Skip to contentSkip to conversation

Mark Levedahl's gitk patches

PATCH In review Johannes Sixt 5 participants 11 messages Jun 15, 2016

lore
Share & tools
lore
#0 lore raw

Is there a chance that we get Mark Levedahl's gitk patches into 1.5.3:

gitk - Allow specifying tabstop as other than default 8 characters.

    http://article.gmane.org/gmane.comp.version-control.git/47844

gitk - Update fontsize in patch / tree list

    http://article.gmane.org/gmane.comp.version-control.git/47845

gitk - Make selection highlight color configurable

    http://article.gmane.org/gmane.comp.version-control.git/47851

I'm mostly interested in the last one because the highlight color is also a serious issue under MinGW.

-- Hannes

#1 lore raw
Quoted 3 lines · Johannes Sixt

Is there a chance that we get Mark Levedahl's gitk patches into 1.5.3:

I found a bug in the highlight patch (the color picker updated the wrong panel in the chooser but did set the correct color), and updated the tab-stop patch to use a spin control to enforce entry of small integers only. As there is possible interest, I am sending the amended series.

Mark

#2 lore raw

PATCH 1/1 gitk - Make selection highlight color configurable

Cygwin's tk by default uses a very dark selection background color that makes the currently selected text almost unreadable. On linux, the default selection background is a light gray which is very usable. This makes the default a light gray everywhere but allows the user to configure the color as well.

---
 gitk |   26 +++++++++++++++++++++++---
 1 files changed, 23 insertions(+), 3 deletions(-)
gitk +23 -3
index 87c3690..cd9456e 100755
@@ -402,7 +402,7 @@ proc makewindow {} {
     global rowctxmenu mergemax wrapcomment
     global highlight_files gdttype
     global searchstring sstring
-    global bgcolor fgcolor bglist fglist diffcolors
+    global bgcolor fgcolor bglist fglist diffcolors selectbgcolor
     global headctxmenu
 
     menu .bar
@@ -457,15 +457,18 @@ proc makewindow {} {
     set cscroll .tf.histframe.csb
     set canv .tf.histframe.pwclist.canv
     canvas $canv \
+	-selectbackground $selectbgcolor \
 	-background $bgcolor -bd 0 \
 	-yscrollincr $linespc -yscrollcommand "scrollcanv $cscroll"
     .tf.histframe.pwclist add $canv
     set canv2 .tf.histframe.pwclist.canv2
     canvas $canv2 \
+	-selectbackground $selectbgcolor \
 	-background $bgcolor -bd 0 -yscrollincr $linespc
     .tf.histframe.pwclist add $canv2
     set canv3 .tf.histframe.pwclist.canv3
     canvas $canv3 \
+	-selectbackground $selectbgcolor \
 	-background $bgcolor -bd 0 -yscrollincr $linespc
     .tf.histframe.pwclist add $canv3
     eval .tf.histframe.pwclist sash place 0 $geometry(pwsash0)
@@ -666,6 +669,7 @@ proc makewindow {} {
     set cflist .bright.cfiles
     set indent [font measure $mainfont "nn"]
     text $cflist \
+	-selectbackground $selectbgcolor \
 	-background $bgcolor -foreground $fgcolor \
 	-font $mainfont \
 	-tabs [list $indent [expr {2 * $indent}]] \
@@ -825,7 +829,7 @@ proc savestuff {w} {
     global maxwidth showneartags
     global viewname viewfiles viewargs viewperm nextviewnum
     global cmitmode wrapcomment
-    global colors bgcolor fgcolor diffcolors
+    global colors bgcolor fgcolor diffcolors selectbgcolor
 
     if {$stuffsaved} return
     if {![winfo viewable .]} return
@@ -844,6 +848,7 @@ proc savestuff {w} {
 	puts $f [list set fgcolor $fgcolor]
 	puts $f [list set colors $colors]
 	puts $f [list set diffcolors $diffcolors]
+	puts $f [list set selectbgcolor $selectbgcolor]
 
 	puts $f "set geometry(main) [wm geometry .]"
 	puts $f "set geometry(topwidth) [winfo width .tf]"
@@ -5845,7 +5850,7 @@ proc doquit {} {
 proc doprefs {} {
     global maxwidth maxgraphpct diffopts
     global oldprefs prefstop showneartags
-    global bgcolor fgcolor ctext diffcolors
+    global bgcolor fgcolor ctext diffcolors selectbgcolor
     global uifont
 
     set top .gitkprefs
@@ -5912,6 +5917,10 @@ proc doprefs {} {
 		      "diff hunk header" \
 		      [list $ctext tag conf hunksep -foreground]]
     grid x $top.hunksepbut $top.hunksep -sticky w
+    label $top.selbgsep -padx 40 -relief sunk -background $selectbgcolor
+    button $top.selbgbut -text "Select bg" -font optionfont \
+	-command [list choosecolor selectbgcolor 0 $top.selbgsep background setselbg]
+    grid x $top.selbgbut $top.selbgsep -sticky w
 
     frame $top.buts
     button $top.buts.ok -text "OK" -command prefsok -default active
@@ -5936,6 +5945,16 @@ proc choosecolor {v vi w x cmd} {
     eval $cmd $c
 }
 
+proc setselbg {c} {
+    global bglist cflist
+    foreach w $bglist {
+	$w configure -selectbackground $c
+    }
+    $cflist tag configure highlight \
+	-background [$cflist cget -selectbackground]
+    allcanvs itemconf secsel -fill $c
+}
+
 proc setbg {c} {
     global bglist
 
@@ -6292,6 +6311,7 @@ set colors {green red blue magenta darkgrey brown orange}
 set bgcolor white
 set fgcolor black
 set diffcolors {red "#00a000" blue}
+set selectbgcolor gray85
 
 catch {source ~/.gitk}
 
Signature · 1 line
1.5.2.2.282.g9826
#3 lore raw

PATCH 1/1 gitk - Update fontsize in patch / tree list

When adjusting fontsize (using ctrl+/-), all panes except the lower right were updated. This fixes that.

---
 gitk |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)
gitk +2 -1
index cd9456e..62eefd9 100755
@@ -4695,13 +4695,14 @@ proc redisplay {} {
 }
 
 proc incrfont {inc} {
-    global mainfont textfont ctext canv phase
+    global mainfont textfont ctext canv phase cflist
     global stopped entries
     unmarkmatches
     set mainfont [lreplace $mainfont 1 1 [expr {[lindex $mainfont 1] + $inc}]]
     set textfont [lreplace $textfont 1 1 [expr {[lindex $textfont 1] + $inc}]]
     setcoords
     $ctext conf -font $textfont
+    $cflist conf -font $textfont
     $ctext tag conf filesep -font [concat $textfont bold]
     foreach e $entries {
 	$e conf -font $mainfont
Signature · 1 line
1.5.2.2.282.g9826
#4 lore raw

PATCH 1/1 gitk - Allow specifying tabstop as other than default 8 characters.

Not all projects use the convention that one tabstop = 8 characters, and a common convention is to use one tabstop = on level of indent. For such projects, using 8 characters per tabstop often shows too much whitespace per indent. This allows the user to configure the number of characters to use per tabstop.

---
 gitk |   17 +++++++++++++----
 1 files changed, 13 insertions(+), 4 deletions(-)
gitk +13 -4
index 62eefd9..06df3bb 100755
@@ -395,7 +395,7 @@ proc confirm_popup msg {
 
 proc makewindow {} {
     global canv canv2 canv3 linespc charspc ctext cflist
-    global textfont mainfont uifont
+    global textfont mainfont uifont tabstop
     global findtype findtypemenu findloc findstring fstring geometry
     global entries sha1entry sha1string sha1but
     global maincursor textcursor curtextcursor
@@ -615,6 +615,7 @@ proc makewindow {} {
     pack .bleft.mid.diff .bleft.mid.old .bleft.mid.new -side left
     set ctext .bleft.ctext
     text $ctext -background $bgcolor -foreground $fgcolor \
+	-tabs "[expr {$tabstop * $charspc}]" \
 	-state disabled -font $textfont \
 	-yscrollcommand scrolltext -wrap none
     scrollbar .bleft.sb -command "$ctext yview"
@@ -824,7 +825,7 @@ proc click {w} {
 }
 
