pfifo_fast priomap
Hi list,
I have a quick question about the priority mapping of tos bits. The manpage of tc-prio shows a nice table with tos bits and the band they are mapped to:
TOS Bits Means Linux Priority Band
------------------------------------------------------------
0x0 0 Normal Service 0 Best Effort 1 0x2 1 Minimize Monetary Cost 1 Filler 2 0x4 2 Maximize Reliability 0 Best Effort 1 0x6 3 mmc+mr 0 Best Effort 1 0x8 4 Maximize Throughput 2 Bulk 2 0xa 5 mmc+mt 2 Bulk 2 0xc 6 mr+mt 2 Bulk 2 0xe 7 mmc+mr+mt 2 Bulk 2 0x10 8 Minimize Delay 6 Interactive 0 0x12 9 mmc+md 6 Interactive 0 0x14 10 mr+md 6 Interactive 0 0x16 11 mmc+mr+md 6 Interactive 0 0x18 12 mt+md 4 Int. Bulk 1 0x1a 13 mmc+mt+md 4 Int. Bulk 1 0x1c 14 mr+mt+md 4 Int. Bulk 1 0x1e 15 mmc+mr+mt+md 4 Int. Bulk 1
If I read this correctly, packets with tos 0x0 would be mapped to band 1, packets with tos 0x2 would be mapped to band 2, etc etc. However, the default priomap is 1, 2, 2, 2, 1, 2, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1.
These numbers do not correspond to the numbers in the table above. Is there something I have overlooked or is the information in the above table incorrect?
Thanks for any help,
roel
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 25 lines · Roel van Meer
Hi list,
I have a quick question about the priority mapping of tos bits. The manpage of tc-prio shows a nice table with tos bits and the band they are mapped to:
TOS Bits Means Linux Priority Band
------------------------------------------------------------0x0 0 Normal Service 0 Best Effort 1 0x2 1 Minimize Monetary Cost 1 Filler 2 0x4 2 Maximize Reliability 0 Best Effort 1 0x6 3 mmc+mr 0 Best Effort 1 0x8 4 Maximize Throughput 2 Bulk 2 0xa 5 mmc+mt 2 Bulk 2 0xc 6 mr+mt 2 Bulk 2 0xe 7 mmc+mr+mt 2 Bulk 2 0x10 8 Minimize Delay 6 Interactive 0 0x12 9 mmc+md 6 Interactive 0 0x14 10 mr+md 6 Interactive 0 0x16 11 mmc+mr+md 6 Interactive 0 0x18 12 mt+md 4 Int. Bulk 1 0x1a 13 mmc+mt+md 4 Int. Bulk 1 0x1c 14 mr+mt+md 4 Int. Bulk 1 0x1e 15 mmc+mr+mt+md 4 Int. Bulk 1
Quoted 7 lines
If I read this correctly, packets with tos
0x0would be mapped to band 1, packets with tos0x2would be mapped to band 2, etc etc. However, the default priomap is 1, 2, 2, 2, 1, 2, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1.These numbers do not correspond to the numbers in the table above. Is there something I have overlooked or is the information in the above table incorrect?
The table is incorrect. If you have the kernel source handy look at:
net/ipv4.c/route.c:173, and include/linux/pkt_sched.h:17
Alternatively, look here:
http://www.stuart.id.au/russell/files/tc/doc/tc/priority.txt
http://www.stuart.id.au/russell/files/tc/doc/tc/sch_prio.txt
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc