QE Ethernet driver writes to wrong register to mask interrupts
Subsystems (2)
PATCH 1/1 QE Ethernet driver writes to wrong register to mask interrupts
The QE Ethernet driver was writing to the wrong register to mask interrupts. In ucc_geth_stop(), it was clearing UCCE instead of UCCM.
--- drivers/net/ucc_geth.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/net/ucc_geth.c +1 -1
@@ -2276,7 +2276,7 @@ static void ucc_geth_stop(struct ucc_geth_private *ugeth)phy_stop (phydev);/* Mask all interrupts */ -out_be32 (ugeth->uccf->p_ucce,0x00000000 ); +out_be32 (ugeth->uccf->p_uccm,0x00000000 );/* Clear all interrupts */ out_be32 (ugeth->uccf->p_ucce,0xffffffff );
Signature · 1 line
1.5.0.2.260.g2eb065
Quoted 2 lines
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On
Quoted 5 lines
Behalf Of Tabi Timur-B04825
Sent: Tuesday, July 10, 2007 8:51 PM
To: [email protected]; [email protected]
Cc: Tabi Timur-B04825
Subject: [PATCH] QE Ethernet driver writes to wrong register to mask
interrupts
Quoted 2 lines
The QE Ethernet driver was writing to the wrong register to mask
interrupts.
Quoted 3 lines
In
ucc_geth_stop(), it was clearing UCCE instead of UCCM.Signed-off-by Timur Tabi <[email protected]>
Jeff Garzik
AppliedQuoted 7 lines · Timur Tabi
The QE Ethernet driver was writing to the wrong register to mask interrupts. In
ucc_geth_stop(), it was clearing UCCE instead of UCCM.Signed-off-by Timur Tabi <[email protected]>--- drivers/net/ucc_geth.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
applied