done (113064 pages freed) [ 187.841914] Freed 452256 kbytes in 1.54 seconds (293.67 MB/s) [ 187.847730] Suspending console(s)
http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/2.6.22-rc3-mm1/console.log
http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/2.6.22-rc3-mm1/mm-config
Regards,
Michal
Signature · 2 lines
"Najbardziej brakowało mi twojego milczenia." -- Andrzej Sapkowski "Coś więcej"
Quoted 6 lines · Michal Piotrowski
Hi,
Andrew Morton napisał(a):
Quoted 2 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc3/2.6.22-rc3-mm1/
Quoted 8 lines
FYI suspend to disk doesn't work anymore on my box, system hangs after "Suspending console(s)" message.
[ 186.297753] Shrinking memory... -\|/-\|done (113064 pages freed) [ 187.841914] Freed 452256 kbytes in 1.54 seconds (293.67 MB/s) [ 187.847730] Suspending console(s)http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/2.6.22-rc3-mm1/console.log
http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/2.6.22-rc3-mm1/mm-config
Hmm, that might be a couple of things, actually.
To see if the patches directly related to hibernation/suspend cause this, can you please test 2.6.22-rc3 with the patch series at
http://www.sisk.pl/kernel/hibernation_and_suspend/2.6.22-rc3/patches/
applied?
Greetings,
Rafael
PATCH 1/1 Freezer: migration_thread should not be freezable (was: Re: [linux-pm] Re: 2.6.22-rc3-mm1)
Quoted 16 lines · Rafael J. Wysocki
Quoted 6 lines · Michal Piotrowski
Hi,
Andrew Morton napisał(a):
Quoted 2 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc3/2.6.22-rc3-mm1/
Quoted 8 lines
FYI suspend to disk doesn't work anymore on my box, system hangs after "Suspending console(s)" message.
[ 186.297753] Shrinking memory... -\|/-\|done (113064 pages freed) [ 187.841914] Freed 452256 kbytes in 1.54 seconds (293.67 MB/s) [ 187.847730] Suspending console(s)http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/2.6.22-rc3-mm1/console.log
http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/2.6.22-rc3-mm1/mm-config
Quoted 8 lines
Hmm, that might be a couple of things, actually.
To see if the patches directly related to hibernation/suspend cause this, can you please test 2.6.22-rc3 with the patch series at
http://www.sisk.pl/kernel/hibernation_and_suspend/2.6.22-rc3/patches/
applied?
Ahem, I broke it. :-(
Andrew, the following fix is needed on top of freezer-make-kernel-threads-nonfreezable-by-default.patch
---
From: Rafael J. Wysocki <[email protected]>
migration_thread should not be freezable, or it will break hibernation and suspend on SMP.
--- kernel/sched.c | 3 --- 1 file changed, 3 deletions(-)
kernel/sched.c +0 -3
@@ -5157,13 +5157,10 @@ static int migration_thread(void *data)BUG_ON (rq->migration_thread != current);set_current_state (TASK_INTERRUPTIBLE ); -set_freezable ();while (!kthread_should_stop ()) {struct migration_req *req;struct list_head *head; -try_to_freeze (); -spin_lock_irq (&rq->lock);if (cpu_is_offline (cpu)) {
Re: [PATCH -mm] Freezer: migration_thread should not be freezable (was: Re: Re: 2.6.22-rc3-mm1)
Quoted 28 lines · Rafael J. Wysocki
Quoted 16 lines · Rafael J. Wysocki
Quoted 6 lines · Michal Piotrowski
Hi,
Andrew Morton napisał(a):
Quoted 2 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc3/2.6.22-rc3-mm1/
Quoted 8 lines
FYI suspend to disk doesn't work anymore on my box, system hangs after "Suspending console(s)" message.
[ 186.297753] Shrinking memory... -\|/-\|done (113064 pages freed) [ 187.841914] Freed 452256 kbytes in 1.54 seconds (293.67 MB/s) [ 187.847730] Suspending console(s)http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/2.6.22-rc3-mm1/console.log
http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/2.6.22-rc3-mm1/mm-configQuoted 8 lines
Hmm, that might be a couple of things, actually.
To see if the patches directly related to hibernation/suspend cause this, can you please test 2.6.22-rc3 with the patch series at
http://www.sisk.pl/kernel/hibernation_and_suspend/2.6.22-rc3/patches/
applied?
Ahem, I broke it. :-(
Quoted 9 lines
Andrew, the following fix is needed on top of freezer-make-kernel-threads-nonfreezable-by-default.patch
---
From: Rafael J. Wysocki <[email protected]>
migration_threadshould not be freezable, or it will break hibernation and suspend on SMP.
Problem fixed, suspend to disk works fine. Huge thanks!
Regards,
Michal
Signature · 2 lines
"Najbardziej brakowało mi twojego milczenia." -- Andrzej Sapkowski "Coś więcej"
Quoted 16 lines · Rafael J. Wysocki
Quoted 6 lines · Michal Piotrowski
Hi,
Andrew Morton napisał(a):
Quoted 2 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc3/2.6.22-rc3-mm1/
Quoted 8 lines
FYI suspend to disk doesn't work anymore on my box, system hangs after "Suspending console(s)" message.
[ 186.297753] Shrinking memory... -\|/-\|done (113064 pages freed) [ 187.841914] Freed 452256 kbytes in 1.54 seconds (293.67 MB/s) [ 187.847730] Suspending console(s)http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/2.6.22-rc3-mm1/console.log
http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/2.6.22-rc3-mm1/mm-config
Quoted 8 lines
Hmm, that might be a couple of things, actually.
To see if the patches directly related to hibernation/suspend cause this, can you please test 2.6.22-rc3 with the patch series at
http://www.sisk.pl/kernel/hibernation_and_suspend/2.6.22-rc3/patches/
applied?
Ok, bug is in suspend tree.
Quoted 4 lines
Greetings,
Rafael
Regards,
Michal
Signature · 2 lines
"Najbardziej brakowało mi twojego milczenia." -- Andrzej Sapkowski "Coś więcej"
Quoted 19 lines · Michal Piotrowski
Quoted 18 lines · Rafael J. Wysocki
Quoted 6 lines · Michal Piotrowski
Hi,
Andrew Morton napisał(a):
Quoted 2 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc3/2.6.22-rc3-mm1/
Quoted 8 lines
FYI suspend to disk doesn't work anymore on my box, system hangs after "Suspending console(s)" message.
[ 186.297753] Shrinking memory... -\|/-\|done (113064 pages freed) [ 187.841914] Freed 452256 kbytes in 1.54 seconds (293.67 MB/s) [ 187.847730] Suspending console(s)http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/2.6.22-rc3-mm1/console.log
http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/2.6.22-rc3-mm1/mm-configHmm, that might be a couple of things, actually.
Quoted 8 lines
Quoted 6 lines
To see if the patches directly related to hibernation/suspend cause this, can you please test 2.6.22-rc3 with the patch series at
http://www.sisk.pl/kernel/hibernation_and_suspend/2.6.22-rc3/patches/
applied?
Ok, bug is in suspend tree.
Yup. Please see the message I've just sent (with a fix).
Rafael
Quoted 19 lines · Michal Piotrowski
Quoted 18 lines · Rafael J. Wysocki
Quoted 6 lines · Michal Piotrowski
Hi,
Andrew Morton napisał(a):
Quoted 2 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc3/2.6.22-rc3-mm1/
Quoted 8 lines
FYI suspend to disk doesn't work anymore on my box, system hangs after "Suspending console(s)" message.
[ 186.297753] Shrinking memory... -\|/-\|done (113064 pages freed) [ 187.841914] Freed 452256 kbytes in 1.54 seconds (293.67 MB/s) [ 187.847730] Suspending console(s)http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/2.6.22-rc3-mm1/console.log
http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/2.6.22-rc3-mm1/mm-configHmm, that might be a couple of things, actually.
Quoted 8 lines
Quoted 6 lines
To see if the patches directly related to hibernation/suspend cause this, can you please test 2.6.22-rc3 with the patch series at
http://www.sisk.pl/kernel/hibernation_and_suspend/2.6.22-rc3/patches/
applied?
Ok, bug is in suspend tree.
Yup. Please see the message I've just sent (with a fix).
Rafael
PATCH 1/1 Freezer: migration_thread should not be freezable (was: Re: Re: 2.6.22-rc3-mm1)
In reply to Rafael J. WysockiQuoted 16 lines · Rafael J. Wysocki
Quoted 6 lines · Michal Piotrowski
Hi,
Andrew Morton napisał(a):
Quoted 2 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc3/2.6.22-rc3-mm1/
Quoted 8 lines
FYI suspend to disk doesn't work anymore on my box, system hangs after "Suspending console(s)" message.
[ 186.297753] Shrinking memory... -\|/-\|done (113064 pages freed) [ 187.841914] Freed 452256 kbytes in 1.54 seconds (293.67 MB/s) [ 187.847730] Suspending console(s)http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/2.6.22-rc3-mm1/console.log
http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/2.6.22-rc3-mm1/mm-config
Quoted 8 lines
Hmm, that might be a couple of things, actually.
To see if the patches directly related to hibernation/suspend cause this, can you please test 2.6.22-rc3 with the patch series at
http://www.sisk.pl/kernel/hibernation_and_suspend/2.6.22-rc3/patches/
applied?
Ahem, I broke it. :-(
Andrew, the following fix is needed on top of freezer-make-kernel-threads-nonfreezable-by-default.patch
---
From: Rafael J. Wysocki <[email protected]>
migration_thread should not be freezable, or it will break hibernation and suspend on SMP.
--- kernel/sched.c | 3 --- 1 file changed, 3 deletions(-)
kernel/sched.c +0 -3
@@ -5157,13 +5157,10 @@ static int migration_thread(void *data)BUG_ON (rq->migration_thread != current);set_current_state (TASK_INTERRUPTIBLE ); -set_freezable ();while (!kthread_should_stop ()) {struct migration_req *req;struct list_head *head; -try_to_freeze (); -spin_lock_irq (&rq->lock);if (cpu_is_offline (cpu)) {
Quoted 6 lines · Michal Piotrowski
Hi,
Andrew Morton napisał(a):
Quoted 2 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc3/2.6.22-rc3-mm1/
Quoted 8 lines
FYI suspend to disk doesn't work anymore on my box, system hangs after "Suspending console(s)" message.
[ 186.297753] Shrinking memory... -\|/-\|done (113064 pages freed) [ 187.841914] Freed 452256 kbytes in 1.54 seconds (293.67 MB/s) [ 187.847730] Suspending console(s)http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/2.6.22-rc3-mm1/console.log
http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/2.6.22-rc3-mm1/mm-config
Hmm, that might be a couple of things, actually.
To see if the patches directly related to hibernation/suspend cause this, can you please test 2.6.22-rc3 with the patch series at
http://www.sisk.pl/kernel/hibernation_and_suspend/2.6.22-rc3/patches/
applied?
Greetings,
Rafael
Andrew Morton napisał(a):
Quoted 2 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc3/2.6.22-rc3-mm1/
CPU hotplug test triggered this
[ 4972.038008] CPU 1 is now offline
[ 4972.041411] lockdep: not fixing up alternatives.
[ 4972.051553]
[ 4972.051555] =================================
[ 4972.057562] [ INFO: inconsistent lock state ]
[ 4972.062056] 2.6.22-rc3-mm1 #10
[ 4972.065184] ---------------------------------
[ 4972.069663] inconsistent {in-hardirq-W} -> {hardirq-on-W} usage.
[ 4972.075758] sh/702 [HC0[0]:SC0[0]:HE1:SE1] takes:
[ 4972.080554] (&n->list_lock){++..}, at: [<c0181288>] add_partial+0xe/0x27l *0xc01812880xc0181288 is in add_partial (/home/devel/linux-mm/mm/slub.c:1193).
1188 }
1189
1190 static void add_partial(struct kmem_cache_node *n, struct page *page)
1191 {
1192 spin_lock(&n->list_lock); 1193 n->nr_partial++; 1194 list_add(&page->lru, &n->partial); 1195 spin_unlock(&n->list_lock);
1196 }
1197
[ 4972.087650] {in-hardirq-W} state was registered at:
[ 4972.092656] [<c0143bfe>] mark_lock+0x82/0x557
[ 4972.097323] [<c0144c5f>] __lock_acquire+0x476/0xd36
[ 4972.102562] [<c01455bd>] lock_acquire+0x9e/0xb8
[ 4972.107342] [<c0348993>] _spin_lock+0x38/0x62
[ 4972.111993] [<c0181d29>] deactivate_slab+0xb9/0x179
[ 4972.117300] [<c0181e56>] flush_slab+0x6d/0x72
[ 4972.122063] [<c0181e8c>] __flush_cpu_slab+0x31/0x36
[ 4972.127335] [<c0181ea5>] flush_cpu_slab+0x14/0x17
[ 4972.132401] [<c0113d6f>] smp_call_function_interrupt+0x3a/0x56
[ 4972.138607] [<c0104c73>] call_function_interrupt+0x33/0x38
[ 4972.144503] [<c0102b59>] default_idle+0x50/0x69
[ 4972.149421] [<c01023eb>] cpu_idle+0xb3/0xf8
[ 4972.153889] [<c03454fa>] rest_init+0x56/0x58
[ 4972.158402] [<c04f39c7>] start_kernel+0x351/0x359
[ 4972.163450] [<ffffffff>] 0xffffffff
[ 4972.167221] irq event stamp: 2451
[ 4972.170695] hardirqs last enabled at (2451): [<c0104228>] restore_nocheck+0x12/0x15
[ 4972.178699] hardirqs last disabled at (2449): [<c012b4e9>] __do_softirq+0x93/0xe5
[ 4972.186393] softirqs last enabled at (2450): [<c012b535>] __do_softirq+0xdf/0xe5
[ 4972.194216] softirqs last disabled at (2443): [<c0106d39>] do_softirq+0x68/0x11fl *0xc01042280xc0104228 is at include2/asm/bitops.h:246.
241 static int test_bit(int nr, const volatile void * addr);
242 #endif
243
244 static __always_inline int constant_test_bit(int nr, const volatile unsigned long *addr)
245 {
246 return ((1UL << (nr & 31)) & (addr[nr >> 5])) != 0;
247 }
248
249 static inline int variable_test_bit(int nr, const volatile unsigned long * addr)
250 {
l *0xc012b4e90xc012b4e9 is in __do_softirq (/home/devel/linux-mm/kernel/softirq.c:241).
236 pending >>= 1;
237 } while (pending);
238
239 local_irq_disable();
240
241 pending = local_softirq_pending();
242 if (pending && --max_restart)
243 goto restart;
244
245 if (pending)
l *0xc012b5350xc012b535 is in __do_softirq (/home/devel/linux-mm/kernel/softirq.c:252). 247
248 trace_softirq_exit();
249
250 account_system_vtime(current);
251 _local_bh_enable();
252 }
253
254 #ifndef __ARCH_HAS_DO_SOFTIRQ
255
256 asmlinkage void do_softirq(void)
l *0xc0106d390xc0106d39 is in do_softirq (/home/devel/linux-mm/arch/i386/kernel/irq.c:222).
217 irqctx->tinfo.previous_esp = current_stack_pointer;
218
219 /* build the stack frame on the softirq stack */
220 isp = (u32*) ((char*)irqctx + sizeof(*irqctx));
221
222 asm volatile(
223 " xchgl %%ebx,%%esp \n" 224 " call __do_softirq \n" 225 " movl %%ebx,%%esp \n" 226 : "=b"(isp)
[ 4972.201901]
[ 4972.201902] other info that might help us debug this:
[ 4972.208669] 4 locks held by sh/702:
[ 4972.212265] #0: (cpu_add_remove_lock){--..}, at: [<c0347499>] mutex_lock+0x1c/0x1f
[ 4972.220304] #1: (sched_hotcpu_mutex){--..}, at: [<c0347499>] mutex_lock+0x1c/0x1f
[ 4972.228273] #2: (workqueue_mutex){--..}, at: [<c0347499>] mutex_lock+0x1c/0x1f
[ 4972.235821] #3: (slub_lock){----}, at: [<c01836d6>] slab_cpuup_callback+0x26/0x5bl *0xc03474990xc0347499 is in mutex_lock (/home/devel/linux-mm/kernel/mutex.c:92).
87 /*
88 * The locking fastpath is the 1->0 transition from 89 * 'unlocked' into 'locked' state. 90 */
91 __mutex_fastpath_lock(&lock->count, __mutex_lock_slowpath);
92 }
93
94 EXPORT_SYMBOL(mutex_lock);
95
96 static void fastcall noinline __sched
l *0xc01836d60xc01836d6 is in slab_cpuup_callback (/home/devel/linux-mm/mm/slub.c:2656).
2651 static void for_all_slabs(void (*func)(struct kmem_cache *, int), int cpu)
2652 {
2653 struct list_head *h;
2654
2655 down_read(&slub_lock);
2656 list_for_each(h, &slab_caches) {
2657 struct kmem_cache *s =
2658 container_of(h, struct kmem_cache, list);
2659
2660 func(s, cpu);
[ 4972.243670] [ 4972.243670] stack backtrace: [ 4972.248166] [<c0105281>] dump_trace+0x63/0x1eb [ 4972.252755] [<c0105423>] show_trace_log_lvl+0x1a/0x2f [ 4972.257969] [<c0106061>] show_trace+0x12/0x14 [ 4972.262463] [<c0106079>] dump_stack+0x16/0x18 [ 4972.266974] [<c0142ff8>] print_usage_bug+0x140/0x14a [ 4972.272109] [<c0143e1a>] mark_lock+0x29e/0x557 [ 4972.276708] [<c0144cda>] __lock_acquire+0x4f1/0xd36 [ 4972.281740] [<c01455bd>] lock_acquire+0x9e/0xb8 [ 4972.286416] [<c0348993>] _spin_lock+0x38/0x62 [ 4972.290936] [<c0181288>] add_partial+0xe/0x27 [ 4972.295458] [<c0181cd7>] deactivate_slab+0x67/0x179 [ 4972.300497] [<c0181e56>] flush_slab+0x6d/0x72 [ 4972.305018] [<c0181e8c>] __flush_cpu_slab+0x31/0x36 [ 4972.310049] [<c01836e8>] slab_cpuup_callback+0x38/0x5b [ 4972.315348] [<c01325d2>] notifier_call_chain+0x2b/0x4a [ 4972.320637] [<c013261e>] __raw_notifier_call_chain+0x19/0x1e [ 4972.326473] [<c013263d>] raw_notifier_call_chain+0x1a/0x1c [ 4972.332117] [<c014bb62>] _cpu_down+0x19c/0x25a [ 4972.336724] [<c014bc48>] cpu_down+0x28/0x3a [ 4972.341063] [<c027f800>] store_online+0x27/0x5a [ 4972.345757] [<c027c854>] sysdev_store+0x20/0x25 [ 4972.350443] [<c01c2739>] sysfs_write_file+0xc5/0xfd [ 4972.355482] [<c0187243>] vfs_write+0xd1/0x15a [ 4972.360004] [<c0187873>] sys_write+0x3d/0x72 [ 4972.364411] [<c01041e0>] syscall_call+0x7/0xb [ 4972.368924] [<b7ff0410>] 0xb7ff0410 [ 4972.372562] ======================= [ 4975.412963] lockdep: not fixing up alternatives.
Suspects:
add-suspend-related-notifications-for-cpu-hotplug-statistics.patch cpu-hotplug-fix-ksoftirqd-termination-on-cpu-hotplug-with-naughty-realtime-process.patch cpu-hotplug-fix-ksoftirqd-termination-on-cpu-hotplug-with-naughty-realtime-process-fix.patch
http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/2.6.22-rc3-mm1/console2.log
http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/2.6.22-rc3-mm1/mm-config
Regards,
Michal
Signature · 2 lines
"Najbardziej brakowało mi twojego milczenia." -- Andrzej Sapkowski "Coś więcej"
Michal Piotrowski napisał(a):
Quoted 13 lines
Andrew Morton napisał(a):
Quoted 2 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc3/2.6.22-rc3-mm1/
CPU hotplug test triggered this
[ 4972.038008] CPU 1 is now offline [ 4972.041411] lockdep: not fixing up alternatives. [ 4972.051553] [ 4972.051555] ================================= [ 4972.057562] [ INFO: inconsistent lock state ] [ 4972.062056] 2.6.22-rc3-mm1 #10 [ 4972.065184] ---------------------------------
[..]
Quoted 5 lines
[ 4972.372562] ======================= [ 4975.412963] lockdep: not fixing up alternatives.Suspects:
add-suspend-related-notifications-for-cpu-hotplug-statistics.patch
not guilty
Quoted 1 line
cpu-hotplug-fix-ksoftirqd-termination-on-cpu-hotplug-with-naughty-realtime-process.patch
not guilty
Quoted 1 line
cpu-hotplug-fix-ksoftirqd-termination-on-cpu-hotplug-with-naughty-realtime-process-fix.patch
not guilty
Regards,
Michal
Signature · 2 lines
"Najbardziej brakowało mi twojego milczenia." -- Andrzej Sapkowski "Coś więcej"
Andrew Morton
maintainerQuoted 40 lines · On Thu, 31 May 2007 19:53:07 +0200 Michal Piotrowski…
Andrew Morton
napisa__(a):Quoted 2 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc3/2.6.22-rc3-mm1/
CPU hotplug test triggered this
[ 4972.038008] CPU 1 is now offline [ 4972.041411] lockdep: not fixing up alternatives. [ 4972.051553] [ 4972.051555] ================================= [ 4972.057562] [ INFO: inconsistent lock state ] [ 4972.062056] 2.6.22-rc3-mm1 #10 [ 4972.065184] --------------------------------- [ 4972.069663] inconsistent {in-hardirq-W} -> {hardirq-on-W} usage. [ 4972.075758] sh/702 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 4972.080554] (&n->list_lock){++..}, at: [<c0181288>] add_partial+0xe/0x27l *0xc0181288
0xc0181288is inadd_partial(/home/devel/linux-mm/mm/slub.c:1193).
1188 }
1189
1190 static voidadd_partial(struct kmem_cache_node *n, struct page *page)
1191 {1192 spin_lock(&n->list_lock); 1193 n->nr_partial++; 1194 list_add(&page->lru, &n->partial); 1195 spin_unlock(&n->list_lock);1196 }
1197[ 4972.087650] {in-hardirq-W} state was registered at: [ 4972.092656] [<c0143bfe>] mark_lock+0x82/0x557 [ 4972.097323] [<c0144c5f>] __lock_acquire+0x476/0xd36 [ 4972.102562] [<c01455bd>] lock_acquire+0x9e/0xb8 [ 4972.107342] [<c0348993>] _spin_lock+0x38/0x62 [ 4972.111993] [<c0181d29>] deactivate_slab+0xb9/0x179 [ 4972.117300] [<c0181e56>] flush_slab+0x6d/0x72 [ 4972.122063] [<c0181e8c>] __flush_cpu_slab+0x31/0x36 [ 4972.127335] [<c0181ea5>] flush_cpu_slab+0x14/0x17
Quoted 8 lines
[ 4972.132401] [<c0113d6f>] smp_call_function_interrupt+0x3a/0x56 [ 4972.138607] [<c0104c73>] call_function_interrupt+0x33/0x38 [ 4972.144503] [<c0102b59>] default_idle+0x50/0x69 [ 4972.149421] [<c01023eb>] cpu_idle+0xb3/0xf8 [ 4972.153889] [<c03454fa>] rest_init+0x56/0x58 [ 4972.158402] [<c04f39c7>] start_kernel+0x351/0x359 [ 4972.163450] [<ffffffff>] 0xffffffff [ 4972.167221] irq event stamp: 2451
Yep, that's a bug in slub. We take that lock in the IPI handler. If a CPU is currently holding that lock and then takes the IPI and enters add_partial(), it'll deadlock.
Quoted 22 lines
[ 4972.243670] [ 4972.243670] stack backtrace: [ 4972.248166] [<c0105281>] dump_trace+0x63/0x1eb [ 4972.252755] [<c0105423>] show_trace_log_lvl+0x1a/0x2f [ 4972.257969] [<c0106061>] show_trace+0x12/0x14 [ 4972.262463] [<c0106079>] dump_stack+0x16/0x18 [ 4972.266974] [<c0142ff8>] print_usage_bug+0x140/0x14a [ 4972.272109] [<c0143e1a>] mark_lock+0x29e/0x557 [ 4972.276708] [<c0144cda>] __lock_acquire+0x4f1/0xd36 [ 4972.281740] [<c01455bd>] lock_acquire+0x9e/0xb8 [ 4972.286416] [<c0348993>] _spin_lock+0x38/0x62 [ 4972.290936] [<c0181288>] add_partial+0xe/0x27 [ 4972.295458] [<c0181cd7>] deactivate_slab+0x67/0x179 [ 4972.300497] [<c0181e56>] flush_slab+0x6d/0x72 [ 4972.305018] [<c0181e8c>] __flush_cpu_slab+0x31/0x36 [ 4972.310049] [<c01836e8>] slab_cpuup_callback+0x38/0x5b [ 4972.315348] [<c01325d2>] notifier_call_chain+0x2b/0x4a [ 4972.320637] [<c013261e>] __raw_notifier_call_chain+0x19/0x1e [ 4972.326473] [<c013263d>] raw_notifier_call_chain+0x1a/0x1c [ 4972.332117] [<c014bb62>] _cpu_down+0x19c/0x25a [ 4972.336724] [<c014bc48>] cpu_down+0x28/0x3a [ 4972.341063] [<c027f800>] store_online+0x27/0x5a
Quoted 8 lines
[ 4972.345757] [<c027c854>] sysdev_store+0x20/0x25 [ 4972.350443] [<c01c2739>] sysfs_write_file+0xc5/0xfd [ 4972.355482] [<c0187243>] vfs_write+0xd1/0x15a [ 4972.360004] [<c0187873>] sys_write+0x3d/0x72 [ 4972.364411] [<c01041e0>] syscall_call+0x7/0xb [ 4972.368924] [<b7ff0410>] 0xb7ff0410 [ 4972.372562] ======================= [ 4975.412963] lockdep: not fixing up alternatives.
Perhaps a suitable fix would be local_irq_disable() in flush_slab().
Quoted 4 lines · Andrew Morton
Quoted 4 lines
l *0xc0181288
0xc0181288is inadd_partial(/home/devel/linux-mm/mm/slub.c:1193).
1188 }
1189
Quoted 8 lines
Quoted 8 lines
1190 static void
add_partial(struct kmem_cache_node *n, struct page *page)
1191 {1192 spin_lock(&n->list_lock); 1193 n->nr_partial++; 1194 list_add(&page->lru, &n->partial); 1195 spin_unlock(&n->list_lock);1196 }
1197
add_partial runs with interrupts disabled. The interrupts are disabled when we enter SLUB via allocator or free functions.
Quoted 18 lines
Quoted 9 lines
[ 4972.087650] {in-hardirq-W} state was registered at: [ 4972.092656] [<c0143bfe>] mark_lock+0x82/0x557 [ 4972.097323] [<c0144c5f>] __lock_acquire+0x476/0xd36 [ 4972.102562] [<c01455bd>] lock_acquire+0x9e/0xb8 [ 4972.107342] [<c0348993>] _spin_lock+0x38/0x62 [ 4972.111993] [<c0181d29>] deactivate_slab+0xb9/0x179 [ 4972.117300] [<c0181e56>] flush_slab+0x6d/0x72 [ 4972.122063] [<c0181e8c>] __flush_cpu_slab+0x31/0x36 [ 4972.127335] [<c0181ea5>] flush_cpu_slab+0x14/0x17Quoted 8 lines
[ 4972.132401] [<c0113d6f>] smp_call_function_interrupt+0x3a/0x56 [ 4972.138607] [<c0104c73>] call_function_interrupt+0x33/0x38 [ 4972.144503] [<c0102b59>] default_idle+0x50/0x69 [ 4972.149421] [<c01023eb>] cpu_idle+0xb3/0xf8 [ 4972.153889] [<c03454fa>] rest_init+0x56/0x58 [ 4972.158402] [<c04f39c7>] start_kernel+0x351/0x359 [ 4972.163450] [<ffffffff>] 0xffffffff [ 4972.167221] irq event stamp: 2451
Quoted 3 lines
Yep, that's a bug in slub. We take that lock in the IPI handler. If a CPU is currently holding that lock and then takes the IPI and enters
add_partial(), it'll deadlock.
A cpu cannot enter an IPI handler while interrupts are disabled. That needs to be always the case when the list_lock is held.
Quoted 1 line
Perhaps a suitable fix would be
local_irq_disable()inflush_slab().
As far as I can tell: Interrupts are always disabled when flush_slab is run.
Sometimes we use spin_lock_irqsave for the list_lock and at other times spin_lock if interrupts are already disabled. Is that the problem?
Andrew Morton
maintainerQuoted 7 lines · On Thu, 31 May 2007 11:41:22 -0700 (PDT) Christoph Lameter <[email protected]>…
Quoted 1 line
Perhaps a suitable fix would be
local_irq_disable()inflush_slab().As far as I can tell: Interrupts are always disabled when
flush_slabis run.Sometimes we use
spin_lock_irqsavefor thelist_lockand at other timesspin_lockif interrupts are already disabled. Is that the problem?
Nope, the problem is in the part of my email which you deleted ;)
[ 4972.243670] [ 4972.243670] stack backtrace: [ 4972.248166] [<c0105281>] dump_trace+0x63/0x1eb [ 4972.252755] [<c0105423>] show_trace_log_lvl+0x1a/0x2f [ 4972.257969] [<c0106061>] show_trace+0x12/0x14 [ 4972.262463] [<c0106079>] dump_stack+0x16/0x18 [ 4972.266974] [<c0142ff8>] print_usage_bug+0x140/0x14a [ 4972.272109] [<c0143e1a>] mark_lock+0x29e/0x557 [ 4972.276708] [<c0144cda>] __lock_acquire+0x4f1/0xd36 [ 4972.281740] [<c01455bd>] lock_acquire+0x9e/0xb8 [ 4972.286416] [<c0348993>] _spin_lock+0x38/0x62 [ 4972.290936] [<c0181288>] add_partial+0xe/0x27 [ 4972.295458] [<c0181cd7>] deactivate_slab+0x67/0x179 [ 4972.300497] [<c0181e56>] flush_slab+0x6d/0x72 [ 4972.305018] [<c0181e8c>] __flush_cpu_slab+0x31/0x36 [ 4972.310049] [<c01836e8>] slab_cpuup_callback+0x38/0x5b [ 4972.315348] [<c01325d2>] notifier_call_chain+0x2b/0x4a [ 4972.320637] [<c013261e>] __raw_notifier_call_chain+0x19/0x1e [ 4972.326473] [<c013263d>] raw_notifier_call_chain+0x1a/0x1c [ 4972.332117] [<c014bb62>] _cpu_down+0x19c/0x25a [ 4972.336724] [<c014bc48>] cpu_down+0x28/0x3a [ 4972.341063] [<c027f800>] store_online+0x27/0x5a [ 4972.345757] [<c027c854>] sysdev_store+0x20/0x25 [ 4972.350443] [<c01c2739>] sysfs_write_file+0xc5/0xfd [ 4972.355482] [<c0187243>] vfs_write+0xd1/0x15a [ 4972.360004] [<c0187873>] sys_write+0x3d/0x72 [ 4972.364411] [<c01041e0>] syscall_call+0x7/0xb [ 4972.368924] [<b7ff0410>] 0xb7ff0410 [ 4972.372562] ======================= [ 4975.412963] lockdep: not fixing up alternatives.
we're not disbling local irqs on the cpu hotplug path.
Could do local_irq_disable() in slab_cpuup_callback(), I guess.
Quoted 3 lines · Andrew Morton
we're not disbling local irqs on the cpu hotplug path.
Could do
local_irq_disable()inslab_cpuup_callback(), I guess.
Ahh I see.
SLUB: Fix locking for hotplug callbacks.
Hotplug callbacks seem to be performed with interrupts enabled. Slub requires interrupts to be disabled for flushing caches.
mm/slub.c +14 -1
@@ -2663,6 +2663,19 @@ static void for_all_slabs(void (*func)(s }/* +* Version of __flush_cpu_slab for the case that interrupts +* are enabled. +*/ +static void cpu_slab_flush (struct kmem_cache *s,int cpu) +{ +unsigned long flags; + +local_irq_save (flags); +__flush_cpu_slab (s, cpu); +local_irq_restore (flags); +} + +/* * Use the cpu notifier to insure that the cpu slabs are flushed when * necessary. */
@@ -2676,7 +2689,7 @@ static int __cpuinit slab_cpuup_callbackcase CPU_UP_CANCELED_FROZEN :case CPU_DEAD :case CPU_DEAD_FROZEN : -for_all_slabs (__flush_cpu_slab, cpu); +for_all_slabs (cpu_slab_flush, cpu);break ;default :break ;
Hello
This is from iMac G3. The spufs_mem_mmap_fault() code looks bad
in arch/powerpc/platforms/cell/spufs/file.c but somehow I'm unable to find the patch to blame hmm.
arch/powerpc/platforms/cell/spufs/file.c: In function 'spufs_mem_mmap_fault':arch/powerpc/platforms/cell/spufs/file.c:122: error: 'address' undeclared (first use in this function) arch/powerpc/platforms/cell/spufs/file.c:122: error: (Each undeclared identifier is reported only once arch/powerpc/platforms/cell/spufs/file.c:122: error: for each function it appears in.) arch/powerpc/platforms/cell/spufs/file.c:141: error: expected ';' before 'if' arch/powerpc/platforms/cell/spufs/file.c:122: warning: unused variable 'addr0' make[3]: *** [arch/powerpc/platforms/cell/spufs/file.o] Blad 1
make[2]: *** [arch/powerpc/platforms/cell/spufs] Blad 2
make[1]: *** [arch/powerpc/platforms/cell] Blad 2
Regards,
Mariusz
Andrew Morton
maintainerQuoted 6 lines · On Thu, 31 May 2007 22:43:18 +0200 Mariusz Kozlowski <[email protected]>…
Hello
This is from iMac G3. The
spufs_mem_mmap_fault()code looks bad
inarch/powerpc/platforms/cell/spufs/file.cbut somehow I'm unable to find the patch to blame hmm.
Quoted 10 lines
arch/powerpc/platforms/cell/spufs/file.c: In function 'spufs_mem_mmap_fault':arch/powerpc/platforms/cell/spufs/file.c:122: error: 'address' undeclared (first use in this function)arch/powerpc/platforms/cell/spufs/file.c:122: error: (Each undeclared identifier is reported only oncearch/powerpc/platforms/cell/spufs/file.c:122: error: for each function it appears in.)arch/powerpc/platforms/cell/spufs/file.c:141: error: expected ';' before 'if'arch/powerpc/platforms/cell/spufs/file.c:122: warning: unused variable 'addr0' make[3]: *** [arch/powerpc/platforms/cell/spufs/file.o] Blad 1
make[2]: *** [arch/powerpc/platforms/cell/spufs] Blad 2
make[1]: *** [arch/powerpc/platforms/cell] Blad 2
Yeah, that's the fix-fault-vs-invalidate-race patches, or my poor attempt to fix them when spufs changed. I suppose I'll have a poke at it next time I get the powerpc machine fired up.
Quoted 15 lines
Quoted 4 lines
This is from iMac G3. The
spufs_mem_mmap_fault()code looks bad
inarch/powerpc/platforms/cell/spufs/file.cbut somehow I'm unable to find the patch to blame hmm.Quoted 10 lines
arch/powerpc/platforms/cell/spufs/file.c: In function 'spufs_mem_mmap_fault':arch/powerpc/platforms/cell/spufs/file.c:122: error: 'address' undeclared (first use in this function)arch/powerpc/platforms/cell/spufs/file.c:122: error: (Each undeclared identifier is reported only oncearch/powerpc/platforms/cell/spufs/file.c:122: error: for each function it appears in.)arch/powerpc/platforms/cell/spufs/file.c:141: error: expected ';' before 'if'arch/powerpc/platforms/cell/spufs/file.c:122: warning: unused variable 'addr0' make[3]: *** [arch/powerpc/platforms/cell/spufs/file.o] Blad 1
make[2]: *** [arch/powerpc/platforms/cell/spufs] Blad 2
make[1]: *** [arch/powerpc/platforms/cell] Blad 2
Quoted 3 lines
Yeah, that's the fix-fault-vs-invalidate-race patches, or my poor attempt to fix them when spufs changed. I suppose I'll have a poke at it next time I get the powerpc machine fired up.
I #if 0'ed that piece of code inside spufs_mem_mmap_fault() and run make again. This is 'make allmodconfig && make' result:
ERROR: ".ps3av_set_hdr" [drivers/ps3/ps3av_cmd.ko] undefined!
ERROR: ".ps3av_do_pkt" [drivers/ps3/ps3av_cmd.ko] undefined!
ERROR: ".ps3_vuart_write" [drivers/ps3/ps3av_cmd.ko] undefined!
ERROR: ".ps3_vuart_read" [drivers/ps3/ps3av_cmd.ko] undefined!
ERROR: ".ps3av_cmd_fin" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_av_video_disable_sig" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_set_video_mode" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_video_get_monitor_info" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_audio_active" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_set_audio_mode" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_set_av_audio_param" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_vuart_read" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_av_get_hw_conf" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_av_video_mute" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_av_tv_mute" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_audio_mode" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_av_hdmi_mode" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_set_av_video_cs" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_vuart_write" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_audio_mute" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_avb_param" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_init" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_av_audio_mute" [drivers/ps3/ps3av.ko] undefined!
ERROR: "pmu_batteries" [drivers/power/pmu_battery.ko] undefined!
ERROR: "pmu_battery_count" [drivers/power/pmu_battery.ko] undefined!
ERROR: "pmu_power_flags" [drivers/power/pmu_battery.ko] undefined!
ERROR: "irq_map" [drivers/net/pasemi_mac.ko] undefined!
ERROR: "pmu_batteries" [drivers/macintosh/apm_emu.ko] undefined!
ERROR: "pmu_battery_count" [drivers/macintosh/apm_emu.ko] undefined!
ERROR: "pmu_power_flags" [drivers/macintosh/apm_emu.ko] undefined!
ERROR: ".cpufreq_set_policy" [arch/powerpc/platforms/cell/cbe_cpufreq.ko] undefined! make[1]: *** [__modpost] Blad 1
make: *** [modules] Blad 2
Regards,
Mariusz
Andrew Morton
maintainerQuoted 47 lines · On Fri, 1 Jun 2007 22:50:58 +0200 Mariusz Kozlowski <[email protected]>…
Quoted 15 lines
Quoted 4 lines
This is from iMac G3. The
spufs_mem_mmap_fault()code looks bad
inarch/powerpc/platforms/cell/spufs/file.cbut somehow I'm unable to find the patch to blame hmm.Quoted 10 lines
arch/powerpc/platforms/cell/spufs/file.c: In function 'spufs_mem_mmap_fault':arch/powerpc/platforms/cell/spufs/file.c:122: error: 'address' undeclared (first use in this function)arch/powerpc/platforms/cell/spufs/file.c:122: error: (Each undeclared identifier is reported only oncearch/powerpc/platforms/cell/spufs/file.c:122: error: for each function it appears in.)arch/powerpc/platforms/cell/spufs/file.c:141: error: expected ';' before 'if'arch/powerpc/platforms/cell/spufs/file.c:122: warning: unused variable 'addr0' make[3]: *** [arch/powerpc/platforms/cell/spufs/file.o] Blad 1
make[2]: *** [arch/powerpc/platforms/cell/spufs] Blad 2
make[1]: *** [arch/powerpc/platforms/cell] Blad 2Quoted 3 lines
Yeah, that's the fix-fault-vs-invalidate-race patches, or my poor attempt to fix them when spufs changed. I suppose I'll have a poke at it next time I get the powerpc machine fired up.
I #if 0'ed that piece of code inside
spufs_mem_mmap_fault()and run make again. This is 'make allmodconfig && make' result:ERROR: ".ps3av_set_hdr" [
drivers/ps3/ps3av_cmd.ko] undefined!
ERROR: ".ps3av_do_pkt" [drivers/ps3/ps3av_cmd.ko] undefined!
ERROR: ".ps3_vuart_write" [drivers/ps3/ps3av_cmd.ko] undefined!
ERROR: ".ps3_vuart_read" [drivers/ps3/ps3av_cmd.ko] undefined!
ERROR: ".ps3av_cmd_fin" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_av_video_disable_sig" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_set_video_mode" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_video_get_monitor_info" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_audio_active" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_set_audio_mode" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_set_av_audio_param" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_vuart_read" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_av_get_hw_conf" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_av_video_mute" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_av_tv_mute" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_audio_mode" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_av_hdmi_mode" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_set_av_video_cs" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_vuart_write" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_audio_mute" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_avb_param" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_init" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_av_audio_mute" [drivers/ps3/ps3av.ko] undefined!
ERROR: "pmu_batteries" [drivers/power/pmu_battery.ko] undefined!
ERROR: "pmu_battery_count" [drivers/power/pmu_battery.ko] undefined!
Quoted 9 lines
ERROR: "
pmu_power_flags" [drivers/power/pmu_battery.ko] undefined!
ERROR: "irq_map" [drivers/net/pasemi_mac.ko] undefined!
ERROR: "pmu_batteries" [drivers/macintosh/apm_emu.ko] undefined!
ERROR: "pmu_battery_count" [drivers/macintosh/apm_emu.ko] undefined!
ERROR: "pmu_power_flags" [drivers/macintosh/apm_emu.ko] undefined!
ERROR: ".cpufreq_set_policy" [arch/powerpc/platforms/cell/cbe_cpufreq.ko] undefined! make[1]: *** [__modpost] Blad 1
make: *** [modules] Blad 2
Yeah, allmodconfig tends to fall over in a heap on a lot of the less-lavishly-maintained architectures. If any of these are specific to -mm then I guess we should fix them up, prevent the kernel from actually going backwards.
Quoted 57 lines
Quoted 47 lines
Quoted 15 lines
Quoted 4 lines
This is from iMac G3. The
spufs_mem_mmap_fault()code looks bad
inarch/powerpc/platforms/cell/spufs/file.cbut somehow I'm unable to find the patch to blame hmm.Quoted 10 lines
arch/powerpc/platforms/cell/spufs/file.c: In function 'spufs_mem_mmap_fault':arch/powerpc/platforms/cell/spufs/file.c:122: error: 'address' undeclared (first use in this function)arch/powerpc/platforms/cell/spufs/file.c:122: error: (Each undeclared identifier is reported only oncearch/powerpc/platforms/cell/spufs/file.c:122: error: for each function it appears in.)arch/powerpc/platforms/cell/spufs/file.c:141: error: expected ';' before 'if'arch/powerpc/platforms/cell/spufs/file.c:122: warning: unused variable 'addr0' make[3]: *** [arch/powerpc/platforms/cell/spufs/file.o] Blad 1
make[2]: *** [arch/powerpc/platforms/cell/spufs] Blad 2
make[1]: *** [arch/powerpc/platforms/cell] Blad 2Quoted 3 lines
Yeah, that's the fix-fault-vs-invalidate-race patches, or my poor attempt to fix them when spufs changed. I suppose I'll have a poke at it next time I get the powerpc machine fired up.
I #if 0'ed that piece of code inside
spufs_mem_mmap_fault()and run make again. This is 'make allmodconfig && make' result:ERROR: ".ps3av_set_hdr" [
drivers/ps3/ps3av_cmd.ko] undefined!
ERROR: ".ps3av_do_pkt" [drivers/ps3/ps3av_cmd.ko] undefined!
ERROR: ".ps3_vuart_write" [drivers/ps3/ps3av_cmd.ko] undefined!
ERROR: ".ps3_vuart_read" [drivers/ps3/ps3av_cmd.ko] undefined!
ERROR: ".ps3av_cmd_fin" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_av_video_disable_sig" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_set_video_mode" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_video_get_monitor_info" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_audio_active" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_set_audio_mode" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_set_av_audio_param" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_vuart_read" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_av_get_hw_conf" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_av_video_mute" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_av_tv_mute" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_audio_mode" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_av_hdmi_mode" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_set_av_video_cs" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_vuart_write" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_audio_mute" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_avb_param" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_init" [drivers/ps3/ps3av.ko] undefined!
ERROR: ".ps3av_cmd_av_audio_mute" [drivers/ps3/ps3av.ko] undefined!
ERROR: "pmu_batteries" [drivers/power/pmu_battery.ko] undefined!
ERROR: "pmu_battery_count" [drivers/power/pmu_battery.ko] undefined!Quoted 9 lines
ERROR: "
pmu_power_flags" [drivers/power/pmu_battery.ko] undefined!
ERROR: "irq_map" [drivers/net/pasemi_mac.ko] undefined!
ERROR: "pmu_batteries" [drivers/macintosh/apm_emu.ko] undefined!
ERROR: "pmu_battery_count" [drivers/macintosh/apm_emu.ko] undefined!
ERROR: "pmu_power_flags" [drivers/macintosh/apm_emu.ko] undefined!
ERROR: ".cpufreq_set_policy" [arch/powerpc/platforms/cell/cbe_cpufreq.ko] undefined! make[1]: *** [__modpost] Blad 1
make: *** [modules] Blad 2
Quoted 4 lines
Yeah, allmodconfig tends to fall over in a heap on a lot of the less-lavishly-maintained architectures. If any of these are specific to -mm then I guess we should fix them up, prevent the kernel from actually going backwards.
I recall compiling earlier versions of -mm on this iMac just fine a few months ago. Now it looks like a bunch of new warnings appeared and if fails to compile for various reasons in different places. I'm thinking of running -mm in next few days so maybe something interesting will come up :-)
BTW. This is 'make allnoconfig && make' result:
MODPOST vmlinux
ln: accessing `arch/powerpc/boot/zImage': No such file or directory make[1]: *** [arch/powerpc/boot/zImage] Error 1
make: *** [zImage] Error 2
Quoted 6 lines · Mariusz Kozlowski
BTW. This is 'make allnoconfig && make' result:
MODPOST vmlinux
ln: accessing `arch/powerpc/boot/zImage': No such file or directory make[1]: *** [arch/powerpc/boot/zImage] Error 1
make: *** [zImage] Error 2
If you check your .config I think you'll find you have none of the powerpc platforms selected, which means you don't get a zImage. And your kernel won't boot on any actual hardware either :)
Perhaps one of the platforms should be the default if nothing else is selected, just so allnoconfig works.
cheers
Signature · 8 lines
Michael Ellerman OzLabs, IBM Australia Development Lab wwweb: http://michael.ellerman.id.au phone: +61 2 6212 1183 (tie line 70 21183) We do not inherit the earth from our ancestors, we borrow it from our children. - S.M.A.R.T Person
Quoted 9 lines
Quoted 6 lines
BTW. This is 'make allnoconfig && make' result:
MODPOST vmlinux
ln: accessing `arch/powerpc/boot/zImage': No such file or directory make[1]: *** [arch/powerpc/boot/zImage] Error 1
make: *** [zImage] Error 2If you check your .config I think you'll find you have none of the powerpc platforms selected, which means you don't get a zImage.
Which is simply a Makefile bug.
Quoted 2 lines
And your
kernel won't boot on any actual hardware either :)
I've never seen any allnoconfig kernel do that ;-)
Quoted 2 lines
Perhaps one of the platforms should be the default if nothing else is selected, just so allnoconfig works.
Nah, just don't create the zImage link if $(image-y) is empty.
Segher
Quoted 8 lines · Andrew Morton
Yeah, allmodconfig tends to fall over in a heap on a lot of the less-lavishly-maintained architectures. If any of these are specific to
-mm then I guess we should fix them up, prevent the kernel from actually
going backwards.
Some of the later seems to be related to the lack of CONFIG_PM .. it's not much a lavish maintainership issue than the fact that nobody every builds the powermac drivers without CONFIG_PM :-) I'll look into fixing some of these.
As for the ps3 bits, it's a known problem, the ps3 support is still very much a work in progress.
Cheers,
Ben.
Quoted 2 lines
Yeah, allmodconfig tends to fall over in a heap on a lot of the less-lavishly-maintained architectures.
To be fair, almost all of the powerpc allmodconfig build problems are caused by x86-only drivers (and most of those I doubt still work on x86, even).
Segher
Re: 2.6.22-rc3-mm1 - works-for-me and a meta-question...
In reply to Andrew MortonQuoted 1 line · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc3/2.6.22-rc3-mm1/
Builds, boots, seems to be behaving on my laptop (Dell D820, X86_64).
Meta-question: Is there a useful address/mailbox/webpage to toss *working* reports at?
Andrew Morton
maintainerRe: 2.6.22-rc3-mm1 - works-for-me and a meta-question...
Quoted 4 lines · On Thu, 31 May 2007 18:05:04 -0400 [email protected] wrote:
Quoted 1 line · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc3/2.6.22-rc3-mm1/
Builds, boots, seems to be behaving on my laptop (Dell D820,
X86_64).
cool, thanks.
Quoted 2 lines
Meta-question: Is there a useful address/mailbox/webpage to toss *working* reports at?
ooh, don't know. Nobody's ever had a -mm kernel which worked before ;)
A message that is not in the archive (sent off-list or not yet received): [email protected]
Re: 2.6.22-rc3-mm1 - works-for-me and a meta-question...
Hi,
Quoted 7 lines · Michal Piotrowski
Quoted 6 lines · On 01/06/07, [email protected] <[email protected]> wrote:
Quoted 1 line · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc3/2.6.22-rc3-mm1/
Builds, boots, seems to be behaving on my laptop (Dell D820,
X86_64).
Quoted 8 lines
Quoted 3 lines
Meta-question: Is there a useful address/mailbox/webpage to toss *working* reports at?
There was a klive
http://klive.cpushare.com/Actually it doesn't work. Andrea, what is happening with klive?
Don't worry, everything is going fine at klive.cpushare.com. You only clicked it at the wrong time ;). (by the time I read your message it was back up already) Uptime has generally been very good...
KLive current problem is that 512M of shm for the db, isn't enough to get good performance with the current data size anymore.
Re: 2.6.22-rc3-mm1 - page_mkwrite() breakage
In reply to Andrew MortonQuoted 1 line · Andrew Morton
git-ocfs2.patch
Andrew, thanks for getting that back in there.
mm-fix-fault-vs-invalidate-race-for-linear-mappings.patch broke ocfs2 shared writable mmap. We hang on a page lock because ->page_mkwrite() is being called with the page already locked:
+ /*
+ * For consistency in subsequent calls, make the nopage_page always
+ * locked.
+ */
+ if (unlikely(!(vma->vm_flags & VM_CAN_INVALIDATE)))
+ lock_page(nopage_page);
It wasn't previously being called with the page lock held, intentionally.
--Mark
--
Mark Fasheh
Senior Software Developer, Oracle
[email protected]
Re: 2.6.22-rc3-mm1 - page_mkwrite() breakage
Quoted 17 lines · Mark Fasheh
Quoted 1 line · Andrew Morton
git-ocfs2.patch
Andrew, thanks for getting that back in there.
mm-fix-fault-vs-invalidate-race-for-linear-mappings.patch broke ocfs2 shared writable mmap. We hang on a page lock because ->page_mkwrite() is being called with the page already locked:
(quoted diff) +6
-0+ /* + * For consistency in subsequent calls, make the nopage_page always + * locked. + */ + if (unlikely(!(vma->vm_flags & VM_CAN_INVALIDATE))) + lock_page(nopage_page);
Quoted 1 line
It wasn't previously being called with the page lock held, intentionally.
Ah, I didn't realise you were using that yet. I expect ocfs2 is using VM_CAN_INVALIDATE there anyway.
Hmm, this becomes easier to deal with after page_mkwrite is merged with ->fault. But for now, can we just lock the page at the do_wp_page site as well, and change the API? All users I have seen want the page locked there anyway...
Re: 2.6.22-rc3-mm1 - page_mkwrite() breakage
Quoted 7 lines · Nick Piggin
Ah, I didn't realise you were using that yet. I expect ocfs2 is using
VM_CAN_INVALIDATEthere anyway.Hmm, this becomes easier to deal with after
page_mkwriteis merged with ->fault. But for now, can we just lock the page at thedo_wp_pagesite as well, and change the API? All users I have seen want the page locked there anyway...
Unfortunately that doesn't work for ocfs2 for exactly the same reasons page lock doesn't work during a write either - there's a cluster lock inversion and we might have to zero adjacent pages for an allocating write.
What's involved in merging it with ->fault?
Here's a nasty idea... Would it be valid for ->page_mkwrite to unlock the page, so long as it's returned in a locked state? Though, do we even need the page lock that early? It seemed to me that you were adding it for consistency reasons (I could be wrong though).
--Mark
--
Mark Fasheh
Senior Software Developer, Oracle
[email protected]
Re: 2.6.22-rc3-mm1 - page_mkwrite() breakage
Quoted 4 lines · Mark Fasheh
Quoted 3 lines · Nick Piggin
Ah, I didn't realise you were using that yet. I expect ocfs2 is using
VM_CAN_INVALIDATEthere anyway.
Quoted 8 lines
Quoted 4 lines
Hmm, this becomes easier to deal with after
page_mkwriteis merged with ->fault. But for now, can we just lock the page at thedo_wp_pagesite as well, and change the API? All users I have seen want the page locked there anyway...Unfortunately that doesn't work for ocfs2 for exactly the same reasons page lock doesn't work during a write either - there's a cluster lock inversion and we might have to zero adjacent pages for an allocating write.
I guess you could just fail the page_mkwrite and have it try again? .. that would require changing it not to always go SIGBUS though.
Quoted 1 line
What's involved in merging it with ->fault?
Just I have't sent the patch (because at the time there were no page_mkwrite users to look at).
It is nicer too, because the nopage path only has to call into the filesystem once, to return the page (the filesystem can check whether it is for write, and do the page_mkwrite thing at that time). do_wp_page obviously still involves the extra call, and that will be with a flag telling the fs that it isn't a "nopage" fault, but a write fault on an existing page.
