Setting audio channels on ICH5 with SALSA
Setting audio channels on ICH5 with SALSA generates and: EINVAL Numbers of channels is 1. Does anyone have some ideias?? ( on ICH6 and ICH7 works well)
thanks...
Fausto Carvalho Marques Silva
More info:
Even getting the number of avaiable audio channels i get error: EINVAL Debuging gets me to:
SNDRV_PCM_HW_PARAM_CHANNELS
params->intervals[2] = {min = 2, max = 6, openmin = 0, openmax = 0, integer = 1, empty = 0}
so snd_interval_single does not get valid ...
Any help is wellcome...
Fausto Carvalho Marques Silva
Quoted 12 lines
Setting audio channels on ICH5 with SALSA generates and: EINVAL Numbers of channels is 1. Does anyone have some ideias?? ( on ICH6 and ICH7 works well)
thanks...
Fausto Carvalho Marques Silva
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Quoted 2 lines · Fausto Carvalho Marques SIlva
Quoted 2 lines
Setting audio channels on ICH5 with SALSA generates and: EINVAL Numbers of channels is 1.
The ICH5 AC97 controller does not support mono output; you must use at least a stereo stream.
Quoted 1 line
Even getting the number of avaiable audio channels i get error: EINVAL
What function did you try to use?
Quoted 4 lines
Debuging gets me to:
SNDRV_PCM_HW_PARAM_CHANNELS
params->intervals[2] = {min = 2, max = 6, ...
It supports 2, 4 or 6 channels; this is not a single value.
HTH
Clemens
Quoted 5 lines
The ICH5 AC97 controller does not support mono output; you must use at least a stereo stream.
Ok, but lets clear the thing here:
- I ussing salsa v 0.0.6
- Look at this simple code:
if ((err = snd_pcm_hw_params_set_channels (playback_handle, hw_params,
1)) < 0) {
fprintf (stderr, "cannot set channel count (%s)\n",
snd_strerror (err));
exit (1);
}
if ((err = snd_pcm_hw_params_get_channels (hw_params,&j)) < 0) {
fprintf (stderr, "cannot set channel count (%s)\n",
snd_strerror (err));
exit (1);
}when ussing alsa-lib 1.0.14 with device "hw" i get EINVAL, when ussing alsa-lib 1.0.14 with device "default" i do not get erros (set or get functions)
My alsa.conf is the installation default one.
I think the dafault device on alsa.conf is setting something the salsa-lib does not...
Any help is wellcome...
Fausto Carvalho Marques Silva
Quoted 2 lines · Fausto Carvalho Marques SIlva
I think the default device on alsa.conf is setting something the salsa-lib does not...
Yes: When the hardware does not support the sample format requested by the application, the default device automatically converts it.
Regards,
Clemens
Quoted 4 lines · Clemens Ladisch
Yes: When the hardware does not support the sample format requested by the application, the default device automatically converts it.
Ok...but is there a way to "correct" this on salsa??
Fausto Carvalho Marques Silva
At Fri, 13 Jul 2007 14:19:05 -0300,
Quoted 8 lines · Fausto Carvalho Marques SIlva
Quoted 4 lines · Clemens Ladisch
Yes: When the hardware does not support the sample format requested by the application, the default device automatically converts it.
Ok...but is there a way to "correct" this on salsa??
No. That's how SALSA gets rid of fat from its body. It supports only hw layer of ALSA-lib (e.g. equivalent with aplay -Dhw).
Do appropriate conversions in the application itself.
Takashi