 proc savestuff {w} {
-    global canv canv2 canv3 ctext cflist mainfont textfont uifont
+    global canv canv2 canv3 ctext cflist mainfont textfont uifont tabstop
     global stuffsaved findmergefiles maxgraphpct
     global maxwidth showneartags
     global viewname viewfiles viewargs viewperm nextviewnum
@@ -838,6 +839,7 @@ proc savestuff {w} {
 	puts $f [list set mainfont $mainfont]
 	puts $f [list set textfont $textfont]
 	puts $f [list set uifont $uifont]
+	puts $f [list set tabstop $tabstop]
 	puts $f [list set findmergefiles $findmergefiles]
 	puts $f [list set maxgraphpct $maxgraphpct]
 	puts $f [list set maxwidth $maxwidth]
@@ -4696,12 +4698,13 @@ proc redisplay {} {
 
 proc incrfont {inc} {
     global mainfont textfont ctext canv phase cflist
+    global charspc tabstop
     global stopped entries
     unmarkmatches
     set mainfont [lreplace $mainfont 1 1 [expr {[lindex $mainfont 1] + $inc}]]
     set textfont [lreplace $textfont 1 1 [expr {[lindex $textfont 1] + $inc}]]
     setcoords
-    $ctext conf -font $textfont
+    $ctext conf -font $textfont -tabs "[expr {$tabstop * $charspc}]"
     $cflist conf -font $textfont
     $ctext tag conf filesep -font [concat $textfont bold]
     foreach e $entries {
@@ -5852,7 +5855,7 @@ proc doprefs {} {
     global maxwidth maxgraphpct diffopts
     global oldprefs prefstop showneartags
     global bgcolor fgcolor ctext diffcolors selectbgcolor
-    global uifont
+    global uifont tabstop
 
     set top .gitkprefs
     set prefstop $top
@@ -5890,6 +5893,9 @@ proc doprefs {} {
     checkbutton $top.ntag.b -variable showneartags
     pack $top.ntag.b $top.ntag.l -side left
     grid x $top.ntag -sticky w
+    label $top.tabstopl -text "tabstop" -font optionfont
+    spinbox $top.tabstop -from 1 -to 20 -width 4 -textvariable tabstop
+    grid x $top.tabstopl $top.tabstop -sticky w
 
     label $top.cdisp -text "Colors: press to choose"
     $top.cdisp configure -font $uifont
@@ -5988,9 +5994,11 @@ proc prefscan {} {
 proc prefsok {} {
     global maxwidth maxgraphpct
     global oldprefs prefstop showneartags
+    global charspc ctext tabstop
 
     catch {destroy $prefstop}
     unset prefstop
+    $ctext configure -tabs "[expr {$tabstop * $charspc}]"
     if {$maxwidth != $oldprefs(maxwidth)
 	|| $maxgraphpct != $oldprefs(maxgraphpct)} {
 	redisplay
@@ -6296,6 +6304,7 @@ if {$tclencoding == {}} {
 set mainfont {Helvetica 9}
 set textfont {Courier 9}
 set uifont {Helvetica 9 bold}
+set tabstop 8
 set findmergefiles 0
 set maxgraphpct 50
 set maxwidth 16
Signature · 1 line
1.5.2.2.282.g9826
#5 lore raw

Re: [PATCH] gitk - Make selection highlight color configurable

In reply to Mark Levedahl
Quoted 5 lines · Mark Levedahl

Cygwin's tk by default uses a very dark selection background color that makes the currently selected text almost unreadable. On linux, the default selection background is a light gray which is very usable. This makes the default a light gray everywhere but allows the user to configure the color as well.

I noticed this, and also noticed that the dark color in question was in fact the default Windows selection background color. Unfortunately, wish/gitk doesn't also use the default Windows selection foreground color (white), so the result is pretty unreadable.

When playing with Git on Windows I worked around the problem by changing the selection color system-wide.