Quoted 4 lines
Here's a nasty idea... Would it be valid for ->page_mkwrite to unlock the page, so long as it's returned in a locked state? Though, do we even need the page lock that early? It seemed to me that you were adding it for consistency reasons (I could be wrong though).
You could do that, but you'd have to probably check that it is within i_size after you relock it, I think... yeah, that might be the best thing for ocfs to do for now.
Re: 2.6.22-rc3-mm1 - page_mkwrite() breakage
Quoted 8 lines · Nick Piggin
Quoted 4 lines
Here's a nasty idea... Would it be valid for ->page_mkwrite to unlock the page, so long as it's returned in a locked state? Though, do we even need the page lock that early? It seemed to me that you were adding it for consistency reasons (I could be wrong though).
You could do that, but you'd have to probably check that it is within
i_sizeafter you relock it, I think... yeah, that might be the best thing for ocfs to do for now.
Well, ocfs2 already does i_size checks in page_mkwrite, so we're covered with respect to truncate races.
I'm still not clear though - what was the reason for adding the page locking there in the 1st place?
--Mark
--
Mark Fasheh
Senior Software Developer, Oracle
[email protected]
Re: 2.6.22-rc3-mm1 - page_mkwrite() breakage
Quoted 10 lines · Mark Fasheh
Quoted 8 lines · Nick Piggin
Quoted 4 lines
Here's a nasty idea... Would it be valid for ->page_mkwrite to unlock the page, so long as it's returned in a locked state? Though, do we even need the page lock that early? It seemed to me that you were adding it for consistency reasons (I could be wrong though).
You could do that, but you'd have to probably check that it is within
i_sizeafter you relock it, I think... yeah, that might be the best thing for ocfs to do for now.
Quoted 5 lines
Well, ocfs2 already does
i_sizechecks inpage_mkwrite, so we're covered with respect to truncate races.I'm still not clear though - what was the reason for adding the page locking there in the 1st place?
Yeah, its to cover page invalidation races. There is a description in an earlier patch's changelog.
Re: 2.6.22-rc3-mm1 - page_mkwrite() breakage
Quoted 10 lines · Nick Piggin
Quoted 9 lines · Mark Fasheh
Quoted 8 lines · Nick Piggin
Quoted 4 lines
Here's a nasty idea... Would it be valid for ->page_mkwrite to unlock the page, so long as it's returned in a locked state? Though, do we even need the page lock that early? It seemed to me that you were adding it for consistency reasons (I could be wrong though).
You could do that, but you'd have to probably check that it is within
i_sizeafter you relock it, I think... yeah, that might be the best thing for ocfs to do for now.
Ok. So how about the attached patch? It's a bit different than discussed, but I think it's much cleaner because it preserves the current behavior of the callback and keeps that bit of page locking inside core code. Not tested as of yet, but I can run it tommorrow.
--Mark
--
Mark Fasheh
Senior Software Developer, Oracle
[email protected]
From: Mark Fasheh <[email protected]>
[PATCH] Release page lock before calling ->page_mkwrite
__do_fault() was calling ->page_mkwrite() with the page lock held, which violates the locking rules for that callback. Release and retake the page lock around the callback to avoid deadlocking file systems which manually take it.
--- mm/memory.c | 14 +++++++++----- 1 files changed, 9 insertions(+), 5 deletions(-)
mm/memory.c +9 -5
@@ -2378,11 +2378,14 @@ static int __do_fault(struct mm_struct ** address space wants to know that the page is about * to become writable */ -if (vma->vm_ops->page_mkwrite && - vma->vm_ops->page_mkwrite (vma, page) <0 ) { - fdata.type =VM_FAULT_SIGBUS ; - anon =1 ;/* no anon but release faulted_page */ - goto out; +if (vma->vm_ops->page_mkwrite) { +unlock_page (page); +if (vma->vm_ops->page_mkwrite (vma, page) <0 ) { + fdata.type =VM_FAULT_SIGBUS ; + anon =1 ;/* no anon but release faulted_page */ + goto out_unlocked; + } +lock_page (page); } }
@@ -2434,6 +2437,7 @@ static int __do_fault(struct mm_struct * out:unlock_page (faulted_page); +out_unlocked:if (anon)page_cache_release (faulted_page);else if (dirty_page) {
Signature · 1 line
1.4.2.3
Re: 2.6.22-rc3-mm1 - page_mkwrite() breakage
Quoted 4 lines · Mark Fasheh
Ok. So how about the attached patch? It's a bit different than discussed, but I think it's much cleaner because it preserves the current behavior of the callback and keeps that bit of page locking inside core code. Not tested as of yet, but I can run it tommorrow.
Ok - this patch seems to check out fine in testing - no more deadlocking.
Andrew, if this is ok with you I'd really like to see that fix in -mm. Ocfs2 shared write mmap will instantly deadlock without it.
Quoted 1 line
From reading Nick's description of the problem in
mm-fix-fault-vs-invalidate-race-for-linear-mappings.patch I think we're pretty safe (as I noted before) because Ocfs2 re-checks the mapping under lock to protect against trucate races. That's been an "unwritten" requirement of page_mkwrite() anyway.
Speaking of requirements, attached is my sad attempt at documenting the API. I know it might be merged into ->fault at some point, but we really ought to have _something_ in the meantime.
--Mark
--
Mark Fasheh
Senior Software Developer, Oracle
[email protected]
From: Mark Fasheh <[email protected]>
[PATCH] Document ->page_mkwrite() locking
There seems to be very little documentation about this callback in general. The locking in particular is a bit tricky, so it's worth having this in writing.
---
Documentation/filesystems/Locking | 11 ++++++++++- 1 files changed, 10 insertions(+), 1 deletions(-)
2320eadfa34199c779638edbdbb6c491df09c49b
Documentation/filesystems/Locking +10 -1
@@ -512,13 +512,22 @@ prototypes: void (*close)(struct vm_area_struct*); struct page *(*fault)(struct vm_area_struct*, struct fault_data *); struct page *(*nopage)(struct vm_area_struct*, unsigned long, int *); + int (*page_mkwrite)(struct vm_area_struct *, struct page *); locking rules: - BKL mmap_sem + BKL mmap_sem PageLocked(page) open: no yes close: no yes fault: no yes nopage: no yes +page_mkwrite: no yes no + + ->page_mkwrite() is called when a previously read-only page is +about to become writeable. The file system is responsible for +protecting against truncate races. Once appropriate action has been +taking to lock out truncate, the page range should be verified to be +within i_size. The page mapping should also be checked that it is not +NULL. ================================================================================ Dubious stuff
Signature · 1 line
1.3.3
Andrew Morton
maintainerRe: 2.6.22-rc3-mm1 - page_mkwrite() breakage
Quoted 10 lines · On Fri, 1 Jun 2007 15:01:18 -0700 Mark Fasheh <[email protected]> wrote:
Quoted 4 lines · Mark Fasheh
Ok. So how about the attached patch? It's a bit different than discussed, but I think it's much cleaner because it preserves the current behavior of the callback and keeps that bit of page locking inside core code. Not tested as of yet, but I can run it tommorrow.
Ok - this patch seems to check out fine in testing - no more deadlocking.
Andrew, if this is ok with you I'd really like to see that fix in -mm. Ocfs2 shared write mmap will instantly deadlock without it.
ug, OK. I get a ginormous reject when merging ocfs2 on Nick's stuff which I've been largely ignoring thus far.
Perhaps I need to go back to staging Nick's stuff after the git trees. I'll take a look.
Re: 2.6.22-rc3-mm1 - page_mkwrite() breakage
Quoted 5 lines · Andrew Morton
Quoted 2 lines
Andrew, if this is ok with you I'd really like to see that fix in -mm. Ocfs2 shared write mmap will instantly deadlock without it.
ug, OK. I get a ginormous reject when merging ocfs2 on Nick's stuff which I've been largely ignoring thus far.
Huh, I'm a bit confused... I created this patch on top of 2.6.22-rc3-mm1 which most certainly contains a merge of git-ocfs2.patch and the series which at least contains mm-fix-fault-vs-invalidate-race-for-linear-mappings.patch.
So, which of Nick's patches are we talking about here?
Btw, I know you tend to handle rejects yourself, but if it's a major PITA I'd be happy to help out. Boy, I'm hoping I didn't just ask for a load of trouble there :)
--Mark
--
Mark Fasheh
Senior Software Developer, Oracle
[email protected]
Andrew Morton
maintainerRe: 2.6.22-rc3-mm1 - page_mkwrite() breakage
Quoted 11 lines · On Fri, 1 Jun 2007 15:33:02 -0700 Mark Fasheh <[email protected]> wrote:
Quoted 5 lines · Andrew Morton
Quoted 2 lines
Andrew, if this is ok with you I'd really like to see that fix in -mm. Ocfs2 shared write mmap will instantly deadlock without it.
ug, OK. I get a ginormous reject when merging ocfs2 on Nick's stuff which I've been largely ignoring thus far.
Huh, I'm a bit confused... I created this patch on top of 2.6.22-rc3-mm1 which most certainly contains a merge of git-ocfs2.patch and the series which at least contains mm-fix-fault-vs-invalidate-race-for-linear-mappings.patch.
Right. I did a lot of tricksy work for rc3-mm1 to merge git-ocfs2 on top of Nick's stuff. Then I repulled your tree and lost it all. This is because I was dumb and I fixed rc3-mm1's git-ocfs.patch rather than doing a separate fix-rejects-in-git-ocfs2.patch.
This is all unique-to-akpm stuff which you don't need to worry about ;)
Quoted 5 lines
So, which of Nick's patches are we talking about here?
Btw, I know you tend to handle rejects yourself, but if it's a major PITA I'd be happy to help out. Boy, I'm hoping I didn't just ask for a load of trouble there :)
Is OK - I'll move Nick's patches back to behind the git trees and it'll all come good.
Re: 2.6.22-rc3-mm1 - page_mkwrite() breakage
Quoted 6 lines · Andrew Morton
Right. I did a lot of tricksy work for rc3-mm1 to merge git-ocfs2 on top of Nick's stuff. Then I repulled your tree and lost it all. This is because I was dumb and I fixed rc3-mm1's git-ocfs.patch rather than doing a separate fix-rejects-in-git-ocfs2.patch.
This is all unique-to-akpm stuff which you don't need to worry about ;)
Ok, I am no longer concerned! :)
Quoted 8 lines
Quoted 5 lines
So, which of Nick's patches are we talking about here?
Btw, I know you tend to handle rejects yourself, but if it's a major PITA I'd be happy to help out. Boy, I'm hoping I didn't just ask for a load of trouble there :)
Is OK - I'll move Nick's patches back to behind the git trees and it'll all come good.
Phew ok. Once again, thanks for all the work you do getting the ocfs2 git patches into -mm.
--Mark
--
Mark Fasheh
Senior Software Developer, Oracle
[email protected]
Quoted 8 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc3/2.6.22-rc3-mm1/
- Merged the convert-cpusets-to-container-infrastructure patches. These will probably be dropped and redone.
<BIG SNIP>
Review
Quoted 12 lines
x86 things
(quoted diff) +9
-0+add-select-phylib-to-the-ucc_geth-kconfig-option.patch +m68k-parenthesis-balance.patch +msi-fix-the-ordering-of-msix-irqs.patch +msi-mask-the-msix-vector-before-we-unmap-it.patch +potential-parse-error-in-ifdef.patch +potential-parse-error-in-ifdef-fix.patch +potential-parse-error-in-ifdef-update.patch +pci_ids-update-patch-for-intel-ich9m.patch +x86-fix-oprofile-double-free-was-re-multiple-free.patch
http://lkml.org/lkml/2007/5/30/565 fixes the above patch :-)
<BIG SNIP>
- Arnaldo
Andrew Morton
maintainerQuoted 12 lines · On Thu, 31 May 2007 23:01:15 -0300 Arnaldo Carvalho de Melo <[email protected]>…
Quoted 8 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc3/2.6.22-rc3-mm1/
- Merged the convert-cpusets-to-container-infrastructure patches. These will probably be dropped and redone.
<BIG SNIP>
Quoted 2 lines
x86 things
Quoted 12 lines
Review
Quoted 10 lines
(quoted diff) +9
-0+add-select-phylib-to-the-ucc_geth-kconfig-option.patch +m68k-parenthesis-balance.patch +msi-fix-the-ordering-of-msix-irqs.patch +msi-mask-the-msix-vector-before-we-unmap-it.patch +potential-parse-error-in-ifdef.patch +potential-parse-error-in-ifdef-fix.patch +potential-parse-error-in-ifdef-update.patch +pci_ids-update-patch-for-intel-ich9m.patch +x86-fix-oprofile-double-free-was-re-multiple-free.patchhttp://lkml.org/lkml/2007/5/30/565 fixes the above patch :-)
I don't know what you mean. The code is already using for_each_possible_cpu() and x86-fix-oprofile-double-free-was-re-multiple-free.patch doesn't change that.
Quoted 33 lines · Andrew Morton
Quoted 15 lines · On Thu, 31 May 2007 23:01:15 -0300 Arnaldo Carvalho de Melo <[email protected]>…
Quoted 9 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc3/2.6.22-rc3-mm1/
- Merged the convert-cpusets-to-container-infrastructure patches. These will probably be dropped and redone.
<BIG SNIP>
Quoted 2 lines
x86 things
Quoted 14 lines
Review
Quoted 11 lines
(quoted diff) +9
-0+add-select-phylib-to-the-ucc_geth-kconfig-option.patch +m68k-parenthesis-balance.patch +msi-fix-the-ordering-of-msix-irqs.patch +msi-mask-the-msix-vector-before-we-unmap-it.patch +potential-parse-error-in-ifdef.patch +potential-parse-error-in-ifdef-fix.patch +potential-parse-error-in-ifdef-update.patch +pci_ids-update-patch-for-intel-ich9m.patch +x86-fix-oprofile-double-free-was-re-multiple-free.patchhttp://lkml.org/lkml/2007/5/30/565 fixes the above patch :-)
Quoted 6 lines
I don't know what you mean. The code is already using
for_each_possible_cpu()and x86-fix-oprofile-double-free-was-re-multiple-free.patch doesn't change that.
Yes, the code, i.e. nmi_setup already uses for_each_possible_cpu(), that is not the problem. The problem is allocate_msr doing a for_each_online_cpu(), i.e. not allocating for each_possible_cpu. Chris tested and acked the patch: http://lkml.org/lkml/2007/5/31/36
- Arnaldo
Quoted 1 line · Andrew Morton
...
Quoted 2 lines
(quoted diff) +2
-0+msi-fix-the-ordering-of-msix-irqs.patch +msi-mask-the-msix-vector-before-we-unmap-it.patch
...
Quoted 1 line
2.6.22 probable-queue
I think these two should be in the 2.6.22 definite-queue, unless Eric disagrees.
cheers
Quoted 9 lines · Michael Ellerman
Quoted 1 line · Andrew Morton
...
Quoted 2 lines
(quoted diff) +2
-0+msi-fix-the-ordering-of-msix-irqs.patch +msi-mask-the-msix-vector-before-we-unmap-it.patch...
Quoted 1 line
2.6.22 probable-queue
I think these two should be in the 2.6.22 definite-queue, unless Eric disagrees.
They are simple bug fixes for regression in 2.6.22 so I don't see a reason to delay them.
Eric
2.6.22-rc3-mm1: IA64 make allnoconfig broken
In reply to Andrew MortonOn (30/05/07 23:58), Andrew Morton didst pronounce:
Quoted 6 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc3/2.6.22-rc3-mm1/
- Merged the convert-cpusets-to-container-infrastructure patches. These will probably be dropped and redone.
Came across this while automating allnoconfig, allmodconfig
and defconfig build tests. I haven't checked to make 100% sure but rework-ptep_set_access_flags-and-fix-sun4c.patch is the most likely candidate based on the error - patch author cc'd.
Test result
===========
Machine name: elm3b10 Architecture: ia64 Build args: kernel 2.6.22-rc3-mm1 Result: Failed
Standard build: Completed successfully make allnoconfig build: Failed and terminated the run 06/01/07-08:10:54 building kernel - make -j4 vmlinux.gz CHK include/linux/version.h UPD include/linux/version.h CHK include/linux/utsrelease.h UPD include/linux/utsrelease.h SYMLINK include/asm -> include/asm-ia64 HOSTCC scripts/basic/fixdep HOSTCC scripts/basic/docproc CC arch/ia64/kernel/asm-offsets.s CC scripts/mod/empty.o HOSTCC scripts/mod/mk_elfconfig MKELF scripts/mod/elfconfig.h HOSTCC scripts/mod/file2alias.o GEN include/asm-ia64/asm-offsets.h CALL scripts/checksyscalls.sh <stdin>:1380:2: warning: #warning syscall revokeat not implemented <stdin>:1384:2: warning: #warning syscall frevoke not implemented <stdin>:1392:2: warning: #warning syscall sched_yield_to not implemented HOSTCC scripts/mod/modpost.o HOSTCC scripts/kallsyms HOSTCC scripts/mod/sumversion.o HOSTCC scripts/conmakehash HOSTLD scripts/mod/modpost CC init/main.o LD usr/built-in.o CHK include/linux/compile.h UPD include/linux/compile.h CC arch/ia64/kernel/acpi.o CC init/do_mounts.o AS arch/ia64/kernel/entry.o CC arch/ia64/kernel/efi.o CC init/noinitramfs.o CC init/calibrate.o CC init/version.o LD init/mounts.o LD init/built-in.o AS arch/ia64/kernel/efi_stub.o CC arch/ia64/mm/init.o LDS arch/ia64/kernel/gate.lds AS arch/ia64/kernel/gate.o AS arch/ia64/kernel/fsys.o CC arch/ia64/kernel/ia64_ksyms.o CC arch/ia64/kernel/irq.o CC arch/ia64/mm/fault.o CC arch/ia64/kernel/irq_ia64.o CC arch/ia64/mm/tlb.o CC arch/ia64/kernel/irq_lsapic.o CC arch/ia64/mm/extable.o AS arch/ia64/kernel/ivt.o CC arch/ia64/kernel/machvec.o CC arch/ia64/mm/ioremap.o AS arch/ia64/kernel/pal.o CC arch/ia64/kernel/patch.o CC arch/ia64/kernel/process.o CC arch/ia64/mm/numa.o CC arch/ia64/mm/discontig.o CC arch/ia64/kernel/perfmon.o LD arch/ia64/mm/built-in.o CC arch/ia64/kernel/ptrace.o CC arch/ia64/dig/setup.o CC arch/ia64/dig/machvec.o LD arch/ia64/dig/built-in.o CC arch/ia64/kernel/sal.o CC kernel/sched.o CC arch/ia64/kernel/salinfo.o CC arch/ia64/kernel/semaphore.o CC arch/ia64/kernel/setup.o CC arch/ia64/kernel/signal.o
{standard input}: Assembler messages:
{standard input}:12494: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:12494: Warning: Only the first path encountering the conflict is reported {standard input}:12493: Warning: This is the location of the conflicting usage {standard input}:12494: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:12494: Warning: Only the first path encountering the conflict is reported {standard input}:12493: Warning: This is the location of the conflicting usage {standard input}:12494: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:12494: Warning: Only the first path encountering the conflict is reported {standard input}:12493: Warning: This is the location of the conflicting usage {standard input}:12494: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:12494: Warning: Only the first path encountering the conflict is reported {standard input}:12493: Warning: This is the location of the conflicting usage {standard input}:12494: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:12494: Warning: Only the first path encountering the conflict is reported {standard input}:12493: Warning: This is the location of the conflicting usage {standard input}:12495: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:12495: Warning: Only the first path encountering the conflict is reported {standard input}:12493: Warning: This is the location of the conflicting usage {standard input}:12495: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:12495: Warning: Only the first path encountering the conflict is reported {standard input}:12493: Warning: This is the location of the conflicting usage {standard input}:12495: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:12495: Warning: Only the first path encountering the conflict is reported {standard input}:12493: Warning: This is the location of the conflicting usage {standard input}:12495: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:12495: Warning: Only the first path encountering the conflict is reported {standard input}:12493: Warning: This is the location of the conflicting usage {standard input}:12495: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:12495: Warning: Only the first path encountering the conflict is reported {standard input}:12493: Warning: This is the location of the conflicting usage {standard input}:12495: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:12495: Warning: Only the first path encountering the conflict is reported {standard input}:12494: Warning: This is the location of the conflicting usage {standard input}:12495: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:12495: Warning: Only the first path encountering the conflict is reported {standard input}:12494: Warning: This is the location of the conflicting usage {standard input}:12495: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:12495: Warning: Only the first path encountering the conflict is reported {standard input}:12494: Warning: This is the location of the conflicting usage {standard input}:12495: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:12495: Warning: Only the first path encountering the conflict is reported {standard input}:12494: Warning: This is the location of the conflicting usage {standard input}:12495: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:12495: Warning: Only the first path encountering the conflict is reported {standard input}:12494: Warning: This is the location of the conflicting usage {standard input}:12496: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:12496: Warning: Only the first path encountering the conflict is reported {standard input}:12493: Warning: This is the location of the conflicting usage {standard input}:12496: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:12496: Warning: Only the first path encountering the conflict is reported {standard input}:12493: Warning: This is the location of the conflicting usage {standard input}:12496: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:12496: Warning: Only the first path encountering the conflict is reported {standard input}:12493: Warning: This is the location of the conflicting usage {standard input}:12496: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:12496: Warning: Only the first path encountering the conflict is reported {standard input}:12493: Warning: This is the location of the conflicting usage {standard input}:12496: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:12496: Warning: Only the first path encountering the conflict is reported {standard input}:12493: Warning: This is the location of the conflicting usage {standard input}:12496: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:12496: Warning: Only the first path encountering the conflict is reported {standard input}:12494: Warning: This is the location of the conflicting usage {standard input}:12496: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:12496: Warning: Only the first path encountering the conflict is reported {standard input}:12494: Warning: This is the location of the conflicting usage {standard input}:12496: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:12496: Warning: Only the first path encountering the conflict is reported {standard input}:12494: Warning: This is the location of the conflicting usage {standard input}:12496: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:12496: Warning: Only the first path encountering the conflict is reported {standard input}:12494: Warning: This is the location of the conflicting usage {standard input}:12496: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:12496: Warning: Only the first path encountering the conflict is reported {standard input}:12494: Warning: This is the location of the conflicting usage {standard input}:12496: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:12496: Warning: Only the first path encountering the conflict is reported {standard input}:12495: Warning: This is the location of the conflicting usage {standard input}:12496: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:12496: Warning: Only the first path encountering the conflict is reported {standard input}:12495: Warning: This is the location of the conflicting usage {standard input}:12496: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:12496: Warning: Only the first path encountering the conflict is reported {standard input}:12495: Warning: This is the location of the conflicting usage {standard input}:12496: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:12496: Warning: Only the first path encountering the conflict is reported {standard input}:12495: Warning: This is the location of the conflicting usage {standard input}:12496: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:12496: Warning: Only the first path encountering the conflict is reported {standard input}:12495: Warning: This is the location of the conflicting usage
CC kernel/fork.o CC arch/ia64/kernel/sys_ia64.o CC arch/ia64/kernel/time.o CC arch/ia64/kernel/traps.o
{standard input}: Assembler messages:
{standard input}:3480: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:3480: Warning: Only the first path encountering the conflict is reported {standard input}:3479: Warning: This is the location of the conflicting usage {standard input}:3480: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:3480: Warning: Only the first path encountering the conflict is reported {standard input}:3479: Warning: This is the location of the conflicting usage {standard input}:3480: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:3480: Warning: Only the first path encountering the conflict is reported {standard input}:3479: Warning: This is the location of the conflicting usage {standard input}:3480: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:3480: Warning: Only the first path encountering the conflict is reported {standard input}:3479: Warning: This is the location of the conflicting usage {standard input}:3480: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:3480: Warning: Only the first path encountering the conflict is reported {standard input}:3479: Warning: This is the location of the conflicting usage {standard input}:3481: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:3481: Warning: Only the first path encountering the conflict is reported {standard input}:3479: Warning: This is the location of the conflicting usage {standard input}:3481: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:3481: Warning: Only the first path encountering the conflict is reported {standard input}:3479: Warning: This is the location of the conflicting usage {standard input}:3481: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:3481: Warning: Only the first path encountering the conflict is reported {standard input}:3479: Warning: This is the location of the conflicting usage {standard input}:3481: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:3481: Warning: Only the first path encountering the conflict is reported {standard input}:3479: Warning: This is the location of the conflicting usage {standard input}:3481: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:3481: Warning: Only the first path encountering the conflict is reported {standard input}:3479: Warning: This is the location of the conflicting usage {standard input}:3481: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:3481: Warning: Only the first path encountering the conflict is reported {standard input}:3480: Warning: This is the location of the conflicting usage {standard input}:3481: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:3481: Warning: Only the first path encountering the conflict is reported {standard input}:3480: Warning: This is the location of the conflicting usage {standard input}:3481: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:3481: Warning: Only the first path encountering the conflict is reported {standard input}:3480: Warning: This is the location of the conflicting usage {standard input}:3481: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:3481: Warning: Only the first path encountering the conflict is reported {standard input}:3480: Warning: This is the location of the conflicting usage {standard input}:3481: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:3481: Warning: Only the first path encountering the conflict is reported {standard input}:3480: Warning: This is the location of the conflicting usage {standard input}:3482: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:3482: Warning: Only the first path encountering the conflict is reported {standard input}:3479: Warning: This is the location of the conflicting usage {standard input}:3482: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:3482: Warning: Only the first path encountering the conflict is reported {standard input}:3479: Warning: This is the location of the conflicting usage {standard input}:3482: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:3482: Warning: Only the first path encountering the conflict is reported {standard input}:3479: Warning: This is the location of the conflicting usage {standard input}:3482: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:3482: Warning: Only the first path encountering the conflict is reported {standard input}:3479: Warning: This is the location of the conflicting usage {standard input}:3482: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:3482: Warning: Only the first path encountering the conflict is reported {standard input}:3479: Warning: This is the location of the conflicting usage {standard input}:3482: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:3482: Warning: Only the first path encountering the conflict is reported {standard input}:3480: Warning: This is the location of the conflicting usage {standard input}:3482: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:3482: Warning: Only the first path encountering the conflict is reported {standard input}:3480: Warning: This is the location of the conflicting usage {standard input}:3482: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:3482: Warning: Only the first path encountering the conflict is reported {standard input}:3480: Warning: This is the location of the conflicting usage {standard input}:3482: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:3482: Warning: Only the first path encountering the conflict is reported {standard input}:3480: Warning: This is the location of the conflicting usage {standard input}:3482: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:3482: Warning: Only the first path encountering the conflict is reported {standard input}:3480: Warning: This is the location of the conflicting usage {standard input}:3482: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:3482: Warning: Only the first path encountering the conflict is reported {standard input}:3481: Warning: This is the location of the conflicting usage {standard input}:3482: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:3482: Warning: Only the first path encountering the conflict is reported {standard input}:3481: Warning: This is the location of the conflicting usage {standard input}:3482: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:3482: Warning: Only the first path encountering the conflict is reported {standard input}:3481: Warning: This is the location of the conflicting usage {standard input}:3482: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:3482: Warning: Only the first path encountering the conflict is reported {standard input}:3481: Warning: This is the location of the conflicting usage {standard input}:3482: Warning: Use of 'mov' may violate WAW dependency 'RR#' (impliedf) {standard input}:3482: Warning: Only the first path encountering the conflict is reported {standard input}:3481: Warning: This is the location of the conflicting usage
CC kernel/exec_domain.o CC kernel/panic.o CC arch/ia64/kernel/unaligned.o CC kernel/printk.o CC arch/ia64/kernel/unwind.o CC kernel/profile.o CC kernel/exit.o CC arch/ia64/kernel/mca.o CC kernel/itimer.o CC kernel/time.o CC kernel/softirq.o AS arch/ia64/kernel/mca_asm.o CC arch/ia64/kernel/topology.o CC kernel/resource.o CC arch/ia64/kernel/brl_emu.o CC kernel/sysctl.o CC arch/ia64/kernel/acpi-ext.o CC arch/ia64/kernel/iosapic.o CC arch/ia64/kernel/numa.o CC kernel/capability.o GATE arch/ia64/kernel/gate-syms.o AS arch/ia64/kernel/head.o CC arch/ia64/kernel/init_task.o CC kernel/ptrace.o LDS arch/ia64/kernel/vmlinux.lds GATE arch/ia64/kernel/gate.so AS arch/ia64/kernel/gate-data.o LD arch/ia64/kernel/built-in.o CC kernel/timer.o CC mm/bootmem.o CC kernel/user.o CC mm/filemap.o CC kernel/signal.o CC mm/mempool.o CC kernel/sys.o CC mm/oom_kill.o CC mm/fadvise.o CC mm/page_alloc.o CC kernel/kmod.o CC kernel/workqueue.o CC kernel/pid.o CC kernel/rcupdate.o CC kernel/extable.o CC mm/page-writeback.o CC kernel/params.o CC kernel/posix-timers.o CC mm/pdflush.o CC mm/readahead.o CC kernel/kthread.o CC mm/swap.o CC kernel/wait.o CC kernel/kfifo.o CC mm/truncate.o CC kernel/sys_ni.o CC kernel/posix-cpu-timers.o CC mm/vmscan.o CC kernel/mutex.o CC kernel/hrtimer.o
{standard input}: Assembler messages:
{standard input}:2603: Warning: Use of 'mov' may violate WAW dependency 'GR%, % in 1 - 127' (impliedf), specific resource number is 14 {standard input}:2603: Warning: Only the first path encountering the conflict is reported
{standard input}:2602: Warning: This is the location of the conflicting usage
CC mm/prio_tree.o CC mm/util.o CC kernel/rwsem.o CC kernel/latency.o CC mm/mmzone.o CC kernel/nsproxy.o CC mm/vmstat.o CC kernel/srcu.o CC mm/backing-dev.o CC kernel/die_notifier.o CC mm/fremap.o CC kernel/irq/handle.o CC mm/highmem.o CC kernel/irq/manage.o CC mm/madvise.o CC kernel/irq/spurious.o CC mm/memory.o CC kernel/irq/resend.o
mm/memory.c: In function `do_wp_page':mm/memory.c:1700: error: parse error before "__changed"mm/memory.c:1700: error: parse error before ')' tokenmm/memory.c:1704: error: parse error before "ret"mm/memory.c:1639: warning: unused variable `new_page'mm/memory.c:1641: warning: unused variable `ret'mm/memory.c:1689: error: label `unlock' used but not definedmm/memory.c:1677: error: label `unwritable_page' used but not definedmm/memory.c:1646: error: label `gotten' used but not definedmm/memory.c: At top level:mm/memory.c:1713: error: parse error before "while"mm/memory.c:1725: warning: type defaults to int' in declaration of cow_user_page' mm/memory.c:1725: warning: parameter names (without types) in function declaration mm/memory.c:1725: error: conflicting types for `cow_user_page'mm/memory.c:1590: error: previous declaration of `cow_user_page'mm/memory.c:1725: warning: data definition has no type or storage classmm/memory.c:1726: error: parse error before '}' tokenmm/memory.c:1731: warning: type defaults to int' in declaration of page_table' mm/memory.c:1731: error: braced-group within expression allowed only inside a function mm/memory.c:1731: error: `pmd' undeclared here (not in a function)mm/memory.c:1731: warning: data definition has no type or storage classmm/memory.c:1731: error: parse error before '&' tokenmm/memory.c:1731: error: braced-group within expression allowed only inside a function mm/memory.c:1731: error: `pmd' undeclared here (not in a function)mm/memory.c:1731: error: parse error before ';' tokenmm/memory.c:1731: error: `address' undeclared here (not in a function)mm/memory.c:1731: error: parse error before ')' tokenmm/memory.c:1731: error: parse error before '&' tokenmm/memory.c:1731: warning: type defaults to int' in declaration of __pte' mm/memory.c:1731: error: conflicting types for `__pte'mm/memory.c:1731: error: previous declaration of `__pte'mm/memory.c:1731: warning: data definition has no type or storage classmm/memory.c:1731: error: parse error before '}' tokenmm/memory.c:1737: error: parse error before '->' tokenmm/memory.c:1742: warning: type defaults to int' in declaration of entry' mm/memory.c:1742: error: braced-group within expression allowed only inside a function mm/memory.c:1742: error: parse error before ')' tokenmm/memory.c:1742: error: `__pg' undeclared here (not in a function)mm/memory.c:1742: error: initializer element is not constantmm/memory.c:1742: error: parse error before "unsigned"mm/memory.c:1742: warning: type defaults to int' in declaration of __pte' mm/memory.c:1742: warning: data definition has no type or storage classmm/memory.c:1742: error: parse error before '}' tokenmm/memory.c:1743: warning: type defaults to int' in declaration of entry' mm/memory.c:1743: error: redefinition of `entry'mm/memory.c:1742: error: `entry' previously defined heremm/memory.c:1743: error: request for member pte' in something not a structure or union mm/memory.c:1743: error: vma' undeclared here (not in a function)mm/memory.c:1743: error: incompatible types in initializationmm/memory.c:1743: error: initializer element is not constantmm/memory.c:1743: warning: data definition has no type or storage classmm/memory.c:1744: warning: type defaults to int' in declaration of lazy_mmu_prot_update' mm/memory.c:1744: warning: parameter names (without types) in function declaration mm/memory.c:1744: error: conflicting types for lazy_mmu_prot_update' include/asm/pgtable.h:510: error: previous declaration of lazy_mmu_prot_update' mm/memory.c:1744: warning: data definition has no type or storage classmm/memory.c:1751: error: parse error before '{' tokenmm/memory.c:1751: warning: type defaults to int' in declaration of __pte' mm/memory.c:1751: error: `vma' undeclared here (not in a function)mm/memory.c:1751: error: `address' undeclared here (not in a function)mm/memory.c:1751: warning: passing arg 3 of `ptep_get_and_clear' makes pointer from integer without a cast mm/memory.c:1751: error: incompatible types in initializationmm/memory.c:1751: error: initializer element is not constantmm/memory.c:1751: warning: data definition has no type or storage classmm/memory.c:1751: warning: type defaults to int' in declaration of flush_tlb_page' mm/memory.c:1751: warning: parameter names (without types) in function declaration mm/memory.c:1751: error: conflicting types for flush_tlb_page' include/asm/tlbflush.h:75: error: previous declaration of flush_tlb_page' mm/memory.c:1751: warning: data definition has no type or storage classmm/memory.c:1751: warning: type defaults to int' in declaration of __pte' mm/memory.c:1751: warning: data definition has no type or storage classmm/memory.c:1751: error: parse error before '}' tokenmm/memory.c:1752: error: parse error before '=' tokenmm/memory.c:1754: warning: type defaults to int' in declaration of lru_cache_add_active' mm/memory.c:1754: warning: parameter names (without types) in function declaration mm/memory.c:1754: error: conflicting types for lru_cache_add_active' include/linux/swap.h:182: error: previous declaration of lru_cache_add_active' mm/memory.c:1754: warning: data definition has no type or storage classmm/memory.c:1755: warning: type defaults to int' in declaration of page_add_new_anon_rmap' mm/memory.c:1755: warning: parameter names (without types) in function declaration mm/memory.c:1755: error: conflicting types for page_add_new_anon_rmap' include/linux/rmap.h:73: error: previous declaration of page_add_new_anon_rmap' mm/memory.c:1755: warning: data definition has no type or storage classmm/memory.c:1758: warning: type defaults to int' in declaration of new_page' mm/memory.c:1758: error: `old_page' undeclared here (not in a function)mm/memory.c:1758: warning: data definition has no type or storage classmm/memory.c:1759: error: parse error before '|=' tokenmm/memory.c:1777: warning: type defaults to int' in declaration of set_page_dirty_balance' mm/memory.c:1777: warning: parameter names (without types) in function declaration mm/memory.c:1777: error: conflicting types for set_page_dirty_balance' include/linux/writeback.h:130: error: previous declaration of set_page_dirty_balance' mm/memory.c:1777: warning: data definition has no type or storage classmm/memory.c:1778: warning: type defaults to int' in declaration of put_page' mm/memory.c:1778: warning: parameter names (without types) in function declaration mm/memory.c:1778: error: conflicting types for `put_page'include/linux/mm.h:334: error: previous declaration of `put_page'mm/memory.c:1778: warning: data definition has no type or storage classmm/memory.c:1779: error: parse error before '}' tokenmm/memory.c: In function `handle_pte_fault':mm/memory.c:2544: error: parse error before "__changed"mm/memory.c:2544: error: parse error before ')' tokenmm/memory.c:2547: error: parse error before "else"mm/memory.c:2536: error: label `unlock' used but not definedmm/memory.c: At top level:mm/memory.c:2557: error: parse error before ':' token
{standard input}: Assembler messages:
{standard input}:88: Error: symbol `entry' is already defined
make[1]: *** [mm/memory.o] Error 1
make: *** [mm] Error 2
make: *** Waiting for unfinished jobs....
CC kernel/power/main.o CC kernel/irq/chip.o CC kernel/power/process.o CC kernel/irq/devres.o CC kernel/power/console.o CC kernel/irq/autoprobe.o LD kernel/power/built-in.o CC kernel/irq/proc.o CC kernel/time/timekeeping.o LD kernel/irq/built-in.o CC kernel/time/ntp.o CC kernel/futex.o CC kernel/time/clocksource.o CC kernel/time/jiffies.o CC kernel/time/timer_list.o LD kernel/time/built-in.o CC kernel/rtmutex.o CC kernel/kallsyms.o CC kernel/ksysfs.o CC kernel/utsname_sysctl.o LD kernel/built-in.o
06/01/07-08:11:46 Build the kernel. Failed rc = 2 06/01/07-08:11:46 apack-bench-build_configs: Building kernel... Failed rc = 1 Failed and terminated the run
06/01/07-08:11:46 command complete: (1) rc=126 (TEST ABORT)
Fatal error, aborting autorun
Signature · 3 lines
Mel Gorman Part-time Phd Student Linux Technology Center University of Limerick IBM Dublin Software Lab
Andrew Morton
maintainerRe: 2.6.22-rc3-mm1: IA64 make allnoconfig broken
Quoted 4 lines · On Fri, 1 Jun 2007 17:42:04 +0100 [email protected] (Mel Gorman) wrote:
mm/memory.c: In function `do_wp_page':mm/memory.c:1700: error: parse error before "__changed"mm/memory.c:1700: error: parse error before ')' tokenmm/memory.c:1704: error: parse error before "ret"
this?
include/asm-ia64/pgtable.h renamed from include/asm-ia64/pgtable.h~rework-ptep_set_access_flags-and-fix-sun4c-fix +1 -1
@@ -546,7 +546,7 @@ extern void lazy_mmu_prot_update (pte_t# define ptep_set_access_flags (__vma, __addr, __ptep, __entry, __safely_writable) \ ({ \ int __changed = !pte_same(*(__ptep), __entry); \ - if (__changed) { \ + if (__changed) \ ptep_establish(__vma, __addr, __ptep, __entry) \ __changed; \ })
Re: 2.6.22-rc3-mm1: IA64 make allnoconfig broken
On (01/06/07 10:00), Andrew Morton didst pronounce:
Quoted 12 lines · On Fri, 1 Jun 2007 17:42:04 +0100 [email protected] (Mel Gorman) wrote:
Quoted 5 lines
mm/memory.c: In function `do_wp_page':mm/memory.c:1700: error: parse error before "__changed"mm/memory.c:1700: error: parse error before ')' tokenmm/memory.c:1704: error: parse error before "ret"this?
include/asm-ia64/pgtable.h extern void lazy_mmu_prot_update (pte_t · line 552
Quoted 8 lines
include/asm-ia64/pgtable.h renamed from include/asm-ia64/pgtable.h~rework-ptep_set_access_flags-and-fix-sun4c-fix +1
-1@@ -546,7 +546,7 @@ extern void lazy_mmu_prot_update (pte_t# define ptep_set_access_flags (__vma, __addr, __ptep, __entry, __safely_writable) \ ({ \ int __changed = !pte_same(*(__ptep), __entry); \ - if (__changed) { \ + if (__changed) \ ptep_establish(__vma, __addr, __ptep, __entry) \ __changed; \ })
Fails with
mm/memory.c: In function `do_wp_page':mm/memory.c:1700: error: parse error before "__changed" mm/memory.c: In function `handle_pte_fault':mm/memory.c:2544: error: parse error before "__changed"
Am currently testing the following;
include/asm-ia64/pgtable.h +2 -2
@@ -546,8 +546,8 @@ extern void lazy_mmu_prot_update (pte_t# define ptep_set_access_flags (__vma, __addr, __ptep, __entry, __safely_writable) \ ({ \ int __changed = !pte_same(*(__ptep), __entry); \ - if (__changed) { \ - ptep_establish(__vma, __addr, __ptep, __entry) \ + if (__changed) \ + ptep_establish(__vma, __addr, __ptep, __entry); \ __changed; \ })#endif
Signature · 4 lines
-- Mel Gorman Part-time Phd Student Linux Technology Center University of Limerick IBM Dublin Software Lab
PATCH 1/1 Fix problem with IA64 make allnoconfig
IA64 fails to build with allnoconfig due to an error in the !CONFIG_SMP case. Ths following patch fixes it and should be considered a fix to rework-ptep_set_access_flags-and-fix-sun4c.patch.
allmodconfig and defconfig tests are still running.
--- pgtable.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
include/asm-ia64/pgtable.h +2 -2
@@ -546,8 +546,8 @@ extern void lazy_mmu_prot_update (pte_t# define ptep_set_access_flags (__vma, __addr, __ptep, __entry, __safely_writable) \ ({ \ int __changed = !pte_same(*(__ptep), __entry); \ - if (__changed) { \ - ptep_establish(__vma, __addr, __ptep, __entry) \ + if (__changed) \ + ptep_establish(__vma, __addr, __ptep, __entry); \ __changed; \ })#endif
2.6.22-rc3-mm1: Xen compile error with X86_CMPXCHG=n
In reply to Andrew MortonI'm getting the following compile error in 2.6.22-rc3-mm1 with CONFIG_X86_CMPXCHG=n (with -Werror-implicit-function-declaration - otherwise it would be a link error):
<-- snip -->
...
CC drivers/xen/grant-table.o/home/bunk/linux/kernel-2.6/linux-2.6.22-rc3-mm1/drivers/xen/grant-table.c: In function ‘gnttab_end_foreign_access_ref’:/home/bunk/linux/kernel-2.6/linux-2.6.22-rc3-mm1/drivers/xen/grant-table.c:203: error: implicit declaration of function ‘sync_cmpxchg’ make[3]: *** [drivers/xen/grant-table.o] Error 1
<-- snip -->
Adding a dependency of XEN on X86_CMPXCHG should not be a problem and not prevent any reasonable real-life usage.
But what worries me is that a seemingly architecture independent driver uses a function only available in some configurations.
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon SeedRe: 2.6.22-rc3-mm1: Xen compile error with X86_CMPXCHG=n
Quoted 12 lines · Adrian Bunk
I'm getting the following compile error in 2.6.22-rc3-mm1 with
CONFIG_X86_CMPXCHG=n(with -Werror-implicit-function-declaration - otherwise it would be a link error):<-- snip -->
...
CCdrivers/xen/grant-table.o/home/bunk/linux/kernel-2.6/linux-2.6.22-rc3-mm1/drivers/xen/grant-table.c: In function ‘gnttab_end_foreign_access_ref’:/home/bunk/linux/kernel-2.6/linux-2.6.22-rc3-mm1/drivers/xen/grant-table.c:203: error: implicit declaration of function ‘sync_cmpxchg’ make[3]: *** [drivers/xen/grant-table.o] Error 1
Quoted 7 lines
<-- snip -->
Adding a dependency of XEN on
X86_CMPXCHGshould not be a problem and not prevent any reasonable real-life usage.But what worries me is that a seemingly architecture independent driver uses a function only available in some configurations.
Still present as of 2.6.22-rc6-mm1.
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon SeedRe: 2.6.22-rc3-mm1: Xen compile error with X86_CMPXCHG=n
Quoted 6 lines · Adrian Bunk
Quoted 4 lines
Adding a dependency of XEN on
X86_CMPXCHGshould not be a problem and not prevent any reasonable real-life usage.But what worries me is that a seemingly architecture independent driver uses a function only available in some configurations.
Still present as of 2.6.22-rc6-mm1.
Sorry, must have missed this one. Um, yeah, I guess we have a dependency on cmpxchg. I'll do a patch.
J
PATCH 1/1 fix XEN_BLKDEV_FRONTEND Makefile entry
In reply to Andrew MortonCONFIG_XEN_BLKDEV_FRONTEND shouldn't silently prevent the compilation of most other block drivers.
---
drivers/block/Makefile renamed from drivers/block/Makefile.old +1 -1
@@ -28,7 +28,7 @@ obj-$(CONFIG_VIODASD) += viodasd.o obj-$(CONFIG_BLK_DEV_SX8) += sx8.o obj-$(CONFIG_BLK_DEV_UB) += ub.o -obj-$(CONFIG_XEN_BLKDEV_FRONTEND) := xen-blkfront.o +obj-$(CONFIG_XEN_BLKDEV_FRONTEND) += xen-blkfront.o obj-$(CONFIG_XILINX_SYSACE) += xsysace.o obj-$(CONFIG_LGUEST_GUEST) += lguest_blk.o
2.6.22-rc3-mm1: __attribute__((weak)) considered harmful
In reply to Andrew Mortonstatistics-infrastructure-make-printk_clock-a-generic-kernel-wide-nsec-resolution.patch shows why __attribute__((weak)) is harmful because you don't see if a required non-weak implemtation is missing:
In this case, the weak printk_clock() was renamed to timestamp_clock(), but the ARM and i386 implementations weren't renamed...
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon SeedAndrew Morton
maintainerRe: 2.6.22-rc3-mm1: __attribute__((weak)) considered harmful
Quoted 7 lines · On Sat, 2 Jun 2007 19:14:25 +0200 Adrian Bunk <[email protected]> wrote:
statistics-infrastructure-make-printk_clock-a-generic-kernel-wide-nsec-resolution.patch shows why __attribute__((weak)) is harmful because you don't see if a required non-weak implemtation is missing:
In this case, the weak
printk_clock()was renamed totimestamp_clock(), but the ARM and i386 implementations weren't renamed...
printk_clock() is sched_clock() in disguise, and I'm not sure that making sched_clock() more widely available in this fashion is something that we want to do anyway.
Anyway, the statistics patches have just celebrated their first birthday and I don't see that they're getting sufficient momentum or interest to ever get into mainline so I think I'll drop them, sorry.
Re: 2.6.22-rc3-mm1: __attribute__((weak)) considered harmful
Quoted 8 lines · Andrew Morton
Quoted 4 lines · On Sat, 2 Jun 2007 19:14:25 +0200 Adrian Bunk <[email protected]> wrote:
statistics-infrastructure-make-printk_clock-a-generic-kernel-wide-nsec-resolution.patch shows why __attribute__((weak)) is harmful because you don't see if a required non-weak implemtation is missing:
In this case, the weak
printk_clock()was renamed totimestamp_clock(), but the ARM and i386 implementations weren't renamed...
Quoted 7 lines
printk_clock()issched_clock()in disguise, and I'm not sure that makingsched_clock()more widely available in this fashion is something that we want to do anyway.Anyway, the statistics patches have just celebrated their first birthday and I don't see that they're getting sufficient momentum or interest to ever get into mainline so I think I'll drop them, sorry.
Andrew,
the lock contention statistics, which have been added to -mm recently, duplicate code that we have in the statistics patches. I think I can slim the lock tracking patches further down considerably (similar to my attempt at timerstats). I have a working prototype that is getting some polishing brushes. Would you like to wait how this goes?
As to timestamp_clock(): its useful for statistics, but still a minor feature. It would be unfortuante if that was the stumbling block for my patches. Am I right that the fix for the issue pointed at by Adrian is to rename those two occurrences of printk_clock()? Do you want me to submit a patch?
Re: 2.6.22-rc3-mm1: __attribute__((weak)) considered harmful
Quoted 8 lines · Martin Peschke
Quoted 7 lines · Andrew Morton
Quoted 4 lines · On Sat, 2 Jun 2007 19:14:25 +0200 Adrian Bunk <[email protected]> wrote:
statistics-infrastructure-make-printk_clock-a-generic-kernel-wide-nsec-resolution.patch shows why __attribute__((weak)) is harmful because you don't see if a required non-weak implemtation is missing:
Quoted 7 lines
Quoted 7 lines
Quoted 3 lines
In this case, the weak
printk_clock()was renamed totimestamp_clock(), but the ARM and i386 implementations weren't renamed...
printk_clock()issched_clock()in disguise, and I'm not sure that makingsched_clock()more widely available in this fashion is something that we want to do anyway.
Note that sched_clock() can not be used early on ARM; it might want to access MMIO which is not accessible until later in setup_arch(). This is why ARM's printk_clock() divorces itself from sched_clock().
Quoted 5 lines
As to
timestamp_clock(): its useful for statistics, but still a minor feature. It would be unfortuante if that was the stumbling block for my patches. Am I right that the fix for the issue pointed at by Adrian is to rename those two occurrences ofprintk_clock()? Do you want me to submit a patch?
If it's ends up being based upon sched_clock() instead of printk_clock() on ARM then it'll break stuff horribly (== non-bootable kernels.)
Signature · 3 lines
Russell King Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/ maintainer of:
PATCH 1/1 the ASYNC_* options shouldn't be user visible
In reply to Andrew MortonQuoted 7 lines · Andrew Morton
...
Changes since 2.6.22-rc2-mm1:
...
git-md-accel.patch
...
git trees
...
The ASYNC_* options are for internal helper code and should therefore not be user visible.
---
BTW: Please move the async_tx directory under drivers/ or lib/
async_tx/Kconfig | 28 ++++++++-------------------- 1 file changed, 8 insertions(+), 20 deletions(-)
async_tx/Kconfig renamed from async_tx/Kconfig.old +8 -20
@@ -1,27 +1,15 @@ -menuconfig ASYNC_CORE - tristate "Asynchronous Bulk Memory Transfers/Transforms" - default n - ---help--- - This enables the async_tx interface layer for dma (offload) engines. - Subsystems coded to this api will use offload engines for bulk memory - operations (e.g. memcpy, memset, xor...). When an offload engine is not - available the interface will implicitly fall back to a software - implementation of the operation. - - If unsure, say N - -if ASYNC_CORE +config ASYNC_CORE + tristate config ASYNC_MEMCPY - default m - tristate "async_memcpy support" + tristate + select ASYNC_CORE config ASYNC_XOR - default m - tristate "async_xor support" + tristate + select ASYNC_CORE config ASYNC_MEMSET - default m - tristate "async_memset support" + tristate + select ASYNC_CORE -endif
RE: [-mm patch] the ASYNC_* options shouldn't be user visible
Quoted 10 lines
From: Adrian Bunk [mailto:[email protected]]
Quoted 7 lines
...
Changes since 2.6.22-rc2-mm1:
...
git-md-accel.patch
...
git trees
...
Quoted 9 lines
The ASYNC_* options are for internal helper code and should therefore not be user visible.
Signed-off-by Adrian Bunk <[email protected]>---
BTW: Please move the
async_txdirectory underdrivers/orlib/
Yes, I was feeling somewhat exposed with the options in the top level config, but at least it got a few more eyes on the code. I will fold in your patch and move async_tx under lib/ for now, but at some point I would like to investigate the potential synergies with crypto/.
Thanks,
Dan
PATCH 1/1 make drivers/firmware/dmi-id.c:dmi_id_init() static
In reply to Andrew MortonThis patch makes the needlessly global dmi_id_init() static.
---
drivers/firmware/dmi-id.c renamed from drivers/firmware/dmi-id.c.old +1 -1
@@ -161,7 +161,7 @@extern int dmi_available; -int __init dmi_id_init (void ) +static int __init dmi_id_init (void ) {int ret, i;
Re: [-mm patch] make drivers/firmware/dmi-id.c:dmi_id_init() static
Quoted 3 lines · Adrian Bunk
This patch makes the needlessly global
dmi_id_init()static.Signed-off-by Adrian Bunk <[email protected]>
Thanks, I've merged this with the original.
greg k-h
PATCH 1/1 drivers/i2c/chips/ds1682.c: make code static
In reply to Andrew MortonThis patch makes some needlessly global code static.
---
drivers/i2c/chips/ds1682.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/i2c/chips/ds1682.c renamed from drivers/i2c/chips/ds1682.c.old +6 -6
@@ -121,12 +121,12 @@/* * Simple register attributes */ -SENSOR_DEVICE_ATTR_2 (elapsed_time,S_IRUGO |S_IWUSR , ds1682_show, ds1682_store, -4 ,DS1682_REG_ELAPSED ); -SENSOR_DEVICE_ATTR_2 (alarm_time,S_IRUGO |S_IWUSR , ds1682_show, ds1682_store, -4 ,DS1682_REG_ALARM ); -SENSOR_DEVICE_ATTR_2 (event_count,S_IRUGO |S_IWUSR , ds1682_show, ds1682_store, -2 ,DS1682_REG_EVT_CNTR ); +static SENSOR_DEVICE_ATTR_2(elapsed_time, S_IRUGO | S_IWUSR, ds1682_show, + ds1682_store, 4, DS1682_REG_ELAPSED); +static SENSOR_DEVICE_ATTR_2(alarm_time, S_IRUGO | S_IWUSR, ds1682_show, + ds1682_store, 4, DS1682_REG_ALARM); +static SENSOR_DEVICE_ATTR_2(event_count, S_IRUGO | S_IWUSR, ds1682_show, + ds1682_store, 2, DS1682_REG_EVT_CNTR);static const struct attribute_group ds1682_group = { .attrs = (struct attribute *[]) {
Re: [-mm patch] drivers/i2c/chips/ds1682.c: make code static
Hi Adrian,
Quoted 20 lines · Adrian Bunk
This patch makes some needlessly global code static.
Signed-off-by Adrian Bunk <[email protected]>---
drivers/i2c/chips/ds1682.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)drivers/i2c/chips/ds1682.c renamed from drivers/i2c/chips/ds1682.c.old +0
-5@@ -121,12 +121,12 @@/* * Simple register attributes */ -SENSOR_DEVICE_ATTR_2 (elapsed_time,S_IRUGO |S_IWUSR , ds1682_show, ds1682_store, -4 ,DS1682_REG_ELAPSED ); -SENSOR_DEVICE_ATTR_2 (alarm_time,S_IRUGO |S_IWUSR , ds1682_show, ds1682_store, -4 ,DS1682_REG_ALARM ); -SENSOR_DEVICE_ATTR_2(event_count, S_IRUGO | S_IWUSR, ds1682_show, ds1682_store,
drivers/i2c/chips/ds1682.c line 132
Quoted 10 lines
drivers/i2c/chips/ds1682.c renamed from drivers/i2c/chips/ds1682.c.old +6
-1- 2, DS1682_REG_EVT_CNTR); +static SENSOR_DEVICE_ATTR_2(elapsed_time, S_IRUGO | S_IWUSR, ds1682_show, + ds1682_store, 4, DS1682_REG_ELAPSED); +static SENSOR_DEVICE_ATTR_2(alarm_time, S_IRUGO | S_IWUSR, ds1682_show, + ds1682_store, 4, DS1682_REG_ALARM); +static SENSOR_DEVICE_ATTR_2(event_count, S_IRUGO | S_IWUSR, ds1682_show, + ds1682_store, 2, DS1682_REG_EVT_CNTR);static const struct attribute_group ds1682_group = { .attrs = (struct attribute *[]) {
Good catch. I've folded this fix into i2c-ds1628-new-driver.patch, thanks for reporting.
Signature · 1 line
Jean Delvare
PATCH 1/1 make xpad_play_effect() static
In reply to Andrew MortonQuoted 7 lines · Andrew Morton
...
Changes since 2.6.22-rc2-mm1:
...
git-input.patch
...
git trees
...
This patch makes the needlessly global xpad_play_effect() static.
---
drivers/input/joystick/xpad.c renamed from drivers/input/joystick/xpad.c.old +2 -1
@@ -376,7 +376,8 @@ __FUNCTION__, retval); } -int xpad_play_effect (struct input_dev *dev,void *data,struct ff_effect *effect) +static int xpad_play_effect (struct input_dev *dev,void *data, +struct ff_effect *effect) {struct usb_xpad *xpad =input_get_drvdata (dev);
PATCH 1/1 fix the tea5761 tuner support
In reply to Andrew MortonQuoted 7 lines · Andrew Morton
...
Changes since 2.6.22-rc2-mm1:
...
git-dvb.patch
...
git trees
...
Due to a typo the tea5761 tuner support was dead code.
This patch also fixes a bug in the no longer dead code:
A void function can't return anything.
---
drivers/media/video/tuner-core.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/media/video/tuner-core.c renamed from drivers/media/video/tuner-core.c.old +4 -4
@@ -25,7 +25,7 @@/* standard i2c insmod options */ static unsigned short normal_i2c[] = { -#ifdef CONFIG_TUNER_5761 +#ifdef CONFIG_TUNER_TEA5761 0x10, #endif 0x42, 0x43, 0x4a, 0x4b, /* tda8290 */
@@ -192,12 +192,12 @@ static void set_type(struct i2c_client * } t->mode_mask =T_RADIO ;break ; -#ifdef CONFIG_TUNER_5761 +#ifdef CONFIG_TUNER_TEA5761 case TUNER_TEA5761 :if (tea5761_tuner_init (c) ==EINVAL ) { t->type =TUNER_ABSENT ; t->mode_mask =T_UNINITIALIZED ; -return -ENODEV ; +return ; } t->mode_mask =T_RADIO ;break ;
@@ -473,7 +473,7 @@ static int tuner_attach(struct i2c_adapt/* autodetection code based on the i2c addr */ if (!no_autodetect) {switch (addr) { -#ifdef CONFIG_TUNER_5761 +#ifdef CONFIG_TUNER_TEA5761 case 0x10 :if (tea5761_autodetection (&t->i2c) !=EINVAL ) { t->type =TUNER_TEA5761 ;
2.6.22-rc3-mm1 - pppd hanging in netdev_run_todo while holding mutex
In reply to Andrew MortonQuoted 1 line · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc3/2.6.22-rc3-mm1/
Under 22-rc2-mm1, if my VPN connection got reset, ppp0 just quietly went away.
Under 22-rc3-mm1, it seems to end up wedged and waiting for references to go away:
Jun 4 09:23:01 turing-police kernel: [90089.270707] unregister_netdevice: waiting for ppp0 to become free. Usage count = 8 Jun 4 09:23:11 turing-police kernel: [90099.396121] unregister_netdevice: waiting for ppp0 to become free. Usage count = 8 Jun 4 09:23:21 turing-police kernel: [90109.520574] unregister_netdevice: waiting for ppp0 to become free. Usage count = 8 Jun 4 09:23:32 turing-police kernel: [90119.653129] unregister_netdevice: waiting for ppp0 to become free. Usage count = 8
'echo t > /proc/sysrq_trigger' shows pppd hung up here:
Jun 4 10:52:57 turing-police kernel: [95478.047892] pppd D 0000000105ad3830 4968 3815 1 (NOTLB) Jun 4 10:52:57 turing-police kernel: [95478.047902] ffff810008d5fd78 0000000000000086 0000000000000000 ffff810003490000 Jun 4 10:52:57 turing-police kernel: [95478.047911] ffff810008d5fd28 ffff810008d4a040 ffff810003461820 ffff810008d4a2b0 Jun 4 10:52:57 turing-police kernel: [95478.047920] 0000000105ad3733 0000000000000202 00000000000000ff ffffffff80239795 Jun 4 10:52:57 turing-police kernel: [95478.047928] Call Trace: Jun 4 10:52:57 turing-police kernel: [95478.047936] [<ffffffff805207a2>] schedule_timeout+0x8d/0xb4 Jun 4 10:52:57 turing-police kernel: [95478.047945] [<ffffffff805207e2>] schedule_timeout_uninterruptible+0x19/0x1b Jun 4 10:52:57 turing-police kernel: [95478.047954] [<ffffffff802397bb>] msleep+0x14/0x1e Jun 4 10:52:57 turing-police kernel: [95478.047963] [<ffffffff8048aa4e>] netdev_run_todo+0x12f/0x234 Jun 4 10:52:57 turing-police kernel: [95478.047972] [<ffffffff8049166f>] rtnl_unlock+0x35/0x37 Jun 4 10:52:57 turing-police kernel: [95478.047981] [<ffffffff804894a9>] unregister_netdev+0x1e/0x23 Jun 4 10:52:57 turing-police kernel: [95478.047994] [<ffffffff88a5f2c2>] :ppp_generic:ppp_shutdown_interface+0x67/0xbb Jun 4 10:52:57 turing-police kernel: [95478.048018] [<ffffffff88a5f5b8>] :ppp_generic:ppp_release+0x33/0x65 Jun 4 10:52:57 turing-police kernel: [95478.048028] [<ffffffff8028d54a>] __fput+0xac/0x176 Jun 4 10:52:57 turing-police kernel: [95478.048036] [<ffffffff8028d628>] fput+0x14/0x16 Jun 4 10:52:57 turing-police kernel: [95478.048045] [<ffffffff8028a9c6>] filp_close+0x66/0x71 Jun 4 10:52:57 turing-police kernel: [95478.048054] [<ffffffff8028bd54>] sys_close+0x98/0xd7 Jun 4 10:52:57 turing-police kernel: [95478.048062] [<ffffffff8020a03c>] tracesys+0xdc/0xe1 Jun 4 10:52:57 turing-police kernel: [95478.048073] [<00002b45cd2429a0>]
Which in itself wouldn't be so bad, except that it's holding a mutex and lots of other stuff gets wedged up waiting for it (here's 1 of 6 processes that was wedged this morning):
Jun 4 10:52:58 turing-police kernel: [95478.051129] ifconfig D ffff810005e19820 5800 9787 20510 (NOTLB) Jun 4 10:52:58 turing-police kernel: [95478.051141] ffff81000868fd08 0000000000000082 ffff81000868fec8 0000000000000246 Jun 4 10:52:58 turing-police kernel: [95478.051150] 0000000100000101 ffff810005e19820 ffff810003fe0820 ffff810005e19a90 Jun 4 10:52:58 turing-police kernel: [95478.051159] 000000000a3f26c0 0000000000000006 ffff81000868ff28 ffffffff8028aacc Jun 4 10:52:58 turing-police kernel: [95478.051167] Call Trace: Jun 4 10:52:58 turing-police kernel: [95478.051176] [<ffffffff80520bc4>] __mutex_lock_slowpath+0x74/0xb6 Jun 4 10:52:58 turing-police kernel: [95478.051185] [<ffffffff805209f3>] mutex_lock+0xe/0x10 Jun 4 10:52:58 turing-police kernel: [95478.051193] [<ffffffff8048a938>] netdev_run_todo+0x19/0x234 Jun 4 10:52:58 turing-police kernel: [95478.051202] [<ffffffff8049166f>] rtnl_unlock+0x35/0x37 Jun 4 10:52:58 turing-police kernel: [95478.051210] [<ffffffff8048a3f2>] dev_ioctl+0x3e3/0x483 Jun 4 10:52:58 turing-police kernel: [95478.051218] [<ffffffff8047df30>] sock_ioctl+0x1ef/0x1fc Jun 4 10:52:58 turing-police kernel: [95478.051227] [<ffffffff802989be>] do_ioctl+0x2a/0x77 Jun 4 10:52:58 turing-police kernel: [95478.051235] [<ffffffff80298c52>] vfs_ioctl+0x247/0x264 Jun 4 10:52:58 turing-police kernel: [95478.051243] [<ffffffff80298cce>] sys_ioctl+0x5f/0x85 Jun 4 10:52:58 turing-police kernel: [95478.051252] [<ffffffff8020a03c>] tracesys+0xdc/0xe1
(And of course, you can't shutdown cleanly, because /etc/init.d/network tries to down other interfaces on the way out, and....)
I'd bisect this, except I don't have a better way to replicate it than "wait for our VPN box to reset the connection after 24 hours of connect" - basically means I get 2 tries per weekend..)
An hour or so of digging through the -rc3-mm1 broken-out/ didn't find any obvious-to-me culprits. Any ideas/suggestions?
Andrew Morton
maintainerRe: 2.6.22-rc3-mm1 - pppd hanging in netdev_run_todo while holding mutex
Quoted 5 lines · On Mon, 04 Jun 2007 14:00:56 -0400 [email protected] wrote:
Quoted 1 line · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc3/2.6.22-rc3-mm1/
Under 22-rc2-mm1, if my VPN connection got reset, ppp0 just quietly went away.
Quoted 7 lines
Under 22-rc3-mm1, it seems to end up wedged and waiting for references to go away:
Jun 4 09:23:01 turing-police kernel: [90089.270707] unregister_netdevice: waiting for ppp0 to become free. Usage count = 8 Jun 4 09:23:11 turing-police kernel: [90099.396121] unregister_netdevice: waiting for ppp0 to become free. Usage count = 8 Jun 4 09:23:21 turing-police kernel: [90109.520574] unregister_netdevice: waiting for ppp0 to become free. Usage count = 8 Jun 4 09:23:32 turing-police kernel: [90119.653129] unregister_netdevice: waiting for ppp0 to become free. Usage count = 8
Interesting refcount.
Quoted 13 lines
'echo t >
/proc/sysrq_trigger' shows pppd hung up here:Jun 4 10:52:57 turing-police kernel: [95478.047892] pppd D 0000000105ad3830 4968 3815 1 (NOTLB) Jun 4 10:52:57 turing-police kernel: [95478.047902] ffff810008d5fd78 0000000000000086 0000000000000000 ffff810003490000 Jun 4 10:52:57 turing-police kernel: [95478.047911] ffff810008d5fd28 ffff810008d4a040 ffff810003461820 ffff810008d4a2b0 Jun 4 10:52:57 turing-police kernel: [95478.047920] 0000000105ad3733 0000000000000202 00000000000000ff ffffffff80239795 Jun 4 10:52:57 turing-police kernel: [95478.047928] Call Trace: Jun 4 10:52:57 turing-police kernel: [95478.047936] [<ffffffff805207a2>] schedule_timeout+0x8d/0xb4 Jun 4 10:52:57 turing-police kernel: [95478.047945] [<ffffffff805207e2>] schedule_timeout_uninterruptible+0x19/0x1b Jun 4 10:52:57 turing-police kernel: [95478.047954] [<ffffffff802397bb>] msleep+0x14/0x1e Jun 4 10:52:57 turing-police kernel: [95478.047963] [<ffffffff8048aa4e>] netdev_run_todo+0x12f/0x234 Jun 4 10:52:57 turing-police kernel: [95478.047972] [<ffffffff8049166f>] rtnl_unlock+0x35/0x37 Jun 4 10:52:57 turing-police kernel: [95478.047981] [<ffffffff804894a9>] unregister_netdev+0x1e/0x23
Quoted 8 lines
Jun 4 10:52:57 turing-police kernel: [95478.047994] [<ffffffff88a5f2c2>] :ppp_generic:ppp_shutdown_interface+0x67/0xbb Jun 4 10:52:57 turing-police kernel: [95478.048018] [<ffffffff88a5f5b8>] :ppp_generic:ppp_release+0x33/0x65 Jun 4 10:52:57 turing-police kernel: [95478.048028] [<ffffffff8028d54a>] __fput+0xac/0x176 Jun 4 10:52:57 turing-police kernel: [95478.048036] [<ffffffff8028d628>] fput+0x14/0x16 Jun 4 10:52:57 turing-police kernel: [95478.048045] [<ffffffff8028a9c6>] filp_close+0x66/0x71 Jun 4 10:52:57 turing-police kernel: [95478.048054] [<ffffffff8028bd54>] sys_close+0x98/0xd7 Jun 4 10:52:57 turing-police kernel: [95478.048062] [<ffffffff8020a03c>] tracesys+0xdc/0xe1 Jun 4 10:52:57 turing-police kernel: [95478.048073] [<00002b45cd2429a0>]
I don't know what could have caused this, sorry. If it's still there in next -mm (which is still 100000 compile fixes away) it'd be good if you could bisect it. Suspects would be git-net.patch, get-netdev-all.patch and gregkh-driver-*.patch
Thanks.
PATCH 1/1 e1000: #if 0 two functions
In reply to Andrew Mortone1000_{read,write}_pci_cfg() are no longer used.
---
drivers/net/e1000/e1000_hw.h | 2 -- drivers/net/e1000/e1000_main.c | 4 ++++ 2 files changed, 4 insertions(+), 2 deletions(-)
drivers/net/e1000/e1000_hw.h renamed from drivers/net/e1000/e1000_hw.h.old +0 -2
@@ -421,8 +421,6 @@ void e1000_tbi_adjust_stats(struct e1000void e1000_get_bus_info (struct e1000_hw *hw);void e1000_pci_set_mwi (struct e1000_hw *hw);void e1000_pci_clear_mwi (struct e1000_hw *hw); -void e1000_read_pci_cfg (struct e1000_hw *hw,uint32_t reg,uint16_t * value); -void e1000_write_pci_cfg (struct e1000_hw *hw,uint32_t reg,uint16_t * value);int32_t e1000_read_pcie_cap_reg (struct e1000_hw *hw,uint32_t reg,uint16_t *value);void e1000_pcix_set_mmrbc (struct e1000_hw *hw,int mmrbc);int e1000_pcix_get_mmrbc (struct e1000_hw *hw);
drivers/net/e1000/e1000_main.c renamed from drivers/net/e1000/e1000_main.c.old +4 -0
@@ -4888,6 +4888,8 @@ e1000_pci_clear_mwi(struct e1000_hw *hw)pci_clear_mwi (adapter->pdev); } +#if 0 +void e1000_read_pci_cfg (struct e1000_hw *hw,uint32_t reg,uint16_t *value) {
@@ -4904,6 +4906,8 @@ e1000_write_pci_cfg(struct e1000_hw *hw, pci_write_config_word(adapter->pdev, reg, *value); } +#endif /* 0 */ +int e1000_pcix_get_mmrbc (struct e1000_hw *hw) {
PATCH 1/1 drivers/mmc/core/core.{h,c}: cleanups
In reply to Andrew MortonQuoted 7 lines · Andrew Morton
...
Changes since 2.6.22-rc2-mm1:
...
git-mmc.patch
...
git trees
...
This patch contains the following cleanups:
- make the following needlessly global functions static:
- core.c: mmc_schedule_delayed_work()
- core.c: mmc_flush_scheduled_work()
- removes the prototope of the following non-existing function:
- core.h: mmc_schedule_work()
- proper prototypes for three functions from core.c in core.h
---
drivers/mmc/core/core.c | 37 +++++++++++++++++++------------------ drivers/mmc/core/core.h | 6 +++--- drivers/mmc/core/host.c | 4 ---- 3 files changed, 22 insertions(+), 25 deletions(-)
drivers/mmc/core/core.h renamed from drivers/mmc/core/core.h.old +3 -3
@@ -64,9 +64,9 @@ static inline void mmc_delay(unsigned in } } -int mmc_schedule_work (struct work_struct *work); -int mmc_schedule_delayed_work (struct delayed_work *work,unsigned long delay); -void mmc_flush_scheduled_work (void ); +void mmc_rescan (struct work_struct *work); +void mmc_start_host (struct mmc_host *host); +void mmc_stop_host (struct mmc_host *host);#endif
drivers/mmc/core/core.c renamed from drivers/mmc/core/core.c.old +19 -18
@@ -37,6 +37,25 @@extern int mmc_attach_mmc (struct mmc_host *host,u32 ocr);extern int mmc_attach_sd (struct mmc_host *host,u32 ocr); +static struct workqueue_struct *workqueue; + +/* +* Internal function. Schedule delayed work in the MMC work queue. +*/ +static int mmc_schedule_delayed_work (struct delayed_work *work, +unsigned long delay) +{ +return queue_delayed_work (workqueue, work, delay); +} + +/* +* Internal function. Flush all scheduled work from the MMC work queue. +*/ +static void mmc_flush_scheduled_work (void ) +{ +flush_workqueue (workqueue); +} +/** * mmc_request_done - finish processing an MMC request * @host: MMC host which completed request
@@ -640,24 +659,6 @@ EXPORT_SYMBOL(mmc_resume_host);#endif -static struct workqueue_struct *workqueue; - -/* -* Internal function. Schedule delayed work in the MMC work queue. -*/ -int mmc_schedule_delayed_work (struct delayed_work *work,unsigned long delay) -{ -return queue_delayed_work (workqueue, work, delay); -} - -/* -* Internal function. Flush all scheduled work from the MMC work queue. -*/ -void mmc_flush_scheduled_work (void ) -{ -flush_workqueue (workqueue); -} -static int __init mmc_init (void ) {int ret;
drivers/mmc/core/host.c renamed from drivers/mmc/core/host.c.old +0 -4
@@ -23,10 +23,6 @@#define cls_dev_to_mmc_host (d) container_of(d, struct mmc_host, class_dev) -extern void mmc_rescan (struct work_struct *work); -extern void mmc_start_host (struct mmc_host *host); -extern void mmc_stop_host (struct mmc_host *host); -static void mmc_host_classdev_release (struct device *dev) {struct mmc_host *host =cls_dev_to_mmc_host (dev);
Pierre Ossman
AppliedRe: [-mm patch] drivers/mmc/core/core.{h,c}: cleanups
Quoted 11 lines · Adrian Bunk
This patch contains the following cleanups:
- make the following needlessly global functions static:
-core.c:mmc_schedule_delayed_work()
-core.c:mmc_flush_scheduled_work()
- removes the prototope of the following non-existing function:
-core.h:mmc_schedule_work()
- proper prototypes for three functions fromcore.cincore.hSigned-off-by Adrian Bunk <[email protected]>
Thanks, applied.
Signature · 5 lines
-- Pierre Ossman Linux kernel, MMC maintainer http://www.kernel.org PulseAudio, core developer http://pulseaudio.org rdesktop, core developer http://www.rdesktop.org
hm, mm1 hangs during bootup on one of my boxes:
Calling initcall 0xc0628d39: pci_mmcfg_late_insert_resources+0x0/0x44() initcall 0xc0628d39: pci_mmcfg_late_insert_resources+0x0/0x44() returned 0. initcall 0xc0628d39 ran for 0 msecs:
pci_mmcfg_late_insert_resources+0x0/0x44() Calling initcall 0xc062abd1: tcp_congestion_default+0x0/0xf() initcall 0xc062abd1: tcp_congestion_default+0x0/0xf() returned 0. initcall 0xc062abd1 ran for 0 msecs: tcp_congestion_default+0x0/0xf()
it usually hangs in different places. Full bootlog below. Same kernel bzImage boots fine on another box.
the NMI watchdog warning is a bit weird:
Calling initcall 0xc0613e4f: check_nmi_watchdog+0x0/0x1a8() Testing NMI watchdog ... CPU#0: NMI appears to be stuck (0->0)! CPU#1: NMI appears to be stuck (0->0)!
initcall 0xc0613e4f: check_nmi_watchdog+0x0/0x1a8() returned -1. initcall 0xc0613e4f ran for 27 msecs: check_nmi_watchdog+0x0/0x1a8()
i'll test it in a minute with that turned off.
Ingo
------------>
Linux version 2.6.22-rc3-mm1-v16-rc2 (mingo@dione) (gcc version 4.0.2) #9 SMP Tue Jun 5 10:48:06 CEST 2007 BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
using polling idle threads.
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f5680
Entering add_active_range(0, 0, 262128) 0 entries of 256 used
sizeof(struct page) = 32
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 262128
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 262128
On node 0 totalpages: 262128
Node 0 memmap at 0xc1000000 size 8388608 first pfn 0xc1000000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 255 pages used for memmap
HighMem zone: 32497 pages, LIFO batch:7
Movable zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F76F0, 0014 (r0 Nvidia)
ACPI: RSDT 3FFF3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
ACPI: FACP 3FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
ACPI: DSDT 3FFF3180, 6264 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)
ACPI: FACS 3FFF0000, 0040
ACPI: SRAT 3FFF9500, 00A0 (r1 AMD HAMMER 1 AMD 1)
ACPI: MCFG 3FFF9600, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
ACPI: APIC 3FFF9440, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:3 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:3 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260081
Kernel command line: root=/dev/sda1 console=tty earlyprintk=serial,ttyS0,115200,keep 3 debug idle=poll profile=0 initcall_debug maxcpus=2 selinux=1 enforcing=0 apic=verbose ignore_loglevel nmi_watchdog=2 kernel profiling enabled (shift: 0)
debug: ignoring loglevel setting.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c065b000 soft=c0663000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2160.234 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1018420k/1048512k available (3370k kernel code, 29424k reserved, 1735k data, 332k init, 131008k highmem)
virtual kernel memory layout:
fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0603000 - 0xc0656000 ( 332 kB)
.data : 0xc044aafa - 0xc05fc91c (1735 kB)
.text : 0xc0100000 - 0xc044aafa (3370 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4321.76 BogoMIPS (lpj=2160883)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capabilityCapability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(2) -> Core 0
CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 980 Objects with 86 Devices 310 Methods 37 Regions
tbxface-0587 [02] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [02] enable : Transition to ACPI mode successful
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
enabled ExtINT on CPU#0
Booting processor 1/1 eip 2000
CPU 1 irqstacks, hard=c065c000 soft=c0664000
Initializing CPU#1
masked ExtINT on CPU#1
Calibrating delay using timer specific routine.. 4319.79 BogoMIPS (lpj=2159898)
CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1(2) -> Core 1
CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
Total of 2 processors activated (8641.56 BogoMIPS).
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
... lapic delta = 1349919
... PM timer delta = 357899
... PM timer result ok
..... delta 1349919
..... mult: 57987393
..... calibration result: 215987
..... CPU clock speed is 2159.0869 MHz.
..... host bus clock speed is 215.0987 MHz.
Brought up 2 CPUs
Calling initcall 0xc0626528: init_cpufreq_transition_notifier_list+0x0/0x11()
initcall 0xc0626528: init_cpufreq_transition_notifier_list+0x0/0x11() returned 0.
initcall 0xc0626528 ran for 0 msecs: init_cpufreq_transition_notifier_list+0x0/0x11()
Calling initcall 0xc060ab73: cpufreq_tsc+0x0/0x11()
initcall 0xc060ab73: cpufreq_tsc+0x0/0x11() returned 0.
initcall 0xc060ab73 ran for 0 msecs: cpufreq_tsc+0x0/0x11()
Calling initcall 0xc060acd9: init_sched_clock+0x0/0x42()
initcall 0xc060acd9: init_sched_clock+0x0/0x42() returned 0.
initcall 0xc060acd9 ran for 0 msecs: init_sched_clock+0x0/0x42()
Calling initcall 0xc061092f: reboot_init+0x0/0x11()
initcall 0xc061092f: reboot_init+0x0/0x11() returned 0.
initcall 0xc061092f ran for 0 msecs: reboot_init+0x0/0x11()
Calling initcall 0xc061617a: print_banner+0x0/0xd()
Booting paravirtualized kernel on bare hardware
initcall 0xc061617a: print_banner+0x0/0xd() returned 0.
initcall 0xc061617a ran for 3 msecs: print_banner+0x0/0xd()
Calling initcall 0xc0617e97: sysctl_init+0x0/0x13()
initcall 0xc0617e97: sysctl_init+0x0/0x13() returned 0.
initcall 0xc0617e97 ran for 0 msecs: sysctl_init+0x0/0x13()
Calling initcall 0xc061893b: init_jiffies_clocksource+0x0/0xf()
initcall 0xc061893b: init_jiffies_clocksource+0x0/0xf() returned 0.
initcall 0xc061893b ran for 0 msecs: init_jiffies_clocksource+0x0/0xf()
Calling initcall 0xc0618c0a: pm_init+0x0/0x22()
initcall 0xc0618c0a: pm_init+0x0/0x22() returned 0.
initcall 0xc0618c0a ran for 0 msecs: pm_init+0x0/0x22()
Calling initcall 0xc0618edb: ksysfs_init+0x0/0x22()
initcall 0xc0618edb: ksysfs_init+0x0/0x22() returned 0.
initcall 0xc0618edb ran for 0 msecs: ksysfs_init+0x0/0x22()
Calling initcall 0xc061b418: filelock_init+0x0/0x37()
initcall 0xc061b418: filelock_init+0x0/0x37() returned 0.
initcall 0xc061b418 ran for 0 msecs: filelock_init+0x0/0x37()
Calling initcall 0xc061be98: init_misc_binfmt+0x0/0x33()
initcall 0xc061be98: init_misc_binfmt+0x0/0x33() returned 0.
initcall 0xc061be98 ran for 0 msecs: init_misc_binfmt+0x0/0x33()
Calling initcall 0xc061becb: init_script_binfmt+0x0/0xf()
initcall 0xc061becb: init_script_binfmt+0x0/0xf() returned 0.
initcall 0xc061becb ran for 0 msecs: init_script_binfmt+0x0/0xf()
Calling initcall 0xc061beda: init_elf_binfmt+0x0/0xf()
initcall 0xc061beda: init_elf_binfmt+0x0/0xf() returned 0.
initcall 0xc061beda ran for 0 msecs: init_elf_binfmt+0x0/0xf()
Calling initcall 0xc061cb95: securityfs_init+0x0/0x3d()
initcall 0xc061cb95: securityfs_init+0x0/0x3d() returned 0.
initcall 0xc061cb95 ran for 0 msecs: securityfs_init+0x0/0x3d()
Calling initcall 0xc061d505: random32_init+0x0/0x42()
initcall 0xc061d505: random32_init+0x0/0x42() returned 0.
initcall 0xc061d505 ran for 0 msecs: random32_init+0x0/0x42()
Calling initcall 0xc0626539: cpufreq_core_init+0x0/0x56()
initcall 0xc0626539: cpufreq_core_init+0x0/0x56() returned 0.
initcall 0xc0626539 ran for 0 msecs: cpufreq_core_init+0x0/0x56()
Calling initcall 0xc0629899: sock_init+0x0/0x5f()
initcall 0xc0629899: sock_init+0x0/0x5f() returned 0.
initcall 0xc0629899 ran for 0 msecs: sock_init+0x0/0x5f()
Calling initcall 0xc0629f72: netpoll_init+0x0/0x2f()
initcall 0xc0629f72: netpoll_init+0x0/0x2f() returned 0.
initcall 0xc0629f72 ran for 0 msecs: netpoll_init+0x0/0x2f()
Calling initcall 0xc062a21a: netlink_proto_init+0x0/0x12a()
NET: Registered protocol family 16
initcall 0xc062a21a: netlink_proto_init+0x0/0x12a() returned 0.
initcall 0xc062a21a ran for 2 msecs: netlink_proto_init+0x0/0x12a()
Calling initcall 0xc061d42d: kobject_uevent_init+0x0/0x45()
initcall 0xc061d42d: kobject_uevent_init+0x0/0x45() returned 0.
initcall 0xc061d42d ran for 0 msecs: kobject_uevent_init+0x0/0x45()
Calling initcall 0xc061d5e5: pcibus_class_init+0x0/0xf()
initcall 0xc061d5e5: pcibus_class_init+0x0/0xf() returned 0.
initcall 0xc061d5e5 ran for 0 msecs: pcibus_class_init+0x0/0xf()
Calling initcall 0xc061db0a: pci_driver_init+0x0/0xf()
initcall 0xc061db0a: pci_driver_init+0x0/0xf() returned 0.
initcall 0xc061db0a ran for 0 msecs: pci_driver_init+0x0/0xf()
Calling initcall 0xc061e0fb: backlight_class_init+0x0/0xf()
initcall 0xc061e0fb: backlight_class_init+0x0/0xf() returned 0.
initcall 0xc061e0fb ran for 0 msecs: backlight_class_init+0x0/0xf()
Calling initcall 0xc0620f16: tty_class_init+0x0/0x23()
initcall 0xc0620f16: tty_class_init+0x0/0x23() returned 0.
initcall 0xc0620f16 ran for 0 msecs: tty_class_init+0x0/0x23()
Calling initcall 0xc0621598: vtconsole_class_init+0x0/0xb5()
initcall 0xc0621598: vtconsole_class_init+0x0/0xb5() returned 0.
initcall 0xc0621598 ran for 0 msecs: vtconsole_class_init+0x0/0xb5()
Calling initcall 0xc0625fb2: lgend_pushf+0x0/0x163()
initcall 0xc0625fb2: lgend_pushf+0x0/0x163() returned 0.
initcall 0xc0625fb2 ran for 0 msecs: lgend_pushf+0x0/0x163()
Calling initcall 0xc060aaf7: init_pit_clocksource+0x0/0x65()
initcall 0xc060aaf7: init_pit_clocksource+0x0/0x65() returned 0.
initcall 0xc060aaf7 ran for 0 msecs: init_pit_clocksource+0x0/0x65()
Calling initcall 0xc060e115: mtrr_if_init+0x0/0x57()
initcall 0xc060e115: mtrr_if_init+0x0/0x57() returned 0.
initcall 0xc060e115 ran for 0 msecs: mtrr_if_init+0x0/0x57()
Calling initcall 0xc061081f: ffh_cstate_init+0x0/0x2c()
initcall 0xc061081f: ffh_cstate_init+0x0/0x2c() returned -1.
initcall 0xc061081f ran for 0 msecs: ffh_cstate_init+0x0/0x2c()
initcall at 0xc061081f: ffh_cstate_init+0x0/0x2c(): returned with error code -1
Calling initcall 0xc061dc50: acpi_pci_init+0x0/0x3f()
ACPI: bus type pci registered
initcall 0xc061dc50: acpi_pci_init+0x0/0x3f() returned 0.
initcall 0xc061dc50 ran for 2 msecs: acpi_pci_init+0x0/0x3f()
Calling initcall 0xc061f747: init_acpi_device_notify+0x0/0x45()
initcall 0xc061f747: init_acpi_device_notify+0x0/0x45() returned 0.
initcall 0xc061f747 ran for 0 msecs: init_acpi_device_notify+0x0/0x45()
Calling initcall 0xc0626c8e: dmi_id_init+0x0/0x26c()
initcall 0xc0626c8e: dmi_id_init+0x0/0x26c() returned 0.
initcall 0xc0626c8e ran for 0 msecs: dmi_id_init+0x0/0x26c()
Calling initcall 0xc06282e7: pci_access_init+0x0/0x41()
PCI: Using MMCONFIG
PCI: No mmconfig possible on device 00:18
initcall 0xc06282e7: pci_access_init+0x0/0x41() returned 0.
initcall 0xc06282e7 ran for 4 msecs: pci_access_init+0x0/0x41()
Calling initcall 0xc060a617: request_standard_resources+0x0/0x300()
Setting up standard PCI resources
initcall 0xc060a617: request_standard_resources+0x0/0x300() returned 0.
initcall 0xc060a617 ran for 5 msecs: request_standard_resources+0x0/0x300()
Calling initcall 0xc060a934: topology_init+0x0/0x2f()
initcall 0xc060a934: topology_init+0x0/0x2f() returned 0.
initcall 0xc060a934 ran for 0 msecs: topology_init+0x0/0x2f()
Calling initcall 0xc060de9d: mtrr_init_finialize+0x0/0x2c()
initcall 0xc060de9d: mtrr_init_finialize+0x0/0x2c() returned 0.
initcall 0xc060de9d ran for 0 msecs: mtrr_init_finialize+0x0/0x2c()
Calling initcall 0xc0618386: param_sysfs_init+0x0/0x17f()
initcall 0xc0618386: param_sysfs_init+0x0/0x17f() returned 0.
initcall 0xc0618386 ran for 1 msecs: param_sysfs_init+0x0/0x17f()
Calling initcall 0xc0140499: pm_sysrq_init+0x0/0x17()
initcall 0xc0140499: pm_sysrq_init+0x0/0x17() returned 0.
initcall 0xc0140499 ran for 0 msecs: pm_sysrq_init+0x0/0x17()
Calling initcall 0xc061ba84: init_bio+0x0/0xc7()
initcall 0xc061ba84: init_bio+0x0/0xc7() returned 0.
initcall 0xc061ba84 ran for 0 msecs: init_bio+0x0/0xc7()
Calling initcall 0xc061d1b4: genhd_device_init+0x0/0x50()
initcall 0xc061d1b4: genhd_device_init+0x0/0x50() returned 0.
initcall 0xc061d1b4 ran for 0 msecs: genhd_device_init+0x0/0x50()
Calling initcall 0xc061dc8f: fbmem_init+0x0/0x87()
initcall 0xc061dc8f: fbmem_init+0x0/0x87() returned 0.
initcall 0xc061dc8f ran for 0 msecs: fbmem_init+0x0/0x87()
Calling initcall 0xc061f54d: acpi_init+0x0/0x1fa()
evgpeblk-0956 [04] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-0956 [04] ev_create_gpe_block : GPE 20 to 5F [_GPE] 8 regs on int 0x9
evgpeblk-1052 [03] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 0 Runtime GPEs in this block
evgpeblk-1052 [03] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 0 Runtime GPEs in this block
Completing Region/Field/Buffer/Package initialization:..................................................................................................................................................... Initialized 37/37 Regions 9/9 Fields 35/35 Buffers 68/77 Packages (989 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:...
Executed 3 _INI methods requiring 1 _STA executions (examined 91 objects)
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
initcall 0xc061f54d: acpi_init+0x0/0x1fa() returned 0.
initcall 0xc061f54d ran for 76 msecs: acpi_init+0x0/0x1fa()
Calling initcall 0xc061f78c: acpi_scan_init+0x0/0xfc()
initcall 0xc061f78c: acpi_scan_init+0x0/0xfc() returned 0.
initcall 0xc061f78c ran for 13 msecs: acpi_scan_init+0x0/0xfc()
Calling initcall 0xc061f94b: acpi_ec_init+0x0/0x55()
initcall 0xc061f94b: acpi_ec_init+0x0/0x55() returned 0.
initcall 0xc061f94b ran for 0 msecs: acpi_ec_init+0x0/0x55()
Calling initcall 0xc061fa45: acpi_pci_root_init+0x0/0x25()
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:09.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
initcall 0xc061fa45: acpi_pci_root_init+0x0/0x25() returned 0.
initcall 0xc061fa45 ran for 96 msecs: acpi_pci_root_init+0x0/0x25()
Calling initcall 0xc061fb3e: acpi_pci_link_init+0x0/0x43()
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
initcall 0xc061fb3e: acpi_pci_link_init+0x0/0x43() returned 0.
initcall 0xc061fb3e ran for 117 msecs: acpi_pci_link_init+0x0/0x43()
Calling initcall 0xc061fc18: acpi_power_init+0x0/0x69()
initcall 0xc061fc18: acpi_power_init+0x0/0x69() returned 0.
initcall 0xc061fc18 ran for 0 msecs: acpi_power_init+0x0/0x69()
Calling initcall 0xc06206ff: acpi_system_init+0x0/0xad()
initcall 0xc06206ff: acpi_system_init+0x0/0xad() returned 0.
initcall 0xc06206ff ran for 0 msecs: acpi_system_init+0x0/0xad()
Calling initcall 0xc06207ac: acpi_event_init+0x0/0x38()
initcall 0xc06207ac: acpi_event_init+0x0/0x38() returned 0.
initcall 0xc06207ac ran for 0 msecs: acpi_event_init+0x0/0x38()
Calling initcall 0xc06207e4: acpi_debug_init+0x0/0x99()
initcall 0xc06207e4: acpi_debug_init+0x0/0x99() returned 0.
initcall 0xc06207e4 ran for 0 msecs: acpi_debug_init+0x0/0x99()
Calling initcall 0xc062087d: acpi_cm_sbs_init+0x0/0x7()
initcall 0xc062087d: acpi_cm_sbs_init+0x0/0x7() returned 0.
initcall 0xc062087d ran for 0 msecs: acpi_cm_sbs_init+0x0/0x7()
Calling initcall 0xc0620884: pnp_init+0x0/0x1c()
Linux Plug and Play Support v0.97 (c) Adam Belay
initcall 0xc0620884: pnp_init+0x0/0x1c() returned 0.
initcall 0xc0620884 ran for 0 msecs: pnp_init+0x0/0x1c()
Calling initcall 0xc0620a56: pnpacpi_init+0x0/0x87()
pnp: PnP ACPI init
ACPI: bus type pnp registered
Clocksource tsc unstable (delta = 164410318 ns)
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
initcall 0xc0620a56: pnpacpi_init+0x0/0x87() returned 0.
initcall 0xc0620a56 ran for 14 msecs: pnpacpi_init+0x0/0x87()
Calling initcall 0xc0621311: misc_init+0x0/0x79()
initcall 0xc0621311: misc_init+0x0/0x79() returned 0.
initcall 0xc0621311 ran for 0 msecs: misc_init+0x0/0x79()
Calling initcall 0xc0623b60: init_scsi+0x0/0x8f()
SCSI subsystem initialized
initcall 0xc0623b60: init_scsi+0x0/0x8f() returned 0.
initcall 0xc0623b60 ran for 1 msecs: init_scsi+0x0/0x8f()
Calling initcall 0xc0624368: ata_init+0x0/0x6c()
libata version 2.21 loaded.
initcall 0xc0624368: ata_init+0x0/0x6c() returned 0.
initcall 0xc0624368 ran for 0 msecs: ata_init+0x0/0x6c()
Calling initcall 0xc06250e2: usb_init+0x0/0x106()
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall 0xc06250e2: usb_init+0x0/0x106() returned 0.
initcall 0xc06250e2 ran for 5 msecs: usb_init+0x0/0x106()
Calling initcall 0xc0625533: serio_init+0x0/0x8d()
initcall 0xc0625533: serio_init+0x0/0x8d() returned 0.
initcall 0xc0625533 ran for 0 msecs: serio_init+0x0/0x8d()
Calling initcall 0xc062590d: input_init+0x0/0x101()
initcall 0xc062590d: input_init+0x0/0x101() returned 0.
initcall 0xc062590d ran for 0 msecs: input_init+0x0/0x101()
Calling initcall 0xc0625b7a: hwmon_init+0x0/0x34()
initcall 0xc0625b7a: hwmon_init+0x0/0x34() returned 0.
initcall 0xc0625b7a ran for 0 msecs: hwmon_init+0x0/0x34()
Calling initcall 0xc0627ffb: ac97_bus_init+0x0/0xf()
initcall 0xc0627ffb: ac97_bus_init+0x0/0xf() returned 0.
initcall 0xc0627ffb ran for 0 msecs: ac97_bus_init+0x0/0xf()
Calling initcall 0xc0628e25: pci_acpi_init+0x0/0x9b()
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
number of MP IRQ sources: 16.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 00000000
....... : physical APIC id: 00 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 003 03 0 0 0 0 0 1 1 31 01 003 03 1 0 0 0 0 1 1 39 02 003 03 0 0 0 0 0 1 1 41 03 003 03 1 0 0 0 0 1 1 49 04 003 03 1 0 0 0 0 1 1 51 05 003 03 1 0 0 0 0 1 1 59 06 003 03 1 0 0 0 0 1 1 61 07 003 03 1 0 0 0 0 1 1 69 08 003 03 1 0 0 0 0 1 1 71 09 003 03 0 1 0 0 0 1 1 79 0a 003 03 1 0 0 0 0 1 1 81 0b 003 03 1 0 0 0 0 1 1 89 0c 003 03 1 0 0 0 0 1 1 91 0d 003 03 1 0 0 0 0 1 1 99 0e 003 03 0 0 0 0 0 1 1 A1 0f 003 03 0 0 0 0 0 1 1 A9 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:0
IRQ1 -> 0:1
IRQ2 -> 0:2
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
initcall 0xc0628e25: pci_acpi_init+0x0/0x9b() returned 0.
initcall 0xc0628e25 ran for 82 msecs: pci_acpi_init+0x0/0x9b()
Calling initcall 0xc0628ec0: pci_legacy_init+0x0/0x105()
initcall 0xc0628ec0: pci_legacy_init+0x0/0x105() returned 0.
initcall 0xc0628ec0 ran for 0 msecs: pci_legacy_init+0x0/0x105()
Calling initcall 0xc06293cb: pcibios_irq_init+0x0/0x452()
initcall 0xc06293cb: pcibios_irq_init+0x0/0x452() returned 0.
initcall 0xc06293cb ran for 0 msecs: pcibios_irq_init+0x0/0x452()
Calling initcall 0xc062981d: pcibios_init+0x0/0x7c()
initcall 0xc062981d: pcibios_init+0x0/0x7c() returned 0.
initcall 0xc062981d ran for 0 msecs: pcibios_init+0x0/0x7c()
Calling initcall 0xc062994e: proto_init+0x0/0x2e()
initcall 0xc062994e: proto_init+0x0/0x2e() returned 0.
initcall 0xc062994e ran for 0 msecs: proto_init+0x0/0x2e()
Calling initcall 0xc0629a9e: net_dev_init+0x0/0x1d9()
initcall 0xc0629a9e: net_dev_init+0x0/0x1d9() returned 0.
initcall 0xc0629a9e ran for 0 msecs: net_dev_init+0x0/0x1d9()
Calling initcall 0xc0629ca8: neigh_init+0x0/0x7a()
initcall 0xc0629ca8: neigh_init+0x0/0x7a() returned 0.
initcall 0xc0629ca8 ran for 0 msecs: neigh_init+0x0/0x7a()
Calling initcall 0xc0629fa1: fib_rules_init+0x0/0x55()
initcall 0xc0629fa1: fib_rules_init+0x0/0x55() returned 0.
initcall 0xc0629fa1 ran for 0 msecs: fib_rules_init+0x0/0x55()
Calling initcall 0xc062a0f2: pktsched_init+0x0/0xc9()
initcall 0xc062a0f2: pktsched_init+0x0/0xc9() returned 0.
initcall 0xc062a0f2 ran for 0 msecs: pktsched_init+0x0/0xc9()
Calling initcall 0xc062a1ca: tc_filter_init+0x0/0x50()
initcall 0xc062a1ca: tc_filter_init+0x0/0x50() returned 0.
initcall 0xc062a1ca ran for 0 msecs: tc_filter_init+0x0/0x50()
Calling initcall 0xc062a344: genl_init+0x0/0xa7()
initcall 0xc062a344: genl_init+0x0/0xa7() returned 0.
initcall 0xc062a344 ran for 0 msecs: genl_init+0x0/0xa7()
Calling initcall 0xc062b82a: wireless_nlevent_init+0x0/0x2f()
initcall 0xc062b82a: wireless_nlevent_init+0x0/0x2f() returned 0.
initcall 0xc062b82a ran for 0 msecs: wireless_nlevent_init+0x0/0x2f() Calling initcall 0xc061885a: clocksource_done_booting+0x0/0x11()
initcall 0xc061885a: clocksource_done_booting+0x0/0x11() returned 0. initcall 0xc061885a ran for 0 msecs: clocksource_done_booting+0x0/0x11() Calling initcall 0xc061b3a2: init_pipe_fs+0x0/0x3f()
initcall 0xc061b3a2: init_pipe_fs+0x0/0x3f() returned 0.
initcall 0xc061b3a2 ran for 0 msecs: init_pipe_fs+0x0/0x3f()
Calling initcall 0xc061bd1a: eventpoll_init+0x0/0x96()
initcall 0xc061bd1a: eventpoll_init+0x0/0x96() returned 0.
initcall 0xc061bd1a ran for 0 msecs: eventpoll_init+0x0/0x96()
Calling initcall 0xc061bdb0: anon_inode_init+0x0/0xe8()
initcall 0xc061bdb0: anon_inode_init+0x0/0xe8() returned 0.
initcall 0xc061bdb0 ran for 0 msecs: anon_inode_init+0x0/0xe8()
Calling initcall 0xc0620960: pnp_system_init+0x0/0xf()
pnp: 00:01: ioport range 0x4000-0x407f has been reserved
pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
pnp: 00:01: ioport range 0x4400-0x447f has been reserved
pnp: 00:01: ioport range 0x4480-0x44ff has been reserved
pnp: 00:01: ioport range 0x4800-0x487f has been reserved
pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
pnp: 00:0e: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:0f: iomem range 0xf0000-0xf3fff could not be reserved
pnp: 00:0f: iomem range 0xf4000-0xf7fff could not be reserved
pnp: 00:0f: iomem range 0xf8000-0xfbfff could not be reserved
pnp: 00:0f: iomem range 0xfc000-0xfffff could not be reserved
initcall 0xc0620960: pnp_system_init+0x0/0xf() returned 0.
initcall 0xc0620960 ran for 10 msecs: pnp_system_init+0x0/0xf()
Calling initcall 0xc0620e36: chr_dev_init+0x0/0x86()
initcall 0xc0620e36: chr_dev_init+0x0/0x86() returned 0.
initcall 0xc0620e36 ran for 0 msecs: chr_dev_init+0x0/0x86()
Calling initcall 0xc0622b1e: firmware_class_init+0x0/0x66()
initcall 0xc0622b1e: firmware_class_init+0x0/0x66() returned 0.
initcall 0xc0622b1e ran for 0 msecs: firmware_class_init+0x0/0x66()
Calling initcall 0xc062660c: cpufreq_gov_performance_init+0x0/0xf() initcall 0xc062660c: cpufreq_gov_performance_init+0x0/0xf() returned 0. initcall 0xc062660c ran for 0 msecs: cpufreq_gov_performance_init+0x0/0xf() Calling initcall 0xc062661b: cpufreq_gov_userspace_init+0x0/0x1b()
initcall 0xc062661b: cpufreq_gov_userspace_init+0x0/0x1b() returned 0. initcall 0xc062661b ran for 0 msecs: cpufreq_gov_userspace_init+0x0/0x1b() Calling initcall 0xc0626f0e: init_acpi_pm_clocksource+0x0/0x173()
initcall 0xc0626f0e<6>Time: acpi_pm clocksource has been installed. Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
: init_acpi_pm_clocksource+0x0/0x173() returned 0.
initcall 0xc0626f0e ran for 28 msecs: init_acpi_pm_clocksource+0x0/0x173() Calling initcall 0xc0628064: pcibios_assign_resources+0x0/0x92()
PCI: Bridge: 0000:00:09.0
IO window: c000-cfff
MEM window: da000000-da0fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0e.0
IO window: b000-bfff
MEM window: d8000000-d9ffffff
PREFETCH window: d0000000-d7ffffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
initcall 0xc0628064: pcibios_assign_resources+0x0/0x92() returned 0. initcall 0xc0628064 ran for 69 msecs: pcibios_assign_resources+0x0/0x92() Calling initcall 0xc062ae68: inet_init+0x0/0x2d6()
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
initcall 0xc062ae68: inet_init+0x0/0x2d6() returned 0.
initcall 0xc062ae68 ran for 39 msecs: inet_init+0x0/0x2d6()
Calling initcall 0xc0608f76: populate_rootfs+0x0/0xe4()
initcall 0xc0608f76: populate_rootfs+0x0/0xe4() returned 0.
initcall 0xc0608f76 ran for 0 msecs: populate_rootfs+0x0/0xe4()
Calling initcall 0xc0609a6f: i8259A_init_sysfs+0x0/0x1d()
initcall 0xc0609a6f: i8259A_init_sysfs+0x0/0x1d() returned 0.
initcall 0xc0609a6f ran for 0 msecs: i8259A_init_sysfs+0x0/0x1d()
Calling initcall 0xc0609b4f: sbf_init+0x0/0xd2()
initcall 0xc0609b4f: sbf_init+0x0/0xd2() returned 0.
initcall 0xc0609b4f ran for 0 msecs: sbf_init+0x0/0xd2()
Calling initcall 0xc060a917: i8237A_init_sysfs+0x0/0x1d()
initcall 0xc060a917: i8237A_init_sysfs+0x0/0x1d() returned 0.
initcall 0xc060a917 ran for 0 msecs: i8237A_init_sysfs+0x0/0x1d()
Calling initcall 0xc060dce5: cache_sysfs_init+0x0/0x43()
initcall 0xc060dce5: cache_sysfs_init+0x0/0x43() returned 0.
initcall 0xc060dce5 ran for 0 msecs: cache_sysfs_init+0x0/0x43()
Calling initcall 0xc060de25: thermal_throttle_init_device+0x0/0x78() initcall 0xc060de25: thermal_throttle_init_device+0x0/0x78() returned 0. initcall 0xc060de25 ran for 0 msecs: thermal_throttle_init_device+0x0/0x78() Calling initcall 0xc060f4cf: longrun_init+0x0/0x28()
initcall 0xc060f4cf: longrun_init+0x0/0x28() returned -19.
initcall 0xc060f4cf ran for 0 msecs: longrun_init+0x0/0x28()
Calling initcall 0xc060f80c: speedstep_init+0x0/0x1bf()
initcall 0xc060f80c: speedstep_init+0x0/0x1bf() returned -19.
initcall 0xc060f80c ran for 0 msecs: speedstep_init+0x0/0x1bf()
Calling initcall 0xc0610e97: apm_init+0x0/0x3bd()
apm: BIOS not found.
initcall 0xc0610e97: apm_init+0x0/0x3bd() returned -19.
initcall 0xc0610e97 ran for 1 msecs: apm_init+0x0/0x3bd()
Calling initcall 0xc06132d4: init_lapic_sysfs+0x0/0x28()
initcall 0xc06132d4: init_lapic_sysfs+0x0/0x28() returned 0.
initcall 0xc06132d4 ran for 0 msecs: init_lapic_sysfs+0x0/0x28()
Calling initcall 0xc06142cc: ioapic_init_sysfs+0x0/0xb6()
initcall 0xc06142cc: ioapic_init_sysfs+0x0/0xb6() returned 0.
initcall 0xc06142cc ran for 0 msecs: ioapic_init_sysfs+0x0/0xb6()
Calling initcall 0xc0615b98: serial8250_x86_com_init+0x0/0x26()
initcall 0xc0615b98: serial8250_x86_com_init+0x0/0x26() returned -19. initcall 0xc0615b98 ran for 0 msecs: serial8250_x86_com_init+0x0/0x26() Calling initcall 0xc0615ed7: hpet_register_sysfs+0x0/0x49()
initcall 0xc0615ed7: hpet_register_sysfs+0x0/0x49() returned 0.
initcall 0xc0615ed7 ran for 0 msecs: hpet_register_sysfs+0x0/0x49()
Calling initcall 0xc0616187: add_pcspkr+0x0/0x35()
initcall 0xc0616187: add_pcspkr+0x0/0x35() returned 0.
initcall 0xc0616187 ran for 0 msecs: add_pcspkr+0x0/0x35()
Calling initcall 0xc0616c5f: init_sched_debug_procfs+0x0/0x2a()
initcall 0xc0616c5f: init_sched_debug_procfs+0x0/0x2a() returned 0. initcall 0xc0616c5f ran for 0 msecs: init_sched_debug_procfs+0x0/0x2a() Calling initcall 0xc0617b2e: create_proc_profile+0x0/0x16c()
initcall 0xc0617b2e: create_proc_profile+0x0/0x16c() returned 0.
initcall 0xc0617b2e ran for 0 msecs: create_proc_profile+0x0/0x16c() Calling initcall 0xc0617da4: ioresources_init+0x0/0x39()
initcall 0xc0617da4: ioresources_init+0x0/0x39() returned 0.
initcall 0xc0617da4 ran for 0 msecs: ioresources_init+0x0/0x39()
Calling initcall 0xc061802b: uid_cache_init+0x0/0x8c()
initcall 0xc061802b: uid_cache_init+0x0/0x8c() returned 0.
initcall 0xc061802b ran for 0 msecs: uid_cache_init+0x0/0x8c()
Calling initcall 0xc0618505: init_posix_timers+0x0/0x85()
initcall 0xc0618505: init_posix_timers+0x0/0x85() returned 0.
