add dm multipath rdac support
Subsystems (2)
PATCH 1/1 add dm multipath rdac support
From b8c725aa7c501ba60de0030c6ff004db9bbc1a2b Mon Sep 17 00:00:00 2001
From: Mike Christie <[email protected]>
Date: Tue, 19 Jun 2007 11:19:42 -0500
Subject: [PATCH 1/1] Add RDAC dm hw handler support
This patch from Chandra Seetharaman and updated to upstream by me, supports LSI/Engenio devices in RDAC mode. Like dm-emc
it requires userspace support. In your multipath.conf file you must have:
path_checker rdachardware_handler "1 rdac"
And you also then must have a updated multipath tools release which has rdac support.
The patch was built against 2.6.22-rc5.
Signed-off-by Chandra Seetharaman <[email protected]>
Signed-off-by Mike Christie <[email protected]>
--- drivers/md/Kconfig | 6 + drivers/md/Makefile | 2 + drivers/md/dm-mpath-rdac.c | 715 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 723 insertions(+), 0 deletions(-) create mode 100644 drivers/md/dm-mpath-rdac.c
drivers/md/Kconfig +6 -0
@@ -262,6 +262,12 @@ config DM_MULTIPATH_EMC ---help--- Multipath support for EMC CX/AX series hardware. +config DM_MULTIPATH_RDAC + tristate "LSI/Engenio RDAC multipath support (EXPERIMENTAL)" + depends on DM_MULTIPATH && BLK_DEV_DM && EXPERIMENTAL + ---help--- + Multipath support for LSI/Engenio RDAC. + config DM_DELAY tristate "I/O delaying target (EXPERIMENTAL)" depends on BLK_DEV_DM && EXPERIMENTAL
drivers/md/Makefile +2 -0
@@ -7,6 +7,7 @@ dm-mod-objs := dm.o dm-table.o dm-target.o dm-linear.o dm-stripe.o \ dm-multipath-objs := dm-hw-handler.o dm-path-selector.o dm-mpath.o dm-snapshot-objs := dm-snap.o dm-exception-store.o dm-mirror-objs := dm-log.o dm-raid1.o +dm-rdac-objs := dm-mpath-rdac.o md-mod-objs := md.o bitmap.o raid456-objs := raid5.o raid6algos.o raid6recov.o raid6tables.o \ raid6int1.o raid6int2.o raid6int4.o \
@@ -34,6 +35,7 @@ obj-$(CONFIG_DM_CRYPT) += dm-crypt.o obj-$(CONFIG_DM_DELAY) += dm-delay.o obj-$(CONFIG_DM_MULTIPATH) += dm-multipath.o dm-round-robin.o obj-$(CONFIG_DM_MULTIPATH_EMC) += dm-emc.o +obj-$(CONFIG_DM_MULTIPATH_RDAC) += dm-rdac.o obj-$(CONFIG_DM_SNAPSHOT) += dm-snapshot.o obj-$(CONFIG_DM_MIRROR) += dm-mirror.o obj-$(CONFIG_DM_ZERO) += dm-zero.o
drivers/md/dm-mpath-rdac.c new file +715 -0
715 lines not on this page · raw message
Signature · 1 line
1.5.1.2