(This patch is perhaps better than making it work the "Windows way" with the right system foreground color, though, as the tag and branch markers are also pretty ugly against a dark background...)

-bcd

Signature · 1 line
*** Brian Downing <[email protected]> 
#6 lore raw
In reply to Mark Levedahl
Quoted 4 lines · Mark Levedahl

I found a bug in the highlight patch (the color picker updated the wrong panel in the chooser but did set the correct color), and updated the tab-stop patch to use a spin control to enforce entry of small integers only. As there is possible interest, I am sending the amended series.

Ah. I just pushed out a pile of patches to gitk.git including your three. Could you do an incremental patch on top of that for me?

Thanks,
Paul.

#7 lore raw

PATCH 1/1 gitk - bugfix - Update selection background colorbar in prefs dialog

The callback function was incorrectly set to update the background colorbar when updated the selection background. This did not affect the colors chosen or their use, just their presentation in the preferences dialog box.

---
 gitk |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
gitk +1 -1
index 269f9b0..c06d327 100755
@@ -7004,7 +7004,7 @@ proc doprefs {} {
     grid x $top.hunksepbut $top.hunksep -sticky w
     label $top.selbgsep -padx 40 -relief sunk -background $selectbgcolor
     button $top.selbgbut -text "Select bg" -font optionfont \
-	-command [list choosecolor selectbgcolor 0 $top.bg background setselbg]
+	-command [list choosecolor selectbgcolor 0 $top.selbgsep background setselbg]
     grid x $top.selbgbut $top.selbgsep -sticky w
 
     frame $top.buts
Signature · 1 line
1.5.2.2.282.g9826
#8 lore raw

PATCH 1/1 gitk - Use a spinbox for setting tabstop settings

The tabstop must be a smallish positive integer, and a spinbox is the accepted UI control to accomplish this limiting rather than the text entry box previously used.

---
 gitk |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
gitk +1 -1
index c06d327..2d6a6ef 100755
@@ -6972,7 +6972,7 @@ proc doprefs {} {
     pack $top.ntag.b $top.ntag.l -side left
     grid x $top.ntag -sticky w
     label $top.tabstopl -text "tabstop" -font optionfont
-    entry $top.tabstop -width 10 -textvariable tabstop
+    spinbox $top.tabstop -from 1 -to 20 -width 4 -textvariable tabstop
     grid x $top.tabstopl $top.tabstop -sticky w
 
     label $top.cdisp -text "Colors: press to choose"
Signature · 1 line
1.5.2.2.282.g9826
#9 lore raw
In reply to Paul Mackerras
Quoted 9 lines · Paul Mackerras
Quoted 4 lines · Mark Levedahl

I found a bug in the highlight patch (the color picker updated the wrong panel in the chooser but did set the correct color), and updated the tab-stop patch to use a spin control to enforce entry of small integers only. As there is possible interest, I am sending the amended series.

Ah. I just pushed out a pile of patches to gitk.git including your three. Could you do an incremental patch on top of that for me?

I took a look at differences between your gitk.git and what I have. It appears that our "proc readrefs" differ a bit.

Most notably, the global hash tagcontents is read when readrefs run in the version I have, while gitk.git version fills it lazily in showtag, where it is actually used. Because you read the refs using "show-ref -d", you do not need to do extra forks to figure out the objects referred to by the tags in your code.

I think what you have is a lot better from interactive latency point of view. I'll take the version from gitk.git and push the results out.

#10 lore raw
Quoted 8 lines · Junio C Hamano

I took a look at differences between your gitk.git and what I have. It appears that our "proc readrefs" differ a bit.

Most notably, the global hash tagcontents is read when readrefs run in the version I have, while gitk.git version fills it lazily in showtag, where it is actually used. Because you read the refs using "show-ref -d", you do not need to do extra forks to figure out the objects referred to by the tags in your code.

Yes, that was one of the many improvements I made. Basically I pulled a lot of stuff over from the 'new' branch.

Quoted 3 lines

I think what you have is a lot better from interactive latency point of view. I'll take the version from gitk.git and push the results out.

Thanks. I have now pushed out Mark Levedahl's two bug fixes as well.

Paul.