initcall 0xc0618505 ran for 0 msecs: init_posix_timers+0x0/0x85()
Calling initcall 0xc061858a: init_posix_cpu_timers+0x0/0x51()
initcall 0xc061858a: init_posix_cpu_timers+0x0/0x51() returned 0.
initcall 0xc061858a ran for 0 msecs: init_posix_cpu_timers+0x0/0x51() Calling initcall 0xc06186cc: latency_init+0x0/0x20()
initcall 0xc06186cc: latency_init+0x0/0x20() returned 0.
initcall 0xc06186cc ran for 0 msecs: latency_init+0x0/0x20()
Calling initcall 0xc06186ec: timekeeping_init_device+0x0/0x1d()
initcall 0xc06186ec: timekeeping_init_device+0x0/0x1d() returned 0. initcall 0xc06186ec ran for 0 msecs: timekeeping_init_device+0x0/0x1d() Calling initcall 0xc061886b: init_clocksource_sysfs+0x0/0x43()
initcall 0xc061886b: init_clocksource_sysfs+0x0/0x43() returned 0.
initcall 0xc061886b ran for 0 msecs: init_clocksource_sysfs+0x0/0x43() Calling initcall 0xc061894a: init_timer_list_procfs+0x0/0x2a()
initcall 0xc061894a: init_timer_list_procfs+0x0/0x2a() returned 0.
initcall 0xc061894a ran for 0 msecs: init_timer_list_procfs+0x0/0x2a() Calling initcall 0xc06189e9: init+0x0/0x74()
initcall 0xc06189e9: init+0x0/0x74() returned 0.
initcall 0xc06189e9 ran for 0 msecs: init+0x0/0x74()
Calling initcall 0xc0618a5d: proc_dma_init+0x0/0x20()
initcall 0xc0618a5d: proc_dma_init+0x0/0x20() returned 0.
initcall 0xc0618a5d ran for 0 msecs: proc_dma_init+0x0/0x20()
Calling initcall 0xc013c40c: percpu_modinit+0x0/0x66()
initcall 0xc013c40c: percpu_modinit+0x0/0x66() returned 0.
initcall 0xc013c40c ran for 0 msecs: percpu_modinit+0x0/0x66()
Calling initcall 0xc0618be7: kallsyms_init+0x0/0x23()
initcall 0xc0618be7: kallsyms_init+0x0/0x23() returned 0.
initcall 0xc0618be7 ran for 0 msecs: kallsyms_init+0x0/0x23()
Calling initcall 0xc0618c2c: crash_notes_memory_init+0x0/0x38()
initcall 0xc0618c2c: crash_notes_memory_init+0x0/0x38() returned 0. initcall 0xc0618c2c ran for 0 msecs: crash_notes_memory_init+0x0/0x38() Calling initcall 0xc0618c64: ikconfig_init+0x0/0x3b()
initcall 0xc0618c64: ikconfig_init+0x0/0x3b() returned 0.
initcall 0xc0618c64 ran for 0 msecs: ikconfig_init+0x0/0x3b()
Calling initcall 0xc0618d11: audit_init+0x0/0x10b()
audit: initializing netlink socket (disabled)
audit(1181035938.234:1): initialized
initcall 0xc0618d11: audit_init+0x0/0x10b() returned 0.
initcall 0xc0618d11 ran for 7 msecs: audit_init+0x0/0x10b()
Calling initcall 0xc0618e91: init_kprobes+0x0/0x4a()
initcall 0xc0618e91: init_kprobes+0x0/0x4a() returned 0.
initcall 0xc0618e91 ran for 0 msecs: init_kprobes+0x0/0x4a()
Calling initcall 0xc0619076: relay_init+0x0/0x7()
initcall 0xc0619076: relay_init+0x0/0x7() returned 0.
initcall 0xc0619076 ran for 0 msecs: relay_init+0x0/0x7()
Calling initcall 0xc061907d: utsname_sysctl_init+0x0/0x11()
initcall 0xc061907d: utsname_sysctl_init+0x0/0x11() returned 0.
initcall 0xc061907d ran for 0 msecs: utsname_sysctl_init+0x0/0x11()
Calling initcall 0xc061a5ca: init_per_zone_pages_min+0x0/0x3c()
initcall 0xc061a5ca: init_per_zone_pages_min+0x0/0x3c() returned 0. initcall 0xc061a5ca ran for 0 msecs: init_per_zone_pages_min+0x0/0x3c() Calling initcall 0xc061a8a0: pdflush_init+0x0/0x16()
initcall 0xc061a8a0: pdflush_init+0x0/0x16() returned 0.
initcall 0xc061a8a0 ran for 0 msecs: pdflush_init+0x0/0x16()
Calling initcall 0xc061a8d5: kswapd_init+0x0/0x1c()
initcall 0xc061a8d5: kswapd_init+0x0/0x1c() returned 0.
initcall 0xc061a8d5 ran for 0 msecs: kswapd_init+0x0/0x1c()
Calling initcall 0xc061a8f1: setup_vmstat+0x0/0x3e()
initcall 0xc061a8f1: setup_vmstat+0x0/0x3e() returned 0.
initcall 0xc061a8f1 ran for 0 msecs: setup_vmstat+0x0/0x3e()
Calling initcall 0xc061aa51: init_emergency_pool+0x0/0x62()
highmem bounce pool size: 64 pages
initcall 0xc061aa51: init_emergency_pool+0x0/0x62() returned 0.
initcall 0xc061aa51 ran for 2 msecs: init_emergency_pool+0x0/0x62()
Calling initcall 0xc061aab3: procswaps_init+0x0/0x20()
initcall 0xc061aab3: procswaps_init+0x0/0x20() returned 0.
initcall 0xc061aab3 ran for 0 msecs: procswaps_init+0x0/0x20()
Calling initcall 0xc061aad3: kprefetchd_init+0x0/0x3f()
initcall 0xc061aad3: kprefetchd_init+0x0/0x3f() returned 0.
initcall 0xc061aad3 ran for 0 msecs: kprefetchd_init+0x0/0x3f()
Calling initcall 0xc061ab8f: hugetlb_init+0x0/0x59()
Total HugeTLB memory allocated, 0
initcall 0xc061ab8f: hugetlb_init+0x0/0x59() returned 0.
initcall 0xc061ab8f ran for 2 msecs: hugetlb_init+0x0/0x59()
Calling initcall 0xc061ac1e: init_tmpfs+0x0/0xbf()
initcall 0xc061ac1e: init_tmpfs+0x0/0xbf() returned 0.
initcall 0xc061ac1e ran for 0 msecs: init_tmpfs+0x0/0xbf()
Calling initcall 0xc061acf1: cpucache_init+0x0/0x2f()
initcall 0xc061acf1: cpucache_init+0x0/0x2f() returned 0.
initcall 0xc061acf1 ran for 0 msecs: cpucache_init+0x0/0x2f()
Calling initcall 0xc061b3e1: fasync_init+0x0/0x37()
initcall 0xc061b3e1: fasync_init+0x0/0x37() returned 0.
initcall 0xc061b3e1 ran for 0 msecs: fasync_init+0x0/0x37()
Calling initcall 0xc061b9b4: aio_setup+0x0/0x7d()
initcall 0xc061b9b4: aio_setup+0x0/0x7d() returned 0.
initcall 0xc061b9b4 ran for 0 msecs: aio_setup+0x0/0x7d()
Calling initcall 0xc061bc46: inotify_setup+0x0/0x11()
initcall 0xc061bc46: inotify_setup+0x0/0x11() returned 0.
initcall 0xc061bc46 ran for 0 msecs: inotify_setup+0x0/0x11()
Calling initcall 0xc061bc57: inotify_user_setup+0x0/0xc3()
initcall 0xc061bc57: inotify_user_setup+0x0/0xc3() returned 0.
initcall 0xc061bc57 ran for 0 msecs: inotify_user_setup+0x0/0xc3()
Calling initcall 0xc061bee9: init_mbcache+0x0/0x11()
initcall 0xc061bee9: init_mbcache+0x0/0x11() returned 0.
initcall 0xc061bee9 ran for 0 msecs: init_mbcache+0x0/0x11()
Calling initcall 0xc061befa: dquot_init+0x0/0xed()
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
initcall 0xc061befa: dquot_init+0x0/0xed() returned 0.
initcall 0xc061befa ran for 7 msecs: dquot_init+0x0/0xed()
Calling initcall 0xc061bfe7: init_v2_quota_format+0x0/0xf()
initcall 0xc061bfe7: init_v2_quota_format+0x0/0xf() returned 0.
initcall 0xc061bfe7 ran for 0 msecs: init_v2_quota_format+0x0/0xf()
Calling initcall 0xc061bff6: dnotify_init+0x0/0x37()
initcall 0xc061bff6: dnotify_init+0x0/0x37() returned 0.
initcall 0xc061bff6 ran for 0 msecs: dnotify_init+0x0/0x37()
Calling initcall 0xc061c40a: init_devpts_fs+0x0/0x30()
initcall 0xc061c40a: init_devpts_fs+0x0/0x30() returned 0.
initcall 0xc061c40a ran for 0 msecs: init_devpts_fs+0x0/0x30()
Calling initcall 0xc061c43a: init_ext3_fs+0x0/0x6e()
initcall 0xc061c43a: init_ext3_fs+0x0/0x6e() returned 0.
initcall 0xc061c43a ran for 0 msecs: init_ext3_fs+0x0/0x6e()
Calling initcall 0xc061c568: journal_init+0x0/0xd8()
initcall 0xc061c568: journal_init+0x0/0xd8() returned 0.
initcall 0xc061c568 ran for 0 msecs: journal_init+0x0/0xd8()
Calling initcall 0xc061c640: init_ext2_fs+0x0/0x6e()
initcall 0xc061c640: init_ext2_fs+0x0/0x6e() returned 0.
initcall 0xc061c640 ran for 0 msecs: init_ext2_fs+0x0/0x6e()
Calling initcall 0xc061c6e2: init_ramfs_fs+0x0/0xf()
initcall 0xc061c6e2: init_ramfs_fs+0x0/0xf() returned 0.
initcall 0xc061c6e2 ran for 0 msecs: init_ramfs_fs+0x0/0xf()
Calling initcall 0xc061c700: init_hugetlbfs_fs+0x0/0x7d()
initcall 0xc061c700: init_hugetlbfs_fs+0x0/0x7d() returned 0.
initcall 0xc061c700 ran for 0 msecs: init_hugetlbfs_fs+0x0/0x7d()
Calling initcall 0xc061c77d: init_iso9660_fs+0x0/0x70()
initcall 0xc061c77d: init_iso9660_fs+0x0/0x70() returned 0.
initcall 0xc061c77d ran for 0 msecs: init_iso9660_fs+0x0/0x70()
Calling initcall 0xc061c84e: init_nls_cp437+0x0/0xf()
initcall 0xc061c84e: init_nls_cp437+0x0/0xf() returned 0.
initcall 0xc061c84e ran for 0 msecs: init_nls_cp437+0x0/0xf()
Calling initcall 0xc061c85d: init_nls_ascii+0x0/0xf()
initcall 0xc061c85d: init_nls_ascii+0x0/0xf() returned 0.
initcall 0xc061c85d ran for 0 msecs: init_nls_ascii+0x0/0xf()
Calling initcall 0xc061c86c: ipc_init+0x0/0x16()
initcall 0xc061c86c: ipc_init+0x0/0x16() returned 0.
initcall 0xc061c86c ran for 0 msecs: ipc_init+0x0/0x16()
Calling initcall 0xc061ca8d: ipc_sysctl_init+0x0/0x11()
initcall 0xc061ca8d: ipc_sysctl_init+0x0/0x11() returned 0.
initcall 0xc061ca8d ran for 0 msecs: ipc_sysctl_init+0x0/0x11()
Calling initcall 0xc061ca9e: init_mqueue_fs+0x0/0xb8()
initcall 0xc061ca9e: init_mqueue_fs+0x0/0xb8() returned 0.
initcall 0xc061ca9e ran for 0 msecs: init_mqueue_fs+0x0/0xb8()
Calling initcall 0xc061cc9e: selinux_nf_ip_init+0x0/0x57()
SELinux: Registering netfilter hooks
initcall 0xc061cc9e: selinux_nf_ip_init+0x0/0x57() returned 0.
initcall 0xc061cc9e ran for 3 msecs: selinux_nf_ip_init+0x0/0x57()
Calling initcall 0xc061ce18: init_sel_fs+0x0/0x52()
initcall 0xc061ce18: init_sel_fs+0x0/0x52() returned 0.
initcall 0xc061ce18 ran for 0 msecs: init_sel_fs+0x0/0x52()
Calling initcall 0xc061ce6a: selnl_init+0x0/0x4d()
initcall 0xc061ce6a: selnl_init+0x0/0x4d() returned 0.
initcall 0xc061ce6a ran for 0 msecs: selnl_init+0x0/0x4d()
Calling initcall 0xc061ceb7: sel_netif_init+0x0/0x6d()
initcall 0xc061ceb7: sel_netif_init+0x0/0x6d() returned 0.
initcall 0xc061ceb7 ran for 0 msecs: sel_netif_init+0x0/0x6d()
Calling initcall 0xc061cf24: aurule_init+0x0/0x46()
initcall 0xc061cf24: aurule_init+0x0/0x46() returned 0.
initcall 0xc061cf24 ran for 0 msecs: aurule_init+0x0/0x46()
Calling initcall 0xc061cfec: crypto_algapi_init+0x0/0xc()
initcall 0xc061cfec: crypto_algapi_init+0x0/0xc() returned 0.
initcall 0xc061cfec ran for 0 msecs: crypto_algapi_init+0x0/0xc()
Calling initcall 0xc061d016: cryptomgr_init+0x0/0xf()
initcall 0xc061d016: cryptomgr_init+0x0/0xf() returned 0.
initcall 0xc061d016 ran for 0 msecs: cryptomgr_init+0x0/0xf()
Calling initcall 0xc061d025: hmac_module_init+0x0/0xf()
initcall 0xc061d025: hmac_module_init+0x0/0xf() returned 0.
initcall 0xc061d025 ran for 0 msecs: hmac_module_init+0x0/0xf()
Calling initcall 0xc061d034: init+0x0/0xf()
initcall 0xc061d034: init+0x0/0xf() returned 0.
initcall 0xc061d034 ran for 0 msecs: init+0x0/0xf()
Calling initcall 0xc061d043: init+0x0/0xf()
initcall 0xc061d043: init+0x0/0xf() returned 0.
initcall 0xc061d043 ran for 0 msecs: init+0x0/0xf()
Calling initcall 0xc061d344: noop_init+0x0/0xf()
io scheduler noop registered
initcall 0xc061d344: noop_init+0x0/0xf() returned 0.
initcall 0xc061d344 ran for 2 msecs: noop_init+0x0/0xf()
Calling initcall 0xc061d353: as_init+0x0/0xf()
io scheduler anticipatory registered (default)
initcall 0xc061d353: as_init+0x0/0xf() returned 0.
initcall 0xc061d353 ran for 3 msecs: as_init+0x0/0xf()
Calling initcall 0xc061d362: deadline_init+0x0/0xf()
io scheduler deadline registered
initcall 0xc061d362: deadline_init+0x0/0xf() returned 0.
initcall 0xc061d362 ran for 2 msecs: deadline_init+0x0/0xf()
Calling initcall 0xc061d371: cfq_init+0x0/0xbc()
io scheduler cfq registered
initcall 0xc061d371: cfq_init+0x0/0xbc() returned 0.
initcall 0xc061d371 ran for 2 msecs: cfq_init+0x0/0xbc()
Calling initcall 0xc061d596: audit_classes_init+0x0/0x4f()
initcall 0xc061d596: audit_classes_init+0x0/0x4f() returned 0.
initcall 0xc061d596 ran for 0 msecs: audit_classes_init+0x0/0x4f()
Calling initcall 0xc01fb182: pci_init+0x0/0x2c()
PCI: Linking AER extended capability on 0000:00:0b.0
PCI: Linking AER extended capability on 0000:00:0c.0
PCI: Linking AER extended capability on 0000:00:0d.0
PCI: Linking AER extended capability on 0000:00:0e.0
Boot video device is 0000:01:00.0
initcall 0xc01fb182: pci_init+0x0/0x2c() returned 0.
initcall 0xc01fb182 ran for 32 msecs: pci_init+0x0/0x2c()
Calling initcall 0xc061db4e: pci_proc_init+0x0/0x5f()
initcall 0xc061db4e: pci_proc_init+0x0/0x5f() returned 0.
initcall 0xc061db4e ran for 0 msecs: pci_proc_init+0x0/0x5f()
Calling initcall 0xc061dbad: pci_hotplug_init+0x0/0x57()pci_hotplug: PCI Hot Plug PCI Core version: 0.5
initcall 0xc061dbad: pci_hotplug_init+0x0/0x57() returned 0.
initcall 0xc061dbad ran for 4 msecs: pci_hotplug_init+0x0/0x57()
Calling initcall 0xc061ddab: fb_console_init+0x0/0x10b()
initcall 0xc061ddab: fb_console_init+0x0/0x10b() returned 0.
initcall 0xc061ddab ran for 0 msecs: fb_console_init+0x0/0x10b()
Calling initcall 0xc061e7c0: vesafb_init+0x0/0x271()
initcall 0xc061e7c0: vesafb_init+0x0/0x271() returned 0.
initcall 0xc061e7c0 ran for 0 msecs: vesafb_init+0x0/0x271()
Calling initcall 0xc061ee85: acpi_reserve_resources+0x0/0xc8()
initcall 0xc061ee85: acpi_reserve_resources+0x0/0xc8() returned 0.
initcall 0xc061ee85 ran for 0 msecs: acpi_reserve_resources+0x0/0xc8() Calling initcall 0xc061f9f4: acpi_fan_init+0x0/0x51()
ACPI: Fan [FAN] (on)
initcall 0xc061f9f4: acpi_fan_init+0x0/0x51() returned 0.
initcall 0xc061f9f4 ran for 1 msecs: acpi_fan_init+0x0/0x51()
Calling initcall 0xc061fb0b: irqrouter_init_sysfs+0x0/0x33()
initcall 0xc061fb0b: irqrouter_init_sysfs+0x0/0x33() returned 0.
initcall 0xc061fb0b ran for 0 msecs: irqrouter_init_sysfs+0x0/0x33() Calling initcall 0xc061fc81: acpi_processor_init+0x0/0xa4()
initcall 0xc061fc81: acpi_processor_init+0x0/0xa4() returned 0.
initcall 0xc061fc81 ran for 0 msecs: acpi_processor_init+0x0/0xa4()
Calling initcall 0xc0620669: acpi_container_init+0x0/0x45()
initcall 0xc0620669: acpi_container_init+0x0/0x45() returned 0.
initcall 0xc0620669 ran for 5 msecs: acpi_container_init+0x0/0x45()
Calling initcall 0xc06206ae: acpi_thermal_init+0x0/0x51()
ACPI: Thermal Zone [THRM] (40 C)
initcall 0xc06206ae: acpi_thermal_init+0x0/0x51() returned 0.
initcall 0xc06206ae ran for 3 msecs: acpi_thermal_init+0x0/0x51()
Calling initcall 0xc0620eca: rand_initialize+0x0/0x25()
initcall 0xc0620eca: rand_initialize+0x0/0x25() returned 0.
initcall 0xc0620eca ran for 0 msecs: rand_initialize+0x0/0x25()
Calling initcall 0xc0620f39: tty_init+0x0/0x1c9()
initcall 0xc0620f39: tty_init+0x0/0x1c9() returned 0.
initcall 0xc0620f39 ran for 2 msecs: tty_init+0x0/0x1c9()
Calling initcall 0xc0621102: pty_init+0x0/0x20f()
initcall 0xc0621102: pty_init+0x0/0x20f() returned 0.
initcall 0xc0621102 ran for 0 msecs: pty_init+0x0/0x20f()
Calling initcall 0xc06218be: hvc_lguest_init+0x0/0xf()
initcall 0xc06218be: hvc_lguest_init+0x0/0xf() returned 0.
initcall 0xc06218be ran for 0 msecs: hvc_lguest_init+0x0/0xf()
Calling initcall 0xc06218fe: hvc_init+0x0/0xe2()
initcall 0xc06218fe: hvc_init+0x0/0xe2() returned 0.
initcall 0xc06218fe ran for 0 msecs: hvc_init+0x0/0xe2()
Calling initcall 0xc06219e0: raw_init+0x0/0xc9()
initcall 0xc06219e0: raw_init+0x0/0xc9() returned 0.
initcall 0xc06219e0 ran for 0 msecs: raw_init+0x0/0xc9()
Calling initcall 0xc0621aa9: rtc_init+0x0/0x1bf()
Real Time Clock Driver v1.12ac
initcall 0xc0621aa9: rtc_init+0x0/0x1bf() returned 0.
initcall 0xc0621aa9 ran for 2 msecs: rtc_init+0x0/0x1bf()
Calling initcall 0xc0621c68: agp_init+0x0/0x2f()
Linux agpgart interface v0.102 (c) Dave Jones
initcall 0xc0621c68: agp_init+0x0/0x2f() returned 0.
initcall 0xc0621c68 ran for 3 msecs: agp_init+0x0/0x2f()
Calling initcall 0xc0621cfb: agp_ali_init+0x0/0x24()
initcall 0xc0621cfb: agp_ali_init+0x0/0x24() returned 0.
initcall 0xc0621cfb ran for 0 msecs: agp_ali_init+0x0/0x24()
Calling initcall 0xc0621d1f: agp_ati_init+0x0/0x24()
initcall 0xc0621d1f: agp_ati_init+0x0/0x24() returned 0.
initcall 0xc0621d1f ran for 0 msecs: agp_ati_init+0x0/0x24()
Calling initcall 0xc0621d43: agp_amdk7_init+0x0/0x24()
initcall 0xc0621d43: agp_amdk7_init+0x0/0x24() returned 0.
initcall 0xc0621d43 ran for 0 msecs: agp_amdk7_init+0x0/0x24()
Calling initcall 0xc0621d67: agp_amd64_init+0x0/0xa7()
initcall 0xc0621d67: agp_amd64_init+0x0/0xa7() returned 0.
initcall 0xc0621d67 ran for 0 msecs: agp_amd64_init+0x0/0xa7()
Calling initcall 0xc0621e0e: agp_efficeon_init+0x0/0x39()
initcall 0xc0621e0e: agp_efficeon_init+0x0/0x39() returned 0.
initcall 0xc0621e0e ran for 0 msecs: agp_efficeon_init+0x0/0x39()
Calling initcall 0xc0621e47: agp_intel_init+0x0/0x31()
agpgart: suspend/resume problematic: resume with 3D/DRI active may lockup X.Org on some chipset/BIOS combos (see DEBUG_AGP_PM in intel-agp.c)
initcall 0xc0621e47: agp_intel_init+0x0/0x31() returned 0.
initcall 0xc0621e47 ran for 11 msecs: agp_intel_init+0x0/0x31()
Calling initcall 0xc0621e78: agp_nvidia_init+0x0/0x24()
initcall 0xc0621e78: agp_nvidia_init+0x0/0x24() returned 0.
initcall 0xc0621e78 ran for 0 msecs: agp_nvidia_init+0x0/0x24()
Calling initcall 0xc0621e9c: agp_sis_init+0x0/0x24()
initcall 0xc0621e9c: agp_sis_init+0x0/0x24() returned 0.
initcall 0xc0621e9c ran for 0 msecs: agp_sis_init+0x0/0x24()
Calling initcall 0xc0621ec0: agp_serverworks_init+0x0/0x24()
initcall 0xc0621ec0: agp_serverworks_init+0x0/0x24() returned 0.
initcall 0xc0621ec0 ran for 0 msecs: agp_serverworks_init+0x0/0x24() Calling initcall 0xc0621ee4: agp_via_init+0x0/0x24()
initcall 0xc0621ee4: agp_via_init+0x0/0x24() returned 0.
initcall 0xc0621ee4 ran for 0 msecs: agp_via_init+0x0/0x24()
Calling initcall 0xc0621f08: drm_core_init+0x0/0x12d()
[drm] Initialized drm 1.1.0 20060810
initcall 0xc0621f08: drm_core_init+0x0/0x12d() returned 0.
initcall 0xc0621f08 ran for 3 msecs: drm_core_init+0x0/0x12d()
Calling initcall 0xc0622035: i810_init+0x0/0x19()
initcall 0xc0622035: i810_init+0x0/0x19() returned 0.
initcall 0xc0622035 ran for 0 msecs: i810_init+0x0/0x19()
Calling initcall 0xc062204e: i915_init+0x0/0x19()
initcall 0xc062204e: i915_init+0x0/0x19() returned 0.
initcall 0xc062204e ran for 0 msecs: i915_init+0x0/0x19()
Calling initcall 0xc06223e9: serial8250_init+0x0/0x103()
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled initcall 0xc06223e9: serial8250_init+0x0/0x103() returned 0.
initcall 0xc06223e9 ran for 6 msecs: serial8250_init+0x0/0x103()
Calling initcall 0xc06224ec: serial8250_pci_init+0x0/0x16()
initcall 0xc06224ec: serial8250_pci_init+0x0/0x16() returned 0.
initcall 0xc06224ec ran for 0 msecs: serial8250_pci_init+0x0/0x16()
Calling initcall 0xc0622aeb: isa_bus_init+0x0/0x33()
initcall 0xc0622aeb: isa_bus_init+0x0/0x33() returned 0.
initcall 0xc0622aeb ran for 0 msecs: isa_bus_init+0x0/0x33()
Calling initcall 0xc0622b84: topology_sysfs_init+0x0/0x48()
initcall 0xc0622b84: topology_sysfs_init+0x0/0x48() returned 0.
initcall 0xc0622b84 ran for 0 msecs: topology_sysfs_init+0x0/0x48()
Calling initcall 0xc0622bcc: rd_init+0x0/0x18d()
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize initcall 0xc0622bcc: rd_init+0x0/0x18d() returned 0.
initcall 0xc0622bcc ran for 6 msecs: rd_init+0x0/0x18d()
Calling initcall 0xc062326a: cpqarray_init+0x0/0x23a()
Compaq SMART2 Driver (v 2.6.0)
initcall 0xc062326a: cpqarray_init+0x0/0x23a() returned 0.
initcall 0xc062326a ran for 2 msecs: cpqarray_init+0x0/0x23a()
Calling initcall 0xc06237b2: pkt_init+0x0/0x159()
initcall 0xc06237b2: pkt_init+0x0/0x159() returned 0.
initcall 0xc06237b2 ran for 0 msecs: pkt_init+0x0/0x159()
Calling initcall 0xc062390b: lguestblk_init+0x0/0xf()
initcall 0xc062390b: lguestblk_init+0x0/0xf() returned 0.
initcall 0xc062390b ran for 0 msecs: lguestblk_init+0x0/0xf()
Calling initcall 0xc062391a: e1000_init_module+0x0/0x80()
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
initcall 0xc062391a: e1000_init_module+0x0/0x80() returned 0.
initcall 0xc062391a ran for 8 msecs: e1000_init_module+0x0/0x80()
Calling initcall 0xc062399a: e100_init_module+0x0/0x5a()
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
initcall 0xc062399a: e100_init_module+0x0/0x5a() returned 0.
initcall 0xc062399a ran for 8 msecs: e100_init_module+0x0/0x5a()
Calling initcall 0xc06239f4: tg3_init+0x0/0x16()
initcall 0xc06239f4: tg3_init+0x0/0x16() returned 0.
initcall 0xc06239f4 ran for 0 msecs: tg3_init+0x0/0x16()
Calling initcall 0xc0623a0a: skge_init_module+0x0/0x16()
initcall 0xc0623a0a: skge_init_module+0x0/0x16() returned 0.
initcall 0xc0623a0a ran for 0 msecs: skge_init_module+0x0/0x16()
Calling initcall 0xc0623a61: net_olddevs_init+0x0/0x89()
initcall 0xc0623a61: net_olddevs_init+0x0/0x89() returned 0.
initcall 0xc0623a61 ran for 0 msecs: net_olddevs_init+0x0/0x89()
Calling initcall 0xc0623aea: loopback_init+0x0/0xf()
initcall 0xc0623aea: loopback_init+0x0/0xf() returned 0.
initcall 0xc0623aea ran for 0 msecs: loopback_init+0x0/0xf()
Calling initcall 0xc0623af9: init_nic+0x0/0x2c()forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:0a.0 to 64
forcedeth: using HIGHDMA
eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0
initcall 0xc0623af9: init_nic+0x0/0x2c() returned 0.
initcall 0xc0623af9 ran for 518 msecs: init_nic+0x0/0x2c()
Calling initcall 0xc0623b25: rtl8139_init_module+0x0/0x16()
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
eth1: RealTek RTL8139 at 0xf881c000, 00:c0:df:03:68:5d, IRQ 17
eth1: Identified 8139 chip type 'RTL-8139B'
initcall 0xc0623b25: rtl8139_init_module+0x0/0x16() returned 0.
initcall 0xc0623b25 ran for 23 msecs: rtl8139_init_module+0x0/0x16() Calling initcall 0xc0623b3b: rtl8169_init_module+0x0/0x16()
initcall 0xc0623b3b: rtl8169_init_module+0x0/0x16() returned 0.
initcall 0xc0623b3b ran for 0 msecs: rtl8169_init_module+0x0/0x16()
Calling initcall 0xc02bbeb3: init_netconsole+0x0/0x67()
netconsole: not configured, aborting
initcall 0xc02bbeb3: init_netconsole+0x0/0x67() returned 0.
initcall 0xc02bbeb3 ran for 3 msecs: init_netconsole+0x0/0x67()
Calling initcall 0xc0623b51: lguestnet_init+0x0/0xf()
initcall 0xc0623b51: lguestnet_init+0x0/0xf() returned 0.
initcall 0xc0623b51 ran for 0 msecs: lguestnet_init+0x0/0xf()
Calling initcall 0xc0623dbb: spi_transport_init+0x0/0x27()
initcall 0xc0623dbb: spi_transport_init+0x0/0x27() returned 0.
initcall 0xc0623dbb ran for 0 msecs: spi_transport_init+0x0/0x27()
Calling initcall 0xc0623de2: sas_transport_init+0x0/0x9f()
initcall 0xc0623de2: sas_transport_init+0x0/0x9f() returned 0.
initcall 0xc0623de2 ran for 0 msecs: sas_transport_init+0x0/0x9f()
Calling initcall 0xc0623e81: sas_class_init+0x0/0x3d()
initcall 0xc0623e81: sas_class_init+0x0/0x3d() returned 0.
initcall 0xc0623e81 ran for 0 msecs: sas_class_init+0x0/0x3d()
Calling initcall 0xc0623ebe: ahc_linux_init+0x0/0x5c()
initcall 0xc0623ebe: ahc_linux_init+0x0/0x5c() returned 0.
initcall 0xc0623ebe ran for 0 msecs: ahc_linux_init+0x0/0x5c()
Calling initcall 0xc0623f1a: ahd_linux_init+0x0/0x6e()
initcall 0xc0623f1a: ahd_linux_init+0x0/0x6e() returned 0.
initcall 0xc0623f1a ran for 0 msecs: ahd_linux_init+0x0/0x6e()
Calling initcall 0xc0623f88: aic94xx_init+0x0/0x12e()
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
initcall 0xc0623f88: aic94xx_init+0x0/0x12e() returned 0.
initcall 0xc0623f88 ran for 5 msecs: aic94xx_init+0x0/0x12e()
Calling initcall 0xc06240b6: init_sd+0x0/0xd6()
initcall 0xc06240b6: init_sd+0x0/0xd6() returned 0.
initcall 0xc06240b6 ran for 0 msecs: init_sd+0x0/0xd6()
Calling initcall 0xc062418c: init_sr+0x0/0x22()
initcall 0xc062418c: init_sr+0x0/0x22() returned 0.
initcall 0xc062418c ran for 0 msecs: init_sr+0x0/0x22()
Calling initcall 0xc06241ae: init_sg+0x0/0x12a()
initcall 0xc06241ae: init_sg+0x0/0x12a() returned 0.
initcall 0xc06241ae ran for 0 msecs: init_sg+0x0/0x12a()
Calling initcall 0xc06242d8: init_ch_module+0x0/0x90()
SCSI Media Changer driver v0.25
initcall 0xc06242d8: init_ch_module+0x0/0x90() returned 0.
initcall 0xc06242d8 ran for 2 msecs: init_ch_module+0x0/0x90()
Calling initcall 0xc06243d4: ahci_init+0x0/0x16()
initcall 0xc06243d4: ahci_init+0x0/0x16() returned 0.
initcall 0xc06243d4 ran for 0 msecs: ahci_init+0x0/0x16()
Calling initcall 0xc06243ea: k2_sata_init+0x0/0x16()
initcall 0xc06243ea: k2_sata_init+0x0/0x16() returned 0.
initcall 0xc06243ea ran for 0 msecs: k2_sata_init+0x0/0x16()
Calling initcall 0xc0624400: piix_init+0x0/0x27()
initcall 0xc0624400: piix_init+0x0/0x27() returned 0.
initcall 0xc0624400 ran for 0 msecs: piix_init+0x0/0x27()
Calling initcall 0xc0624427: pdc_ata_init+0x0/0x16()
initcall 0xc0624427: pdc_ata_init+0x0/0x16() returned 0.
initcall 0xc0624427 ran for 0 msecs: pdc_ata_init+0x0/0x16()
Calling initcall 0xc062443d: qs_ata_init+0x0/0x16()
initcall 0xc062443d: qs_ata_init+0x0/0x16() returned 0.
initcall 0xc062443d ran for 0 msecs: qs_ata_init+0x0/0x16()
Calling initcall 0xc0624453: sil_init+0x0/0x16()
initcall 0xc0624453: sil_init+0x0/0x16() returned 0.
initcall 0xc0624453 ran for 0 msecs: sil_init+0x0/0x16()
Calling initcall 0xc0624469: sil24_init+0x0/0x16()
initcall 0xc0624469: sil24_init+0x0/0x16() returned 0.
initcall 0xc0624469 ran for 0 msecs: sil24_init+0x0/0x16()
Calling initcall 0xc062447f: svia_init+0x0/0x16()
initcall 0xc062447f: svia_init+0x0/0x16() returned 0.
initcall 0xc062447f ran for 0 msecs: svia_init+0x0/0x16()
Calling initcall 0xc0624495: vsc_sata_init+0x0/0x16()
initcall 0xc0624495: vsc_sata_init+0x0/0x16() returned 0.
initcall 0xc0624495 ran for 0 msecs: vsc_sata_init+0x0/0x16()
Calling initcall 0xc06244ab: sis_init+0x0/0x16()
initcall 0xc06244ab: sis_init+0x0/0x16() returned 0.
initcall 0xc06244ab ran for 0 msecs: sis_init+0x0/0x16()
Calling initcall 0xc06244c1: pdc_sata_init+0x0/0x16()
initcall 0xc06244c1: pdc_sata_init+0x0/0x16() returned 0.
initcall 0xc06244c1 ran for 0 msecs: pdc_sata_init+0x0/0x16()
Calling initcall 0xc06244d7: nv_init+0x0/0x16()
initcall 0xc06244d7: nv_init+0x0/0x16() returned 0.
initcall 0xc06244d7 ran for 0 msecs: nv_init+0x0/0x16()
Calling initcall 0xc06244ed: uli_init+0x0/0x16()
initcall 0xc06244ed: uli_init+0x0/0x16() returned 0.
initcall 0xc06244ed ran for 0 msecs: uli_init+0x0/0x16()
Calling initcall 0xc0624503: mv_init+0x0/0x16()
initcall 0xc0624503: mv_init+0x0/0x16() returned 0.
initcall 0xc0624503 ran for 0 msecs: mv_init+0x0/0x16()
Calling initcall 0xc0624519: adma_ata_init+0x0/0x16()
initcall 0xc0624519: adma_ata_init+0x0/0x16() returned 0.
initcall 0xc0624519 ran for 0 msecs: adma_ata_init+0x0/0x16()
Calling initcall 0xc062452f: ali_init+0x0/0x16()
initcall 0xc062452f: ali_init+0x0/0x16() returned 0.
initcall 0xc062452f ran for 0 msecs: ali_init+0x0/0x16()
Calling initcall 0xc0624545: amd_init+0x0/0x16()pata_amd 0000:00:06.0: version 0.3.8
PCI: Setting latency timer of device 0000:00:06.0 to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15 ata1.00: ata_hpa_resize 1: sectors = 78177792, hpa_sectors = 78177792 ata1.00: ATA-5: MAXTOR 6L040J2, AR1.0500, max UDMA/133
ata1.00: 78177792 sectors, multi 1: LBA
ata1.01: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488 ata1.01: ATA-6: ST380011A, 3.06, max UDMA/100
ata1.01: 156301488 sectors, multi 1: LBA48
ata1.00: ata_hpa_resize 1: sectors = 78177792, hpa_sectors = 78177792 ata1.00: configured for UDMA/133
ata1.01: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488 ata1.01: configured for UDMA/100
ATA: abnormal status 0x38 on port 0x00010177
scsi 0:0:0:0: Direct-Access ATA MAXTOR 6L040J2 AR1. PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 78177792 512-byte hardware sectors (40027 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 78177792 512-byte hardware sectors (40027 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 0:0:1:0: Direct-Access ATA ST380011A 3.06 PQ: 0 ANSI: 5
sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 < sdb5 >
sd 0:0:1:0: [sdb] Attached SCSI disk
sd 0:0:1:0: Attached scsi generic sg1 type 0
initcall 0xc0624545: amd_init+0x0/0x16() returned 0.
initcall 0xc0624545 ran for 662 msecs: amd_init+0x0/0x16()
Calling initcall 0xc062455b: artop_init+0x0/0x16()
initcall 0xc062455b: artop_init+0x0/0x16() returned 0.
initcall 0xc062455b ran for 0 msecs: artop_init+0x0/0x16()
Calling initcall 0xc0624571: atiixp_init+0x0/0x16()
initcall 0xc0624571: atiixp_init+0x0/0x16() returned 0.
initcall 0xc0624571 ran for 0 msecs: atiixp_init+0x0/0x16()
Calling initcall 0xc0624587: cmd64x_init+0x0/0x16()
initcall 0xc0624587: cmd64x_init+0x0/0x16() returned 0.
initcall 0xc0624587 ran for 0 msecs: cmd64x_init+0x0/0x16()
Calling initcall 0xc062459d: cs5520_init+0x0/0x16()
initcall 0xc062459d: cs5520_init+0x0/0x16() returned 0.
initcall 0xc062459d ran for 0 msecs: cs5520_init+0x0/0x16()
Calling initcall 0xc06245b3: cs5530_init+0x0/0x16()
initcall 0xc06245b3: cs5530_init+0x0/0x16() returned 0.
initcall 0xc06245b3 ran for 0 msecs: cs5530_init+0x0/0x16()
Calling initcall 0xc06245c9: cs5535_init+0x0/0x16()
initcall 0xc06245c9: cs5535_init+0x0/0x16() returned 0.
initcall 0xc06245c9 ran for 0 msecs: cs5535_init+0x0/0x16()
Calling initcall 0xc06245df: cy82c693_init+0x0/0x16()
initcall 0xc06245df: cy82c693_init+0x0/0x16() returned 0.
initcall 0xc06245df ran for 0 msecs: cy82c693_init+0x0/0x16()
Calling initcall 0xc06245f5: efar_init+0x0/0x16()
initcall 0xc06245f5: efar_init+0x0/0x16() returned 0.
initcall 0xc06245f5 ran for 0 msecs: efar_init+0x0/0x16()
Calling initcall 0xc062460b: hpt36x_init+0x0/0x16()
initcall 0xc062460b: hpt36x_init+0x0/0x16() returned 0.
initcall 0xc062460b ran for 0 msecs: hpt36x_init+0x0/0x16()
Calling initcall 0xc0624621: hpt37x_init+0x0/0x16()
initcall 0xc0624621: hpt37x_init+0x0/0x16() returned 0.
initcall 0xc0624621 ran for 0 msecs: hpt37x_init+0x0/0x16()
Calling initcall 0xc0624637: hpt3x2n_init+0x0/0x16()
initcall 0xc0624637: hpt3x2n_init+0x0/0x16() returned 0.
initcall 0xc0624637 ran for 0 msecs: hpt3x2n_init+0x0/0x16()
Calling initcall 0xc062464d: hpt3x3_init+0x0/0x16()
initcall 0xc062464d: hpt3x3_init+0x0/0x16() returned 0.
initcall 0xc062464d ran for 0 msecs: hpt3x3_init+0x0/0x16()
Calling initcall 0xc0624663: it821x_init+0x0/0x16()
initcall 0xc0624663: it821x_init+0x0/0x16() returned 0.
initcall 0xc0624663 ran for 0 msecs: it821x_init+0x0/0x16()
Calling initcall 0xc0624679: jmicron_init+0x0/0x16()
initcall 0xc0624679: jmicron_init+0x0/0x16() returned 0.
initcall 0xc0624679 ran for 0 msecs: jmicron_init+0x0/0x16()
Calling initcall 0xc062468f: netcell_init+0x0/0x16()
initcall 0xc062468f: netcell_init+0x0/0x16() returned 0.
initcall 0xc062468f ran for 0 msecs: netcell_init+0x0/0x16()
Calling initcall 0xc06246a5: ns87410_init+0x0/0x16()
initcall 0xc06246a5: ns87410_init+0x0/0x16() returned 0.
initcall 0xc06246a5 ran for 0 msecs: ns87410_init+0x0/0x16()
Calling initcall 0xc06246bb: opti_init+0x0/0x16()
initcall 0xc06246bb: opti_init+0x0/0x16() returned 0.
initcall 0xc06246bb ran for 0 msecs: opti_init+0x0/0x16()
Calling initcall 0xc06246d1: optidma_init+0x0/0x16()
initcall 0xc06246d1: optidma_init+0x0/0x16() returned 0.
initcall 0xc06246d1 ran for 0 msecs: optidma_init+0x0/0x16()
Calling initcall 0xc06246e7: marvell_init+0x0/0x16()
initcall 0xc06246e7: marvell_init+0x0/0x16() returned 0.
initcall 0xc06246e7 ran for 0 msecs: marvell_init+0x0/0x16()
Calling initcall 0xc06246fd: mpiix_init+0x0/0x16()
initcall 0xc06246fd: mpiix_init+0x0/0x16() returned 0.
initcall 0xc06246fd ran for 0 msecs: mpiix_init+0x0/0x16()
Calling initcall 0xc0624713: oldpiix_init+0x0/0x16()
initcall 0xc0624713: oldpiix_init+0x0/0x16() returned 0.
initcall 0xc0624713 ran for 0 msecs: oldpiix_init+0x0/0x16()
Calling initcall 0xc0624729: pdc2027x_init+0x0/0x16()
initcall 0xc0624729: pdc2027x_init+0x0/0x16() returned 0.
initcall 0xc0624729 ran for 0 msecs: pdc2027x_init+0x0/0x16()
Calling initcall 0xc062473f: pdc202xx_init+0x0/0x16()
initcall 0xc062473f: pdc202xx_init+0x0/0x16() returned 0.
initcall 0xc062473f ran for 0 msecs: pdc202xx_init+0x0/0x16()
Calling initcall 0xc06248d3: qdi_init+0x0/0x233()
initcall 0xc06248d3: qdi_init+0x0/0x233() returned -19.
initcall 0xc06248d3 ran for 0 msecs: qdi_init+0x0/0x233()
Calling initcall 0xc0624b06: radisys_init+0x0/0x16()
initcall 0xc0624b06: radisys_init+0x0/0x16() returned 0.
initcall 0xc0624b06 ran for 0 msecs: radisys_init+0x0/0x16()
Calling initcall 0xc0624b1c: rz1000_init+0x0/0x16()
initcall 0xc0624b1c: rz1000_init+0x0/0x16() returned 0.
initcall 0xc0624b1c ran for 0 msecs: rz1000_init+0x0/0x16()
Calling initcall 0xc0624b32: sc1200_init+0x0/0x16()
initcall 0xc0624b32: sc1200_init+0x0/0x16() returned 0.
initcall 0xc0624b32 ran for 0 msecs: sc1200_init+0x0/0x16()
Calling initcall 0xc0624b48: serverworks_init+0x0/0x16()
initcall 0xc0624b48: serverworks_init+0x0/0x16() returned 0.
initcall 0xc0624b48 ran for 0 msecs: serverworks_init+0x0/0x16()
Calling initcall 0xc0624b5e: sil680_init+0x0/0x16()
initcall 0xc0624b5e: sil680_init+0x0/0x16() returned 0.
initcall 0xc0624b5e ran for 0 msecs: sil680_init+0x0/0x16()
Calling initcall 0xc0624b74: via_init+0x0/0x16()
initcall 0xc0624b74: via_init+0x0/0x16() returned 0.
initcall 0xc0624b74 ran for 0 msecs: via_init+0x0/0x16()
Calling initcall 0xc0624b8a: sl82c105_init+0x0/0x16()
initcall 0xc0624b8a: sl82c105_init+0x0/0x16() returned 0.
initcall 0xc0624b8a ran for 0 msecs: sl82c105_init+0x0/0x16()
Calling initcall 0xc0624ba0: winbond_init+0x0/0x27b()
initcall 0xc0624ba0: winbond_init+0x0/0x27b() returned -19.
initcall 0xc0624ba0 ran for 0 msecs: winbond_init+0x0/0x27b()
Calling initcall 0xc0624e1b: sis_init+0x0/0x16()
initcall 0xc0624e1b: sis_init+0x0/0x16() returned 0.
initcall 0xc0624e1b ran for 0 msecs: sis_init+0x0/0x16()
Calling initcall 0xc0624e31: triflex_init+0x0/0x16()
initcall 0xc0624e31: triflex_init+0x0/0x16() returned 0.
initcall 0xc0624e31 ran for 0 msecs: triflex_init+0x0/0x16()
Calling initcall 0xc0624e47: ata_generic_init+0x0/0x16()
initcall 0xc0624e47: ata_generic_init+0x0/0x16() returned 0.
initcall 0xc0624e47 ran for 0 msecs: ata_generic_init+0x0/0x16()
Calling initcall 0xc0624e5d: fusion_init+0x0/0xdd()
Fusion MPT base driver 3.04.04
Copyright (c) 1999-2007 LSI Logic Corporation
initcall 0xc0624e5d: fusion_init+0x0/0xdd() returned 0.
initcall 0xc0624e5d ran for 6 msecs: fusion_init+0x0/0xdd()
Calling initcall 0xc0624f3a: mptspi_init+0x0/0xab()
Fusion MPT SPI Host driver 3.04.04
initcall 0xc0624f3a: mptspi_init+0x0/0xab() returned 0.
initcall 0xc0624f3a ran for 3 msecs: mptspi_init+0x0/0xab()
Calling initcall 0xc0624fe5: mptctl_init+0x0/0xf1()
Fusion MPT misc device (ioctl) driver 3.04.04
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
initcall 0xc0624fe5: mptctl_init+0x0/0xf1() returned 0.
initcall 0xc0624fe5 ran for 11 msecs: mptctl_init+0x0/0xf1()
Calling initcall 0xc06250d6: cdrom_init+0x0/0xc()
initcall 0xc06250d6: cdrom_init+0x0/0xc() returned 0.
initcall 0xc06250d6 ran for 0 msecs: cdrom_init+0x0/0xc()
Calling initcall 0xc06252b3: mon_init+0x0/0xe2()
usbmon: debugfs is not available
initcall 0xc06252b3: mon_init+0x0/0xe2() returned -19.
initcall 0xc06252b3 ran for 2 msecs: mon_init+0x0/0xe2()
Calling initcall 0xc0625440: ehci_hcd_init+0x0/0x16()
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:02.1 to 64ehci_hcd 0000:00:02.1: EHCI Host Controllerehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1ehci_hcd 0000:00:02.1: irq 18, io mem 0xfeb00000ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.22-rc3-mm1-v16-rc2 ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
initcall 0xc0625440: ehci_hcd_init+0x0/0x16() returned 0.
initcall 0xc0625440 ran for 171 msecs: ehci_hcd_init+0x0/0x16()
Calling initcall 0xc0625456: ohci_hcd_mod_init+0x0/0x3e()ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:02.0 to 64ohci_hcd 0000:00:02.0: OHCI Host Controllerohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 19, io mem 0xda102000
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.22-rc3-mm1-v16-rc2 ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
initcall 0xc0625456: ohci_hcd_mod_init+0x0/0x3e() returned 0.
initcall 0xc0625456 ran for 212 msecs: ohci_hcd_mod_init+0x0/0x3e()
Calling initcall 0xc0625494: uhci_hcd_init+0x0/0x9f()
USB Universal Host Controller Interface driver v3.0
initcall 0xc0625494: uhci_hcd_init+0x0/0x9f() returned 0.
initcall 0xc0625494 ran for 4 msecs: uhci_hcd_init+0x0/0x9f()
Calling initcall 0xc06255c0: i8042_init+0x0/0x321()
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
initcall 0xc06255c0: i8042_init+0x0/0x321() returned 0.
initcall 0xc06255c0 ran for 15 msecs: i8042_init+0x0/0x321()
Calling initcall 0xc06258e1: serport_init+0x0/0x2c()
initcall 0xc06258e1: serport_init+0x0/0x2c() returned 0.
initcall 0xc06258e1 ran for 0 msecs: serport_init+0x0/0x2c()
Calling initcall 0xc0625a0e: mousedev_init+0x0/0x52()
mice: PS/2 mouse device common for all mice
initcall 0xc0625a0e: mousedev_init+0x0/0x52() returned 0.
initcall 0xc0625a0e ran for 3 msecs: mousedev_init+0x0/0x52()
Calling initcall 0xc0625a60: evdev_init+0x0/0xf()
initcall 0xc0625a60: evdev_init+0x0/0xf() returned 0.
initcall 0xc0625a60 ran for 0 msecs: evdev_init+0x0/0xf()
Calling initcall 0xc0625a6f: atkbd_init+0x0/0x16()
initcall 0xc0625a6f: atkbd_init+0x0/0x16() returned 0.
initcall 0xc0625a6f ran for 0 msecs: atkbd_init+0x0/0x16()
Calling initcall 0xc0625a85: psmouse_init+0x0/0x59()
input: AT Translated Set 2 keyboard as /class/input/input0
initcall 0xc0625a85: psmouse_init+0x0/0x59() returned 0.
initcall 0xc0625a85 ran for 15 msecs: psmouse_init+0x0/0x59()
Calling initcall 0xc0625bae: md_init+0x0/0xd8()
initcall 0xc0625bae: md_init+0x0/0xd8() returned 0.
initcall 0xc0625bae ran for 0 msecs: md_init+0x0/0xd8()
Calling initcall 0xc0626115: init+0x0/0x331()
lguest: mapped switcher at ffc00000
initcall 0xc0626115: init+0x0/0x331() returned 0.
initcall 0xc0626115 ran for 3 msecs: init+0x0/0x331()
Calling initcall 0xc062658f: cpufreq_stats_init+0x0/0x7d()
initcall 0xc062658f: cpufreq_stats_init+0x0/0x7d() returned 0.
initcall 0xc062658f ran for 0 msecs: cpufreq_stats_init+0x0/0x7d()
Calling initcall 0xc0627081: hid_init+0x0/0x7()
initcall 0xc0627081: hid_init+0x0/0x7() returned 0.
initcall 0xc0627081 ran for 0 msecs: hid_init+0x0/0x7()
Calling initcall 0xc0627088: hid_init+0x0/0x5f()
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
initcall 0xc0627088: hid_init+0x0/0x5f() returned 0.
initcall 0xc0627088 ran for 12 msecs: hid_init+0x0/0x5f()
Calling initcall 0xc06270fd: init_soundcore+0x0/0x4d()
initcall 0xc06270fd: init_soundcore+0x0/0x4d() returned 0.
initcall 0xc06270fd ran for 0 msecs: init_soundcore+0x0/0x4d()
Calling initcall 0xc0627186: alsa_sound_init+0x0/0x7e()
Advanced Linux Sound Architecture Driver Version 1.0.14rc4 (Wed May 16 09:45:46 2007 UTC). initcall 0xc0627186: alsa_sound_init+0x0/0x7e() returned 0.
initcall 0xc0627186 ran for 7 msecs: alsa_sound_init+0x0/0x7e()
Calling initcall 0xc062735e: alsa_hwdep_init+0x0/0x46()
initcall 0xc062735e: alsa_hwdep_init+0x0/0x46() returned 0.
initcall 0xc062735e ran for 0 msecs: alsa_hwdep_init+0x0/0x46()
Calling initcall 0xc06273a4: alsa_timer_init+0x0/0x140()
initcall 0xc06273a4: alsa_timer_init+0x0/0x140() returned 0.
initcall 0xc06273a4 ran for 0 msecs: alsa_timer_init+0x0/0x140()
Calling initcall 0xc06274e4: rtctimer_init+0x0/0xef()
initcall 0xc06274e4: rtctimer_init+0x0/0xef() returned 0.
initcall 0xc06274e4 ran for 0 msecs: rtctimer_init+0x0/0xef()
Calling initcall 0xc06275d3: alsa_pcm_init+0x0/0x4d()
initcall 0xc06275d3: alsa_pcm_init+0x0/0x4d() returned 0.
initcall 0xc06275d3 ran for 0 msecs: alsa_pcm_init+0x0/0x4d()
Calling initcall 0xc0627620: snd_mem_init+0x0/0x2f()
initcall 0xc0627620: snd_mem_init+0x0/0x2f() returned 0.
initcall 0xc0627620 ran for 0 msecs: snd_mem_init+0x0/0x2f()
Calling initcall 0xc062764f: alsa_rawmidi_init+0x0/0x7a()
initcall 0xc062764f: alsa_rawmidi_init+0x0/0x7a() returned 0.
initcall 0xc062764f ran for 0 msecs: alsa_rawmidi_init+0x0/0x7a()
Calling initcall 0xc06276c9: alsa_mixer_oss_init+0x0/0x30()
initcall 0xc06276c9: alsa_mixer_oss_init+0x0/0x30() returned 0.
initcall 0xc06276c9 ran for 0 msecs: alsa_mixer_oss_init+0x0/0x30()
Calling initcall 0xc06276f9: alsa_pcm_oss_init+0x0/0x84()
initcall 0xc06276f9: alsa_pcm_oss_init+0x0/0x84() returned 0.
initcall 0xc06276f9 ran for 0 msecs: alsa_pcm_oss_init+0x0/0x84()
Calling initcall 0xc062777d: alsa_seq_oss_init+0x0/0x152()
initcall 0xc062777d: alsa_seq_oss_init+0x0/0x152() returned 0.
initcall 0xc062777d ran for 0 msecs: alsa_seq_oss_init+0x0/0x152()
Calling initcall 0xc0627ac8: alsa_seq_init+0x0/0x37()
initcall 0xc0627ac8: alsa_seq_init+0x0/0x37() returned 0.
initcall 0xc0627ac8 ran for 0 msecs: alsa_seq_init+0x0/0x37()
Calling initcall 0xc0627d1a: alsa_seq_device_init+0x0/0x4e()
initcall 0xc0627d1a: alsa_seq_device_init+0x0/0x4e() returned 0.
initcall 0xc0627d1a ran for 0 msecs: alsa_seq_device_init+0x0/0x4e() Calling initcall 0xc0627d68: alsa_seq_midi_event_init+0x0/0x7()
initcall 0xc0627d68: alsa_seq_midi_event_init+0x0/0x7() returned 0. initcall 0xc0627d68 ran for 0 msecs: alsa_seq_midi_event_init+0x0/0x7() Calling initcall 0xc0627eab: alsa_seq_dummy_init+0x0/0xaa()
initcall 0xc0627eab: alsa_seq_dummy_init+0x0/0xaa() returned 0.
initcall 0xc0627eab ran for 0 msecs: alsa_seq_dummy_init+0x0/0xaa()
Calling initcall 0xc0627f55: alsa_seq_midi_init+0x0/0x28()
initcall 0xc0627f55: alsa_seq_midi_init+0x0/0x28() returned 0.
initcall 0xc0627f55 ran for 0 msecs: alsa_seq_midi_init+0x0/0x28()
Calling initcall 0xc0627f7d: alsa_seq_midi_emul_init+0x0/0x7()
initcall 0xc0627f7d: alsa_seq_midi_emul_init+0x0/0x7() returned 0.
initcall 0xc0627f7d ran for 0 msecs: alsa_seq_midi_emul_init+0x0/0x7() Calling initcall 0xc0627f84: alsa_virmidi_init+0x0/0x7()
initcall 0xc0627f84: alsa_virmidi_init+0x0/0x7() returned 0.
initcall 0xc0627f84 ran for 0 msecs: alsa_virmidi_init+0x0/0x7()
Calling initcall 0xc0627f8b: alsa_ac97_init+0x0/0x7()
initcall 0xc0627f8b: alsa_ac97_init+0x0/0x7() returned 0.
initcall 0xc0627f8b ran for 0 msecs: alsa_ac97_init+0x0/0x7()
Calling initcall 0xc0627f92: alsa_card_emu10k1_init+0x0/0x16()
initcall 0xc0627f92: alsa_card_emu10k1_init+0x0/0x16() returned 0.
initcall 0xc0627f92 ran for 0 msecs: alsa_card_emu10k1_init+0x0/0x16() Calling initcall 0xc0627fa8: alsa_emu10k1_synth_init+0x0/0x19()
initcall 0xc0627fa8: alsa_emu10k1_synth_init+0x0/0x19() returned 0. initcall 0xc0627fa8 ran for 0 msecs: alsa_emu10k1_synth_init+0x0/0x19() Calling initcall 0xc0627fc1: alsa_card_emu10k1x_init+0x0/0x16()
initcall 0xc0627fc1: alsa_card_emu10k1x_init+0x0/0x16() returned 0. initcall 0xc0627fc1 ran for 0 msecs: alsa_card_emu10k1x_init+0x0/0x16() Calling initcall 0xc0627fd7: alsa_card_azx_init+0x0/0x16()
initcall 0xc0627fd7: alsa_card_azx_init+0x0/0x16() returned 0.
initcall 0xc0627fd7 ran for 0 msecs: alsa_card_azx_init+0x0/0x16()
Calling initcall 0xc0627fed: alsa_util_mem_init+0x0/0x7()
initcall 0xc0627fed: alsa_util_mem_init+0x0/0x7() returned 0.
initcall 0xc0627fed ran for 0 msecs: alsa_util_mem_init+0x0/0x7()
Calling initcall 0xc0627ff4: alsa_emux_init+0x0/0x7()
initcall 0xc0627ff4: alsa_emux_init+0x0/0x7() returned 0.
initcall 0xc0627ff4 ran for 0 msecs: alsa_emux_init+0x0/0x7()
Calling initcall 0xc062800a: alsa_sound_last_init+0x0/0x5a()
ALSA device list:
No soundcards found.
initcall 0xc062800a: alsa_sound_last_init+0x0/0x5a() returned 0.
initcall 0xc062800a ran for 3 msecs: alsa_sound_last_init+0x0/0x5a() Calling initcall 0xc0629e1c: flow_cache_init+0x0/0x156()
initcall 0xc0629e1c: flow_cache_init+0x0/0x156() returned 0.
initcall 0xc0629e1c ran for 0 msecs: flow_cache_init+0x0/0x156()
Calling initcall 0xc0629ff6: llc_init+0x0/0x68()
initcall 0xc0629ff6: llc_init+0x0/0x68() returned 0.
initcall 0xc0629ff6 ran for 0 msecs: llc_init+0x0/0x68()
Calling initcall 0xc062a05e: snap_init+0x0/0x2c()
initcall 0xc062a05e: snap_init+0x0/0x2c() returned 0.
initcall 0xc062a05e ran for 0 msecs: snap_init+0x0/0x2c()
Calling initcall 0xc062a08a: rif_init+0x0/0x68()
initcall 0xc062a08a: rif_init+0x0/0x68() returned 0.
initcall 0xc062a08a ran for 0 msecs: rif_init+0x0/0x68()
Calling initcall 0xc062a1bb: blackhole_module_init+0x0/0xf()
initcall 0xc062a1bb: blackhole_module_init+0x0/0xf() returned 0.
initcall 0xc062a1bb ran for 0 msecs: blackhole_module_init+0x0/0xf() Calling initcall 0xc062b3e8: init_syncookies+0x0/0x16()
initcall 0xc062b3e8: init_syncookies+0x0/0x16() returned 0.
initcall 0xc062b3e8 ran for 0 msecs: init_syncookies+0x0/0x16()
Calling initcall 0xc062b3fe: xfrm4_beet_init+0x0/0x14()
initcall 0xc062b3fe: xfrm4_beet_init+0x0/0x14() returned 0.
initcall 0xc062b3fe ran for 0 msecs: xfrm4_beet_init+0x0/0x14()
Calling initcall 0xc062b412: xfrm4_transport_init+0x0/0x14()
initcall 0xc062b412: xfrm4_transport_init+0x0/0x14() returned 0.
initcall 0xc062b412 ran for 0 msecs: xfrm4_transport_init+0x0/0x14() Calling initcall 0xc062b426: xfrm4_tunnel_init+0x0/0x14()
initcall 0xc062b426: xfrm4_tunnel_init+0x0/0x14() returned 0.
initcall 0xc062b426 ran for 0 msecs: xfrm4_tunnel_init+0x0/0x14()
Calling initcall 0xc04326d8: ipv4_netfilter_init+0x0/0xf()
initcall 0xc04326d8: ipv4_netfilter_init+0x0/0xf() returned 0.
initcall 0xc04326d8 ran for 0 msecs: ipv4_netfilter_init+0x0/0xf()
Calling initcall 0xc062b43a: inet_diag_init+0x0/0x60()
initcall 0xc062b43a: inet_diag_init+0x0/0x60() returned 0.
initcall 0xc062b43a ran for 0 msecs: inet_diag_init+0x0/0x60()
Calling initcall 0xc062b49a: tcp_diag_init+0x0/0xf()
initcall 0xc062b49a: tcp_diag_init+0x0/0xf() returned 0.
initcall 0xc062b49a ran for 0 msecs: tcp_diag_init+0x0/0xf()
Calling initcall 0xc062b4a9: cubictcp_register+0x0/0x93()
TCP cubic registered
initcall 0xc062b4a9: cubictcp_register+0x0/0x93() returned 0.
initcall 0xc062b4a9 ran for 1 msecs: cubictcp_register+0x0/0x93()
Calling initcall 0xc062b6fa: xfrm_user_init+0x0/0x52()
Initializing XFRM netlink socket
initcall 0xc062b6fa: xfrm_user_init+0x0/0x52() returned 0.
initcall 0xc062b6fa ran for 2 msecs: xfrm_user_init+0x0/0x52()
Calling initcall 0xc062b74c: af_unix_init+0x0/0x64()
NET: Registered protocol family 1
initcall 0xc062b74c: af_unix_init+0x0/0x64() returned 0.
initcall 0xc062b74c ran for 2 msecs: af_unix_init+0x0/0x64()
Calling initcall 0xc062b7b0: packet_init+0x0/0x4c()
NET: Registered protocol family 17
initcall 0xc062b7b0: packet_init+0x0/0x4c() returned 0.
initcall 0xc062b7b0 ran for 2 msecs: packet_init+0x0/0x4c()
Calling initcall 0xc060e4e4: powernow_init+0x0/0x114()
initcall 0xc060e4e4: powernow_init+0x0/0x114() returned -19.
initcall 0xc060e4e4 ran for 0 msecs: powernow_init+0x0/0x114()
Calling initcall 0xc060ea62: longhaul_init+0x0/0x6b()
initcall 0xc060ea62: longhaul_init+0x0/0x6b() returned -19.
initcall 0xc060ea62 ran for 0 msecs: longhaul_init+0x0/0x6b()
Calling initcall 0xc060f9cb: acpi_cpufreq_init+0x0/0x8f()
initcall 0xc060f9cb: acpi_cpufreq_init+0x0/0x8f() returned -19.
initcall 0xc060f9cb ran for 0 msecs: acpi_cpufreq_init+0x0/0x8f()
Calling initcall 0xc060fa5a: centrino_init+0x0/0x9e()
initcall 0xc060fa5a: centrino_init+0x0/0x9e() returned -19.
initcall 0xc060fa5a ran for 0 msecs: centrino_init+0x0/0x9e()
Calling initcall 0xc061401e: init_lapic_nmi_sysfs+0x0/0x33()
initcall 0xc061401e: init_lapic_nmi_sysfs+0x0/0x33() returned 0.
initcall 0xc061401e ran for 0 msecs: init_lapic_nmi_sysfs+0x0/0x33() Calling initcall 0xc0613e4f: check_nmi_watchdog+0x0/0x1a8()
Testing NMI watchdog ... CPU#0: NMI appears to be stuck (0->0)!
CPU#1: NMI appears to be stuck (0->0)!
initcall 0xc0613e4f: check_nmi_watchdog+0x0/0x1a8() returned -1.
initcall 0xc0613e4f ran for 27 msecs: check_nmi_watchdog+0x0/0x1a8() initcall at 0xc0613e4f: check_nmi_watchdog+0x0/0x1a8(): returned with error code -1 Calling initcall 0xc06142b2: io_apic_bug_finalize+0x0/0x1a()
initcall 0xc06142b2: io_apic_bug_finalize+0x0/0x1a() returned 0.
initcall 0xc06142b2 ran for 0 msecs: io_apic_bug_finalize+0x0/0x1a() Calling initcall 0xc0616b8f: print_ipi_mode+0x0/0x2d()
Using IPI Shortcut mode
initcall 0xc0616b8f: print_ipi_mode+0x0/0x2d() returned 0.
initcall 0xc0616b8f ran for 2 msecs: print_ipi_mode+0x0/0x2d()
Calling initcall 0xc061bbc1: revokefs_init+0x0/0x85()
initcall 0xc061bbc1: revokefs_init+0x0/0x85() returned 0.
initcall 0xc061bbc1 ran for 0 msecs: revokefs_init+0x0/0x85()
Calling initcall 0xc061d547: random32_reseed+0x0/0x4f()
initcall 0xc061d547: random32_reseed+0x0/0x4f() returned 0.
initcall 0xc061d547 ran for 0 msecs: random32_reseed+0x0/0x4f()
Calling initcall 0xc061db19: pci_sysfs_init+0x0/0x35()
initcall 0xc061db19: pci_sysfs_init+0x0/0x35() returned 0.
initcall 0xc061db19 ran for 0 msecs: pci_sysfs_init+0x0/0x35()
Calling initcall 0xc023c4ad: acpi_poweroff_init+0x0/0x4f()
initcall 0xc023c4ad: acpi_poweroff_init+0x0/0x4f() returned 0.
initcall 0xc023c4ad ran for 0 msecs: acpi_poweroff_init+0x0/0x4f()
Calling initcall 0xc0620ebc: seqgen_init+0x0/0xe()
initcall 0xc0620ebc: seqgen_init+0x0/0xe() returned 0.
initcall 0xc0620ebc ran for 0 msecs: seqgen_init+0x0/0xe()
Calling initcall 0xc0622600: early_uart_console_switch+0x0/0x7d()
initcall 0xc0622600: early_uart_console_switch+0x0/0x7d() returned 0. initcall 0xc0622600 ran for 0 msecs: early_uart_console_switch+0x0/0x7d() Calling initcall 0xc02c2847: scsi_complete_async_scans+0x0/0xe2()
initcall 0xc02c2847: scsi_complete_async_scans+0x0/0xe2() returned 0. initcall 0xc02c2847 ran for 0 msecs: scsi_complete_async_scans+0x0/0xe2() Calling initcall 0xc0628d39: pci_mmcfg_late_insert_resources+0x0/0x44() initcall 0xc0628d39: pci_mmcfg_late_insert_resources+0x0/0x44() returned 0. initcall 0xc0628d39 ran for 0 msecs: pci_mmcfg_late_insert_resources+0x0/0x44() Calling initcall 0xc062abd1: tcp_congestion_default+0x0/0xf()
initcall 0xc062abd1: tcp_congestion_default+0x0/0xf() returned 0.
initcall 0xc062abd1 ran for 0 msecs: tcp_congestion_default+0x0/0xf()
Quoted 9 lines · Ingo Molnar
the NMI watchdog warning is a bit weird:
Calling initcall
0xc0613e4f: check_nmi_watchdog+0x0/0x1a8() Testing NMI watchdog ... CPU#0: NMI appears to be stuck (0->0)! CPU#1: NMI appears to be stuck (0->0)!
initcall0xc0613e4f: check_nmi_watchdog+0x0/0x1a8() returned -1. initcall0xc0613e4fran for 27 msecs: check_nmi_watchdog+0x0/0x1a8()i'll test it in a minute with that turned off.
yeah, with nmi_watchdog=0 it works fine. nmi_watchdog=2 always worked on this box so this is some new regression.
Ingo
Andrew Morton
maintainerQuoted 11 lines · On Tue, 5 Jun 2007 11:11:51 +0200 Ingo Molnar <[email protected]> wrote:
hm, mm1 hangs during bootup on one of my boxes:
Calling initcall
0xc0628d39: pci_mmcfg_late_insert_resources+0x0/0x44() initcall0xc0628d39: pci_mmcfg_late_insert_resources+0x0/0x44() returned 0. initcall0xc0628d39ran for 0 msecs:pci_mmcfg_late_insert_resources+0x0/0x44() Calling initcall 0xc062abd1: tcp_congestion_default+0x0/0xf() initcall 0xc062abd1: tcp_congestion_default+0x0/0xf() returned 0. initcall 0xc062abd1 ran for 0 msecs: tcp_congestion_default+0x0/0xf()it usually hangs in different places.
In my experience that means that it wedged in a timer tick. Often the first one.
Quoted 5 lines
Full bootlog below. Same kernel
bzImage boots fine on another box.the NMI watchdog warning is a bit weird:
Quoted 8 lines
Calling initcall
0xc0613e4f: check_nmi_watchdog+0x0/0x1a8() Testing NMI watchdog ... CPU#0: NMI appears to be stuck (0->0)! CPU#1: NMI appears to be stuck (0->0)!
initcall0xc0613e4f: check_nmi_watchdog+0x0/0x1a8() returned -1. initcall0xc0613e4fran for 27 msecs: check_nmi_watchdog+0x0/0x1a8()i'll test it in a minute with that turned off.
hm. I haven't seen any similar reports.
Quoted 12 lines · Andrew Morton
Quoted 10 lines · On Tue, 5 Jun 2007 11:11:51 +0200 Ingo Molnar <[email protected]> wrote:
hm, mm1 hangs during bootup on one of my boxes:
Calling initcall
0xc0628d39: pci_mmcfg_late_insert_resources+0x0/0x44() initcall0xc0628d39: pci_mmcfg_late_insert_resources+0x0/0x44() returned 0. initcall0xc0628d39ran for 0 msecs:pci_mmcfg_late_insert_resources+0x0/0x44() Calling initcall 0xc062abd1: tcp_congestion_default+0x0/0xf() initcall 0xc062abd1: tcp_congestion_default+0x0/0xf() returned 0. initcall 0xc062abd1 ran for 0 msecs: tcp_congestion_default+0x0/0xf()
Quoted 4 lines
Quoted 1 line
it usually hangs in different places.
In my experience that means that it wedged in a timer tick. Often the first one.
yeah. I tried !hres and !dynticks too and that doesnt make any difference to the end result - so my guess is on the NMI watchdog re-programming thing on K8 CPUs (running the 32-bit kernel), which is done in every NMI tick. check_watchdog() for some reason thought there's no NMI, and later on an NMI still arrived? Something like that.
vanilla kernel works fine.
Ingo
Quoted 6 lines · Ingo Molnar
yeah. I tried !hres and !dynticks too and that doesnt make any difference to the end result - so my guess is on the NMI watchdog re-programming thing on K8 CPUs (running the 32-bit kernel), which is done in every NMI tick.
check_watchdog()for some reason thought there's no NMI, and later on an NMI still arrived? Something like that.
i have put an early_printk() into the NMI handler but it never triggers.
Ingo
Quoted 2 lines · Ingo Molnar
i have put an
early_printk()into the NMI handler but it never triggers.
commenting out check_nmi_watchdog() produces a booting kernel too. So it's a side-effect of check_nmi_watchdog(). Problem is, nothing in nmi.c changed in -mm1 AFAICS.
Ingo
Quoted 3 lines · Ingo Molnar
commenting out
check_nmi_watchdog()produces a booting kernel too. So it's a side-effect ofcheck_nmi_watchdog(). Problem is, nothing innmi.cchanged in -mm1 AFAICS.
ah, plain -rc3 hangs too. So it's one of these commits i guess:
commit 1eeb66a1bb973534dc3d064920a5ca683823372e
commit 09198e68501a7e34737cd9264d266f42429abcdc
commit bbba11c35baaad3f70f32e185a2c1d40d7901fe9
commit bf8696ed6dfa561198b4736deaf11ab68dcc4845
Ingo
Quoted 7 lines · Ingo Molnar
Quoted 3 lines · Ingo Molnar
commenting out
check_nmi_watchdog()produces a booting kernel too. So it's a side-effect ofcheck_nmi_watchdog(). Problem is, nothing innmi.cchanged in -mm1 AFAICS.
Quoted 6 lines
ah, plain -rc3 hangs too. So it's one of these commits i guess:
commit
1eeb66a1bb973534dc3d064920a5ca683823372e
commit09198e68501a7e34737cd9264d266f42429abcdc
commitbbba11c35baaad3f70f32e185a2c1d40d7901fe9
commitbf8696ed6dfa561198b4736deaf11ab68dcc4845
oh, damn. The resulting kernel after having undone these doesnt even build ...
Ingo
Re: 2.6.22-rc3 nmi watchdog hang
Quoted 9 lines · Ingo Molnar
Quoted 6 lines
ah, plain -rc3 hangs too. So it's one of these commits i guess:
commit
1eeb66a1bb973534dc3d064920a5ca683823372e
commit09198e68501a7e34737cd9264d266f42429abcdc
commitbbba11c35baaad3f70f32e185a2c1d40d7901fe9
commitbf8696ed6dfa561198b4736deaf11ab68dcc4845oh, damn. The resulting kernel after having undone these doesnt even build ...
Andi/Linus Cc:-ed - these NMI watchdog changes came over the x86_64 tree. I suspect this patch:
commit 09198e68501a7e34737cd9264d266f42429abcdc
Author: Andi Kleen <[email protected]>
Date: Wed May 2 19:27:20 2007 +0200
[PATCH] i386: Clean up NMI watchdog code
Andi - just boot with nmi_watchdog=2 on a dual-core Athlon64 CPU.
Ingo
Re: 2.6.22-rc3 nmi watchdog hang
Quoted 16 lines · Ingo Molnar
Quoted 9 lines · Ingo Molnar
Quoted 6 lines
ah, plain -rc3 hangs too. So it's one of these commits i guess:
commit
1eeb66a1bb973534dc3d064920a5ca683823372e
commit09198e68501a7e34737cd9264d266f42429abcdc
commitbbba11c35baaad3f70f32e185a2c1d40d7901fe9
commitbf8696ed6dfa561198b4736deaf11ab68dcc4845oh, damn. The resulting kernel after having undone these doesnt even build ...
Andi/Linus Cc:-ed - these NMI watchdog changes came over the
x86_64tree. I suspect this patch:
Quoted 7 lines
commit
09198e68501a7e34737cd9264d266f42429abcdc
Author: Andi Kleen <[email protected]>
Date: Wed May 2 19:27:20 2007 +0200[PATCH] i386: Clean up NMI watchdog code
Andi - just boot with nmi_watchdog=2 on a dual-core Athlon64 CPU.
I still fail to reproduce this, could you send me your config?
Thanks,
Björn
Re: 2.6.22-rc3 nmi watchdog hang
Quoted 5 lines · Björn Steinbrink
Quoted 3 lines
[PATCH] i386: Clean up NMI watchdog code
Andi - just boot with nmi_watchdog=2 on a dual-core Athlon64 CPU.
I still fail to reproduce this, could you send me your config?
attached below. nmi_watchdog=2 still hangs as of -rc5, using the 32-bit kernel (at various places during bootup - a typical place is somewhere after cfq_init()). Changing it to nmi_watchdog=0 makes the kernel boot again.
Ingo
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.22-rc5-cfs-v17
# Mon Jun 18 14:06:22 2007
#CONFIG_X86_64=yCONFIG_64BIT=yCONFIG_X86=yCONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=yCONFIG_ZONE_DMA32=yCONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_CMPXCHG=yCONFIG_EARLY_PRINTK=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_ARCH_POPULATES_NODE_MAP=yCONFIG_DMI=yCONFIG_AUDIT_ARCH=yCONFIG_GENERIC_BUG=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#CONFIG_EXPERIMENTAL=yCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not setCONFIG_SWAP=yCONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not setCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=yCONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not setCONFIG_TASKSTATS=yCONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
# CONFIG_UTS_NS is not setCONFIG_AUDIT=yCONFIG_AUDITSYSCALL=y
# CONFIG_IKCONFIG is not setCONFIG_LOG_BUF_SHIFT=20CONFIG_CPUSETS=yCONFIG_SYSFS_DEPRECATED=yCONFIG_RELAY=yCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""CONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not setCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_KALLSYMS_EXTRA_PASS=yCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_ANON_INODES=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_VM_EVENT_COUNTERS=yCONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not setCONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not setCONFIG_BASE_SMALL=0
#
# Loadable module support
#CONFIG_MODULES=yCONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not setCONFIG_MODVERSIONS=yCONFIG_MODULE_SRCVERSION_ALL=yCONFIG_KMOD=yCONFIG_STOP_MACHINE=y
#
# Block layer
#CONFIG_BLOCK=yCONFIG_BLK_DEV_IO_TRACE=y
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not setCONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not setCONFIG_GENERIC_CPU=yCONFIG_X86_L1_CACHE_BYTES=128CONFIG_X86_L1_CACHE_SHIFT=7CONFIG_X86_INTERNODE_CACHE_BYTES=128CONFIG_X86_TSC=yCONFIG_X86_GOOD_APIC=yCONFIG_MICROCODE=mCONFIG_MICROCODE_OLD_INTERFACE=yCONFIG_X86_MSR=yCONFIG_X86_CPUID=yCONFIG_X86_HT=yCONFIG_X86_IO_APIC=yCONFIG_X86_LOCAL_APIC=yCONFIG_MTRR=yCONFIG_SMP=yCONFIG_SCHED_SMT=yCONFIG_SCHED_MC=yCONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not setCONFIG_PREEMPT_BKL=yCONFIG_NUMA=yCONFIG_K8_NUMA=yCONFIG_NODES_SHIFT=6CONFIG_X86_64_ACPI_NUMA=y
# CONFIG_NUMA_EMU is not setCONFIG_ARCH_DISCONTIGMEM_ENABLE=yCONFIG_ARCH_DISCONTIGMEM_DEFAULT=yCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not setCONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=yCONFIG_NEED_MULTIPLE_NODES=yCONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not setCONFIG_SPARSEMEM_EXTREME=y
#
# Memory hotplug is currently incompatible with Software Suspend #CONFIG_SPLIT_PTLOCK_CPUS=4CONFIG_MIGRATION=yCONFIG_RESOURCES_64BIT=yCONFIG_ZONE_DMA_FLAG=1 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=yCONFIG_NR_CPUS=255CONFIG_HOTPLUG_CPU=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_HPET_TIMER=y
# CONFIG_HPET_EMULATE_RTC is not setCONFIG_IOMMU=yCONFIG_CALGARY_IOMMU=y CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y CONFIG_SWIOTLB=yCONFIG_X86_MCE=yCONFIG_X86_MCE_INTEL=yCONFIG_X86_MCE_AMD=yCONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_START=0x200000
# CONFIG_SECCOMP is not setCONFIG_CC_STACKPROTECTOR=y CONFIG_CC_STACKPROTECTOR_ALL=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not setCONFIG_HZ_1000=yCONFIG_HZ=1000CONFIG_K8_NB=yCONFIG_GENERIC_HARDIRQS=yCONFIG_GENERIC_IRQ_PROBE=yCONFIG_ISA_DMA_API=yCONFIG_GENERIC_PENDING_IRQ=y
#
# Power management options
#CONFIG_PM=yCONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not setCONFIG_PM_SYSFS_DEPRECATED=yCONFIG_SOFTWARE_SUSPEND=yCONFIG_PM_STD_PARTITION=""CONFIG_SUSPEND_SMP=y
#
# ACPI (Advanced Configuration and Power Interface) Support #CONFIG_ACPI=yCONFIG_ACPI_SLEEP=yCONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set CONFIG_ACPI_PROCFS=yCONFIG_ACPI_AC=yCONFIG_ACPI_BATTERY=yCONFIG_ACPI_BUTTON=yCONFIG_ACPI_VIDEO=yCONFIG_ACPI_FAN=yCONFIG_ACPI_DOCK=y
# CONFIG_ACPI_BAY is not set CONFIG_ACPI_PROCESSOR=yCONFIG_ACPI_HOTPLUG_CPU=yCONFIG_ACPI_THERMAL=yCONFIG_ACPI_NUMA=yCONFIG_ACPI_ASUS=yCONFIG_ACPI_TOSHIBA=yCONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not setCONFIG_ACPI_EC=yCONFIG_ACPI_POWER=yCONFIG_ACPI_SYSTEM=yCONFIG_X86_PM_TIMER=yCONFIG_ACPI_CONTAINER=yCONFIG_ACPI_SBS=m
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_DEBUG=y CONFIG_CPU_FREQ_STAT=m CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=m CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#CONFIG_X86_POWERNOW_K8=yCONFIG_X86_POWERNOW_K8_ACPI=yCONFIG_X86_SPEEDSTEP_CENTRINO=yCONFIG_X86_ACPI_CPUFREQ=y
#
# shared options # # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set # CONFIG_X86_SPEEDSTEP_LIB is not set
#
# Bus options (PCI etc.)
#CONFIG_PCI=yCONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=yCONFIG_PCIEPORTBUS=y CONFIG_HOTPLUG_PCI_PCIE=m
# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set CONFIG_PCIEAER=yCONFIG_ARCH_SUPPORTS_MSI=yCONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set CONFIG_HT_IRQ=y
#
# PCCARD (PCMCIA/CardBus) support
#CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not setCONFIG_PCMCIA=yCONFIG_PCMCIA_LOAD_CIS=yCONFIG_PCMCIA_IOCTL=yCONFIG_CARDBUS=y
#
# PC-card bridges
#CONFIG_YENTA=yCONFIG_YENTA_O2=yCONFIG_YENTA_RICOH=yCONFIG_YENTA_TI=yCONFIG_YENTA_ENE_TUNE=yCONFIG_YENTA_TOSHIBA=yCONFIG_PD6729=mCONFIG_I82092=mCONFIG_PCCARD_NONSTATIC=yCONFIG_HOTPLUG_PCI=yCONFIG_HOTPLUG_PCI_FAKE=mCONFIG_HOTPLUG_PCI_ACPI=yCONFIG_HOTPLUG_PCI_ACPI_IBM=y
# CONFIG_HOTPLUG_PCI_CPCI is not setCONFIG_HOTPLUG_PCI_SHPC=m
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_BINFMT_MISC=yCONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not setCONFIG_COMPAT=yCONFIG_SYSVIPC_COMPAT=y
#
# Networking
#CONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=yCONFIG_PACKET_MMAP=yCONFIG_UNIX=yCONFIG_XFRM=yCONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not setCONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not setCONFIG_INET=yCONFIG_IP_MULTICAST=yCONFIG_IP_ADVANCED_ROUTER=yCONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not setCONFIG_IP_FIB_HASH=yCONFIG_IP_MULTIPLE_TABLES=yCONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not setCONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not setCONFIG_NET_IPIP=mCONFIG_NET_IPGRE=mCONFIG_NET_IPGRE_BROADCAST=yCONFIG_IP_MROUTE=yCONFIG_IP_PIMSM_V1=yCONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not setCONFIG_SYN_COOKIES=yCONFIG_INET_AH=mCONFIG_INET_ESP=mCONFIG_INET_IPCOMP=mCONFIG_INET_XFRM_TUNNEL=mCONFIG_INET_TUNNEL=mCONFIG_INET_XFRM_MODE_TRANSPORT=yCONFIG_INET_XFRM_MODE_TUNNEL=yCONFIG_INET_XFRM_MODE_BEET=yCONFIG_INET_DIAG=yCONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not setCONFIG_TCP_CONG_CUBIC=yCONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not setCONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not setCONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#CONFIG_IP_VS_PROTO_TCP=yCONFIG_IP_VS_PROTO_UDP=yCONFIG_IP_VS_PROTO_ESP=yCONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#CONFIG_IP_VS_RR=mCONFIG_IP_VS_WRR=mCONFIG_IP_VS_LC=mCONFIG_IP_VS_WLC=mCONFIG_IP_VS_LBLC=mCONFIG_IP_VS_LBLCR=mCONFIG_IP_VS_DH=mCONFIG_IP_VS_SH=mCONFIG_IP_VS_SED=mCONFIG_IP_VS_NQ=m
#
# IPVS application helper
#CONFIG_IP_VS_FTP=mCONFIG_IPV6=yCONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set CONFIG_INET6_AH=mCONFIG_INET6_ESP=mCONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=mCONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETLABEL is not set CONFIG_NETWORK_SECMARK=yCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#CONFIG_NETFILTER_NETLINK=mCONFIG_NETFILTER_NETLINK_QUEUE=mCONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NF_CONNTRACK_ENABLED is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#CONFIG_IP_NF_QUEUE=m
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set
#
# Bridge: Netfilter Configuration
#CONFIG_BRIDGE_NF_EBTABLES=mCONFIG_BRIDGE_EBT_BROUTE=mCONFIG_BRIDGE_EBT_T_FILTER=mCONFIG_BRIDGE_EBT_T_NAT=mCONFIG_BRIDGE_EBT_802_3=mCONFIG_BRIDGE_EBT_AMONG=mCONFIG_BRIDGE_EBT_ARP=mCONFIG_BRIDGE_EBT_IP=mCONFIG_BRIDGE_EBT_LIMIT=mCONFIG_BRIDGE_EBT_MARK=mCONFIG_BRIDGE_EBT_PKTTYPE=mCONFIG_BRIDGE_EBT_STP=mCONFIG_BRIDGE_EBT_VLAN=mCONFIG_BRIDGE_EBT_ARPREPLY=mCONFIG_BRIDGE_EBT_DNAT=mCONFIG_BRIDGE_EBT_MARK_T=mCONFIG_BRIDGE_EBT_REDIRECT=mCONFIG_BRIDGE_EBT_SNAT=mCONFIG_BRIDGE_EBT_LOG=mCONFIG_BRIDGE_EBT_ULOG=m
# CONFIG_IP_DCCP is not setCONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not setCONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not setCONFIG_ATM=mCONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not setCONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not setCONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not setCONFIG_BRIDGE=mCONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not setCONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#CONFIG_NET_SCHED=yCONFIG_NET_SCH_FIFO=y
#
# Queueing/Scheduling
#CONFIG_NET_SCH_CBQ=mCONFIG_NET_SCH_HTB=mCONFIG_NET_SCH_HFSC=mCONFIG_NET_SCH_ATM=mCONFIG_NET_SCH_PRIO=mCONFIG_NET_SCH_RED=mCONFIG_NET_SCH_SFQ=mCONFIG_NET_SCH_TEQL=mCONFIG_NET_SCH_TBF=mCONFIG_NET_SCH_GRED=mCONFIG_NET_SCH_DSMARK=mCONFIG_NET_SCH_NETEM=mCONFIG_NET_SCH_INGRESS=m
#
# Classification
#CONFIG_NET_CLS=yCONFIG_NET_CLS_BASIC=mCONFIG_NET_CLS_TCINDEX=mCONFIG_NET_CLS_ROUTE4=mCONFIG_NET_CLS_ROUTE=yCONFIG_NET_CLS_FW=mCONFIG_NET_CLS_U32=mCONFIG_CLS_U32_PERF=yCONFIG_CLS_U32_MARK=yCONFIG_NET_CLS_RSVP=mCONFIG_NET_CLS_RSVP6=mCONFIG_NET_EMATCH=yCONFIG_NET_EMATCH_STACK=32CONFIG_NET_EMATCH_CMP=mCONFIG_NET_EMATCH_NBYTE=mCONFIG_NET_EMATCH_U32=mCONFIG_NET_EMATCH_META=mCONFIG_NET_EMATCH_TEXT=m
# CONFIG_NET_CLS_ACT is not setCONFIG_NET_CLS_POLICE=yCONFIG_NET_CLS_IND=yCONFIG_NET_ESTIMATOR=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not setCONFIG_BT=mCONFIG_BT_L2CAP=mCONFIG_BT_SCO=mCONFIG_BT_RFCOMM=mCONFIG_BT_RFCOMM_TTY=yCONFIG_BT_BNEP=mCONFIG_BT_BNEP_MC_FILTER=yCONFIG_BT_BNEP_PROTO_FILTER=yCONFIG_BT_CMTP=mCONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#CONFIG_BT_HCIUSB=mCONFIG_BT_HCIUSB_SCO=yCONFIG_BT_HCIUART=mCONFIG_BT_HCIUART_H4=yCONFIG_BT_HCIUART_BCSP=yCONFIG_BT_HCIBCM203X=mCONFIG_BT_HCIBPA10X=mCONFIG_BT_HCIBFUSB=m
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
# CONFIG_BT_HCIBTUART is not setCONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not setCONFIG_FIB_RULES=y
#
# Wireless
#
# CONFIG_CFG80211 is not setCONFIG_WIRELESS_EXT=y
# CONFIG_MAC80211 is not setCONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not setCONFIG_IEEE80211_CRYPT_WEP=mCONFIG_IEEE80211_CRYPT_CCMP=mCONFIG_IEEE80211_CRYPT_TKIP=m
# CONFIG_IEEE80211_SOFTMAC is not set
# CONFIG_RFKILL is not set
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker #
# CONFIG_CONNECTOR is not setCONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=mCONFIG_MTD_PARTITIONS=y CONFIG_MTD_REDBOOT_PARTS=m CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
#
# User Modules And Translation Layers
#CONFIG_MTD_CHAR=mCONFIG_MTD_BLKDEVS=mCONFIG_MTD_BLOCK=mCONFIG_MTD_BLOCK_RO=mCONFIG_FTL=mCONFIG_NFTL=mCONFIG_NFTL_RW=y
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
#
# RAM/ROM/Flash chip drivers
#CONFIG_MTD_CFI=mCONFIG_MTD_JEDECPROBE=mCONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not setCONFIG_MTD_MAP_BANK_WIDTH_1=yCONFIG_MTD_MAP_BANK_WIDTH_2=yCONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not setCONFIG_MTD_CFI_I1=yCONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not setCONFIG_MTD_CFI_INTELEXT=mCONFIG_MTD_CFI_AMDSTD=mCONFIG_MTD_CFI_STAA=mCONFIG_MTD_CFI_UTIL=mCONFIG_MTD_RAM=mCONFIG_MTD_ROM=mCONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_PNC2000 is not setCONFIG_MTD_SC520CDP=mCONFIG_MTD_NETSC520=mCONFIG_MTD_TS5500=m
# CONFIG_MTD_AMD76XROM is not set
# CONFIG_MTD_ICHXROM is not set
# CONFIG_MTD_ESB2ROM is not set
# CONFIG_MTD_CK804XROM is not set
# CONFIG_MTD_SCB2_FLASH is not set
# CONFIG_MTD_NETtel is not set
# CONFIG_MTD_DILNETPC is not set
# CONFIG_MTD_L440GX is not setCONFIG_MTD_PLATRAM=m
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not setCONFIG_MTD_MTDRAM=mCONFIG_MTDRAM_TOTAL_SIZE=4096CONFIG_MTDRAM_ERASE_SIZE=128CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not setCONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not setCONFIG_MTD_NAND_IDS=m
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_CAFE is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ONENAND is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
#
# Parallel port support
#CONFIG_PARPORT=yCONFIG_PARPORT_PC=yCONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not setCONFIG_PARPORT_1284=yCONFIG_PARPORT_NOT_PC=y
#
# Plug and Play support
#CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#CONFIG_PNPACPI=y
#
# Block devices
#CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not setCONFIG_BLK_CPQ_DA=yCONFIG_BLK_CPQ_CISS_DA=mCONFIG_CISS_SCSI_TAPE=yCONFIG_BLK_DEV_DAC960=m
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=mCONFIG_BLK_DEV_CRYPTOLOOP=mCONFIG_BLK_DEV_NBD=mCONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not setCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=16384CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024CONFIG_CDROM_PKTCDVD=yCONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#CONFIG_IBM_ASM=m
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_BLINK is not set
# CONFIG_IDE is not set
#
# SCSI device support
#CONFIG_RAID_ATTRS=mCONFIG_SCSI=yCONFIG_SCSI_TGT=mCONFIG_SCSI_NETLINK=yCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=yCONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not setCONFIG_BLK_DEV_SR=yCONFIG_BLK_DEV_SR_VENDOR=yCONFIG_CHR_DEV_SG=yCONFIG_CHR_DEV_SCH=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #CONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=yCONFIG_SCSI_FC_ATTRS=mCONFIG_SCSI_ISCSI_ATTRS=mCONFIG_SCSI_SAS_ATTRS=yCONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
#
# SCSI low-level drivers
#CONFIG_ISCSI_TCP=mCONFIG_BLK_DEV_3W_XXXX_RAID=mCONFIG_SCSI_3W_9XXX=mCONFIG_SCSI_ACARD=mCONFIG_SCSI_AACRAID=mCONFIG_SCSI_AIC7XXX=yCONFIG_AIC7XXX_CMDS_PER_DEVICE=4CONFIG_AIC7XXX_RESET_DELAY_MS=1000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not setCONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not setCONFIG_SCSI_AIC7XXX_OLD=mCONFIG_SCSI_AIC79XX=yCONFIG_AIC79XX_CMDS_PER_DEVICE=4CONFIG_AIC79XX_RESET_DELAY_MS=1000
# CONFIG_AIC79XX_DEBUG_ENABLE is not setCONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not setCONFIG_SCSI_AIC94XX=y
# CONFIG_AIC94XX_DEBUG is not setCONFIG_SCSI_ARCMSR=mCONFIG_MEGARAID_NEWGEN=yCONFIG_MEGARAID_MM=mCONFIG_MEGARAID_MAILBOX=mCONFIG_MEGARAID_LEGACY=mCONFIG_MEGARAID_SAS=mCONFIG_SCSI_HPTIOP=mCONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not setCONFIG_SCSI_FUTURE_DOMAIN=mCONFIG_SCSI_GDTH=mCONFIG_SCSI_IPS=mCONFIG_SCSI_INITIO=mCONFIG_SCSI_INIA100=mCONFIG_SCSI_PPA=mCONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not setCONFIG_SCSI_STEX=mCONFIG_SCSI_SYM53C8XX_2=mCONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not setCONFIG_SCSI_QLOGIC_1280=mCONFIG_SCSI_QLA_FC=mCONFIG_SCSI_QLA_ISCSI=mCONFIG_SCSI_LPFC=m
CONFIG_SCSI_DC395x=mCONFIG_SCSI_DC390T=m
# CONFIG_SCSI_DEBUG is not setCONFIG_SCSI_SRP=m
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not setCONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not setCONFIG_ATA_ACPI=yCONFIG_SATA_AHCI=yCONFIG_SATA_SVW=yCONFIG_ATA_PIIX=yCONFIG_SATA_MV=yCONFIG_SATA_NV=yCONFIG_PDC_ADMA=yCONFIG_SATA_QSTOR=yCONFIG_SATA_PROMISE=yCONFIG_SATA_SX4=yCONFIG_SATA_SIL=yCONFIG_SATA_SIL24=yCONFIG_SATA_SIS=yCONFIG_SATA_ULI=yCONFIG_SATA_VIA=yCONFIG_SATA_VITESSE=y
# CONFIG_SATA_INIC162X is not setCONFIG_PATA_ALI=yCONFIG_PATA_AMD=yCONFIG_PATA_ARTOP=yCONFIG_PATA_ATIIXP=y
# CONFIG_PATA_CMD640_PCI is not setCONFIG_PATA_CMD64X=yCONFIG_PATA_CS5520=yCONFIG_PATA_CS5530=yCONFIG_PATA_CYPRESS=yCONFIG_PATA_EFAR=yCONFIG_ATA_GENERIC=yCONFIG_PATA_HPT366=yCONFIG_PATA_HPT37X=yCONFIG_PATA_HPT3X2N=yCONFIG_PATA_HPT3X3=yCONFIG_PATA_IT821X=y
# CONFIG_PATA_IT8213 is not setCONFIG_PATA_JMICRON=yCONFIG_PATA_TRIFLEX=yCONFIG_PATA_MARVELL=yCONFIG_PATA_MPIIX=yCONFIG_PATA_OLDPIIX=yCONFIG_PATA_NETCELL=yCONFIG_PATA_NS87410=yCONFIG_PATA_OPTI=yCONFIG_PATA_OPTIDMA=y
# CONFIG_PATA_PCMCIA is not setCONFIG_PATA_PDC_OLD=yCONFIG_PATA_RADISYS=yCONFIG_PATA_RZ1000=yCONFIG_PATA_SC1200=yCONFIG_PATA_SERVERWORKS=yCONFIG_PATA_PDC2027X=yCONFIG_PATA_SIL680=yCONFIG_PATA_SIS=yCONFIG_PATA_VIA=yCONFIG_PATA_WINBOND=y
#
# Multi-device support (RAID and LVM)
#CONFIG_MD=yCONFIG_BLK_DEV_MD=yCONFIG_MD_LINEAR=mCONFIG_MD_RAID0=mCONFIG_MD_RAID1=mCONFIG_MD_RAID10=m
# CONFIG_MD_RAID456 is not setCONFIG_MD_MULTIPATH=mCONFIG_MD_FAULTY=mCONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not setCONFIG_DM_CRYPT=mCONFIG_DM_SNAPSHOT=mCONFIG_DM_MIRROR=mCONFIG_DM_ZERO=mCONFIG_DM_MULTIPATH=mCONFIG_DM_MULTIPATH_EMC=m
# CONFIG_DM_DELAY is not set
#
# Fusion MPT device support
#CONFIG_FUSION=yCONFIG_FUSION_SPI=yCONFIG_FUSION_FC=mCONFIG_FUSION_SAS=mCONFIG_FUSION_MAX_SGE=128CONFIG_FUSION_CTL=yCONFIG_FUSION_LAN=m
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
#
# I2O device support
#CONFIG_I2O=mCONFIG_I2O_LCT_NOTIFY_ON_CHANGES=yCONFIG_I2O_EXT_ADAPTEC=yCONFIG_I2O_EXT_ADAPTEC_DMA64=yCONFIG_I2O_CONFIG=mCONFIG_I2O_CONFIG_OLD_IOCTL=yCONFIG_I2O_BUS=mCONFIG_I2O_BLOCK=mCONFIG_I2O_SCSI=mCONFIG_I2O_PROC=mCONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
#
# Network device support
#CONFIG_NETDEVICES=yCONFIG_DUMMY=mCONFIG_BONDING=m
# CONFIG_EQUALIZER is not setCONFIG_TUN=m
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#CONFIG_NET_ETHERNET=yCONFIG_MII=yCONFIG_HAPPYMEAL=mCONFIG_SUNGEM=m
# CONFIG_CASSINI is not setCONFIG_NET_VENDOR_3COM=yCONFIG_VORTEX=mCONFIG_TYPHOON=m
#
# Tulip family network device support
#CONFIG_NET_TULIP=yCONFIG_DE2104X=mCONFIG_TULIP=m
# CONFIG_TULIP_MWI is not setCONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not setCONFIG_DE4X5=mCONFIG_WINBOND_840=mCONFIG_DM9102=m
# CONFIG_ULI526X is not set
# CONFIG_PCMCIA_XIRCOM is not setCONFIG_HP100=mCONFIG_NET_PCI=yCONFIG_PCNET32=m
# CONFIG_PCNET32_NAPI is not setCONFIG_AMD8111_ETH=mCONFIG_AMD8111E_NAPI=yCONFIG_ADAPTEC_STARFIRE=mCONFIG_ADAPTEC_STARFIRE_NAPI=yCONFIG_B44=mCONFIG_FORCEDETH=yCONFIG_FORCEDETH_NAPI=y
# CONFIG_DGRS is not setCONFIG_EEPRO100=mCONFIG_E100=yCONFIG_FEALNX=mCONFIG_NATSEMI=mCONFIG_NE2K_PCI=mCONFIG_8139CP=mCONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not setCONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not setCONFIG_SIS900=mCONFIG_EPIC100=m
# CONFIG_SUNDANCE is not setCONFIG_VIA_RHINE=yCONFIG_VIA_RHINE_MMIO=y
# CONFIG_VIA_RHINE_NAPI is not set
# CONFIG_SC92031 is not setCONFIG_NET_POCKET=y
# CONFIG_ATP is not set
# CONFIG_DE600 is not set
# CONFIG_DE620 is not setCONFIG_NETDEV_1000=yCONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not setCONFIG_DL2K=mCONFIG_E1000=yCONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not setCONFIG_NS83820=m
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not setCONFIG_R8169=yCONFIG_R8169_NAPI=yCONFIG_R8169_VLAN=y
# CONFIG_SIS190 is not setCONFIG_SKGE=y
# CONFIG_SKY2 is not setCONFIG_SK98LIN=mCONFIG_VIA_VELOCITY=mCONFIG_TIGON3=yCONFIG_BNX2=m
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not setCONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not setCONFIG_IXGB=mCONFIG_IXGB_NAPI=yCONFIG_S2IO=mCONFIG_S2IO_NAPI=y
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_MLX4_CORE is not setCONFIG_TR=yCONFIG_IBMOL=mCONFIG_3C359=mCONFIG_TMS380TR=mCONFIG_TMSPCI=mCONFIG_ABYSS=m
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# USB Network Adapters
#CONFIG_USB_CATC=mCONFIG_USB_KAWETH=mCONFIG_USB_PEGASUS=mCONFIG_USB_RTL8150=mCONFIG_USB_USBNET_MII=mCONFIG_USB_USBNET=mCONFIG_USB_NET_AX8817X=mCONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_DM9601 is not setCONFIG_USB_NET_GL620A=mCONFIG_USB_NET_NET1080=mCONFIG_USB_NET_PLUSB=m
# CONFIG_USB_NET_MCS7830 is not setCONFIG_USB_NET_RNDIS_HOST=mCONFIG_USB_NET_CDC_SUBSET=mCONFIG_USB_ALI_M5632=yCONFIG_USB_AN2720=yCONFIG_USB_BELKIN=yCONFIG_USB_ARMLINUX=yCONFIG_USB_EPSON2888=y
# CONFIG_USB_KC2190 is not setCONFIG_USB_NET_ZAURUS=m
# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not setCONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not setCONFIG_ATM_TCP=mCONFIG_ATM_LANAI=mCONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not setCONFIG_ATM_FIRESTREAM=m
# CONFIG_ATM_ZATM is not setCONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not setCONFIG_ATM_IDT77252_USE_SUNI=yCONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not setCONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not setCONFIG_ATM_FORE200E_MAYBE=m
# CONFIG_ATM_FORE200E_PCA is not setCONFIG_ATM_HE=m
# CONFIG_ATM_HE_USE_SUNI is not setCONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not setCONFIG_PPP=mCONFIG_PPP_MULTILINK=yCONFIG_PPP_FILTER=yCONFIG_PPP_ASYNC=mCONFIG_PPP_SYNC_TTY=mCONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_MPPE is not setCONFIG_PPPOE=mCONFIG_PPPOATM=m
# CONFIG_SLIP is not setCONFIG_SLHC=mCONFIG_NET_FC=y
# CONFIG_SHAPER is not setCONFIG_NETCONSOLE=yCONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not setCONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#CONFIG_ISDN=m
#
# Old ISDN4Linux
#CONFIG_ISDN_I4L=mCONFIG_ISDN_PPP=yCONFIG_ISDN_PPP_VJ=yCONFIG_ISDN_MPP=yCONFIG_IPPP_FILTER=y
# CONFIG_ISDN_PPP_BSDCOMP is not setCONFIG_ISDN_AUDIO=yCONFIG_ISDN_TTY_FAX=y
#
# ISDN feature submodules
#CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#CONFIG_HISAX_EURO=yCONFIG_DE_AOC=yCONFIG_HISAX_NO_SENDCOMPLETE=yCONFIG_HISAX_NO_LLC=yCONFIG_HISAX_NO_KEYPAD=yCONFIG_HISAX_1TR6=yCONFIG_HISAX_NI1=yCONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#CONFIG_HISAX_16_3=yCONFIG_HISAX_TELESPCI=yCONFIG_HISAX_S0BOX=yCONFIG_HISAX_FRITZPCI=yCONFIG_HISAX_AVM_A1_PCMCIA=yCONFIG_HISAX_ELSA=yCONFIG_HISAX_DIEHLDIVA=yCONFIG_HISAX_SEDLBAUER=yCONFIG_HISAX_NETJET=yCONFIG_HISAX_NETJET_U=yCONFIG_HISAX_NICCY=yCONFIG_HISAX_BKM_A4T=yCONFIG_HISAX_SCT_QUADRO=yCONFIG_HISAX_GAZEL=yCONFIG_HISAX_HFC_PCI=yCONFIG_HISAX_W6692=yCONFIG_HISAX_HFC_SX=yCONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
#
# CONFIG_HISAX_SEDLBAUER_CS is not set
# CONFIG_HISAX_ELSA_CS is not set
# CONFIG_HISAX_AVM_A1_CS is not set
# CONFIG_HISAX_TELES_CS is not set
#
# HiSax sub driver modules
#CONFIG_HISAX_ST5481=mCONFIG_HISAX_HFCUSB=mCONFIG_HISAX_HFC4S8S=mCONFIG_HISAX_FRITZ_PCIPNP=mCONFIG_HISAX_HDLC=y
#
# Active cards
#
#
# Siemens Gigaset
#
# CONFIG_ISDN_DRV_GIGASET is not set
#
# CAPI subsystem
#CONFIG_ISDN_CAPI=mCONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=yCONFIG_CAPI_TRACE=yCONFIG_ISDN_CAPI_MIDDLEWARE=yCONFIG_ISDN_CAPI_CAPI20=mCONFIG_ISDN_CAPI_CAPIFS_BOOL=yCONFIG_ISDN_CAPI_CAPIFS=mCONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#
#
# Active AVM cards
#CONFIG_CAPI_AVM=yCONFIG_ISDN_DRV_AVMB1_B1PCI=mCONFIG_ISDN_DRV_AVMB1_B1PCIV4=yCONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not setCONFIG_ISDN_DRV_AVMB1_T1PCI=mCONFIG_ISDN_DRV_AVMB1_C4=m
#
# Active Eicon DIVA Server cards
#CONFIG_CAPI_EICON=yCONFIG_ISDN_DIVAS=mCONFIG_ISDN_DIVAS_BRIPCI=yCONFIG_ISDN_DIVAS_PRIPCI=yCONFIG_ISDN_DIVAS_DIVACAPI=mCONFIG_ISDN_DIVAS_USERIDI=mCONFIG_ISDN_DIVAS_MAINT=m
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not setCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not setCONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not setCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=yCONFIG_MOUSE_PS2_ALPS=yCONFIG_MOUSE_PS2_LOGIPS2PP=yCONFIG_MOUSE_PS2_SYNAPTICS=yCONFIG_MOUSE_PS2_LIFEBOOK=yCONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not setCONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_APPLETOUCH is not setCONFIG_MOUSE_VSXXXAA=mCONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not setCONFIG_JOYSTICK_TWIDJOY=m
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not setCONFIG_JOYSTICK_JOYDUMP=m
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not setCONFIG_INPUT_TOUCHSCREEN=yCONFIG_TOUCHSCREEN_GUNZE=mCONFIG_TOUCHSCREEN_ELO=mCONFIG_TOUCHSCREEN_MTOUCH=mCONFIG_TOUCHSCREEN_MK712=m
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_UCB1400 is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not setCONFIG_INPUT_MISC=yCONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not setCONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not setCONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not setCONFIG_GAMEPORT=mCONFIG_GAMEPORT_NS558=mCONFIG_GAMEPORT_L4=mCONFIG_GAMEPORT_EMU10K1=mCONFIG_GAMEPORT_FM801=m
#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not setCONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_MOXA_SMARTIO_NEW is not set
# CONFIG_ISI is not setCONFIG_SYNCLINK=mCONFIG_SYNCLINKMP=m
# CONFIG_SYNCLINK_GT is not setCONFIG_N_HDLC=m
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not setCONFIG_STALDRV=y
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_SERIAL_8250_PCI=yCONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not setCONFIG_SERIAL_8250_NR_UARTS=4CONFIG_SERIAL_8250_RUNTIME_UARTS=4CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not setCONFIG_SERIAL_8250_SHARE_IRQ=yCONFIG_SERIAL_8250_DETECT_IRQ=yCONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not setCONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not setCONFIG_PRINTER=mCONFIG_LP_CONSOLE=yCONFIG_PPDEV=m
# CONFIG_TIPAR is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not setCONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not setCONFIG_ACQUIRE_WDT=mCONFIG_ADVANTECH_WDT=mCONFIG_ALIM1535_WDT=mCONFIG_ALIM7101_WDT=mCONFIG_SC520_WDT=mCONFIG_EUROTECH_WDT=mCONFIG_IB700_WDT=mCONFIG_IBMASR=mCONFIG_WAFER_WDT=mCONFIG_I6300ESB_WDT=m
# CONFIG_ITCO_WDT is not setCONFIG_SC1200_WDT=m
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not setCONFIG_SBC8360_WDT=mCONFIG_CPU5_WDT=m
# CONFIG_SMSC37B787_WDT is not setCONFIG_W83627HF_WDT=m
# CONFIG_W83697HF_WDT is not setCONFIG_W83877F_WDT=mCONFIG_W83977F_WDT=mCONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#CONFIG_PCIPCWATCHDOG=mCONFIG_WDTPCI=mCONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#CONFIG_USBPCWATCHDOG=mCONFIG_HW_RANDOM=mCONFIG_HW_RANDOM_INTEL=mCONFIG_HW_RANDOM_AMD=mCONFIG_HW_RANDOM_GEODE=mCONFIG_NVRAM=mCONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not setCONFIG_AGP=yCONFIG_AGP_AMD64=yCONFIG_AGP_INTEL=yCONFIG_AGP_SIS=yCONFIG_AGP_VIA=yCONFIG_DRM=y
# CONFIG_DRM_TDFX is not setCONFIG_DRM_R128=mCONFIG_DRM_RADEON=yCONFIG_DRM_I810=y
# CONFIG_DRM_I830 is not setCONFIG_DRM_I915=yCONFIG_DRM_MGA=m
# CONFIG_DRM_SIS is not setCONFIG_DRM_VIA=mCONFIG_DRM_SAVAGE=m
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not setCONFIG_RAW_DRIVER=yCONFIG_MAX_RAW_DEVS=8192CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not setCONFIG_HPET_MMAP=yCONFIG_HANGCHECK_TIMER=m
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not setCONFIG_DEVPORT=yCONFIG_I2C=mCONFIG_I2C_BOARDINFO=yCONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#CONFIG_I2C_ALGOBIT=mCONFIG_I2C_ALGOPCF=mCONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#CONFIG_I2C_ALI1535=mCONFIG_I2C_ALI1563=mCONFIG_I2C_ALI15X3=mCONFIG_I2C_AMD756=mCONFIG_I2C_AMD756_S4882=mCONFIG_I2C_AMD8111=mCONFIG_I2C_I801=mCONFIG_I2C_I810=mCONFIG_I2C_PIIX4=mCONFIG_I2C_ISA=mCONFIG_I2C_NFORCE2=m
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not setCONFIG_I2C_PROSAVAGE=mCONFIG_I2C_SAVAGE4=m
# CONFIG_I2C_SIMTEC is not setCONFIG_I2C_SIS5595=mCONFIG_I2C_SIS630=mCONFIG_I2C_SIS96X=mCONFIG_I2C_STUB=m
# CONFIG_I2C_TINY_USB is not setCONFIG_I2C_VIA=mCONFIG_I2C_VIAPRO=mCONFIG_I2C_VOODOO3=m
#
# Miscellaneous I2C Chip support
#CONFIG_SENSORS_DS1337=mCONFIG_SENSORS_DS1374=mCONFIG_SENSORS_EEPROM=mCONFIG_SENSORS_PCF8574=mCONFIG_SENSORS_PCA9539=mCONFIG_SENSORS_PCF8591=mCONFIG_SENSORS_MAX6875=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not setCONFIG_HWMON=yCONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_AD7418 is not setCONFIG_SENSORS_ADM1021=mCONFIG_SENSORS_ADM1025=mCONFIG_SENSORS_ADM1026=m
# CONFIG_SENSORS_ADM1029 is not setCONFIG_SENSORS_ADM1031=mCONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_K8TEMP is not setCONFIG_SENSORS_ASB100=mCONFIG_SENSORS_ATXP1=mCONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_F71805F is not setCONFIG_SENSORS_FSCHER=mCONFIG_SENSORS_FSCPOS=mCONFIG_SENSORS_GL518SM=mCONFIG_SENSORS_GL520SM=m
# CONFIG_SENSORS_CORETEMP is not setCONFIG_SENSORS_IT87=mCONFIG_SENSORS_LM63=mCONFIG_SENSORS_LM75=mCONFIG_SENSORS_LM77=mCONFIG_SENSORS_LM78=mCONFIG_SENSORS_LM80=mCONFIG_SENSORS_LM83=mCONFIG_SENSORS_LM85=mCONFIG_SENSORS_LM87=mCONFIG_SENSORS_LM90=mCONFIG_SENSORS_LM92=mCONFIG_SENSORS_MAX1619=m
# CONFIG_SENSORS_MAX6650 is not setCONFIG_SENSORS_PC87360=m
# CONFIG_SENSORS_PC87427 is not setCONFIG_SENSORS_SIS5595=mCONFIG_SENSORS_SMSC47M1=m
# CONFIG_SENSORS_SMSC47M192 is not setCONFIG_SENSORS_SMSC47B397=mCONFIG_SENSORS_VIA686A=m
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not setCONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83791D is not setCONFIG_SENSORS_W83792D=m
# CONFIG_SENSORS_W83793 is not setCONFIG_SENSORS_W83L785TS=mCONFIG_SENSORS_W83627HF=mCONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#CONFIG_VIDEO_DEV=mCONFIG_VIDEO_V4L1=yCONFIG_VIDEO_V4L1_COMPAT=yCONFIG_VIDEO_V4L2=yCONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not setCONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not setCONFIG_V4L_USB_DRIVERS=y
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_USBVISION is not setCONFIG_VIDEO_USBVIDEO=mCONFIG_USB_VICAM=mCONFIG_USB_IBMCAM=mCONFIG_USB_KONICAWC=m
# CONFIG_USB_QUICKCAM_MESSENGER is not set
# CONFIG_USB_ET61X251 is not setCONFIG_VIDEO_OVCAMCHIP=mCONFIG_USB_W9968CF=mCONFIG_USB_OV511=mCONFIG_USB_SE401=mCONFIG_USB_SN9C102=mCONFIG_USB_STV680=m
# CONFIG_USB_ZC0301 is not setCONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
# CONFIG_USB_ZR364XX is not setCONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not setCONFIG_USB_DSBR=m
# CONFIG_DVB_CORE is not setCONFIG_DAB=yCONFIG_USB_DABUSB=m
#
# Graphics support
#CONFIG_BACKLIGHT_LCD_SUPPORT=yCONFIG_BACKLIGHT_CLASS_DEVICE=yCONFIG_LCD_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_PROGEAR is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not setCONFIG_VGASTATE=mCONFIG_FB=yCONFIG_FIRMWARE_EDID=yCONFIG_FB_DDC=mCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=yCONFIG_FB_SYS_FILLRECT=mCONFIG_FB_SYS_COPYAREA=mCONFIG_FB_SYS_IMAGEBLIT=mCONFIG_FB_SYS_FOPS=mCONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not setCONFIG_FB_BACKLIGHT=yCONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#CONFIG_FB_CIRRUS=m
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not setCONFIG_FB_ARC=m
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not setCONFIG_FB_VGA16=mCONFIG_FB_VESA=y
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not setCONFIG_FB_S1D13XXX=mCONFIG_FB_NVIDIA=mCONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not setCONFIG_FB_NVIDIA_BACKLIGHT=yCONFIG_FB_RIVA=m
# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not setCONFIG_FB_RIVA_BACKLIGHT=y
# CONFIG_FB_LE80578 is not setCONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not setCONFIG_FB_INTEL_I2C=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not setCONFIG_FB_SAVAGE=mCONFIG_FB_SAVAGE_I2C=yCONFIG_FB_SAVAGE_ACCEL=y
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not setCONFIG_FB_KYRO=m
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not setCONFIG_VIDEO_SELECT=yCONFIG_DUMMY_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=yCONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not setCONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#CONFIG_SND=yCONFIG_SND_TIMER=yCONFIG_SND_PCM=yCONFIG_SND_HWDEP=yCONFIG_SND_RAWMIDI=yCONFIG_SND_SEQUENCER=yCONFIG_SND_SEQ_DUMMY=yCONFIG_SND_OSSEMUL=yCONFIG_SND_MIXER_OSS=yCONFIG_SND_PCM_OSS=yCONFIG_SND_PCM_OSS_PLUGINS=yCONFIG_SND_SEQUENCER_OSS=yCONFIG_SND_RTCTIMER=yCONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not setCONFIG_SND_SUPPORT_OLD_API=yCONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#CONFIG_SND_MPU401_UART=yCONFIG_SND_OPL3_LIB=mCONFIG_SND_VX_LIB=mCONFIG_SND_AC97_CODEC=yCONFIG_SND_DUMMY=m
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not setCONFIG_SND_MPU401=y
# CONFIG_SND_PORTMAN2X4 is not set
#
# PCI devices
#CONFIG_SND_AD1889=m
# CONFIG_SND_ALS300 is not setCONFIG_SND_ALS4000=mCONFIG_SND_ALI5451=mCONFIG_SND_ATIIXP=mCONFIG_SND_ATIIXP_MODEM=mCONFIG_SND_AU8810=mCONFIG_SND_AU8820=mCONFIG_SND_AU8830=mCONFIG_SND_AZT3328=mCONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not setCONFIG_SND_CA0106=mCONFIG_SND_CMIPCI=mCONFIG_SND_CS4281=mCONFIG_SND_CS46XX=mCONFIG_SND_CS46XX_NEW_DSP=y
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not setCONFIG_SND_EMU10K1=yCONFIG_SND_EMU10K1X=yCONFIG_SND_ENS1370=mCONFIG_SND_ENS1371=mCONFIG_SND_ES1938=mCONFIG_SND_ES1968=mCONFIG_SND_FM801=m
# CONFIG_SND_FM801_TEA575X_BOOL is not setCONFIG_SND_HDA_INTEL=yCONFIG_SND_HDSP=mCONFIG_SND_HDSPM=mCONFIG_SND_ICE1712=mCONFIG_SND_ICE1724=mCONFIG_SND_INTEL8X0=y
# CONFIG_SND_INTEL8X0M is not setCONFIG_SND_KORG1212=mCONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL=yCONFIG_SND_MAESTRO3=mCONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL=y
# CONFIG_SND_MIXART is not setCONFIG_SND_NM256=m
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not setCONFIG_SND_RME32=mCONFIG_SND_RME96=mCONFIG_SND_RME9652=mCONFIG_SND_SONICVIBES=mCONFIG_SND_TRIDENT=mCONFIG_SND_VIA82XX=yCONFIG_SND_VIA82XX_MODEM=mCONFIG_SND_VX222=mCONFIG_SND_YMFPCI=mCONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=yCONFIG_SND_AC97_POWER_SAVE=y
#
# USB devices
#CONFIG_SND_USB_AUDIO=mCONFIG_SND_USB_USX2Y=m
# CONFIG_SND_USB_CAIAQ is not set
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not setCONFIG_AC97_BUS=y
#
# HID Devices
#CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
#
# USB Input Devices
#CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not setCONFIG_HID_FF=yCONFIG_HID_PID=yCONFIG_LOGITECH_FF=y
# CONFIG_PANTHERLORD_FF is not setCONFIG_THRUSTMASTER_FF=y
# CONFIG_ZEROPLUS_FF is not setCONFIG_USB_HIDDEV=y
#
# USB support
#CONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=yCONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not setCONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#CONFIG_USB_EHCI_HCD=yCONFIG_USB_EHCI_SPLIT_ISO=yCONFIG_USB_EHCI_ROOT_HUB_TT=yCONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_ISP116X_HCD is not setCONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#CONFIG_USB_ACM=mCONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' #
#
# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_DPCM=y CONFIG_USB_STORAGE_USBAT=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#CONFIG_USB_MDC800=mCONFIG_USB_MICROTEK=mCONFIG_USB_MON=y
#
# USB port drivers
#CONFIG_USB_USS720=m
#
# USB Serial Converter support
#CONFIG_USB_SERIAL=mCONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not setCONFIG_USB_SERIAL_AIRPRIME=m
# CONFIG_USB_SERIAL_ARK3116 is not setCONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_WHITEHEAT is not setCONFIG_USB_SERIAL_DIGI_ACCELEPORT=mCONFIG_USB_SERIAL_CP2101=mCONFIG_USB_SERIAL_CYPRESS_M8=mCONFIG_USB_SERIAL_EMPEG=mCONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_FUNSOFT is not setCONFIG_USB_SERIAL_VISOR=mCONFIG_USB_SERIAL_IPAQ=mCONFIG_USB_SERIAL_IR=mCONFIG_USB_SERIAL_EDGEPORT=mCONFIG_USB_SERIAL_EDGEPORT_TI=mCONFIG_USB_SERIAL_GARMIN=mCONFIG_USB_SERIAL_IPW=mCONFIG_USB_SERIAL_KEYSPAN_PDA=mCONFIG_USB_SERIAL_KEYSPAN=mCONFIG_USB_SERIAL_KEYSPAN_MPR=yCONFIG_USB_SERIAL_KEYSPAN_USA28=yCONFIG_USB_SERIAL_KEYSPAN_USA28X=yCONFIG_USB_SERIAL_KEYSPAN_USA28XA=yCONFIG_USB_SERIAL_KEYSPAN_USA28XB=yCONFIG_USB_SERIAL_KEYSPAN_USA19=yCONFIG_USB_SERIAL_KEYSPAN_USA18X=yCONFIG_USB_SERIAL_KEYSPAN_USA19W=yCONFIG_USB_SERIAL_KEYSPAN_USA19QW=yCONFIG_USB_SERIAL_KEYSPAN_USA19QI=yCONFIG_USB_SERIAL_KEYSPAN_USA49W=yCONFIG_USB_SERIAL_KEYSPAN_USA49WLC=yCONFIG_USB_SERIAL_KLSI=mCONFIG_USB_SERIAL_KOBIL_SCT=mCONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_NAVMAN is not setCONFIG_USB_SERIAL_PL2303=mCONFIG_USB_SERIAL_HP4X=mCONFIG_USB_SERIAL_SAFE=mCONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not setCONFIG_USB_SERIAL_TI=mCONFIG_USB_SERIAL_CYBERJACK=mCONFIG_USB_SERIAL_XIRCOM=m
# CONFIG_USB_SERIAL_OPTION is not setCONFIG_USB_SERIAL_OMNINET=m
# CONFIG_USB_SERIAL_DEBUG is not setCONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#CONFIG_USB_EMI62=m
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not setCONFIG_USB_AUERSWALD=mCONFIG_USB_RIO500=mCONFIG_USB_LEGOTOWER=mCONFIG_USB_LCD=m
# CONFIG_USB_BERRY_CHARGE is not setCONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not setCONFIG_USB_TEST=m
#
# USB DSL modem support
#CONFIG_USB_ATM=mCONFIG_USB_SPEEDTOUCH=mCONFIG_USB_CXACRU=m
# CONFIG_USB_UEAGLEATM is not setCONFIG_USB_XUSBATM=m
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) #
# CONFIG_EDAC is not set
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# Auxiliary Display support
#
# CONFIG_KS0108 is not set
#
# Virtualization
#
# CONFIG_KVM is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
#
# File systems
#CONFIG_EXT2_FS=yCONFIG_EXT2_FS_XATTR=yCONFIG_EXT2_FS_POSIX_ACL=yCONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not setCONFIG_EXT3_FS=yCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not setCONFIG_JBD=y
# CONFIG_JBD_DEBUG is not setCONFIG_FS_MBCACHE=yCONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not setCONFIG_REISERFS_PROC_INFO=yCONFIG_REISERFS_FS_XATTR=yCONFIG_REISERFS_FS_POSIX_ACL=yCONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not setCONFIG_FS_POSIX_ACL=yCONFIG_XFS_FS=yCONFIG_XFS_QUOTA=yCONFIG_XFS_SECURITY=yCONFIG_XFS_POSIX_ACL=yCONFIG_XFS_RT=y
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not setCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not setCONFIG_QFMT_V2=yCONFIG_QUOTACTL=yCONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not setCONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=yCONFIG_JOLIET=yCONFIG_ZISOFS=yCONFIG_UDF_FS=yCONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=mCONFIG_MSDOS_FS=mCONFIG_VFAT_FS=mCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_PROC_SYSCTL=yCONFIG_SYSFS=yCONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not setCONFIG_HUGETLBFS=yCONFIG_HUGETLB_PAGE=yCONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not setCONFIG_HFS_FS=mCONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not setCONFIG_JFFS2_FS=mCONFIG_JFFS2_FS_DEBUG=0CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not setCONFIG_JFFS2_ZLIB=yCONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not setCONFIG_CRAMFS=mCONFIG_VXFS_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#CONFIG_NFS_FS=mCONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not setCONFIG_NFS_V4=yCONFIG_NFS_DIRECTIO=yCONFIG_NFSD=mCONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not setCONFIG_NFSD_V4=yCONFIG_NFSD_TCP=yCONFIG_LOCKD=mCONFIG_LOCKD_V4=yCONFIG_EXPORTFS=mCONFIG_NFS_COMMON=yCONFIG_SUNRPC=mCONFIG_SUNRPC_GSS=m
# CONFIG_SUNRPC_BIND34 is not setCONFIG_RPCSEC_GSS_KRB5=mCONFIG_RPCSEC_GSS_SPKM3=mCONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not setCONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not setCONFIG_CIFS_XATTR=yCONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not setCONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not setCONFIG_MAC_PARTITION=yCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=yCONFIG_MINIX_SUBPARTITION=yCONFIG_SOLARIS_X86_PARTITION=yCONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not setCONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not setCONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not setCONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
#
# Native Language Support
#CONFIG_NLS=yCONFIG_NLS_DEFAULT="utf8"CONFIG_NLS_CODEPAGE_437=yCONFIG_NLS_CODEPAGE_737=mCONFIG_NLS_CODEPAGE_775=mCONFIG_NLS_CODEPAGE_850=mCONFIG_NLS_CODEPAGE_852=mCONFIG_NLS_CODEPAGE_855=mCONFIG_NLS_CODEPAGE_857=mCONFIG_NLS_CODEPAGE_860=mCONFIG_NLS_CODEPAGE_861=mCONFIG_NLS_CODEPAGE_862=mCONFIG_NLS_CODEPAGE_863=mCONFIG_NLS_CODEPAGE_864=mCONFIG_NLS_CODEPAGE_865=mCONFIG_NLS_CODEPAGE_866=mCONFIG_NLS_CODEPAGE_869=mCONFIG_NLS_CODEPAGE_936=mCONFIG_NLS_CODEPAGE_950=mCONFIG_NLS_CODEPAGE_932=mCONFIG_NLS_CODEPAGE_949=mCONFIG_NLS_CODEPAGE_874=mCONFIG_NLS_ISO8859_8=mCONFIG_NLS_CODEPAGE_1250=mCONFIG_NLS_CODEPAGE_1251=mCONFIG_NLS_ASCII=yCONFIG_NLS_ISO8859_1=mCONFIG_NLS_ISO8859_2=mCONFIG_NLS_ISO8859_3=mCONFIG_NLS_ISO8859_4=mCONFIG_NLS_ISO8859_5=mCONFIG_NLS_ISO8859_6=mCONFIG_NLS_ISO8859_7=mCONFIG_NLS_ISO8859_9=mCONFIG_NLS_ISO8859_13=mCONFIG_NLS_ISO8859_14=mCONFIG_NLS_ISO8859_15=mCONFIG_NLS_KOI8_R=mCONFIG_NLS_KOI8_U=mCONFIG_NLS_UTF8=m
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Instrumentation Support
#CONFIG_PROFILING=yCONFIG_OPROFILE=mCONFIG_KPROBES=y
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_MUST_CHECK is not setCONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not setCONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not setCONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not setCONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not setCONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not setCONFIG_DEBUG_RODATA=y
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Security options
#CONFIG_KEYS=yCONFIG_KEYS_DEBUG_PROC_KEYS=yCONFIG_SECURITY=yCONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set CONFIG_SECURITY_CAPABILITIES=m
# CONFIG_SECURITY_ROOTPLUG is not set CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
#
# Cryptographic options
#CONFIG_CRYPTO=yCONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_BLKCIPHER=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_HMAC=yCONFIG_CRYPTO_XCBC=yCONFIG_CRYPTO_NULL=yCONFIG_CRYPTO_MD4=yCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_SHA1=yCONFIG_CRYPTO_SHA256=yCONFIG_CRYPTO_SHA512=yCONFIG_CRYPTO_WP512=yCONFIG_CRYPTO_TGR192=yCONFIG_CRYPTO_GF128MUL=yCONFIG_CRYPTO_ECB=yCONFIG_CRYPTO_CBC=yCONFIG_CRYPTO_PCBC=mCONFIG_CRYPTO_LRW=y
# CONFIG_CRYPTO_CRYPTD is not setCONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not setCONFIG_CRYPTO_BLOWFISH=yCONFIG_CRYPTO_TWOFISH=yCONFIG_CRYPTO_TWOFISH_COMMON=yCONFIG_CRYPTO_TWOFISH_X86_64=yCONFIG_CRYPTO_SERPENT=yCONFIG_CRYPTO_AES=yCONFIG_CRYPTO_AES_X86_64=yCONFIG_CRYPTO_CAST5=yCONFIG_CRYPTO_CAST6=yCONFIG_CRYPTO_TEA=yCONFIG_CRYPTO_ARC4=yCONFIG_CRYPTO_KHAZAD=yCONFIG_CRYPTO_ANUBIS=yCONFIG_CRYPTO_DEFLATE=yCONFIG_CRYPTO_MICHAEL_MIC=yCONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_CRC_CCITT=yCONFIG_CRC16=y
# CONFIG_CRC_ITU_T is not setCONFIG_CRC32=yCONFIG_LIBCRC32C=yCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_TEXTSEARCH=yCONFIG_TEXTSEARCH_KMP=mCONFIG_TEXTSEARCH_BM=mCONFIG_TEXTSEARCH_FSM=mCONFIG_PLIST=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=y
Re: 2.6.22-rc3 nmi watchdog hang
Quoted 5 lines · Ingo Molnar
Quoted 2 lines · Björn Steinbrink
Quoted 2 lines
[PATCH] i386: Clean up NMI watchdog code
Quoted 8 lines
Quoted 3 lines
Quoted 1 line
Andi - just boot with nmi_watchdog=2 on a dual-core Athlon64 CPU.
I still fail to reproduce this, could you send me your config?
attached below. nmi_watchdog=2 still hangs as of -rc5, using the 32-bit kernel (at various places during bootup - a typical place is somewhere after
cfq_init()). Changing it to nmi_watchdog=0 makes the kernel boot again.
Still no hang here. Just to make sure that I didn't mess the test up, here's what I did:
Get pristine 2.6.22-rc5 kernel sources.
Put your config in place as .config
Run: make ARCH=i386 CFLAGS_KERNEL="-m32" AFLAGS_KERNEL="-m32" Install the kernel.
Reboot, pass "nmi_watchdog=2" as kernel parameter.
As your config is for a 64bit kernel, several config items had to be set manually. In one run, I accepted the default values, in the second run, I tried to adjust those items to match your 64bit config as good as I could.
Anything wrong with that?
Björn
Re: 2.6.22-rc3 nmi watchdog hang
In reply to Ingo MolnarQuoted 4 lines · Ingo Molnar
attached below. nmi_watchdog=2 still hangs as of -rc5, using the 32-bit kernel (at various places during bootup - a typical place is somewhere after
cfq_init()). Changing it to nmi_watchdog=0 makes the kernel boot again.
FYI, latest -git _still_ hangs with the NMI watchdog with nmi_watchdog=2, at the same place:
Calling initcall 0xc06cc620: check_nmi_watchdog+0x0/0x1f0() Testing NMI watchdog ... CPU#0: NMI appears to be stuck (0->0)! CPU#1: NMI appears to be stuck (0->0)!
initcall 0xc06cc620: check_nmi_watchdog+0x0/0x1f0() returned -1. initcall 0xc06cc620 ran for 27 msecs: check_nmi_watchdog+0x0/0x1f0() initcall at 0xc06cc620: check_nmi_watchdog+0x0/0x1f0(): returned with error code -1
Calling initcall 0xc06ccbb0: io_apic_bug_finalize+0x0/0x20() initcall 0xc06ccbb0: io_apic_bug_finalize+0x0/0x20() returned 0. initcall 0xc06ccbb0 ran for 0 msecs: io_apic_bug_finalize+0x0/0x20() Calling initcall 0xc06ccd00: balanced_irq_init+0x0/0x1e0() Starting balanced_irq
[hard hang]
full bootlog attached below.
Ingo
-------------------------------->
Linux version 2.6.22-rc5-cfs-v19 (mingo@dione) (gcc version 4.0.2) #7 SMP Mon Jun 25 08:09:25 CEST 2007 BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f5680
Entering add_active_range(0, 0, 262128) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 262128
early_node_map[1] active PFN ranges
0: 0 -> 262128
On node 0 totalpages: 262128
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 255 pages used for memmap
HighMem zone: 32497 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP 000F76F0, 0014 (r0 Nvidia)
ACPI: RSDT 3FFF3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
ACPI: FACP 3FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
ACPI: DSDT 3FFF3180, 6264 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)
ACPI: FACS 3FFF0000, 0040
ACPI: SRAT 3FFF9500, 00A0 (r1 AMD HAMMER 1 AMD 1)
ACPI: MCFG 3FFF9600, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
ACPI: APIC 3FFF9440, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:3 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:3 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Built 1 zonelists. Total pages: 260081
Kernel command line: root=/dev/hda1 console=tty 3 debug profile=0 initcall_debug maxcpus=2 selinux=1 enforcing=0 apic=verbose ignore_loglevel nmi_watchdog=2 sysrq_always_enabled earlyprintk=serial,ttyS0,115200,keep kernel profiling enabled (shift: 0)
debug: ignoring loglevel setting.
debug: sysrq always enabled.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2160.217 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25num_possible_cpus(): 2
CPU#0: allocated 33554432 bytes trace buffer.
CPU#0: allocated 33554432 bytes max-trace buffer.
CPU#1: allocated 33554432 bytes trace buffer.
CPU#1: allocated 33554432 bytes max-trace buffer.
allocated 67108864 bytes out-trace buffer.
tracer: a total of 201326592 bytes allocated.
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 818000k/1048512k available (4339k kernel code, 229872k reserved, 1516k data, 408k init, 131008k highmem)
virtual kernel memory layout:
fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc06bf000 - 0xc0725000 ( 408 kB)
.data : 0xc053cc70 - 0xc06b7f54 (1516 kB)
.text : 0xc0100000 - 0xc053cc70 (4339 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4321.76 BogoMIPS (lpj=2160884)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)CPU 0(2) -> Core 0
CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003 Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
enabled ExtINT on CPU#0
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
Calibrating delay using timer specific routine.. 4319.79 BogoMIPS (lpj=2159895)
CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1(2) -> Core 1
CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003 Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
Total of 2 processors activated (8641.55 BogoMIPS).
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
... lapic delta = 1349919
... PM timer delta = 357900
... PM timer result ok
..... delta 1349919
..... mult: 57987393
..... calibration result: 215987
..... CPU clock speed is 2159.0871 MHz.
..... host bus clock speed is 215.0987 MHz.
Brought up 2 CPUs
Calling initcall 0xc06e0bd0: init_cpufreq_transition_notifier_list+0x0/0x20() initcall 0xc06e0bd0: init_cpufreq_transition_notifier_list+0x0/0x20() returned 0. initcall 0xc06e0bd0 ran for 0 msecs: init_cpufreq_transition_notifier_list+0x0/0x20() Calling initcall 0xc06c80a0: cpufreq_tsc+0x0/0x20()
initcall 0xc06c80a0: cpufreq_tsc+0x0/0x20() returned 0.
initcall 0xc06c80a0 ran for 0 msecs: cpufreq_tsc+0x0/0x20()
Calling initcall 0xc06c9cb0: acpisleep_dmi_init+0x0/0x20()
initcall 0xc06c9cb0: acpisleep_dmi_init+0x0/0x20() returned 0.
initcall 0xc06c9cb0 ran for 0 msecs: acpisleep_dmi_init+0x0/0x20()
Calling initcall 0xc06c9ec0: reboot_init+0x0/0x20()
initcall 0xc06c9ec0: reboot_init+0x0/0x20() returned 0.
initcall 0xc06c9ec0 ran for 0 msecs: reboot_init+0x0/0x20()
Calling initcall 0xc06cf100: print_banner+0x0/0x10()
Booting paravirtualized kernel on bare hardware
initcall 0xc06cf100: print_banner+0x0/0x10() returned 0.
initcall 0xc06cf100 ran for 0 msecs: print_banner+0x0/0x10()
Calling initcall 0xc06d0d30: sysctl_init+0x0/0x20()
initcall 0xc06d0d30: sysctl_init+0x0/0x20() returned 0.
initcall 0xc06d0d30 ran for 0 msecs: sysctl_init+0x0/0x20()
Calling initcall 0xc06d1760: init_jiffies_clocksource+0x0/0x10()
initcall 0xc06d1760: init_jiffies_clocksource+0x0/0x10() returned 0.
initcall 0xc06d1760 ran for 0 msecs: init_jiffies_clocksource+0x0/0x10()
Calling initcall 0xc06d1880: pm_init+0x0/0x30()
initcall 0xc06d1880: pm_init+0x0/0x30() returned 0.
initcall 0xc06d1880 ran for 0 msecs: pm_init+0x0/0x30()
Calling initcall 0xc06d18b0: pm_disk_init+0x0/0x20()
initcall 0xc06d18b0: pm_disk_init+0x0/0x20() returned 0.
initcall 0xc06d18b0 ran for 0 msecs: pm_disk_init+0x0/0x20()
Calling initcall 0xc0157690: swsusp_header_init+0x0/0x30()
initcall 0xc0157690: swsusp_header_init+0x0/0x30() returned 0.
initcall 0xc0157690 ran for 0 msecs: swsusp_header_init+0x0/0x30()
Calling initcall 0xc06d1e50: ksysfs_init+0x0/0x30()
initcall 0xc06d1e50: ksysfs_init+0x0/0x30() returned 0.
initcall 0xc06d1e50 ran for 0 msecs: ksysfs_init+0x0/0x30()
Calling initcall 0xc06d4480: filelock_init+0x0/0x40()
initcall 0xc06d4480: filelock_init+0x0/0x40() returned 0.
initcall 0xc06d4480 ran for 0 msecs: filelock_init+0x0/0x40()
Calling initcall 0xc06d4ff0: init_misc_binfmt+0x0/0x40()
initcall 0xc06d4ff0: init_misc_binfmt+0x0/0x40() returned 0.
initcall 0xc06d4ff0 ran for 0 msecs: init_misc_binfmt+0x0/0x40()
Calling initcall 0xc06d5030: init_script_binfmt+0x0/0x10()
initcall 0xc06d5030: init_script_binfmt+0x0/0x10() returned 0.
initcall 0xc06d5030 ran for 0 msecs: init_script_binfmt+0x0/0x10()
Calling initcall 0xc06d5040: init_elf_binfmt+0x0/0x10()
initcall 0xc06d5040: init_elf_binfmt+0x0/0x10() returned 0.
initcall 0xc06d5040 ran for 0 msecs: init_elf_binfmt+0x0/0x10()
Calling initcall 0xc06d6070: securityfs_init+0x0/0x50()
initcall 0xc06d6070: securityfs_init+0x0/0x50() returned 0.
initcall 0xc06d6070 ran for 0 msecs: securityfs_init+0x0/0x50()
Calling initcall 0xc06d6b00: random32_init+0x0/0x70()
initcall 0xc06d6b00: random32_init+0x0/0x70() returned 0.
initcall 0xc06d6b00 ran for 0 msecs: random32_init+0x0/0x70()
Calling initcall 0xc06e0bf0: cpufreq_core_init+0x0/0x80()
initcall 0xc06e0bf0: cpufreq_core_init+0x0/0x80() returned 0.
initcall 0xc06e0bf0 ran for 0 msecs: cpufreq_core_init+0x0/0x80()
Calling initcall 0xc06e43f0: sock_init+0x0/0x60()
initcall 0xc06e43f0: sock_init+0x0/0x60() returned 0.
initcall 0xc06e43f0 ran for 0 msecs: sock_init+0x0/0x60()
Calling initcall 0xc06e4bb0: netpoll_init+0x0/0x30()
initcall 0xc06e4bb0: netpoll_init+0x0/0x30() returned 0.
initcall 0xc06e4bb0 ran for 0 msecs: netpoll_init+0x0/0x30()
Calling initcall 0xc06e4eb0: netlink_proto_init+0x0/0x150()
NET: Registered protocol family 16
initcall 0xc06e4eb0: netlink_proto_init+0x0/0x150() returned 0.
initcall 0xc06e4eb0 ran for 0 msecs: netlink_proto_init+0x0/0x150()
Calling initcall 0xc06d69f0: kobject_uevent_init+0x0/0x50()
initcall 0xc06d69f0: kobject_uevent_init+0x0/0x50() returned 0.
initcall 0xc06d69f0 ran for 0 msecs: kobject_uevent_init+0x0/0x50()
Calling initcall 0xc06d6c30: pcibus_class_init+0x0/0x10()
initcall 0xc06d6c30: pcibus_class_init+0x0/0x10() returned 0.
initcall 0xc06d6c30 ran for 0 msecs: pcibus_class_init+0x0/0x10()
Calling initcall 0xc06d7270: pci_driver_init+0x0/0x10()
initcall 0xc06d7270: pci_driver_init+0x0/0x10() returned 0.
initcall 0xc06d7270 ran for 0 msecs: pci_driver_init+0x0/0x10()
Calling initcall 0xc06d7af0: backlight_class_init+0x0/0x10()
initcall 0xc06d7af0: backlight_class_init+0x0/0x10() returned 0.
initcall 0xc06d7af0 ran for 0 msecs: backlight_class_init+0x0/0x10()
Calling initcall 0xc06da0e0: tty_class_init+0x0/0x30()
initcall 0xc06da0e0: tty_class_init+0x0/0x30() returned 0.
initcall 0xc06da0e0 ran for 0 msecs: tty_class_init+0x0/0x30()
Calling initcall 0xc06da7f0: vtconsole_class_init+0x0/0xd0()
initcall 0xc06da7f0: vtconsole_class_init+0x0/0xd0() returned 0.
initcall 0xc06da7f0 ran for 0 msecs: vtconsole_class_init+0x0/0xd0()
Calling initcall 0xc06e0530: eisa_init+0x0/0x30()
EISA bus registered
initcall 0xc06e0530: eisa_init+0x0/0x30() returned 0.
initcall 0xc06e0530 ran for 0 msecs: eisa_init+0x0/0x30()
Calling initcall 0xc06c7ff0: init_pit_clocksource+0x0/0x90()
initcall 0xc06c7ff0: init_pit_clocksource+0x0/0x90() returned 0.
initcall 0xc06c7ff0 ran for 0 msecs: init_pit_clocksource+0x0/0x90()
Calling initcall 0xc06c8b00: mtrr_if_init+0x0/0x60()
initcall 0xc06c8b00: mtrr_if_init+0x0/0x60() returned 0.
initcall 0xc06c8b00 ran for 0 msecs: mtrr_if_init+0x0/0x60()
Calling initcall 0xc06c9d90: ffh_cstate_init+0x0/0x30()
initcall 0xc06c9d90: ffh_cstate_init+0x0/0x30() returned -1.
initcall 0xc06c9d90 ran for 0 msecs: ffh_cstate_init+0x0/0x30()
initcall at 0xc06c9d90: ffh_cstate_init+0x0/0x30(): returned with error code -1 Calling initcall 0xc06d7550: acpi_pci_init+0x0/0x50()
ACPI: bus type pci registered
initcall 0xc06d7550: acpi_pci_init+0x0/0x50() returned 0.
initcall 0xc06d7550 ran for 0 msecs: acpi_pci_init+0x0/0x50()
Calling initcall 0xc06d930b: init_acpi_device_notify+0x0/0x45()
initcall 0xc06d930b: init_acpi_device_notify+0x0/0x45() returned 0.
initcall 0xc06d930b ran for 0 msecs: init_acpi_device_notify+0x0/0x45()
Calling initcall 0xc06e2b70: pci_access_init+0x0/0x50()
PCI: Using MMCONFIG
PCI: No mmconfig possible on device 00:18
initcall 0xc06e2b70: pci_access_init+0x0/0x50() returned 0.
initcall 0xc06e2b70 ran for 1 msecs: pci_access_init+0x0/0x50()
Calling initcall 0xc06c7960: request_standard_resources+0x0/0x3b0()
Setting up standard PCI resources
initcall 0xc06c7960: request_standard_resources+0x0/0x3b0() returned 0.
initcall 0xc06c7960 ran for 3 msecs: request_standard_resources+0x0/0x3b0() Calling initcall 0xc06c7d40: topology_init+0x0/0x60()
initcall 0xc06c7d40: topology_init+0x0/0x60() returned 0.
initcall 0xc06c7d40 ran for 0 msecs: topology_init+0x0/0x60()
Calling initcall 0xc06c8800: mtrr_init_finialize+0x0/0x40()
initcall 0xc06c8800: mtrr_init_finialize+0x0/0x40() returned 0.
initcall 0xc06c8800 ran for 0 msecs: mtrr_init_finialize+0x0/0x40()
Calling initcall 0xc06c9ee0: mca_init+0x0/0x340()
initcall 0xc06c9ee0: mca_init+0x0/0x340() returned -19.
initcall 0xc06c9ee0 ran for 0 msecs: mca_init+0x0/0x340()
Calling initcall 0xc06d1110: param_sysfs_init+0x0/0x1e0()
initcall 0xc06d1110: param_sysfs_init+0x0/0x1e0() returned 0.
initcall 0xc06d1110 ran for 1 msecs: param_sysfs_init+0x0/0x1e0()
Calling initcall 0xc0158930: pm_sysrq_init+0x0/0x20()
initcall 0xc0158930: pm_sysrq_init+0x0/0x20() returned 0.
initcall 0xc0158930 ran for 0 msecs: pm_sysrq_init+0x0/0x20()
Calling initcall 0xc06d4c30: init_bio+0x0/0xd0()
initcall 0xc06d4c30: init_bio+0x0/0xd0() returned 0.
initcall 0xc06d4c30 ran for 0 msecs: init_bio+0x0/0xd0()
Calling initcall 0xc06d6720: genhd_device_init+0x0/0x60()
initcall 0xc06d6720: genhd_device_init+0x0/0x60() returned 0.
initcall 0xc06d6720 ran for 0 msecs: genhd_device_init+0x0/0x60()
Calling initcall 0xc06d75a0: fbmem_init+0x0/0xa0()
initcall 0xc06d75a0: fbmem_init+0x0/0xa0() returned 0.
initcall 0xc06d75a0 ran for 0 msecs: fbmem_init+0x0/0xa0()
Calling initcall 0xc06d910c: acpi_init+0x0/0x1ff()
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
initcall 0xc06d910c: acpi_init+0x0/0x1ff() returned 0.
initcall 0xc06d910c ran for 9 msecs: acpi_init+0x0/0x1ff()
Calling initcall 0xc06d9350: acpi_scan_init+0x0/0xfc()
initcall 0xc06d9350: acpi_scan_init+0x0/0xfc() returned 0.
initcall 0xc06d9350 ran for 9 msecs: acpi_scan_init+0x0/0xfc()
Calling initcall 0xc06d94d4: acpi_ec_init+0x0/0x55()
initcall 0xc06d94d4: acpi_ec_init+0x0/0x55() returned 0.
initcall 0xc06d94d4 ran for 0 msecs: acpi_ec_init+0x0/0x55()
Calling initcall 0xc06d957c: acpi_pci_root_init+0x0/0x25()
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:09.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
initcall 0xc06d957c: acpi_pci_root_init+0x0/0x25() returned 0.
initcall 0xc06d957c ran for 55 msecs: acpi_pci_root_init+0x0/0x25()
Calling initcall 0xc06d9675: acpi_pci_link_init+0x0/0x43()
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
initcall 0xc06d9675: acpi_pci_link_init+0x0/0x43() returned 0.
initcall 0xc06d9675 ran for 119 msecs: acpi_pci_link_init+0x0/0x43()
Calling initcall 0xc06d974f: acpi_power_init+0x0/0x69()
initcall 0xc06d974f: acpi_power_init+0x0/0x69() returned 0.
initcall 0xc06d974f ran for 0 msecs: acpi_power_init+0x0/0x69()
Calling initcall 0xc06d97b8: acpi_system_init+0x0/0xad()
initcall 0xc06d97b8: acpi_system_init+0x0/0xad() returned 0.
initcall 0xc06d97b8 ran for 0 msecs: acpi_system_init+0x0/0xad()
Calling initcall 0xc06d9865: acpi_event_init+0x0/0x38()
initcall 0xc06d9865: acpi_event_init+0x0/0x38() returned 0.
initcall 0xc06d9865 ran for 0 msecs: acpi_event_init+0x0/0x38()
Calling initcall 0xc06d989d: acpi_cm_sbs_init+0x0/0x13()
initcall 0xc06d989d: acpi_cm_sbs_init+0x0/0x13() returned 0.
initcall 0xc06d989d ran for 0 msecs: acpi_cm_sbs_init+0x0/0x13()
Calling initcall 0xc06d98b0: pnp_init+0x0/0x20()
Linux Plug and Play Support v0.97 (c) Adam Belay
initcall 0xc06d98b0: pnp_init+0x0/0x20() returned 0.
initcall 0xc06d98b0 ran for 0 msecs: pnp_init+0x0/0x20()
Calling initcall 0xc06d9b40: pnpacpi_init+0x0/0x90()
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
initcall 0xc06d9b40: pnpacpi_init+0x0/0x90() returned 0.
initcall 0xc06d9b40 ran for 8 msecs: pnpacpi_init+0x0/0x90()
Calling initcall 0xc06da520: misc_init+0x0/0x80()
initcall 0xc06da520: misc_init+0x0/0x80() returned 0.
initcall 0xc06da520 ran for 0 msecs: misc_init+0x0/0x80()
Calling initcall 0xc06dd9e0: init_scsi+0x0/0xb0()
SCSI subsystem initialized
initcall 0xc06dd9e0: init_scsi+0x0/0xb0() returned 0.
initcall 0xc06dd9e0 ran for 0 msecs: init_scsi+0x0/0xb0()
Calling initcall 0xc06de2f0: ata_init+0x0/0x80()
libata version 2.21 loaded.
initcall 0xc06de2f0: ata_init+0x0/0x80() returned 0.
initcall 0xc06de2f0 ran for 0 msecs: ata_init+0x0/0x80()
Calling initcall 0xc06df270: init_pcmcia_cs+0x0/0x40()
initcall 0xc06df270: init_pcmcia_cs+0x0/0x40() returned 0.
initcall 0xc06df270 ran for 0 msecs: init_pcmcia_cs+0x0/0x40()
Calling initcall 0xc06df3f0: usb_init+0x0/0x110()
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall 0xc06df3f0: usb_init+0x0/0x110() returned 0.
initcall 0xc06df3f0 ran for 2 msecs: usb_init+0x0/0x110()
Calling initcall 0xc06df900: serio_init+0x0/0xb0()
initcall 0xc06df900: serio_init+0x0/0xb0() returned 0.
initcall 0xc06df900 ran for 0 msecs: serio_init+0x0/0xb0()
Calling initcall 0xc06dfdf0: input_init+0x0/0x120()
initcall 0xc06dfdf0: input_init+0x0/0x120() returned 0.
initcall 0xc06dfdf0 ran for 0 msecs: input_init+0x0/0x120()
Calling initcall 0xc06e0130: hwmon_init+0x0/0x40()
initcall 0xc06e0130: hwmon_init+0x0/0x40() returned 0.
initcall 0xc06e0130 ran for 0 msecs: hwmon_init+0x0/0x40()
Calling initcall 0xc06e27d0: ac97_bus_init+0x0/0x10()
initcall 0xc06e27d0: ac97_bus_init+0x0/0x10() returned 0.
initcall 0xc06e27d0 ran for 0 msecs: ac97_bus_init+0x0/0x10()
Calling initcall 0xc06e3770: pci_acpi_init+0x0/0xb0()
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report number of MP IRQ sources: 16.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 00000000
....... : physical APIC id: 00 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 003 03 0 0 0 0 0 1 1 31 01 003 03 1 0 0 0 0 1 1 39 02 003 03 0 0 0 0 0 1 1 41 03 003 03 1 0 0 0 0 1 1 49 04 003 03 1 0 0 0 0 1 1 51 05 003 03 1 0 0 0 0 1 1 59 06 003 03 1 0 0 0 0 1 1 61 07 003 03 1 0 0 0 0 1 1 69 08 003 03 1 0 0 0 0 1 1 71 09 003 03 0 1 0 0 0 1 1 79 0a 003 03 1 0 0 0 0 1 1 81 0b 003 03 1 0 0 0 0 1 1 89 0c 003 03 1 0 0 0 0 1 1 91 0d 003 03 1 0 0 0 0 1 1 99 0e 003 03 0 0 0 0 0 1 1 A1 0f 003 03 0 0 0 0 0 1 1 A9 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:0
IRQ1 -> 0:1
IRQ2 -> 0:2
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
initcall 0xc06e3770: pci_acpi_init+0x0/0xb0() returned 0.
initcall 0xc06e3770 ran for 82 msecs: pci_acpi_init+0x0/0xb0()
Calling initcall 0xc06e3820: pci_legacy_init+0x0/0x120()
initcall 0xc06e3820: pci_legacy_init+0x0/0x120() returned 0.
initcall 0xc06e3820 ran for 0 msecs: pci_legacy_init+0x0/0x120()
Calling initcall 0xc06e3e50: pcibios_irq_init+0x0/0x510()
initcall 0xc06e3e50: pcibios_irq_init+0x0/0x510() returned 0.
initcall 0xc06e3e50 ran for 0 msecs: pcibios_irq_init+0x0/0x510()
Calling initcall 0xc06e4360: pcibios_init+0x0/0x90()
initcall 0xc06e4360: pcibios_init+0x0/0x90() returned 0.
initcall 0xc06e4360 ran for 0 msecs: pcibios_init+0x0/0x90()
Calling initcall 0xc06e44b0: proto_init+0x0/0x30()
initcall 0xc06e44b0: proto_init+0x0/0x30() returned 0.
initcall 0xc06e44b0 ran for 0 msecs: proto_init+0x0/0x30()
Calling initcall 0xc06e4620: net_dev_init+0x0/0x220()
initcall 0xc06e4620: net_dev_init+0x0/0x220() returned 0.
initcall 0xc06e4620 ran for 0 msecs: net_dev_init+0x0/0x220()
Calling initcall 0xc06e4880: neigh_init+0x0/0x80()
initcall 0xc06e4880: neigh_init+0x0/0x80() returned 0.
initcall 0xc06e4880 ran for 0 msecs: neigh_init+0x0/0x80()
Calling initcall 0xc06e4be0: fib_rules_init+0x0/0x60()
initcall 0xc06e4be0: fib_rules_init+0x0/0x60() returned 0.
initcall 0xc06e4be0 ran for 0 msecs: fib_rules_init+0x0/0x60()
Calling initcall 0xc06e4d70: pktsched_init+0x0/0xd0()
initcall 0xc06e4d70: pktsched_init+0x0/0xd0() returned 0.
initcall 0xc06e4d70 ran for 0 msecs: pktsched_init+0x0/0xd0()
Calling initcall 0xc06e4e50: tc_filter_init+0x0/0x60()
initcall 0xc06e4e50: tc_filter_init+0x0/0x60() returned 0.
initcall 0xc06e4e50 ran for 0 msecs: tc_filter_init+0x0/0x60()
Calling initcall 0xc06e5000: genl_init+0x0/0xb0()
initcall 0xc06e5000: genl_init+0x0/0xb0() returned 0.
initcall 0xc06e5000 ran for 0 msecs: genl_init+0x0/0xb0()
Calling initcall 0xc06e72b0: wireless_nlevent_init+0x0/0x2c()
initcall 0xc06e72b0: wireless_nlevent_init+0x0/0x2c() returned 0. initcall 0xc06e72b0 ran for 0 msecs: wireless_nlevent_init+0x0/0x2c() Calling initcall 0xc06d1630: clocksource_done_booting+0x0/0x20()
initcall 0xc06d1630: clocksource_done_booting+0x0/0x20() returned 0. initcall 0xc06d1630 ran for 0 msecs: clocksource_done_booting+0x0/0x20() Calling initcall 0xc06d43f0: init_pipe_fs+0x0/0x50()
initcall 0xc06d43f0: init_pipe_fs+0x0/0x50() returned 0.
initcall 0xc06d43f0 ran for 0 msecs: init_pipe_fs+0x0/0x50()
Calling initcall 0xc06d4e60: eventpoll_init+0x0/0x90()
initcall 0xc06d4e60: eventpoll_init+0x0/0x90() returned 0.
initcall 0xc06d4e60 ran for 0 msecs: eventpoll_init+0x0/0x90()
Calling initcall 0xc06d4ef0: anon_inode_init+0x0/0x100()
initcall 0xc06d4ef0: anon_inode_init+0x0/0x100() returned 0.
initcall 0xc06d4ef0 ran for 0 msecs: anon_inode_init+0x0/0x100()
Calling initcall 0xc06d9a10: pnp_system_init+0x0/0x10()
pnp: 00:01: ioport range 0x4000-0x407f has been reserved
pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
pnp: 00:01: ioport range 0x4400-0x447f has been reserved
pnp: 00:01: ioport range 0x4480-0x44ff has been reserved
pnp: 00:01: ioport range 0x4800-0x487f has been reserved
pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
pnp: 00:0e: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:0f: iomem range 0xf0000-0xf3fff could not be reserved
pnp: 00:0f: iomem range 0xf4000-0xf7fff could not be reserved
pnp: 00:0f: iomem range 0xf8000-0xfbfff could not be reserved
pnp: 00:0f: iomem range 0xfc000-0xfffff could not be reserved
initcall 0xc06d9a10: pnp_system_init+0x0/0x10() returned 0.
initcall 0xc06d9a10 ran for 10 msecs: pnp_system_init+0x0/0x10()
Calling initcall 0xc06d9fe0: chr_dev_init+0x0/0x90()
initcall 0xc06d9fe0: chr_dev_init+0x0/0x90() returned 0.
initcall 0xc06d9fe0 ran for 0 msecs: chr_dev_init+0x0/0x90()
Calling initcall 0xc06dc6a0: firmware_class_init+0x0/0x70()
initcall 0xc06dc6a0: firmware_class_init+0x0/0x70() returned 0.
initcall 0xc06dc6a0 ran for 0 msecs: firmware_class_init+0x0/0x70() Calling initcall 0xc06df2b0: init_pcmcia_bus+0x0/0x90()
initcall 0xc06df2b0: init_pcmcia_bus+0x0/0x90() returned 0.
initcall 0xc06df2b0 ran for 0 msecs: init_pcmcia_bus+0x0/0x90()
Calling initcall 0xc06e0c70: cpufreq_gov_userspace_init+0x0/0x20() initcall 0xc06e0c70: cpufreq_gov_userspace_init+0x0/0x20() returned 0. initcall 0xc06e0c70 ran for 0 msecs: cpufreq_gov_userspace_init+0x0/0x20() Calling initcall 0xc06e1260: init_acpi_pm_clocksource+0x0/0x1d0() initcall 0xc06e1260<6>Time: acpi_pm clocksource has been installed. Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
: init_acpi_pm_clocksource+0x0/0x1d0() returned 0.
initcall 0xc06e1260 ran for 28 msecs: init_acpi_pm_clocksource+0x0/0x1d0() Calling initcall 0xc06e2850: pcibios_assign_resources+0x0/0xb0()
PCI: Bridge: 0000:00:09.0
IO window: c000-cfff
MEM window: da000000-da0fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0e.0
IO window: b000-bfff
MEM window: d8000000-d9ffffff
PREFETCH window: d0000000-d7ffffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
initcall 0xc06e2850: pcibios_assign_resources+0x0/0xb0() returned 0. initcall 0xc06e2850 ran for 69 msecs: pcibios_assign_resources+0x0/0xb0() Calling initcall 0xc06e5c20: inet_init+0x0/0x310()
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
initcall 0xc06e5c20: inet_init+0x0/0x310() returned 0.
initcall 0xc06e5c20 ran for 41 msecs: inet_init+0x0/0x310()
Calling initcall 0xc06c58a0: populate_rootfs+0x0/0x100()
initcall 0xc06c58a0: populate_rootfs+0x0/0x100() returned 0.
initcall 0xc06c58a0 ran for 0 msecs: populate_rootfs+0x0/0x100()
Calling initcall 0xc06c6a80: i8259A_init_sysfs+0x0/0x30()
initcall 0xc06c6a80: i8259A_init_sysfs+0x0/0x30() returned 0.
initcall 0xc06c6a80 ran for 0 msecs: i8259A_init_sysfs+0x0/0x30()
Calling initcall 0xc06c6bc0: sbf_init+0x0/0xf0()
initcall 0xc06c6bc0: sbf_init+0x0/0xf0() returned 0.
initcall 0xc06c6bc0 ran for 0 msecs: sbf_init+0x0/0xf0()
Calling initcall 0xc06c7d10: i8237A_init_sysfs+0x0/0x30()
initcall 0xc06c7d10: i8237A_init_sysfs+0x0/0x30() returned 0.
initcall 0xc06c7d10 ran for 0 msecs: i8237A_init_sysfs+0x0/0x30()
Calling initcall 0xc010eed0: cache_sysfs_init+0x0/0x80()
initcall 0xc010eed0: cache_sysfs_init+0x0/0x80() returned 0.
initcall 0xc010eed0 ran for 0 msecs: cache_sysfs_init+0x0/0x80()
Calling initcall 0xc06c86f0: thermal_throttle_init_device+0x0/0xc0() initcall 0xc06c86f0: thermal_throttle_init_device+0x0/0xc0() returned 0. initcall 0xc06c86f0 ran for 0 msecs: thermal_throttle_init_device+0x0/0xc0() Calling initcall 0xc06c87b0: init_nonfatal_mce_checker+0x0/0x50()
Machine check exception polling timer started.
initcall 0xc06c87b0: init_nonfatal_mce_checker+0x0/0x50() returned 0. initcall 0xc06c87b0 ran for 3 msecs: init_nonfatal_mce_checker+0x0/0x50() Calling initcall 0xc06cb880: init_lapic_sysfs+0x0/0x30()
initcall 0xc06cb880: init_lapic_sysfs+0x0/0x30() returned 0.
initcall 0xc06cb880 ran for 0 msecs: init_lapic_sysfs+0x0/0x30()
Calling initcall 0xc06ccc30: ioapic_init_sysfs+0x0/0xd0()
initcall 0xc06ccc30: ioapic_init_sysfs+0x0/0xd0() returned 0.
initcall 0xc06ccc30 ran for 0 msecs: ioapic_init_sysfs+0x0/0xd0()
Calling initcall 0xc06ce940: serial8250_x86_com_init+0x0/0x30()
initcall 0xc06ce940: serial8250_x86_com_init+0x0/0x30() returned -19. initcall 0xc06ce940 ran for 0 msecs: serial8250_x86_com_init+0x0/0x30() Calling initcall 0xc06ced90: hpet_register_sysfs+0x0/0x50()
initcall 0xc06ced90: hpet_register_sysfs+0x0/0x50() returned 0.
initcall 0xc06ced90 ran for 0 msecs: hpet_register_sysfs+0x0/0x50() Calling initcall 0xc06cf110: add_pcspkr+0x0/0x60()
initcall 0xc06cf110: add_pcspkr+0x0/0x60() returned 0.
initcall 0xc06cf110 ran for 0 msecs: add_pcspkr+0x0/0x60()
Calling initcall 0xc06cfe00: init_sched_debug_procfs+0x0/0x30()
initcall 0xc06cfe00: init_sched_debug_procfs+0x0/0x30() returned 0. initcall 0xc06cfe00 ran for 0 msecs: init_sched_debug_procfs+0x0/0x30() Calling initcall 0xc06d09e0: create_proc_profile+0x0/0x1b0()
initcall 0xc06d09e0: create_proc_profile+0x0/0x1b0() returned 0.
initcall 0xc06d09e0 ran for 0 msecs: create_proc_profile+0x0/0x1b0() Calling initcall 0xc06d0c10: ioresources_init+0x0/0x40()
initcall 0xc06d0c10: ioresources_init+0x0/0x40() returned 0.
initcall 0xc06d0c10 ran for 0 msecs: ioresources_init+0x0/0x40()
Calling initcall 0xc06d0da0: uid_cache_init+0x0/0xa0()
initcall 0xc06d0da0: uid_cache_init+0x0/0xa0() returned 0.
initcall 0xc06d0da0 ran for 0 msecs: uid_cache_init+0x0/0xa0()
Calling initcall 0xc06d12f0: init_posix_timers+0x0/0x80()
initcall 0xc06d12f0: init_posix_timers+0x0/0x80() returned 0.
initcall 0xc06d12f0 ran for 0 msecs: init_posix_timers+0x0/0x80()
Calling initcall 0xc06d1370: init_posix_cpu_timers+0x0/0x60()
initcall 0xc06d1370: init_posix_cpu_timers+0x0/0x60() returned 0. initcall 0xc06d1370 ran for 0 msecs: init_posix_cpu_timers+0x0/0x60() Calling initcall 0xc06d1490: latency_init+0x0/0x20()
initcall 0xc06d1490: latency_init+0x0/0x20() returned 0.
initcall 0xc06d1490 ran for 0 msecs: latency_init+0x0/0x20()
Calling initcall 0xc06d14b0: timekeeping_init_device+0x0/0x30()
initcall 0xc06d14b0: timekeeping_init_device+0x0/0x30() returned 0. initcall 0xc06d14b0 ran for 0 msecs: timekeeping_init_device+0x0/0x30() Calling initcall 0xc06d1650: init_clocksource_sysfs+0x0/0x50()
initcall 0xc06d1650: init_clocksource_sysfs+0x0/0x50() returned 0. initcall 0xc06d1650 ran for 0 msecs: init_clocksource_sysfs+0x0/0x50() Calling initcall 0xc06d1770: init_timer_list_procfs+0x0/0x30()
initcall 0xc06d1770: init_timer_list_procfs+0x0/0x30() returned 0. initcall 0xc06d1770 ran for 0 msecs: init_timer_list_procfs+0x0/0x30() Calling initcall 0xc06d17b0: init+0x0/0x80()
initcall 0xc06d17b0: init+0x0/0x80() returned 0.
initcall 0xc06d17b0 ran for 0 msecs: init+0x0/0x80()
Calling initcall 0xc06d1830: proc_dma_init+0x0/0x20()
initcall 0xc06d1830: proc_dma_init+0x0/0x20() returned 0.
initcall 0xc06d1830 ran for 0 msecs: proc_dma_init+0x0/0x20()
Calling initcall 0xc014ffe0: percpu_modinit+0x0/0x70()
initcall 0xc014ffe0: percpu_modinit+0x0/0x70() returned 0.
initcall 0xc014ffe0 ran for 0 msecs: percpu_modinit+0x0/0x70()
Calling initcall 0xc06d1850: kallsyms_init+0x0/0x30()
initcall 0xc06d1850: kallsyms_init+0x0/0x30() returned 0.
initcall 0xc06d1850 ran for 0 msecs: kallsyms_init+0x0/0x30()
Calling initcall 0xc06d1a20: snapshot_device_init+0x0/0x10()
initcall 0xc06d1a20: snapshot_device_init+0x0/0x10() returned 0.
initcall 0xc06d1a20 ran for 0 msecs: snapshot_device_init+0x0/0x10() Calling initcall 0xc06d1a30: ikconfig_init+0x0/0x40()
initcall 0xc06d1a30: ikconfig_init+0x0/0x40() returned 0.
initcall 0xc06d1a30 ran for 0 msecs: ikconfig_init+0x0/0x40()
Calling initcall 0xc06d1cc0: audit_init+0x0/0x110()
audit: initializing netlink socket (disabled)
audit(1182753703.820:1): initialized
initcall 0xc06d1cc0: audit_init+0x0/0x110() returned 0.
initcall 0xc06d1cc0 ran for 7 msecs: audit_init+0x0/0x110()
Calling initcall 0xc06d1ee0: utsname_sysctl_init+0x0/0x20()
initcall 0xc06d1ee0: utsname_sysctl_init+0x0/0x20() returned 0.
initcall 0xc06d1ee0 ran for 0 msecs: utsname_sysctl_init+0x0/0x20() Calling initcall 0xc06d3180: init_per_zone_pages_min+0x0/0x50()
initcall 0xc06d3180: init_per_zone_pages_min+0x0/0x50() returned 0. initcall 0xc06d3180 ran for 0 msecs: init_per_zone_pages_min+0x0/0x50() Calling initcall 0xc06d3b20: pdflush_init+0x0/0x20()
initcall 0xc06d3b20: pdflush_init+0x0/0x20() returned 0.
initcall 0xc06d3b20 ran for 0 msecs: pdflush_init+0x0/0x20()
Calling initcall 0xc06d3b70: kswapd_init+0x0/0x30()
initcall 0xc06d3b70: kswapd_init+0x0/0x30() returned 0.
initcall 0xc06d3b70 ran for 0 msecs: kswapd_init+0x0/0x30()
Calling initcall 0xc06d3ba0: setup_vmstat+0x0/0x70()
initcall 0xc06d3ba0: setup_vmstat+0x0/0x70() returned 0.
initcall 0xc06d3ba0 ran for 0 msecs: setup_vmstat+0x0/0x70()
Calling initcall 0xc06d3d00: init_emergency_pool+0x0/0x70()
highmem bounce pool size: 64 pages
initcall 0xc06d3d00: init_emergency_pool+0x0/0x70() returned 0.
initcall 0xc06d3d00 ran for 2 msecs: init_emergency_pool+0x0/0x70() Calling initcall 0xc06d3d70: procswaps_init+0x0/0x20()
initcall 0xc06d3d70: procswaps_init+0x0/0x20() returned 0.
initcall 0xc06d3d70 ran for 0 msecs: procswaps_init+0x0/0x20()
Calling initcall 0xc06d3d90: hugetlb_init+0x0/0x70()
Total HugeTLB memory allocated, 0
initcall 0xc06d3d90: hugetlb_init+0x0/0x70() returned 0.
initcall 0xc06d3d90 ran for 2 msecs: hugetlb_init+0x0/0x70()
Calling initcall 0xc06d3e40: init_tmpfs+0x0/0xd0()
initcall 0xc06d3e40: init_tmpfs+0x0/0xd0() returned 0.
initcall 0xc06d3e40 ran for 0 msecs: init_tmpfs+0x0/0xd0()
Calling initcall 0xc06d3f30: cpucache_init+0x0/0x60()
initcall 0xc06d3f30: cpucache_init+0x0/0x60() returned 0.
initcall 0xc06d3f30 ran for 0 msecs: cpucache_init+0x0/0x60()
Calling initcall 0xc06d4440: fasync_init+0x0/0x40()
initcall 0xc06d4440: fasync_init+0x0/0x40() returned 0.
initcall 0xc06d4440 ran for 0 msecs: fasync_init+0x0/0x40()
Calling initcall 0xc06d4b50: aio_setup+0x0/0x80()
initcall 0xc06d4b50: aio_setup+0x0/0x80() returned 0.
initcall 0xc06d4b50 ran for 0 msecs: aio_setup+0x0/0x80()
Calling initcall 0xc06d4d80: inotify_setup+0x0/0x10()
initcall 0xc06d4d80: inotify_setup+0x0/0x10() returned 0.
initcall 0xc06d4d80 ran for 0 msecs: inotify_setup+0x0/0x10()
Calling initcall 0xc06d4d90: inotify_user_setup+0x0/0xd0()
initcall 0xc06d4d90: inotify_user_setup+0x0/0xd0() returned 0.
initcall 0xc06d4d90 ran for 0 msecs: inotify_user_setup+0x0/0xd0() Calling initcall 0xc06d5050: init_mbcache+0x0/0x20()
initcall 0xc06d5050: init_mbcache+0x0/0x20() returned 0.
initcall 0xc06d5050 ran for 0 msecs: init_mbcache+0x0/0x20()
Calling initcall 0xc06d5070: dquot_init+0x0/0x110()
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
initcall 0xc06d5070: dquot_init+0x0/0x110() returned 0.
initcall 0xc06d5070 ran for 7 msecs: dquot_init+0x0/0x110()
Calling initcall 0xc06d5180: init_v2_quota_format+0x0/0x10()
initcall 0xc06d5180: init_v2_quota_format+0x0/0x10() returned 0.
initcall 0xc06d5180 ran for 0 msecs: init_v2_quota_format+0x0/0x10() Calling initcall 0xc06d5190: dnotify_init+0x0/0x40()
initcall 0xc06d5190: dnotify_init+0x0/0x40() returned 0.
initcall 0xc06d5190 ran for 0 msecs: dnotify_init+0x0/0x40()
Calling initcall 0xc06d55d0: init_devpts_fs+0x0/0x40()
initcall 0xc06d55d0: init_devpts_fs+0x0/0x40() returned 0.
initcall 0xc06d55d0 ran for 0 msecs: init_devpts_fs+0x0/0x40()
Calling initcall 0xc06d5610: init_ext3_fs+0x0/0x80()
initcall 0xc06d5610: init_ext3_fs+0x0/0x80() returned 0.
initcall 0xc06d5610 ran for 0 msecs: init_ext3_fs+0x0/0x80()
Calling initcall 0xc06d5760: journal_init+0x0/0xe0()
initcall 0xc06d5760: journal_init+0x0/0xe0() returned 0.
initcall 0xc06d5760 ran for 0 msecs: journal_init+0x0/0xe0()
Calling initcall 0xc06d5840: init_ext2_fs+0x0/0x80()
initcall 0xc06d5840: init_ext2_fs+0x0/0x80() returned 0.
initcall 0xc06d5840 ran for 0 msecs: init_ext2_fs+0x0/0x80()
Calling initcall 0xc06d5900: init_ramfs_fs+0x0/0x10()
initcall 0xc06d5900: init_ramfs_fs+0x0/0x10() returned 0.
initcall 0xc06d5900 ran for 0 msecs: init_ramfs_fs+0x0/0x10()
Calling initcall 0xc06d5920: init_hugetlbfs_fs+0x0/0xa0()
initcall 0xc06d5920: init_hugetlbfs_fs+0x0/0xa0() returned 0.
initcall 0xc06d5920 ran for 0 msecs: init_hugetlbfs_fs+0x0/0xa0()
Calling initcall 0xc06d59c0: init_iso9660_fs+0x0/0x70()
initcall 0xc06d59c0: init_iso9660_fs+0x0/0x70() returned 0.
initcall 0xc06d59c0 ran for 0 msecs: init_iso9660_fs+0x0/0x70()
Calling initcall 0xc06d5aa0: init_nls_cp437+0x0/0x10()
initcall 0xc06d5aa0: init_nls_cp437+0x0/0x10() returned 0.
initcall 0xc06d5aa0 ran for 0 msecs: init_nls_cp437+0x0/0x10()
Calling initcall 0xc06d5ab0: init_nls_ascii+0x0/0x10()
initcall 0xc06d5ab0: init_nls_ascii+0x0/0x10() returned 0.
initcall 0xc06d5ab0 ran for 0 msecs: init_nls_ascii+0x0/0x10()
Calling initcall 0xc06d5ac0: init_udf_fs+0x0/0x70()
initcall 0xc06d5ac0: init_udf_fs+0x0/0x70() returned 0.
initcall 0xc06d5ac0 ran for 0 msecs: init_udf_fs+0x0/0x70()
Calling initcall 0xc06d5b30: ipc_init+0x0/0x20()
initcall 0xc06d5b30: ipc_init+0x0/0x20() returned 0.
initcall 0xc06d5b30 ran for 0 msecs: ipc_init+0x0/0x20()
Calling initcall 0xc06d5da0: ipc_sysctl_init+0x0/0x20()
initcall 0xc06d5da0: ipc_sysctl_init+0x0/0x20() returned 0.
initcall 0xc06d5da0 ran for 0 msecs: ipc_sysctl_init+0x0/0x20()
Calling initcall 0xc06d5dc0: init_mqueue_fs+0x0/0xd0()
initcall 0xc06d5dc0: init_mqueue_fs+0x0/0xd0() returned 0.
initcall 0xc06d5dc0 ran for 0 msecs: init_mqueue_fs+0x0/0xd0()
Calling initcall 0xc06d5fe0: key_proc_init+0x0/0x30()
initcall 0xc06d5fe0: key_proc_init+0x0/0x30() returned 0.
initcall 0xc06d5fe0 ran for 0 msecs: key_proc_init+0x0/0x30()
Calling initcall 0xc06d61b0: selinux_nf_ip_init+0x0/0x60()
SELinux: Registering netfilter hooks
initcall 0xc06d61b0: selinux_nf_ip_init+0x0/0x60() returned 0.
initcall 0xc06d61b0 ran for 3 msecs: selinux_nf_ip_init+0x0/0x60() Calling initcall 0xc06d6380: init_sel_fs+0x0/0x60()
initcall 0xc06d6380: init_sel_fs+0x0/0x60() returned 0.
initcall 0xc06d6380 ran for 0 msecs: init_sel_fs+0x0/0x60()
Calling initcall 0xc06d63e0: selnl_init+0x0/0x50()
initcall 0xc06d63e0: selnl_init+0x0/0x50() returned 0.
initcall 0xc06d63e0 ran for 0 msecs: selnl_init+0x0/0x50()
Calling initcall 0xc06d6430: sel_netif_init+0x0/0x80()
initcall 0xc06d6430: sel_netif_init+0x0/0x80() returned 0.
initcall 0xc06d6430 ran for 0 msecs: sel_netif_init+0x0/0x80()
Calling initcall 0xc06d64b0: aurule_init+0x0/0x50()
initcall 0xc06d64b0: aurule_init+0x0/0x50() returned 0.
initcall 0xc06d64b0 ran for 0 msecs: aurule_init+0x0/0x50()
Calling initcall 0xc06d6500: crypto_algapi_init+0x0/0x10()
initcall 0xc06d6500: crypto_algapi_init+0x0/0x10() returned 0.
initcall 0xc06d6500 ran for 0 msecs: crypto_algapi_init+0x0/0x10() Calling initcall 0xc06d6530: cryptomgr_init+0x0/0x10()
initcall 0xc06d6530: cryptomgr_init+0x0/0x10() returned 0.
initcall 0xc06d6530 ran for 0 msecs: cryptomgr_init+0x0/0x10()
Calling initcall 0xc06d6540: hmac_module_init+0x0/0x10()
initcall 0xc06d6540: hmac_module_init+0x0/0x10() returned 0.
initcall 0xc06d6540 ran for 0 msecs: hmac_module_init+0x0/0x10()
Calling initcall 0xc06d6550: init+0x0/0x10()
initcall 0xc06d6550: init+0x0/0x10() returned 0.
initcall 0xc06d6550 ran for 0 msecs: init+0x0/0x10()
Calling initcall 0xc06d6560: crypto_cbc_module_init+0x0/0x10()
initcall 0xc06d6560: crypto_cbc_module_init+0x0/0x10() returned 0. initcall 0xc06d6560 ran for 0 msecs: crypto_cbc_module_init+0x0/0x10() Calling initcall 0xc06d6910: noop_init+0x0/0x10()
io scheduler noop registered
initcall 0xc06d6910: noop_init+0x0/0x10() returned 0.
initcall 0xc06d6910 ran for 2 msecs: noop_init+0x0/0x10()
Calling initcall 0xc06d6920: cfq_init+0x0/0xd0()
io scheduler cfq registered (default)
initcall 0xc06d6920: cfq_init+0x0/0xd0() returned 0.
initcall 0xc06d6920 ran for 3 msecs: cfq_init+0x0/0xd0()
Calling initcall 0xc06d6be0: audit_classes_init+0x0/0x50()
initcall 0xc06d6be0: audit_classes_init+0x0/0x50() returned 0.
initcall 0xc06d6be0 ran for 0 msecs: audit_classes_init+0x0/0x50() Calling initcall 0xc0244690: pci_init+0x0/0x30()
PCI: Linking AER extended capability on 0000:00:0b.0
PCI: Linking AER extended capability on 0000:00:0c.0
PCI: Linking AER extended capability on 0000:00:0d.0
PCI: Linking AER extended capability on 0000:00:0e.0
Boot video device is 0000:01:00.0
initcall 0xc0244690: pci_init+0x0/0x30() returned 0.
initcall 0xc0244690 ran for 32 msecs: pci_init+0x0/0x30()
Calling initcall 0xc06d72d0: pci_proc_init+0x0/0x70()
initcall 0xc06d72d0: pci_proc_init+0x0/0x70() returned 0.
initcall 0xc06d72d0 ran for 0 msecs: pci_proc_init+0x0/0x70()
Calling initcall 0xc06d7340: pcie_portdrv_init+0x0/0x60()
PCI: Setting latency timer of device 0000:00:0b.0 to 64 assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
Allocate Port Service[0000:00:0b.0:pcie03]
PCI: Setting latency timer of device 0000:00:0c.0 to 64 assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
Allocate Port Service[0000:00:0c.0:pcie03]
PCI: Setting latency timer of device 0000:00:0d.0 to 64 assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
Allocate Port Service[0000:00:0d.0:pcie03]
PCI: Setting latency timer of device 0000:00:0e.0 to 64 assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
Allocate Port Service[0000:00:0e.0:pcie03]
initcall 0xc06d7340: pcie_portdrv_init+0x0/0x60() returned 0.
initcall 0xc06d7340 ran for 62 msecs: pcie_portdrv_init+0x0/0x60() Calling initcall 0xc06d73a0: aer_service_init+0x0/0x10()
initcall 0xc06d73a0: aer_service_init+0x0/0x10() returned 0.
initcall 0xc06d73a0 ran for 0 msecs: aer_service_init+0x0/0x10()
Calling initcall 0xc06d73b0: pci_hotplug_init+0x0/0xa0()pci_hotplug: PCI Hot Plug PCI Core version: 0.5
initcall 0xc06d73b0: pci_hotplug_init+0x0/0xa0() returned 0.
initcall 0xc06d73b0 ran for 4 msecs: pci_hotplug_init+0x0/0xa0()
Calling initcall 0xc06d7460: shpcd_init+0x0/0x70()
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
initcall 0xc06d7460: shpcd_init+0x0/0x70() returned 0.
initcall 0xc06d7460 ran for 5 msecs: shpcd_init+0x0/0x70()
Calling initcall 0xc06d7700: fb_console_init+0x0/0x140()
initcall 0xc06d7700: fb_console_init+0x0/0x140() returned 0.
initcall 0xc06d7700 ran for 0 msecs: fb_console_init+0x0/0x140()
Calling initcall 0xc06d8250: vesafb_init+0x0/0x2b2()
initcall 0xc06d8250: vesafb_init+0x0/0x2b2() returned 0.
initcall 0xc06d8250 ran for 0 msecs: vesafb_init+0x0/0x2b2()
Calling initcall 0xc06d88dc: acpi_reserve_resources+0x0/0xc8()
initcall 0xc06d88dc: acpi_reserve_resources+0x0/0xc8() returned 0. initcall 0xc06d88dc ran for 0 msecs: acpi_reserve_resources+0x0/0xc8() Calling initcall 0xc06d9642: irqrouter_init_sysfs+0x0/0x33()
initcall 0xc06d9642: irqrouter_init_sysfs+0x0/0x33() returned 0.
initcall 0xc06d9642 ran for 0 msecs: irqrouter_init_sysfs+0x0/0x33() Calling initcall 0xc06da080: rand_initialize+0x0/0x30()
initcall 0xc06da080: rand_initialize+0x0/0x30() returned 0.
initcall 0xc06da080 ran for 0 msecs: rand_initialize+0x0/0x30()
Calling initcall 0xc06da110: tty_init+0x0/0x1f0()
initcall 0xc06da110: tty_init+0x0/0x1f0() returned 0.
initcall 0xc06da110 ran for 2 msecs: tty_init+0x0/0x1f0()
Calling initcall 0xc06da300: pty_init+0x0/0x220()
initcall 0xc06da300: pty_init+0x0/0x220() returned 0.
initcall 0xc06da300 ran for 0 msecs: pty_init+0x0/0x220()
Calling initcall 0xc06dab50: raw_init+0x0/0xe0()
initcall 0xc06dab50: raw_init+0x0/0xe0() returned 0.
initcall 0xc06dab50 ran for 0 msecs: raw_init+0x0/0xe0()
Calling initcall 0xc06dac30: rtc_init+0x0/0x1c0()
Real Time Clock Driver v1.12ac
initcall 0xc06dac30: rtc_init+0x0/0x1c0() returned 0.
initcall 0xc06dac30 ran for 2 msecs: rtc_init+0x0/0x1c0()
Calling initcall 0xc06dadf0: hpet_init+0x0/0x60()
initcall 0xc06dadf0: hpet_init+0x0/0x60() returned 0.
initcall 0xc06dadf0 ran for 0 msecs: hpet_init+0x0/0x60()
Calling initcall 0xc06dae50: agp_init+0x0/0x40()
Linux agpgart interface v0.102 (c) Dave Jones
initcall 0xc06dae50: agp_init+0x0/0x40() returned 0.
initcall 0xc06dae50 ran for 3 msecs: agp_init+0x0/0x40()
Calling initcall 0xc06daf00: agp_ali_init+0x0/0x30()
initcall 0xc06daf00: agp_ali_init+0x0/0x30() returned 0.
initcall 0xc06daf00 ran for 0 msecs: agp_ali_init+0x0/0x30()
Calling initcall 0xc06daf30: agp_ati_init+0x0/0x30()
initcall 0xc06daf30: agp_ati_init+0x0/0x30() returned 0.
initcall 0xc06daf30 ran for 0 msecs: agp_ati_init+0x0/0x30()
Calling initcall 0xc06daf60: agp_amdk7_init+0x0/0x30()
initcall 0xc06daf60: agp_amdk7_init+0x0/0x30() returned 0.
initcall 0xc06daf60 ran for 0 msecs: agp_amdk7_init+0x0/0x30()
Calling initcall 0xc06daf90: agp_amd64_init+0x0/0xd0()
initcall 0xc06daf90: agp_amd64_init+0x0/0xd0() returned 0.
initcall 0xc06daf90 ran for 0 msecs: agp_amd64_init+0x0/0xd0()
Calling initcall 0xc06db060: agp_efficeon_init+0x0/0x40()
initcall 0xc06db060: agp_efficeon_init+0x0/0x40() returned 0.
initcall 0xc06db060 ran for 0 msecs: agp_efficeon_init+0x0/0x40()
Calling initcall 0xc06db0a0: agp_intel_init+0x0/0x30()
initcall 0xc06db0a0: agp_intel_init+0x0/0x30() returned 0.
initcall 0xc06db0a0 ran for 0 msecs: agp_intel_init+0x0/0x30()
Calling initcall 0xc06db0d0: agp_nvidia_init+0x0/0x30()
initcall 0xc06db0d0: agp_nvidia_init+0x0/0x30() returned 0.
initcall 0xc06db0d0 ran for 0 msecs: agp_nvidia_init+0x0/0x30()
Calling initcall 0xc06db100: agp_sis_init+0x0/0x30()
initcall 0xc06db100: agp_sis_init+0x0/0x30() returned 0.
initcall 0xc06db100 ran for 0 msecs: agp_sis_init+0x0/0x30()
Calling initcall 0xc06db130: agp_serverworks_init+0x0/0x30()
initcall 0xc06db130: agp_serverworks_init+0x0/0x30() returned 0.
initcall 0xc06db130 ran for 0 msecs: agp_serverworks_init+0x0/0x30() Calling initcall 0xc06db160: agp_via_init+0x0/0x30()
initcall 0xc06db160: agp_via_init+0x0/0x30() returned 0.
initcall 0xc06db160 ran for 0 msecs: agp_via_init+0x0/0x30()
Calling initcall 0xc06db190: drm_core_init+0x0/0x140()
[drm] Initialized drm 1.1.0 20060810
initcall 0xc06db190: drm_core_init+0x0/0x140() returned 0.
initcall 0xc06db190 ran for 3 msecs: drm_core_init+0x0/0x140()
Calling initcall 0xc06db2d0: radeon_init+0x0/0x20()
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 16 [drm] Initialized radeon 1.27.0 20060524 on minor 0
initcall 0xc06db2d0: radeon_init+0x0/0x20() returned 0.
initcall 0xc06db2d0 ran for 15 msecs: radeon_init+0x0/0x20()
Calling initcall 0xc06db2f0: i810_init+0x0/0x20()
initcall 0xc06db2f0: i810_init+0x0/0x20() returned 0.
initcall 0xc06db2f0 ran for 0 msecs: i810_init+0x0/0x20()
Calling initcall 0xc06db310: i915_init+0x0/0x20()
initcall 0xc06db310: i915_init+0x0/0x20() returned 0.
initcall 0xc06db310 ran for 0 msecs: i915_init+0x0/0x20()
Calling initcall 0xc06db850: serial8250_init+0x0/0x130()
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled initcall 0xc06db850: serial8250_init+0x0/0x130() returned 0.
initcall 0xc06db850 ran for 6 msecs: serial8250_init+0x0/0x130()
Calling initcall 0xc06db980: serial8250_pnp_init+0x0/0x10()
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
initcall 0xc06db980: serial8250_pnp_init+0x0/0x10() returned 0.
initcall 0xc06db980 ran for 4 msecs: serial8250_pnp_init+0x0/0x10() Calling initcall 0xc06db990: serial8250_pci_init+0x0/0x20()
initcall 0xc06db990: serial8250_pci_init+0x0/0x20() returned 0.
initcall 0xc06db990 ran for 0 msecs: serial8250_pci_init+0x0/0x20() Calling initcall 0xc06dbf40: parport_default_proc_register+0x0/0x20() initcall 0xc06dbf40: parport_default_proc_register+0x0/0x20() returned 0. initcall 0xc06dbf40 ran for 0 msecs: parport_default_proc_register+0x0/0x20() Calling initcall 0xc06dc340: parport_pc_init+0x0/0x1d0()parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
initcall 0xc06dc340: parport_pc_init+0x0/0x1d0() returned 0.
initcall 0xc06dc340 ran for 87 msecs: parport_pc_init+0x0/0x1d0()
Calling initcall 0xc06dc660: isa_bus_init+0x0/0x40()
initcall 0xc06dc660: isa_bus_init+0x0/0x40() returned 0.
initcall 0xc06dc660 ran for 0 msecs: isa_bus_init+0x0/0x40()
Calling initcall 0xc02e2fa0: topology_sysfs_init+0x0/0x50()
initcall 0xc02e2fa0: topology_sysfs_init+0x0/0x50() returned 0.
initcall 0xc02e2fa0 ran for 0 msecs: topology_sysfs_init+0x0/0x50() Calling initcall 0xc06dc710: rd_init+0x0/0x1e0()
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize initcall 0xc06dc710: rd_init+0x0/0x1e0() returned 0.
initcall 0xc06dc710 ran for 6 msecs: rd_init+0x0/0x1e0()
Calling initcall 0xc06dceb0: cpqarray_init+0x0/0x2b0()
Compaq SMART2 Driver (v 2.6.0)
initcall 0xc06dceb0: cpqarray_init+0x0/0x2b0() returned 0.
initcall 0xc06dceb0 ran for 2 msecs: cpqarray_init+0x0/0x2b0()
Calling initcall 0xc06dd510: pkt_init+0x0/0x170()
initcall 0xc06dd510: pkt_init+0x0/0x170() returned 0.
initcall 0xc06dd510 ran for 0 msecs: pkt_init+0x0/0x170()
Calling initcall 0xc06dd680: e1000_init_module+0x0/0x90()
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
initcall 0xc06dd680: e1000_init_module+0x0/0x90() returned 0.
initcall 0xc06dd680 ran for 8 msecs: e1000_init_module+0x0/0x90()
Calling initcall 0xc06dd710: e100_init_module+0x0/0x60()
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
initcall 0xc06dd710: e100_init_module+0x0/0x60() returned 0.
initcall 0xc06dd710 ran for 8 msecs: e100_init_module+0x0/0x60()
Calling initcall 0xc06dd770: tg3_init+0x0/0x20()
initcall 0xc06dd770: tg3_init+0x0/0x20() returned 0.
initcall 0xc06dd770 ran for 0 msecs: tg3_init+0x0/0x20()
Calling initcall 0xc06dd790: skge_init_module+0x0/0x20()
initcall 0xc06dd790: skge_init_module+0x0/0x20() returned 0.
initcall 0xc06dd790 ran for 0 msecs: skge_init_module+0x0/0x20()
Calling initcall 0xc06dd7b0: rhine_init+0x0/0x90()
initcall 0xc06dd7b0: rhine_init+0x0/0x90() returned 0.
initcall 0xc06dd7b0 ran for 0 msecs: rhine_init+0x0/0x90()
Calling initcall 0xc06dd8c0: net_olddevs_init+0x0/0xa0()
initcall 0xc06dd8c0: net_olddevs_init+0x0/0xa0() returned 0.
initcall 0xc06dd8c0 ran for 0 msecs: net_olddevs_init+0x0/0xa0()
Calling initcall 0xc06dd960: loopback_init+0x0/0x10()
initcall 0xc06dd960: loopback_init+0x0/0x10() returned 0.
initcall 0xc06dd960 ran for 0 msecs: loopback_init+0x0/0x10()
Calling initcall 0xc06dd970: init_nic+0x0/0x30()forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:0a.0 to 64
forcedeth: using HIGHDMA
eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0
initcall 0xc06dd970: init_nic+0x0/0x30() returned 0.
initcall 0xc06dd970 ran for 518 msecs: init_nic+0x0/0x30()
Calling initcall 0xc06dd9a0: rtl8139_init_module+0x0/0x20()
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 18
eth1: RealTek RTL8139 at 0xf8820000, 00:c0:df:03:68:5d, IRQ 18
eth1: Identified 8139 chip type 'RTL-8139B'
initcall 0xc06dd9a0: rtl8139_init_module+0x0/0x20() returned 0.
initcall 0xc06dd9a0 ran for 23 msecs: rtl8139_init_module+0x0/0x20() Calling initcall 0xc06dd9c0: rtl8169_init_module+0x0/0x20()
initcall 0xc06dd9c0: rtl8169_init_module+0x0/0x20() returned 0.
initcall 0xc06dd9c0 ran for 0 msecs: rtl8169_init_module+0x0/0x20() Calling initcall 0xc032a130: init_netconsole+0x0/0x80()
netconsole: not configured, aborting
initcall 0xc032a130: init_netconsole+0x0/0x80() returned 0.
initcall 0xc032a130 ran for 3 msecs: init_netconsole+0x0/0x80()
Calling initcall 0xc06ddcc0: spi_transport_init+0x0/0x30()
initcall 0xc06ddcc0: spi_transport_init+0x0/0x30() returned 0.
initcall 0xc06ddcc0 ran for 0 msecs: spi_transport_init+0x0/0x30() Calling initcall 0xc06ddcf0: sas_transport_init+0x0/0xb0()
initcall 0xc06ddcf0: sas_transport_init+0x0/0xb0() returned 0.
initcall 0xc06ddcf0 ran for 0 msecs: sas_transport_init+0x0/0xb0() Calling initcall 0xc06ddda0: sas_class_init+0x0/0x40()
initcall 0xc06ddda0: sas_class_init+0x0/0x40() returned 0.
initcall 0xc06ddda0 ran for 0 msecs: sas_class_init+0x0/0x40()
Calling initcall 0xc06ddde0: ahc_linux_init+0x0/0x70()
initcall 0xc06ddde0: ahc_linux_init+0x0/0x70() returned 0.
initcall 0xc06ddde0 ran for 0 msecs: ahc_linux_init+0x0/0x70()
Calling initcall 0xc06dde50: ahd_linux_init+0x0/0x80()
initcall 0xc06dde50: ahd_linux_init+0x0/0x80() returned 0.
initcall 0xc06dde50 ran for 0 msecs: ahd_linux_init+0x0/0x80()
Calling initcall 0xc06dded0: aic94xx_init+0x0/0x150()
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
initcall 0xc06dded0: aic94xx_init+0x0/0x150() returned 0.
initcall 0xc06dded0 ran for 5 msecs: aic94xx_init+0x0/0x150()
Calling initcall 0xc06de020: init_sd+0x0/0xc0()
initcall 0xc06de020: init_sd+0x0/0xc0() returned 0.
initcall 0xc06de020 ran for 0 msecs: init_sd+0x0/0xc0()
Calling initcall 0xc06de0e0: init_sr+0x0/0x30()
initcall 0xc06de0e0: init_sr+0x0/0x30() returned 0.
initcall 0xc06de0e0 ran for 0 msecs: init_sr+0x0/0x30()
Calling initcall 0xc06de110: init_sg+0x0/0x140()
initcall 0xc06de110: init_sg+0x0/0x140() returned 0.
initcall 0xc06de110 ran for 0 msecs: init_sg+0x0/0x140()
Calling initcall 0xc06de250: init_ch_module+0x0/0xa0()
SCSI Media Changer driver v0.25
initcall 0xc06de250: init_ch_module+0x0/0xa0() returned 0.
initcall 0xc06de250 ran for 2 msecs: init_ch_module+0x0/0xa0()
Calling initcall 0xc06de370: ahci_init+0x0/0x20()
initcall 0xc06de370: ahci_init+0x0/0x20() returned 0.
initcall 0xc06de370 ran for 0 msecs: ahci_init+0x0/0x20()
Calling initcall 0xc06de390: k2_sata_init+0x0/0x20()
initcall 0xc06de390: k2_sata_init+0x0/0x20() returned 0.
initcall 0xc06de390 ran for 0 msecs: k2_sata_init+0x0/0x20()
Calling initcall 0xc06de3b0: piix_init+0x0/0x30()
initcall 0xc06de3b0: piix_init+0x0/0x30() returned 0.
initcall 0xc06de3b0 ran for 0 msecs: piix_init+0x0/0x30()
Calling initcall 0xc06de3e0: pdc_ata_init+0x0/0x20()
initcall 0xc06de3e0: pdc_ata_init+0x0/0x20() returned 0.
initcall 0xc06de3e0 ran for 0 msecs: pdc_ata_init+0x0/0x20()
Calling initcall 0xc06de400: qs_ata_init+0x0/0x20()
initcall 0xc06de400: qs_ata_init+0x0/0x20() returned 0.
initcall 0xc06de400 ran for 0 msecs: qs_ata_init+0x0/0x20()
Calling initcall 0xc06de420: sil_init+0x0/0x20()
initcall 0xc06de420: sil_init+0x0/0x20() returned 0.
initcall 0xc06de420 ran for 0 msecs: sil_init+0x0/0x20()
Calling initcall 0xc06de440: sil24_init+0x0/0x20()
initcall 0xc06de440: sil24_init+0x0/0x20() returned 0.
initcall 0xc06de440 ran for 0 msecs: sil24_init+0x0/0x20()
Calling initcall 0xc06de460: svia_init+0x0/0x20()
initcall 0xc06de460: svia_init+0x0/0x20() returned 0.
initcall 0xc06de460 ran for 0 msecs: svia_init+0x0/0x20()
Calling initcall 0xc06de480: vsc_sata_init+0x0/0x20()
initcall 0xc06de480: vsc_sata_init+0x0/0x20() returned 0.
initcall 0xc06de480 ran for 0 msecs: vsc_sata_init+0x0/0x20()
Calling initcall 0xc06de4a0: sis_init+0x0/0x20()
initcall 0xc06de4a0: sis_init+0x0/0x20() returned 0.
initcall 0xc06de4a0 ran for 0 msecs: sis_init+0x0/0x20()
Calling initcall 0xc06de4c0: pdc_sata_init+0x0/0x20()
initcall 0xc06de4c0: pdc_sata_init+0x0/0x20() returned 0.
initcall 0xc06de4c0 ran for 0 msecs: pdc_sata_init+0x0/0x20()
Calling initcall 0xc06de4e0: nv_init+0x0/0x20()
initcall 0xc06de4e0: nv_init+0x0/0x20() returned 0.
initcall 0xc06de4e0 ran for 0 msecs: nv_init+0x0/0x20()
Calling initcall 0xc06de500: uli_init+0x0/0x20()
initcall 0xc06de500: uli_init+0x0/0x20() returned 0.
initcall 0xc06de500 ran for 0 msecs: uli_init+0x0/0x20()
Calling initcall 0xc06de520: mv_init+0x0/0x20()
initcall 0xc06de520: mv_init+0x0/0x20() returned 0.
initcall 0xc06de520 ran for 0 msecs: mv_init+0x0/0x20()
Calling initcall 0xc06de540: adma_ata_init+0x0/0x20()
initcall 0xc06de540: adma_ata_init+0x0/0x20() returned 0.
initcall 0xc06de540 ran for 0 msecs: adma_ata_init+0x0/0x20()
Calling initcall 0xc06de560: ali_init+0x0/0x20()
initcall 0xc06de560: ali_init+0x0/0x20() returned 0.
initcall 0xc06de560 ran for 0 msecs: ali_init+0x0/0x20()
Calling initcall 0xc06de580: amd_init+0x0/0x20()pata_amd 0000:00:06.0: version 0.3.8
PCI: Setting latency timer of device 0000:00:06.0 to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15 ata1.00: ata_hpa_resize 1: sectors = 78177792, hpa_sectors = 78177792 ata1.00: ATA-5: MAXTOR 6L040J2, AR1.0500, max UDMA/133
ata1.00: 78177792 sectors, multi 1: LBA
ata1.01: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488 ata1.01: ATA-6: ST380011A, 3.06, max UDMA/100
ata1.01: 156301488 sectors, multi 1: LBA48
ata1.00: ata_hpa_resize 1: sectors = 78177792, hpa_sectors = 78177792 ata1.00: configured for UDMA/133
ata1.01: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488 ata1.01: configured for UDMA/100
ATA: abnormal status 0x38 on port 0x00010177
scsi 0:0:0:0: Direct-Access ATA MAXTOR 6L040J2 AR1. PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 78177792 512-byte hardware sectors (40027 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 78177792 512-byte hardware sectors (40027 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 0:0:1:0: Direct-Access ATA ST380011A 3.06 PQ: 0 ANSI: 5
sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 < sdb5 >
sd 0:0:1:0: [sdb] Attached SCSI disk
sd 0:0:1:0: Attached scsi generic sg1 type 0
initcall 0xc06de580: amd_init+0x0/0x20() returned 0.
initcall 0xc06de580 ran for 625 msecs: amd_init+0x0/0x20()
Calling initcall 0xc06de5a0: artop_init+0x0/0x20()
initcall 0xc06de5a0: artop_init+0x0/0x20() returned 0.
initcall 0xc06de5a0 ran for 0 msecs: artop_init+0x0/0x20()
Calling initcall 0xc06de5c0: atiixp_init+0x0/0x20()
initcall 0xc06de5c0: atiixp_init+0x0/0x20() returned 0.
initcall 0xc06de5c0 ran for 0 msecs: atiixp_init+0x0/0x20()
Calling initcall 0xc06de5e0: cmd64x_init+0x0/0x20()
initcall 0xc06de5e0: cmd64x_init+0x0/0x20() returned 0.
initcall 0xc06de5e0 ran for 0 msecs: cmd64x_init+0x0/0x20()
Calling initcall 0xc06de600: cs5520_init+0x0/0x20()
initcall 0xc06de600: cs5520_init+0x0/0x20() returned 0.
initcall 0xc06de600 ran for 0 msecs: cs5520_init+0x0/0x20()
Calling initcall 0xc06de620: cs5530_init+0x0/0x20()
initcall 0xc06de620: cs5530_init+0x0/0x20() returned 0.
initcall 0xc06de620 ran for 0 msecs: cs5530_init+0x0/0x20()
Calling initcall 0xc06de640: cs5535_init+0x0/0x20()
initcall 0xc06de640: cs5535_init+0x0/0x20() returned 0.
initcall 0xc06de640 ran for 0 msecs: cs5535_init+0x0/0x20()
Calling initcall 0xc06de660: cy82c693_init+0x0/0x20()
initcall 0xc06de660: cy82c693_init+0x0/0x20() returned 0.
initcall 0xc06de660 ran for 0 msecs: cy82c693_init+0x0/0x20()
Calling initcall 0xc06de680: efar_init+0x0/0x20()
initcall 0xc06de680: efar_init+0x0/0x20() returned 0.
initcall 0xc06de680 ran for 0 msecs: efar_init+0x0/0x20()
Calling initcall 0xc06de6a0: hpt36x_init+0x0/0x20()
initcall 0xc06de6a0: hpt36x_init+0x0/0x20() returned 0.
initcall 0xc06de6a0 ran for 0 msecs: hpt36x_init+0x0/0x20()
Calling initcall 0xc06de6c0: hpt37x_init+0x0/0x20()
initcall 0xc06de6c0: hpt37x_init+0x0/0x20() returned 0.
initcall 0xc06de6c0 ran for 0 msecs: hpt37x_init+0x0/0x20()
Calling initcall 0xc06de6e0: hpt3x2n_init+0x0/0x20()
initcall 0xc06de6e0: hpt3x2n_init+0x0/0x20() returned 0.
initcall 0xc06de6e0 ran for 0 msecs: hpt3x2n_init+0x0/0x20()
Calling initcall 0xc06de700: hpt3x3_init+0x0/0x20()
initcall 0xc06de700: hpt3x3_init+0x0/0x20() returned 0.
initcall 0xc06de700 ran for 0 msecs: hpt3x3_init+0x0/0x20()
Calling initcall 0xc06de720: it821x_init+0x0/0x20()
initcall 0xc06de720: it821x_init+0x0/0x20() returned 0.
initcall 0xc06de720 ran for 0 msecs: it821x_init+0x0/0x20()
Calling initcall 0xc06de740: jmicron_init+0x0/0x20()
initcall 0xc06de740: jmicron_init+0x0/0x20() returned 0.
initcall 0xc06de740 ran for 0 msecs: jmicron_init+0x0/0x20()
Calling initcall 0xc06de760: netcell_init+0x0/0x20()
initcall 0xc06de760: netcell_init+0x0/0x20() returned 0.
initcall 0xc06de760 ran for 0 msecs: netcell_init+0x0/0x20()
Calling initcall 0xc06de780: ns87410_init+0x0/0x20()
initcall 0xc06de780: ns87410_init+0x0/0x20() returned 0.
initcall 0xc06de780 ran for 0 msecs: ns87410_init+0x0/0x20()
Calling initcall 0xc06de7a0: opti_init+0x0/0x20()
initcall 0xc06de7a0: opti_init+0x0/0x20() returned 0.
initcall 0xc06de7a0 ran for 0 msecs: opti_init+0x0/0x20()
Calling initcall 0xc06de7c0: optidma_init+0x0/0x20()
initcall 0xc06de7c0: optidma_init+0x0/0x20() returned 0.
initcall 0xc06de7c0 ran for 0 msecs: optidma_init+0x0/0x20()
Calling initcall 0xc06de7e0: marvell_init+0x0/0x20()
initcall 0xc06de7e0: marvell_init+0x0/0x20() returned 0.
initcall 0xc06de7e0 ran for 0 msecs: marvell_init+0x0/0x20()
Calling initcall 0xc06de800: mpiix_init+0x0/0x20()
initcall 0xc06de800: mpiix_init+0x0/0x20() returned 0.
initcall 0xc06de800 ran for 0 msecs: mpiix_init+0x0/0x20()
Calling initcall 0xc06de820: oldpiix_init+0x0/0x20()
initcall 0xc06de820: oldpiix_init+0x0/0x20() returned 0.
initcall 0xc06de820 ran for 0 msecs: oldpiix_init+0x0/0x20()
Calling initcall 0xc06de840: pdc2027x_init+0x0/0x20()
initcall 0xc06de840: pdc2027x_init+0x0/0x20() returned 0.
initcall 0xc06de840 ran for 0 msecs: pdc2027x_init+0x0/0x20()
Calling initcall 0xc06de860: pdc202xx_init+0x0/0x20()
initcall 0xc06de860: pdc202xx_init+0x0/0x20() returned 0.
initcall 0xc06de860 ran for 0 msecs: pdc202xx_init+0x0/0x20()
Calling initcall 0xc06dea10: qdi_init+0x0/0x220()
initcall 0xc06dea10: qdi_init+0x0/0x220() returned -19.
initcall 0xc06dea10 ran for 0 msecs: qdi_init+0x0/0x220()
Calling initcall 0xc06dec30: radisys_init+0x0/0x20()
initcall 0xc06dec30: radisys_init+0x0/0x20() returned 0.
initcall 0xc06dec30 ran for 0 msecs: radisys_init+0x0/0x20()
Calling initcall 0xc06dec50: rz1000_init+0x0/0x20()
initcall 0xc06dec50: rz1000_init+0x0/0x20() returned 0.
initcall 0xc06dec50 ran for 0 msecs: rz1000_init+0x0/0x20()
Calling initcall 0xc06dec70: sc1200_init+0x0/0x20()
initcall 0xc06dec70: sc1200_init+0x0/0x20() returned 0.
initcall 0xc06dec70 ran for 0 msecs: sc1200_init+0x0/0x20()
Calling initcall 0xc06dec90: serverworks_init+0x0/0x20()
initcall 0xc06dec90: serverworks_init+0x0/0x20() returned 0.
initcall 0xc06dec90 ran for 0 msecs: serverworks_init+0x0/0x20()
Calling initcall 0xc06decb0: sil680_init+0x0/0x20()
initcall 0xc06decb0: sil680_init+0x0/0x20() returned 0.
initcall 0xc06decb0 ran for 0 msecs: sil680_init+0x0/0x20()
Calling initcall 0xc06decd0: via_init+0x0/0x20()
initcall 0xc06decd0: via_init+0x0/0x20() returned 0.
initcall 0xc06decd0 ran for 0 msecs: via_init+0x0/0x20()
Calling initcall 0xc06decf0: sl82c105_init+0x0/0x20()
initcall 0xc06decf0: sl82c105_init+0x0/0x20() returned 0.
initcall 0xc06decf0 ran for 0 msecs: sl82c105_init+0x0/0x20()
Calling initcall 0xc06ded10: winbond_init+0x0/0x260()
initcall 0xc06ded10: winbond_init+0x0/0x260() returned -19.
initcall 0xc06ded10 ran for 0 msecs: winbond_init+0x0/0x260()
Calling initcall 0xc06def70: sis_init+0x0/0x20()
initcall 0xc06def70: sis_init+0x0/0x20() returned 0.
initcall 0xc06def70 ran for 0 msecs: sis_init+0x0/0x20()
Calling initcall 0xc06def90: triflex_init+0x0/0x20()
initcall 0xc06def90: triflex_init+0x0/0x20() returned 0.
initcall 0xc06def90 ran for 0 msecs: triflex_init+0x0/0x20()
Calling initcall 0xc06defb0: ata_generic_init+0x0/0x20()
initcall 0xc06defb0: ata_generic_init+0x0/0x20() returned 0.
initcall 0xc06defb0 ran for 0 msecs: ata_generic_init+0x0/0x20()
Calling initcall 0xc06defd0: fusion_init+0x0/0xe0()
Fusion MPT base driver 3.04.04
Copyright (c) 1999-2007 LSI Logic Corporation
initcall 0xc06defd0: fusion_init+0x0/0xe0() returned 0.
initcall 0xc06defd0 ran for 6 msecs: fusion_init+0x0/0xe0()
Calling initcall 0xc06df0b0: mptspi_init+0x0/0xb0()
Fusion MPT SPI Host driver 3.04.04
initcall 0xc06df0b0: mptspi_init+0x0/0xb0() returned 0.
initcall 0xc06df0b0 ran for 3 msecs: mptspi_init+0x0/0xb0()
Calling initcall 0xc06df160: mptctl_init+0x0/0x100()
Fusion MPT misc device (ioctl) driver 3.04.04
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
initcall 0xc06df160: mptctl_init+0x0/0x100() returned 0.
initcall 0xc06df160 ran for 11 msecs: mptctl_init+0x0/0x100()
Calling initcall 0xc06df260: cdrom_init+0x0/0x10()
initcall 0xc06df260: cdrom_init+0x0/0x10() returned 0.
initcall 0xc06df260 ran for 0 msecs: cdrom_init+0x0/0x10()
Calling initcall 0xc06df3c0: nonstatic_sysfs_init+0x0/0x10()
initcall 0xc06df3c0: nonstatic_sysfs_init+0x0/0x10() returned 0.
initcall 0xc06df3c0 ran for 0 msecs: nonstatic_sysfs_init+0x0/0x10() Calling initcall 0xc06df3d0: yenta_socket_init+0x0/0x20()
initcall 0xc06df3d0: yenta_socket_init+0x0/0x20() returned 0.
initcall 0xc06df3d0 ran for 0 msecs: yenta_socket_init+0x0/0x20()
Calling initcall 0xc06df650: mon_init+0x0/0xf0()
usbmon: debugfs is not available
initcall 0xc06df650: mon_init+0x0/0xf0() returned -19.
initcall 0xc06df650 ran for 2 msecs: mon_init+0x0/0xf0()
Calling initcall 0xc06df7e0: ehci_hcd_init+0x0/0x20()
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:02.1 to 64ehci_hcd 0000:00:02.1: EHCI Host Controllerehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 19, io mem 0xfeb00000ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
initcall 0xc06df7e0: ehci_hcd_init+0x0/0x20() returned 0.
initcall 0xc06df7e0 ran for 149 msecs: ehci_hcd_init+0x0/0x20()
Calling initcall 0xc06df800: ohci_hcd_mod_init+0x0/0x50()ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:02.0 to 64ohci_hcd 0000:00:02.0: OHCI Host Controllerohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 20, io mem 0xda102000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
initcall 0xc06df800: ohci_hcd_mod_init+0x0/0x50() returned 0.
initcall 0xc06df800 ran for 190 msecs: ohci_hcd_mod_init+0x0/0x50() Calling initcall 0xc06df850: uhci_hcd_init+0x0/0xb0()
USB Universal Host Controller Interface driver v3.0
initcall 0xc06df850: uhci_hcd_init+0x0/0xb0() returned 0.
initcall 0xc06df850 ran for 4 msecs: uhci_hcd_init+0x0/0xb0()
Calling initcall 0xc06df9b0: i8042_init+0x0/0x410()
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
initcall 0xc06df9b0: i8042_init+0x0/0x410() returned 0.
initcall 0xc06df9b0 ran for 15 msecs: i8042_init+0x0/0x410()
Calling initcall 0xc06dfdc0: serport_init+0x0/0x30()
initcall 0xc06dfdc0: serport_init+0x0/0x30() returned 0.
initcall 0xc06dfdc0 ran for 0 msecs: serport_init+0x0/0x30()
Calling initcall 0xc06dff10: mousedev_init+0x0/0xd0()
mice: PS/2 mouse device common for all mice
initcall 0xc06dff10: mousedev_init+0x0/0xd0() returned 0.
initcall 0xc06dff10 ran for 3 msecs: mousedev_init+0x0/0xd0()
Calling initcall 0xc06dffe0: evdev_init+0x0/0x10()
initcall 0xc06dffe0: evdev_init+0x0/0x10() returned 0.
initcall 0xc06dffe0 ran for 0 msecs: evdev_init+0x0/0x10()
Calling initcall 0xc06dfff0: atkbd_init+0x0/0x20()
initcall 0xc06dfff0: atkbd_init+0x0/0x20() returned 0.
initcall 0xc06dfff0 ran for 0 msecs: atkbd_init+0x0/0x20()
Calling initcall 0xc06e0010: psmouse_init+0x0/0x60()
input: AT Translated Set 2 keyboard as /class/input/input0
initcall 0xc06e0010: psmouse_init+0x0/0x60() returned 0.
initcall 0xc06e0010 ran for 17 msecs: psmouse_init+0x0/0x60()
Calling initcall 0xc06e0170: md_init+0x0/0xe0()
initcall 0xc06e0170: md_init+0x0/0xe0() returned 0.
initcall 0xc06e0170 ran for 0 msecs: md_init+0x0/0xe0()
Calling initcall 0xc06e0b50: pci_eisa_init_module+0x0/0x20()
initcall 0xc06e0b50: pci_eisa_init_module+0x0/0x20() returned 0.
initcall 0xc06e0b50 ran for 0 msecs: pci_eisa_init_module+0x0/0x20() Calling initcall 0xc06e0b70: virtual_eisa_root_init+0x0/0x60()
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 4
EISA: Detected 0 cards.
initcall 0xc06e0b70: virtual_eisa_root_init+0x0/0x60() returned 0. initcall 0xc06e0b70 ran for 8 msecs: virtual_eisa_root_init+0x0/0x60() Calling initcall 0xc06e1430: hid_init+0x0/0x80()
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
initcall 0xc06e1430: hid_init+0x0/0x80() returned 0.
initcall 0xc06e1430 ran for 12 msecs: hid_init+0x0/0x80()
Calling initcall 0xc06e14d0: init_soundcore+0x0/0x60()
initcall 0xc06e14d0: init_soundcore+0x0/0x60() returned 0.
initcall 0xc06e14d0 ran for 0 msecs: init_soundcore+0x0/0x60()
Calling initcall 0xc06e1580: alsa_sound_init+0x0/0x80()
Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). initcall 0xc06e1580: alsa_sound_init+0x0/0x80() returned 0.
initcall 0xc06e1580 ran for 7 msecs: alsa_sound_init+0x0/0x80()
Calling initcall 0xc06e1780: alsa_hwdep_init+0x0/0x60()
initcall 0xc06e1780: alsa_hwdep_init+0x0/0x60() returned 0.
initcall 0xc06e1780 ran for 0 msecs: alsa_hwdep_init+0x0/0x60()
Calling initcall 0xc06e17e0: alsa_timer_init+0x0/0x170()
initcall 0xc06e17e0: alsa_timer_init+0x0/0x170() returned 0.
initcall 0xc06e17e0 ran for 0 msecs: alsa_timer_init+0x0/0x170()
Calling initcall 0xc06e1950: rtctimer_init+0x0/0x100()
initcall 0xc06e1950: rtctimer_init+0x0/0x100() returned 0.
initcall 0xc06e1950 ran for 0 msecs: rtctimer_init+0x0/0x100()
Calling initcall 0xc06e1a50: alsa_pcm_init+0x0/0x60()
initcall 0xc06e1a50: alsa_pcm_init+0x0/0x60() returned 0.
initcall 0xc06e1a50 ran for 0 msecs: alsa_pcm_init+0x0/0x60()
Calling initcall 0xc06e1ab0: snd_mem_init+0x0/0x30()
initcall 0xc06e1ab0: snd_mem_init+0x0/0x30() returned 0.
initcall 0xc06e1ab0 ran for 0 msecs: snd_mem_init+0x0/0x30()
Calling initcall 0xc06e1ae0: alsa_rawmidi_init+0x0/0xa0()
initcall 0xc06e1ae0: alsa_rawmidi_init+0x0/0xa0() returned 0.
initcall 0xc06e1ae0 ran for 0 msecs: alsa_rawmidi_init+0x0/0xa0()
Calling initcall 0xc06e1b80: alsa_mixer_oss_init+0x0/0x40()
initcall 0xc06e1b80: alsa_mixer_oss_init+0x0/0x40() returned 0.
initcall 0xc06e1b80 ran for 0 msecs: alsa_mixer_oss_init+0x0/0x40() Calling initcall 0xc06e1bc0: alsa_pcm_oss_init+0x0/0xb0()
initcall 0xc06e1bc0: alsa_pcm_oss_init+0x0/0xb0() returned 0.
initcall 0xc06e1bc0 ran for 0 msecs: alsa_pcm_oss_init+0x0/0xb0()
Calling initcall 0xc06e1c70: alsa_seq_oss_init+0x0/0x1a0()
initcall 0xc06e1c70: alsa_seq_oss_init+0x0/0x1a0() returned 0.
initcall 0xc06e1c70 ran for 0 msecs: alsa_seq_oss_init+0x0/0x1a0() Calling initcall 0xc06e2000: alsa_seq_init+0x0/0x60()
initcall 0xc06e2000: alsa_seq_init+0x0/0x60() returned 0.
initcall 0xc06e2000 ran for 0 msecs: alsa_seq_init+0x0/0x60()
Calling initcall 0xc06e22e0: alsa_seq_device_init+0x0/0x60()
initcall 0xc06e22e0: alsa_seq_device_init+0x0/0x60() returned 0.
initcall 0xc06e22e0 ran for 0 msecs: alsa_seq_device_init+0x0/0x60() Calling initcall 0xc06e2340: alsa_seq_midi_event_init+0x0/0x10()
initcall 0xc06e2340: alsa_seq_midi_event_init+0x0/0x10() returned 0. initcall 0xc06e2340 ran for 0 msecs: alsa_seq_midi_event_init+0x0/0x10() Calling initcall 0xc06e24c0: alsa_seq_dummy_init+0x0/0xd0()
initcall 0xc06e24c0: alsa_seq_dummy_init+0x0/0xd0() returned 0.
initcall 0xc06e24c0 ran for 0 msecs: alsa_seq_dummy_init+0x0/0xd0() Calling initcall 0xc06e2590: alsa_seq_midi_init+0x0/0x40()
initcall 0xc06e2590: alsa_seq_midi_init+0x0/0x40() returned 0.
initcall 0xc06e2590 ran for 0 msecs: alsa_seq_midi_init+0x0/0x40() Calling initcall 0xc06e25d0: alsa_seq_midi_emul_init+0x0/0x10()
initcall 0xc06e25d0: alsa_seq_midi_emul_init+0x0/0x10() returned 0. initcall 0xc06e25d0 ran for 0 msecs: alsa_seq_midi_emul_init+0x0/0x10() Calling initcall 0xc06e25e0: alsa_virmidi_init+0x0/0x10()
initcall 0xc06e25e0: alsa_virmidi_init+0x0/0x10() returned 0.
initcall 0xc06e25e0 ran for 0 msecs: alsa_virmidi_init+0x0/0x10()
Calling initcall 0xc06e25f0: alsa_mpu401_uart_init+0x0/0x10()
initcall 0xc06e25f0: alsa_mpu401_uart_init+0x0/0x10() returned 0. initcall 0xc06e25f0 ran for 0 msecs: alsa_mpu401_uart_init+0x0/0x10() Calling initcall 0xc06e2600: alsa_card_mpu401_init+0x0/0xe0()
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
initcall 0xc06e2600: alsa_card_mpu401_init+0x0/0xe0() returned 0. initcall 0xc06e2600 ran for 458 msecs: alsa_card_mpu401_init+0x0/0xe0() Calling initcall 0xc06e26e0: alsa_card_intel8x0_init+0x0/0x20()
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 20 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:04.0 to 64 intel8x0_measure_ac97_clock: measured 50764 usecs
intel8x0: clocking to 46859
initcall 0xc06e26e0: alsa_card_intel8x0_init+0x0/0x20() returned 0. initcall 0xc06e26e0 ran for 321 msecs: alsa_card_intel8x0_init+0x0/0x20() Calling initcall 0xc06e2700: alsa_card_via82xx_init+0x0/0x20()
initcall 0xc06e2700: alsa_card_via82xx_init+0x0/0x20() returned 0. initcall 0xc06e2700 ran for 0 msecs: alsa_card_via82xx_init+0x0/0x20() Calling initcall 0xc06e2720: alsa_ac97_init+0x0/0x10()
initcall 0xc06e2720: alsa_ac97_init+0x0/0x10() returned 0.
initcall 0xc06e2720 ran for 0 msecs: alsa_ac97_init+0x0/0x10()
Calling initcall 0xc06e2730: alsa_card_emu10k1_init+0x0/0x20()
initcall 0xc06e2730: alsa_card_emu10k1_init+0x0/0x20() returned 0. initcall 0xc06e2730 ran for 0 msecs: alsa_card_emu10k1_init+0x0/0x20() Calling initcall 0xc06e2750: alsa_emu10k1_synth_init+0x0/0x20()
initcall 0xc06e2750: alsa_emu10k1_synth_init+0x0/0x20() returned 0. initcall 0xc06e2750 ran for 0 msecs: alsa_emu10k1_synth_init+0x0/0x20() Calling initcall 0xc06e2770: alsa_card_emu10k1x_init+0x0/0x20()
initcall 0xc06e2770: alsa_card_emu10k1x_init+0x0/0x20() returned 0. initcall 0xc06e2770 ran for 0 msecs: alsa_card_emu10k1x_init+0x0/0x20() Calling initcall 0xc06e2790: alsa_card_azx_init+0x0/0x20()
initcall 0xc06e2790: alsa_card_azx_init+0x0/0x20() returned 0.
initcall 0xc06e2790 ran for 0 msecs: alsa_card_azx_init+0x0/0x20() Calling initcall 0xc06e27b0: alsa_util_mem_init+0x0/0x10()
initcall 0xc06e27b0: alsa_util_mem_init+0x0/0x10() returned 0.
initcall 0xc06e27b0 ran for 0 msecs: alsa_util_mem_init+0x0/0x10() Calling initcall 0xc06e27c0: alsa_emux_init+0x0/0x10()
initcall 0xc06e27c0: alsa_emux_init+0x0/0x10() returned 0.
initcall 0xc06e27c0 ran for 0 msecs: alsa_emux_init+0x0/0x10()
Calling initcall 0xc06e27e0: alsa_sound_last_init+0x0/0x70()
ALSA device list:
#0: NVidia CK804 with ALC850 at irq 21
#1: MPU-401 UART at 0x330, irq 10
initcall 0xc06e27e0: alsa_sound_last_init+0x0/0x70() returned 0.
initcall 0xc06e27e0 ran for 8 msecs: alsa_sound_last_init+0x0/0x70() Calling initcall 0xc06e4a10: flow_cache_init+0x0/0x1a0()
initcall 0xc06e4a10: flow_cache_init+0x0/0x1a0() returned 0.
initcall 0xc06e4a10 ran for 0 msecs: flow_cache_init+0x0/0x1a0()
Calling initcall 0xc06e4c40: llc_init+0x0/0x80()
initcall 0xc06e4c40: llc_init+0x0/0x80() returned 0.
initcall 0xc06e4c40 ran for 0 msecs: llc_init+0x0/0x80()
Calling initcall 0xc06e4cc0: snap_init+0x0/0x40()
initcall 0xc06e4cc0: snap_init+0x0/0x40() returned 0.
initcall 0xc06e4cc0 ran for 0 msecs: snap_init+0x0/0x40()
Calling initcall 0xc06e4d00: rif_init+0x0/0x70()
initcall 0xc06e4d00: rif_init+0x0/0x70() returned 0.
initcall 0xc06e4d00 ran for 0 msecs: rif_init+0x0/0x70()
Calling initcall 0xc06e4e40: blackhole_module_init+0x0/0x10()
initcall 0xc06e4e40: blackhole_module_init+0x0/0x10() returned 0. initcall 0xc06e4e40 ran for 0 msecs: blackhole_module_init+0x0/0x10() Calling initcall 0xc06e6210: init_syncookies+0x0/0x20()
initcall 0xc06e6210: init_syncookies+0x0/0x20() returned 0.
initcall 0xc06e6210 ran for 0 msecs: init_syncookies+0x0/0x20()
Calling initcall 0xc06e6230: xfrm4_beet_init+0x0/0x20()
initcall 0xc06e6230: xfrm4_beet_init+0x0/0x20() returned 0.
initcall 0xc06e6230 ran for 0 msecs: xfrm4_beet_init+0x0/0x20()
Calling initcall 0xc06e6250: xfrm4_transport_init+0x0/0x20()
initcall 0xc06e6250: xfrm4_transport_init+0x0/0x20() returned 0.
initcall 0xc06e6250 ran for 0 msecs: xfrm4_transport_init+0x0/0x20() Calling initcall 0xc06e6270: xfrm4_tunnel_init+0x0/0x20()
initcall 0xc06e6270: xfrm4_tunnel_init+0x0/0x20() returned 0.
initcall 0xc06e6270 ran for 0 msecs: xfrm4_tunnel_init+0x0/0x20()
Calling initcall 0xc04f9b30: ipv4_netfilter_init+0x0/0x10()
initcall 0xc04f9b30: ipv4_netfilter_init+0x0/0x10() returned 0.
initcall 0xc04f9b30 ran for 0 msecs: ipv4_netfilter_init+0x0/0x10() Calling initcall 0xc06e6290: inet_diag_init+0x0/0x70()
initcall 0xc06e6290: inet_diag_init+0x0/0x70() returned 0.
initcall 0xc06e6290 ran for 0 msecs: inet_diag_init+0x0/0x70()
Calling initcall 0xc06e6300: tcp_diag_init+0x0/0x10()
initcall 0xc06e6300: tcp_diag_init+0x0/0x10() returned 0.
initcall 0xc06e6300 ran for 0 msecs: tcp_diag_init+0x0/0x10()
Calling initcall 0xc06e6310: cubictcp_register+0x0/0xb0()
TCP cubic registered
initcall 0xc06e6310: cubictcp_register+0x0/0xb0() returned 0.
initcall 0xc06e6310 ran for 1 msecs: cubictcp_register+0x0/0xb0()
Calling initcall 0xc06e65b0: xfrm_user_init+0x0/0x60()
Initializing XFRM netlink socket
initcall 0xc06e65b0: xfrm_user_init+0x0/0x60() returned 0.
initcall 0xc06e65b0 ran for 2 msecs: xfrm_user_init+0x0/0x60()
Calling initcall 0xc06e6610: af_unix_init+0x0/0x80()
NET: Registered protocol family 1
initcall 0xc06e6610: af_unix_init+0x0/0x80() returned 0.
initcall 0xc06e6610 ran for 2 msecs: af_unix_init+0x0/0x80()
Calling initcall 0xc06e6690: inet6_init+0x0/0x2c0()
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
initcall 0xc06e6690: inet6_init+0x0/0x2c0() returned 0.
initcall 0xc06e6690 ran for 5 msecs: inet6_init+0x0/0x2c0()
Calling initcall 0xc06e7220: packet_init+0x0/0x60()
NET: Registered protocol family 17
initcall 0xc06e7220: packet_init+0x0/0x60() returned 0.
initcall 0xc06e7220 ran for 2 msecs: packet_init+0x0/0x60()
Calling initcall 0xc06cc840: init_lapic_nmi_sysfs+0x0/0x40()
initcall 0xc06cc840: init_lapic_nmi_sysfs+0x0/0x40() returned 0.
initcall 0xc06cc840 ran for 0 msecs: init_lapic_nmi_sysfs+0x0/0x40() Calling initcall 0xc06cc620: check_nmi_watchdog+0x0/0x1f0()
Testing NMI watchdog ... CPU#0: NMI appears to be stuck (0->0)!
CPU#1: NMI appears to be stuck (0->0)!
initcall 0xc06cc620: check_nmi_watchdog+0x0/0x1f0() returned -1.
initcall 0xc06cc620 ran for 27 msecs: check_nmi_watchdog+0x0/0x1f0() initcall at 0xc06cc620: check_nmi_watchdog+0x0/0x1f0(): returned with error code -1 Calling initcall 0xc06ccbb0: io_apic_bug_finalize+0x0/0x20()
initcall 0xc06ccbb0: io_apic_bug_finalize+0x0/0x20() returned 0.
initcall 0xc06ccbb0 ran for 0 msecs: io_apic_bug_finalize+0x0/0x20() Calling initcall 0xc06ccd00: balanced_irq_init+0x0/0x1e0()
Starting balanced_irq
Re: 2.6.22-rc3 nmi watchdog hang
hm, restoring nmi.c to the v2.6.21 state does not fix the nmi_watchdog=2 hang. I'll do a bisection run.
Ingo
PATCH 1/1 fix nmi_watchdog=2 bootup hang
Quoted 2 lines · Ingo Molnar
hm, restoring
nmi.cto the v2.6.21 state does not fix the nmi_watchdog=2 hang. I'll do a bisection run.
and after spending an hour on 15 bisection steps:
git-bisect start
git-bisect good d1be341dba5521506d9e6dccfd66179080705bea git-bisect bad a06381fec77bf88ec6c5eb6324457cb04e9ffd69 git-bisect bad 794543a236074f49a8af89ef08ef6a753e4777e5 git-bisect good 24a77daf3d80bddcece044e6dc3675e427eef3f3 git-bisect bad ea62ccd00fd0b6720b033adfc9984f31130ce195 git-bisect good 7e20ef030dde0e52dd5a57220ee82fa9facbea4e git-bisect bad f19cccf366a07e05703c90038704a3a5ffcb0607 git-bisect good 0d08e0d3a97cce22ebf80b54785e00d9b94e1add git-bisect bad 856f44ff4af6e57fdc39a8b2bec498c88438bd27 git-bisect bad f8822f42019eceed19cc6c0f985a489e17796ed8 git-bisect good 1c3d99c11c47c8a1a9ed6a46555dbf6520683c52 git-bisect good b239fb2501117bf3aeb4dd6926edd855be92333d git-bisect good 98de032b681d8a7532d44dfc66aa5c0c1c755a9d git-bisect good 42c24fa22e86365055fc931d833f26165e687c19
the winner is ...
f8822f42019eceed19cc6c0f985a489e17796ed8 is first bad commit commit f8822f42019eceed19cc6c0f985a489e17796ed8
Author: Jeremy Fitzhardinge <[email protected]>
Date: Wed May 2 19:27:14 2007 +0200
[PATCH] i386: PARAVIRT: Consistently wrap paravirt ops callsites to make them patchable
... our wonderful paravirt subsystem, honed to eternal perfection by the testing-machine x86_64 tree.
reverting -git-curr's paravirt.c, paravirt.h, smp.c and tlbflush.h to before the bad commit makes the NMI watchdog work again. Patch against -rc6 is below.
Ingo
------------------------>
Subject: [patch, 2.6.22-rc6] fix nmi_watchdog=2 bootup hang
From: Ingo Molnar <[email protected]>
nmi_watchdog=2 hangs on i386:
Calling initcall 0xc06cc620: check_nmi_watchdog+0x0/0x1f0() Testing NMI watchdog ... CPU#0: NMI appears to be stuck (0->0)! CPU#1: NMI appears to be stuck (0->0)!
initcall 0xc06cc620: check_nmi_watchdog+0x0/0x1f0() returned -1. initcall 0xc06cc620 ran for 27 msecs: check_nmi_watchdog+0x0/0x1f0() initcall at 0xc06cc620: check_nmi_watchdog+0x0/0x1f0(): returned with error code -1
Calling initcall 0xc06ccbb0: io_apic_bug_finalize+0x0/0x20() initcall 0xc06ccbb0: io_apic_bug_finalize+0x0/0x20() returned 0. initcall 0xc06ccbb0 ran for 0 msecs: io_apic_bug_finalize+0x0/0x20() Calling initcall 0xc06ccd00: balanced_irq_init+0x0/0x1e0() Starting balanced_irq
[hard hang]
bisected it down to:
git-bisect start
git-bisect good d1be341dba5521506d9e6dccfd66179080705bea git-bisect bad a06381fec77bf88ec6c5eb6324457cb04e9ffd69 git-bisect bad 794543a236074f49a8af89ef08ef6a753e4777e5 git-bisect good 24a77daf3d80bddcece044e6dc3675e427eef3f3 git-bisect bad ea62ccd00fd0b6720b033adfc9984f31130ce195 git-bisect good 7e20ef030dde0e52dd5a57220ee82fa9facbea4e git-bisect bad f19cccf366a07e05703c90038704a3a5ffcb0607 git-bisect good 0d08e0d3a97cce22ebf80b54785e00d9b94e1add git-bisect bad 856f44ff4af6e57fdc39a8b2bec498c88438bd27 git-bisect bad f8822f42019eceed19cc6c0f985a489e17796ed8 git-bisect good 1c3d99c11c47c8a1a9ed6a46555dbf6520683c52 git-bisect good b239fb2501117bf3aeb4dd6926edd855be92333d git-bisect good 98de032b681d8a7532d44dfc66aa5c0c1c755a9d git-bisect good 42c24fa22e86365055fc931d833f26165e687c19
f8822f42019eceed19cc6c0f985a489e17796ed8 is first bad commit commit f8822f42019eceed19cc6c0f985a489e17796ed8
Author: Jeremy Fitzhardinge <[email protected]>
Date: Wed May 2 19:27:14 2007 +0200
[PATCH] i386: PARAVIRT: Consistently wrap paravirt ops callsites to make them patchable
this patch reverts the code back to the last known booting version.
--- arch/i386/kernel/paravirt.c | 174 ++-------- arch/i386/kernel/smp.c | 93 +++-- include/asm-i386/paravirt.h | 718 +++++++++----------------------------------- include/asm-i386/tlbflush.h | 21 - 4 files changed, 245 insertions(+), 761 deletions(-)
arch/i386/kernel/paravirt.c +39 -135
@@ -19,7 +19,7 @@#include <linux/module.h> #include <linux/efi.h> #include <linux/bcd.h> -#include <linux/highmem.h> +#include <linux/start_kernel.h> #include <asm/bug.h> #include <asm/paravirt.h>
@@ -54,142 +54,40 @@ char *memory_setup(void)#define DEF_NATIVE (name, code) \ extern const char start_##name[], end_##name[]; \ asm("start_" #name ": " code "; end_" #name ":") - -DEF_NATIVE (irq_disable,"cli" ); -DEF_NATIVE (irq_enable,"sti" ); -DEF_NATIVE (restore_fl,"push %eax; popf" ); -DEF_NATIVE (save_fl,"pushf; pop %eax" ); +DEF_NATIVE (cli,"cli" ); +DEF_NATIVE (sti,"sti" ); +DEF_NATIVE (popf,"push %eax; popf" ); +DEF_NATIVE (pushf,"pushf; pop %eax" );DEF_NATIVE (iret,"iret" ); -DEF_NATIVE (irq_enable_sysexit,"sti; sysexit" ); -DEF_NATIVE (read_cr2,"mov %cr2, %eax" ); -DEF_NATIVE (write_cr3,"mov %eax, %cr3" ); -DEF_NATIVE (read_cr3,"mov %cr3, %eax" ); -DEF_NATIVE (clts,"clts" ); -DEF_NATIVE (read_tsc,"rdtsc" ); - -DEF_NATIVE (ud2a,"ud2a" ); - -static unsigned native_patch (u8 type,u16 clobbers,void *insns,unsigned len) -{ -const unsigned char *start, *end; -unsigned ret; - -switch (type) { -#define SITE (x) case PARAVIRT_PATCH(x): start = start_##x; end = end_##x; goto patch_site -SITE (irq_disable); -SITE (irq_enable); -SITE (restore_fl); -SITE (save_fl); -SITE (iret); -SITE (irq_enable_sysexit); -SITE (read_cr2); -SITE (read_cr3); -SITE (write_cr3); -SITE (clts); -SITE (read_tsc); -#undef SITE - - patch_site: - ret =paravirt_patch_insns (insns, len, start, end); -break ; - -case PARAVIRT_PATCH (make_pgd): -case PARAVIRT_PATCH (make_pte): -case PARAVIRT_PATCH (pgd_val): -case PARAVIRT_PATCH (pte_val): -#ifdef CONFIG_X86_PAE -case PARAVIRT_PATCH (make_pmd): -case PARAVIRT_PATCH (pmd_val): -#endif -/* These functions end up returning exactly what -they're passed, in the same registers. */ - ret =paravirt_patch_nop (); -break ; - -default : - ret =paravirt_patch_default (type, clobbers, insns, len); -break ; - } - -return ret; -} +DEF_NATIVE (sti_sysexit,"sti; sysexit" ); -unsigned paravirt_patch_nop (void ) +static const struct native_insns { -return 0 ; -} - -unsigned paravirt_patch_ignore (unsigned len) -{ -return len; -} - -unsigned paravirt_patch_call (void *target,u16 tgt_clobbers, -void *site,u16 site_clobbers, -unsigned len) -{ -unsigned char *call = site; -unsigned long delta = (unsigned long )target - (unsigned long )(call+5 ); - -if (tgt_clobbers & ~site_clobbers) -return len;/* target would clobber too much for this site */ -if (len <5 ) -return len;/* call too long for patch site */ - - *call++ =0xe8 ;/* call */ - *(unsigned long *)call = delta; - -return 5 ; -} +const char *start, *end; +} native_insns[] = { + [PARAVIRT_PATCH (irq_disable)] = { start_cli, end_cli }, + [PARAVIRT_PATCH (irq_enable)] = { start_sti, end_sti }, + [PARAVIRT_PATCH (restore_fl)] = { start_popf, end_popf }, + [PARAVIRT_PATCH (save_fl)] = { start_pushf, end_pushf }, + [PARAVIRT_PATCH (iret)] = { start_iret, end_iret }, + [PARAVIRT_PATCH (irq_enable_sysexit)] = { start_sti_sysexit, end_sti_sysexit }, +}; -unsigned paravirt_patch_jmp (void *target,void *site,unsigned len) +static unsigned native_patch (u8 type,u16 clobbers,void *insns,unsigned len) { -unsigned char *jmp = site; -unsigned long delta = (unsigned long )target - (unsigned long )(jmp+5 ); - -if (len <5 ) -return len;/* call too long for patch site */ - - *jmp++ =0xe9 ;/* jmp */ - *(unsigned long *)jmp = delta; +unsigned int insn_len; -return 5 ; -} +/* Don't touch it if we don't have a replacement */ +if (type >=ARRAY_SIZE (native_insns) || !native_insns[type].start) +return len; -unsigned paravirt_patch_default (u8 type,u16 clobbers,void *site,unsigned len) -{ -void *opfunc = *((void **)¶virt_ops + type); -unsigned ret; + insn_len = native_insns[type].end - native_insns[type].start; -if (opfunc ==NULL ) -/* If there's no function, patch it with a ud2a (BUG) */ - ret =paravirt_patch_insns (site, len, start_ud2a, end_ud2a); -else if (opfunc == paravirt_nop) -/* If the operation is a nop, then nop the callsite */ - ret =paravirt_patch_nop (); -else if (type ==PARAVIRT_PATCH (iret) || - type ==PARAVIRT_PATCH (irq_enable_sysexit)) -/* If operation requires a jmp, then jmp */ - ret =paravirt_patch_jmp (opfunc, site, len); -else -/* Otherwise call the function; assume target could -clobber any caller-save reg */ - ret =paravirt_patch_call (opfunc,CLBR_ANY , - site, clobbers, len); - -return ret; -} - -unsigned paravirt_patch_insns (void *site,unsigned len, -const char *start,const char *end) -{ -unsigned insn_len = end - start; - -if (insn_len > len || start ==NULL ) - insn_len = len; -else -memcpy (site, start, insn_len); +/* Similarly if we can't fit replacement. */ +if (len < insn_len) +return len; +memcpy (insns, native_insns[type].start, insn_len);return insn_len; }
@@ -212,7 +110,7 @@ static void native_flush_tlb_global(void__native_flush_tlb_global (); } -static void native_flush_tlb_single (unsigned long addr) +static void native_flush_tlb_single (u32 addr) {__native_flush_tlb_single (addr); }
@@ -291,7 +189,6 @@ struct paravirt_ops paravirt_ops = { .apic_read = native_apic_read, .setup_boot_clock = setup_boot_APIC_clock, .setup_secondary_clock = setup_secondary_APIC_clock, - .startup_ipi_hook = paravirt_nop, #endif .set_lazy_mode = paravirt_nop,
@@ -301,7 +198,8 @@ struct paravirt_ops paravirt_ops = { .flush_tlb_user = native_flush_tlb, .flush_tlb_kernel = native_flush_tlb_global, .flush_tlb_single = native_flush_tlb_single, - .flush_tlb_others = native_flush_tlb_others, + + .map_pt_hook = paravirt_nop, .alloc_pt = paravirt_nop, .alloc_pd = paravirt_nop,
@@ -315,9 +213,7 @@ struct paravirt_ops paravirt_ops = { .pte_update = paravirt_nop, .pte_update_defer = paravirt_nop, -#ifdef CONFIG_HIGHPTE - .kmap_atomic_pte = kmap_atomic, -#endif + .ptep_get_and_clear = native_ptep_get_and_clear, #ifdef CONFIG_X86_PAE .set_pte_atomic = native_set_pte_atomic,
@@ -342,6 +238,14 @@ struct paravirt_ops paravirt_ops = { .dup_mmap = paravirt_nop, .exit_mmap = paravirt_nop, .activate_mm = paravirt_nop, + + .startup_ipi_hook = paravirt_nop, }; -EXPORT_SYMBOL (paravirt_ops); +/* +* NOTE: CONFIG_PARAVIRT is experimental and the paravirt_ops +* semantics are subject to change. Hence we only do this +* internal-only export of this, until it gets sorted out and +* all lowlevel CPU ops used by modules are separately exported. +*/ +EXPORT_SYMBOL_GPL (paravirt_ops);
arch/i386/kernel/smp.c +54 -39
196 lines not on this page · raw message
include/asm-i386/paravirt.h +149 -569
989 lines not on this page · raw message
include/asm-i386/tlbflush.h +3 -18
@@ -79,19 +79,15 @@* - flush_tlb_range(vma, start, end) flushes a range of pages * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages * - flush_tlb_pgtables(mm, start, end) flushes a range of page tables -* - flush_tlb_others(cpumask, mm, va) flushes a TLBs on other cpus * * ..but the i386 has somewhat limited tlb flushing capabilities, * and page-granular flushes are available only on i486 and up. */ -#define TLB_FLUSH_ALL 0xffffffff - +#define TLB_FLUSH_ALL 0xffffffff#ifndef CONFIG_SMP -#include <linux/sched.h> -#define flush_tlb () __flush_tlb()#define flush_tlb_all () __flush_tlb_all()#define local_flush_tlb () __flush_tlb()
@@ -116,12 +112,7 @@ static inline void flush_tlb_range(struc __flush_tlb(); } -static inline void native_flush_tlb_others (const cpumask_t *cpumask, -struct mm_struct *mm,unsigned long va) -{ -} - -#else /* SMP */ +#else #include <asm/smp.h>
@@ -140,9 +131,6 @@ static inline void flush_tlb_range(strucflush_tlb_mm (vma->vm_mm); } -void native_flush_tlb_others (const cpumask_t *cpumask,struct mm_struct *mm, -unsigned long va); -#define TLBSTATE_OK 1#define TLBSTATE_LAZY 2
@@ -153,11 +141,8 @@ struct tlb_statechar __cacheline_padding[L1_CACHE_BYTES -8 ]; }; DECLARE_PER_CPU(struct tlb_state, cpu_tlbstate); -#endif /* SMP */ -#ifndef CONFIG_PARAVIRT -#define flush_tlb_others (mask, mm, va) \ - native_flush_tlb_others(&mask, mm, va) +#endif #define flush_tlb_kernel_range (start, end) flush_tlb_all()
Re: [patch, 2.6.22-rc6] fix nmi_watchdog=2 bootup hang
Quoted 8 lines · Ingo Molnar
the winner is ...
f8822f42019eceed19cc6c0f985a489e17796ed8is first bad commit commitf8822f42019eceed19cc6c0f985a489e17796ed8
Author: Jeremy Fitzhardinge <[email protected]>
Date: Wed May 2 19:27:14 2007 +0200[PATCH] i386: PARAVIRT: Consistently wrap paravirt ops callsites to make them patchable
and of course i'm happy to test any patch that is simpler than the brutal revert i sent.
Ingo
Re: [patch, 2.6.22-rc6] fix nmi_watchdog=2 bootup hang
Quoted 10 lines · Ingo Molnar
Quoted 7 lines · Ingo Molnar
the winner is ...
f8822f42019eceed19cc6c0f985a489e17796ed8is first bad commit commitf8822f42019eceed19cc6c0f985a489e17796ed8
Author: Jeremy Fitzhardinge <[email protected]>
Date: Wed May 2 19:27:14 2007 +0200
Quoted 4 lines
Quoted 1 line
[PATCH] i386: PARAVIRT: Consistently wrap paravirt ops callsites to make them patchable
and of course i'm happy to test any patch that is simpler than the brutal revert i sent.
wrmsrl() looks broken, dropping the upper 32bits of the value to be written. Does this help?
Björn
---
include/asm-i386/paravirt.h +1 -1
@@ -539,7 +539,7 @@ static inline int paravirt_write_msr(unsigned msr, unsigned low, unsigned high) val =paravirt_read_msr (msr, &_err); \ } while(0) -#define wrmsrl (msr,val) ((void)paravirt_write_msr(msr, val, 0)) +#define wrmsrl (msr,val) wrmsr(msr, (u32)((u64)(val)), ((u64)(val))>>32)#define wrmsr_safe (msr,a,b) paravirt_write_msr(msr, a, b)/* rdmsr with exception handling */
Re: [patch, 2.6.22-rc6] fix nmi_watchdog=2 bootup hang
Quoted 12 lines · Björn Steinbrink
Quoted 10 lines · Ingo Molnar
Quoted 7 lines · Ingo Molnar
the winner is ...
f8822f42019eceed19cc6c0f985a489e17796ed8is first bad commit commitf8822f42019eceed19cc6c0f985a489e17796ed8
Author: Jeremy Fitzhardinge <[email protected]>
Date: Wed May 2 19:27:14 2007 +0200
Quoted 8 lines
Quoted 4 lines
Quoted 2 lines
[PATCH] i386: PARAVIRT: Consistently wrap paravirt ops callsites to make them patchable
and of course i'm happy to test any patch that is simpler than the brutal revert i sent.
wrmsrl()looks broken, dropping the upper 32bits of the value to be written. Does this help?
Crap. That's embarrassing. Does it help, because it seems likely? (Esp since Ingo didn't even have CONFIG_PARAVIRT enabled, so most of his revert would have been dead code anyway.)
J
Re: [patch, 2.6.22-rc6] fix nmi_watchdog=2 bootup hang
Quoted 20 lines · Jeremy Fitzhardinge
Quoted 19 lines · Björn Steinbrink
Quoted 16 lines · Ingo Molnar
Quoted 10 lines · Ingo Molnar
the winner is ...
f8822f42019eceed19cc6c0f985a489e17796ed8is first bad commit commitf8822f42019eceed19cc6c0f985a489e17796ed8Author: Jeremy Fitzhardinge <[email protected]> Date: Wed May 2 19:27:14 2007 +0200[PATCH] i386: PARAVIRT: Consistently wrap paravirt ops callsites to make them patchable
and of course i'm happy to test any patch that is simpler than the brutal revert i sent.
Quoted 7 lines
Quoted 3 lines
wrmsrl()looks broken, dropping the upper 32bits of the value to be written. Does this help?Crap. That's embarrassing. Does it help, because it seems likely? (Esp since Ingo didn't even have
CONFIG_PARAVIRTenabled, so most of his revert would have been dead code anyway.)
He has. The config Ingo sent was for x86_64, which (AFAICT) doesn't have CONFIG_PARAVIRT, so the config was unfortunately useless. But his bootlog tells us:
Booting paravirtualized kernel on bare hardware
Björn
PATCH 1/1 fix nmi_watchdog=2 bootup hang, take #2
In reply to Björn SteinbrinkQuoted 5 lines · Björn Steinbrink
Quoted 2 lines
and of course i'm happy to test any patch that is simpler than the brutal revert i sent.
wrmsrl()looks broken, dropping the upper 32bits of the value to be written. Does this help?
this did the trick, rc6 plus your fix and the NMI watchdog works again! Thanks! I suspect other code (oprofile?) broke due to this too.
below is a tidied up patch for upstream application. Must-have for 2.6.22.
Ingo
----------------->
From: Björn Steinbrink <[email protected]>
Subject: [patch, 2.6.22-rc6] fix nmi_watchdog=2 bootup hang, take #2
wrmsrl() is broken, dropping the upper 32bits of the value to be written. This broke the NMI watchdog on AMD hardware. (and it probably broke other code too.)
--- include/asm-i386/paravirt.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/asm-i386/paravirt.h +1 -1
@@ -539,7 +539,7 @@ static inline int paravirt_write_msr(uns val =paravirt_read_msr (msr, &_err); \ } while(0) -#define wrmsrl (msr,val) ((void)paravirt_write_msr(msr, val, 0)) +#define wrmsrl (msr,val) wrmsr(msr, (u32)((u64)(val)), ((u64)(val))>>32)#define wrmsr_safe (msr,a,b) paravirt_write_msr(msr, a, b)/* rdmsr with exception handling */
Re: [patch, 2.6.22-rc6] fix nmi_watchdog=2 bootup hang
In reply to Ingo MolnarQuoted 31 lines · Ingo Molnar
Quoted 2 lines · Ingo Molnar
hm, restoring
nmi.cto the v2.6.21 state does not fix the nmi_watchdog=2 hang. I'll do a bisection run.and after spending an hour on 15 bisection steps:
git-bisect start
git-bisect goodd1be341dba5521506d9e6dccfd66179080705beagit-bisect bada06381fec77bf88ec6c5eb6324457cb04e9ffd69git-bisect bad794543a236074f49a8af89ef08ef6a753e4777e5git-bisect good24a77daf3d80bddcece044e6dc3675e427eef3f3git-bisect badea62ccd00fd0b6720b033adfc9984f31130ce195git-bisect good7e20ef030dde0e52dd5a57220ee82fa9facbea4egit-bisect badf19cccf366a07e05703c90038704a3a5ffcb0607git-bisect good0d08e0d3a97cce22ebf80b54785e00d9b94e1addgit-bisect bad856f44ff4af6e57fdc39a8b2bec498c88438bd27git-bisect badf8822f42019eceed19cc6c0f985a489e17796ed8git-bisect good1c3d99c11c47c8a1a9ed6a46555dbf6520683c52git-bisect goodb239fb2501117bf3aeb4dd6926edd855be92333dgit-bisect good98de032b681d8a7532d44dfc66aa5c0c1c755a9dgit-bisect good42c24fa22e86365055fc931d833f26165e687c19the winner is ...
f8822f42019eceed19cc6c0f985a489e17796ed8is first bad commit commitf8822f42019eceed19cc6c0f985a489e17796ed8
Author: Jeremy Fitzhardinge <[email protected]>
Date: Wed May 2 19:27:14 2007 +0200
Quoted 7 lines
[PATCH] i386: PARAVIRT: Consistently wrap paravirt ops callsites to make them patchable
... our wonderful paravirt subsystem, honed to eternal perfection by the testing-machine
x86_64tree.reverting -git-curr's
paravirt.c,paravirt.h,smp.candtlbflush.hto before the bad commit makes the NMI watchdog work again. Patch against -rc6 is below.
Er, wow. I've been running with this stuff for months without a problem. Do you have CONFIG_PARAVIRT enabled? Do you still get the hang if you boot with "noreplace-paravirt" to disable the patching?
Your revert patch seems to take out quite a lot of stuff, some unrelated to the paravirt_ops. Where did that come from?
I presume there's one bad callsite in here which is used by the nmi path more or less exclusively. Is the bug simply that it hangs if you boot with nmi_watchdog=2? ie, no other details?
Quoted 24 lines
arch/i386/kernel/smp.c +15
-2@@ -222,10 +211,30 @@ void send_IPI_mask_sequence(cpumask_t ma*/ local_irq_save (flags); +for (query_cpu =0 ; query_cpu <NR_CPUS ; ++query_cpu) {if (cpu_isset (query_cpu, mask)) { -__send_IPI_dest_field (cpu_to_logical_apicid (query_cpu), - vector); + +/* +* Wait for idle. +*/ +apic_wait_icr_idle (); + +/* +* prepare target chip field +*/ + cfg =__prepare_ICR2 (cpu_to_logical_apicid (query_cpu)); +apic_write_around (APIC_ICR2 , cfg); + +/* +* program the ICR
arch/i386/kernel/smp.c void send_IPI_mask_sequence(cpumask_t ma · line 240
Quoted 10 lines
arch/i386/kernel/smp.c +7
-0+*/ + cfg =__prepare_ICR (0 , vector); + +/* +* Send the IPI. The write to APIC_ICR fires this off. +*/ +apic_write_around (APIC_ICR , cfg); } }local_irq_restore (flags);
What's this? This isn't paravirt_ops related, is it?
J
Re: [patch, 2.6.22-rc6] fix nmi_watchdog=2 bootup hang
Quoted 39 lines · Jeremy Fitzhardinge
Quoted 38 lines · Ingo Molnar
Quoted 3 lines · Ingo Molnar
hm, restoring
nmi.cto the v2.6.21 state does not fix the nmi_watchdog=2 hang. I'll do a bisection run.and after spending an hour on 15 bisection steps:
git-bisect start
git-bisect goodd1be341dba5521506d9e6dccfd66179080705beagit-bisect bada06381fec77bf88ec6c5eb6324457cb04e9ffd69git-bisect bad794543a236074f49a8af89ef08ef6a753e4777e5git-bisect good24a77daf3d80bddcece044e6dc3675e427eef3f3git-bisect badea62ccd00fd0b6720b033adfc9984f31130ce195git-bisect good7e20ef030dde0e52dd5a57220ee82fa9facbea4egit-bisect badf19cccf366a07e05703c90038704a3a5ffcb0607git-bisect good0d08e0d3a97cce22ebf80b54785e00d9b94e1addgit-bisect bad856f44ff4af6e57fdc39a8b2bec498c88438bd27git-bisect badf8822f42019eceed19cc6c0f985a489e17796ed8git-bisect good1c3d99c11c47c8a1a9ed6a46555dbf6520683c52git-bisect goodb239fb2501117bf3aeb4dd6926edd855be92333dgit-bisect good98de032b681d8a7532d44dfc66aa5c0c1c755a9dgit-bisect good42c24fa22e86365055fc931d833f26165e687c19the winner is ...
f8822f42019eceed19cc6c0f985a489e17796ed8is first bad commit commitf8822f42019eceed19cc6c0f985a489e17796ed8Author: Jeremy Fitzhardinge <[email protected]> Date: Wed May 2 19:27:14 2007 +0200[PATCH] i386: PARAVIRT: Consistently wrap paravirt ops callsites to make them patchable
... our wonderful paravirt subsystem, honed to eternal perfection by the testing-machine
x86_64tree.
Quoted 8 lines
Quoted 4 lines
reverting -git-curr's
paravirt.c,paravirt.h,smp.candtlbflush.hto before the bad commit makes the NMI watchdog work again. Patch against -rc6 is below.Er, wow. I've been running with this stuff for months without a
problem. Do you haveCONFIG_PARAVIRTenabled? Do you still get the
hang if you boot with "noreplace-paravirt" to disable the patching?
Are you running on AMD hardware? As Intel performance counters are only 32 bits wide, the wrmsrl bug should be a non-issue at least for the NMI watchdog on Intel hardware. AMD uses 48bit wide performance counters, which are probably less happy ;-)
Björn
Quoted 1 line · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc3/2.6.22-rc3-mm1/
drivers/built-in.o: In function `ahci_port_start':/home/rusty/linux-2.6.22-rc3-mm1/drivers/ata/ahci.c:1631: undefined reference to `ahci_port_resume'
Presumably because:
# CONFIG_PM is not set
Cheers,
Rusty.
PATCH 1/1 kernel/power/disk.c: make code static
In reply to Andrew MortonQuoted 7 lines · Andrew Morton
...
Changes since 2.6.22-rc2-mm1:
...
+swsusp-remove-code-duplication-between-diskc-and-userc.patch
...
freezer/swsusp updates
...
This patch makes needlessly global code static.
---
kernel/power/disk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
kernel/power/disk.c renamed from kernel/power/disk.c.old +2 -2
@@ -45,7 +45,7 @@static int hibernation_mode =HIBERNATION_SHUTDOWN ; -struct hibernation_ops *hibernation_ops; +static struct hibernation_ops *hibernation_ops;/** * hibernation_set_ops - set the global hibernate operations
@@ -231,7 +231,7 @@* to power off or reboot. */ -void power_down (void ) +static void power_down (void ) {switch (hibernation_mode) {case HIBERNATION_TEST :
Re: [-mm patch] kernel/power/disk.c: make code static
Quoted 9 lines · Adrian Bunk
Quoted 7 lines · Andrew Morton
...
Changes since 2.6.22-rc2-mm1:
...
+swsusp-remove-code-duplication-between-diskc-and-userc.patch
...
freezer/swsusp updates
...
Quoted 3 lines
This patch makes needlessly global code static.
Signed-off-by Adrian Bunk <[email protected]>
ACK
Rafael
Quoted 28 lines
---
kernel/power/disk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)kernel/power/disk.c renamed from kernel/power/disk.c.old +2
-2@@ -45,7 +45,7 @@static int hibernation_mode =HIBERNATION_SHUTDOWN ; -struct hibernation_ops *hibernation_ops; +static struct hibernation_ops *hibernation_ops;/** * hibernation_set_ops - set the global hibernate operations @@ -231,7 +231,7 @@* to power off or reboot. */ -void power_down (void ) +static void power_down (void ) {switch (hibernation_mode) {case HIBERNATION_TEST :
Signature · 1 line
"Premature optimization is the root of all evil." - Donald Knuth
PATCH 1/1 kernel/sched{,_fair}.c: make code static
In reply to Andrew MortonThis patch makes some needlessly global code static.
---
BTW: Please don't #include C files in sched.c
kernel/sched.c | 2 +- kernel/sched_fair.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)
kernel/sched_fair.c renamed from kernel/sched_fair.c.old +2 -2
@@ -134,7 +134,7 @@return curr->load_weight * (s64)(granularity /NICE_0_LOAD ); } -unsigned long get_rq_load (struct rq *rq) +static unsigned long get_rq_load (struct rq *rq) {unsigned long load = rq->cpu_load[CPU_LOAD_IDX_MAX -1 ] +1 ;
@@ -384,7 +384,7 @@ p->exec_start =0 ; } -long div64_s (s64 divident,unsigned long divisor) +static long div64_s (s64 divident,unsigned long divisor) {u64 tmp;
kernel/sched.c renamed from kernel/sched.c.old +1 -1
@@ -564,7 +564,7 @@* if you go up 1 level, it's -10% CPU usage, if you go down 1 level * it's +10% CPU usage. */ -const int prio_to_weight[40 ] = { +static const int prio_to_weight[40 ] = {/* -20 */ 88818 ,71054 ,56843 ,45475 ,36380 ,29104 ,23283 ,18626 ,14901 ,11921 ,/* -10 */ 9537 ,7629 ,6103 ,4883 ,3906 ,3125 ,2500 ,2000 ,1600 ,1280 ,/* 0 */ NICE_0_LOAD /* 1024 */ ,
Andrew Morton
maintainerRe: [-mm patch] kernel/sched{,_fair}.c: make code static
Quoted 7 lines · On Tue, 5 Jun 2007 23:50:56 +0200 Adrian Bunk <[email protected]> wrote:
This patch makes some needlessly global code static.
Signed-off-by Adrian Bunk <[email protected]>---
BTW: Please don't #include C files in
sched.c
Yeah.
kernel/sched_fair.c line 387
Quoted 2 lines
kernel/sched_fair.c renamed from kernel/sched_fair.c.old +1
-1-long div64_s (s64 divident,unsigned long divisor) +static long div64_s (s64 divident,unsigned long divisor)
"divident" does appear to be a word, but I suspect "dividend" was intended.
Why is this function lurking in the CPU scheduler rather than in lib/somewhere.c?
Doesn't an unsigned divide give the same result as a signed one?
Re: [-mm patch] kernel/sched{,_fair}.c: make code static
Quoted 7 lines · Andrew Morton
Quoted 5 lines
Signed-off-by Adrian Bunk <[email protected]>---
BTW: Please don't #include C files in
sched.cYeah.
In this case it's not that bad. It makes the source quite a bit cleaner and avoids having to create artificial interfaces, global functions, etc. between the .o's.
Quoted 5 lines
kernel/sched_fair.c line 387
Quoted 2 lines
kernel/sched_fair.c renamed from kernel/sched_fair.c.old +1
-1-long div64_s (s64 divident,unsigned long divisor) +static long div64_s (s64 divident,unsigned long divisor)"divident" does appear to be a word, but I suspect "dividend" was intended.
yeah indeed - fixed.
Quoted 4 lines
Why is this function lurking in the CPU scheduler rather than in
lib/somewhere.c?Doesn't an unsigned divide give the same result as a signed one?
no! 0xfffffff0 / 2 is 0x7fffffff when the division is unsigned, and 7ffffff8 (== -8) when signed. On x86 the silicon only offers us unsigned 64-bit division, so we first have to make '+16' out of -16, then divide by 2, and turn the +4 into -4. (On x86_64 there's no such problem, there's an idiv and a div 64-bit instruction as well, and gcc picks the right one depending on the type of the variable.)
i think Roman has recently done a nice cleanup patch that introduces this? I'll change CFS to use that interface once it's upstream.
Ingo
Re: [-mm patch] kernel/sched{,_fair}.c: make code static
Quoted 7 lines · Ingo Molnar
Quoted 4 lines · Andrew Morton
Quoted 4 lines
Signed-off-by Adrian Bunk <[email protected]>---
Quoted 8 lines
Quoted 3 lines
Quoted 1 line
BTW: Please don't #include C files in
sched.cYeah.
In this case it's not that bad. It makes the source quite a bit cleaner and avoids having to create artificial interfaces, global functions, etc. between the .o's.
...
The idiom used in the kernel for such code is "global code and compile the files separately". The expected inclusion for a C file into the kernel is through the Makefile, and everything else is surprising when looking through the code.
"artificial interfaces" is not a problem since these are completely private interfaces you can change at any time.
Quoted 1 line
Ingo
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon SeedIngo Molnar
AppliedRe: [-mm patch] kernel/sched{,_fair}.c: make code static
In reply to Adrian BunkQuoted 3 lines · Adrian Bunk
This patch makes some needlessly global code static.
Signed-off-by Adrian Bunk <[email protected]>
thanks, applied.
Ingo
PATCH 1/1 kernel/lockdep_proc.c: make 2 functions static
In reply to Andrew MortonQuoted 7 lines · Andrew Morton
...
Changes since 2.6.22-rc2-mm1:
...
+lockstat-human-readability-tweaks.patch
...
lockstat-via-lockdep
...
This patch makes two needlessly global functions static.
---
kernel/lockdep_proc.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
kernel/lockdep_proc.c renamed from kernel/lockdep_proc.c.old +3 -3
@@ -364,7 +364,7 @@/* * sort on absolute number of contentions */ -int lock_stat_cmp (const void *l,const void *r) +static int lock_stat_cmp (const void *l,const void *r) {const struct lock_stat_data *dl = l, *dr = r;unsigned long nl, nr;
@@ -567,8 +567,8 @@return res; } -ssize_t lock_stat_write (struct file *file,const char __user *buf, -size_t count,loff_t *ppos) +static ssize_t lock_stat_write (struct file *file,const char __user *buf, +size_t count,loff_t *ppos) {struct lock_class *class;char c;
Re: [-mm patch] kernel/lockdep_proc.c: make 2 functions static
Quoted 9 lines · Adrian Bunk
Quoted 7 lines · Andrew Morton
...
Changes since 2.6.22-rc2-mm1:
...
+lockstat-human-readability-tweaks.patch
...
lockstat-via-lockdep
...
Quoted 3 lines
This patch makes two needlessly global functions static.
Signed-off-by Adrian Bunk <[email protected]>
PATCH 1/1 fs/proc/base.c: make a struct static
In reply to Andrew MortonThis patch makes the needlessly global struct proc_pid_sched_operations static.
---
fs/proc/base.c renamed from fs/proc/base.c.old +1 -1
@@ -952,7 +952,7 @@return ret; } -const struct file_operations proc_pid_sched_operations = { +static const struct file_operations proc_pid_sched_operations = { .open = sched_open, .read = seq_read, .write = sched_write,
Re: [-mm patch] fs/proc/base.c: make a struct static
Quoted 4 lines · Adrian Bunk
This patch makes the needlessly global struct
proc_pid_sched_operationsstatic.Signed-off-by Adrian Bunk <[email protected]>
thanks.
Ingo