iwlwifi: provide frequency to radiotap monitor not channel index
PATCH 1/1 iwlwifi: provide frequency to radiotap monitor not channel index
From: Andy Green <[email protected]>
iwlwifi wrongly provides the channel index to the radiotap header on Monitor mode. This results in tcpdump showing "6MHz" for example.
This patch arranges to send the frequency in MHz instead eg, 2437MHz
--- drivers/net/wireless/iwl-base.c | 5 ++--- drivers/net/wireless/iwlwifi.h | 2 +- 2 files changed, 3 insertions(+), 4 deletions(-)
drivers/net/wireless/iwl-base.c +2 -3
@@ -3120,7 +3120,6 @@ void iwl_handle_data_packet_monitor(struct iwl_priv *priv,* the information provided in the skb from the hardware */ s8 signal = stats->ssi;s8 noise =0 ; -u16 channel = stats->channel;int rate = stats->rate;u64 tsf = stats->mactime;
@@ -3162,8 +3161,8 @@ void iwl_handle_data_packet_monitor(struct iwl_priv *priv, iwl_rt->rt_dbmsignal = signal; iwl_rt->rt_dbmnoise = noise; -/* Convert the channel data and set the flags */ - iwl_rt->rt_channel =cpu_to_le16 (channel); +/* Convert the channel frequency and set the flags */ + iwl_rt->rt_channelMHz =cpu_to_le16 (stats->freq);if (!(phy_flags &RX_RES_PHY_FLAGS_BAND_24_MSK )) { iwl_rt->rt_chbitmask =cpu_to_le16 ((IEEE80211_CHAN_OFDM |IEEE80211_CHAN_5GHZ ));
drivers/net/wireless/iwlwifi.h +1 -1
@@ -104,7 +104,7 @@ struct iwl_rt_rx_hdr {__le64 rt_tsf;/* TSF */ u8 rt_flags;/* radiotap packet flags */ u8 rt_rate;/* rate in 500kb/s */ -__le16 rt_channel;/* channel in mHz */ +__le16 rt_channelMHz;/* channel in MHz */ __le16 rt_chbitmask;/* channel bitfield */ s8 rt_dbmsignal;/* signal in dBm, kluged to signed */ s8 rt_dbmnoise;
Signature · 1 line
1.5.2
PATCH 1/1 iwlwifi: Calculate and report noise level while associated
From: Cahill, Ben M <[email protected]>
The patch fixed the "Noise level" info from iwconfig disappeared after association bug.
--- drivers/net/wireless/iwl-4965.c | 90 +++++++++++++++++++++++++++------------ drivers/net/wireless/iwl-4965.h | 2 +- drivers/net/wireless/iwl-base.c | 2 +- drivers/net/wireless/iwl-priv.h | 6 +-- 4 files changed, 67 insertions(+), 33 deletions(-)
drivers/net/wireless/iwl-4965.c +63 -27
@@ -3459,6 +3459,43 @@ static int iwl4965_is_temp_calib_needed(struct iwl_priv *priv)return 1 ; } +/* Calculate noise level, based on measurements during network silence just +* before arriving beacon. This measurement can be done only if we know +* exactly when to expect beacons, therefore only when we're associated. */ +static void iwl4965_rx_calc_noise (struct iwl_priv *priv) +{ +struct statistics_rx_non_phy *rx_info + = &(priv->statistics.rx.general); +int num_active_rx =0 ; +int total_silence =0 ; +int bcn_silence_a = rx_info->beacon_silence_rssi_a &IN_BAND_FILTER ; +int bcn_silence_b = rx_info->beacon_silence_rssi_b &IN_BAND_FILTER ; +int bcn_silence_c = rx_info->beacon_silence_rssi_c &IN_BAND_FILTER ; + +if (bcn_silence_a) { + total_silence += bcn_silence_a; + num_active_rx++; + } +if (bcn_silence_b) { + total_silence += bcn_silence_b; + num_active_rx++; + } +if (bcn_silence_c) { + total_silence += bcn_silence_c; + num_active_rx++; + } + +/* Average among active antennas */ +if (num_active_rx) + priv->last_rx_noise = (total_silence / num_active_rx) -107 ; +else + priv->last_rx_noise =-127 ; + +IWL_DEBUG_CALIB ("inband silence a %u, b %u, c %u, dBm %d\n" , + bcn_silence_a, bcn_silence_b, bcn_silence_c, + priv->last_rx_noise); +} +void iwl_hw_rx_statistics (struct iwl_priv *priv,struct iwl_rx_mem_buffer *rxb) {struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
@@ -3485,11 +3522,14 @@ void iwl_hw_rx_statistics(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)mod_timer (&priv->statistics_periodic, jiffies +msecs_to_jiffies (REG_RECALIB_PERIOD *1000 )); -#ifdef CONFIG_IWLWIFI_SENSITIVITY if (unlikely (!(priv->status &STATUS_SCANNING )) && - (pkt->hdr.cmd ==STATISTICS_NOTIFICATION )) + (pkt->hdr.cmd ==STATISTICS_NOTIFICATION )) { +iwl4965_rx_calc_noise (priv); +#ifdef CONFIG_IWLWIFI_SENSITIVITY queue_work (priv->workqueue, &priv->sensitivity_work);#endif + } +/* If the hardware hasn't reported a change in * temperature then don't bother computing a * calibrated temperature value */
@@ -3828,46 +3868,42 @@ static void iwl4965_rx_reply_rx(struct iwl_priv *priv,/* Find max signal strength (dBm) among 3 antenna/receiver chains */ stats.ssi =iwl4965_calc_rssi (rx_start); -IWL_DEBUG_RX ("Rssi %d, TSF %llu\n" , stats.ssi, -le64_to_cpu (rx_start->timestamp)); - -/* Sensitivity algo, if used (only while associated, not scanning), -* calculates signal-to-noise ratio in dB. Use this if available, -* else calculate signal quality using only the signal strength. */ -if (priv->last_rx_snr &&iwl_is_associated (priv) && - !(priv->status &STATUS_SCANNING )) { -/* TODO: Find better noise level reference, use -* in iwl_calc_sig_qual() */ - stats.noise = stats.ssi - priv->last_rx_snr; - stats.signal =iwl_calc_sig_qual (stats.ssi,0 ); +/* Meaningful noise values are available only from beacon statistics, +* which are gathered only when associated, and indicate noise +* only for the associated network channel ... +* Ignore these noise values while scanning (other channels) */ +if (iwl_is_associated (priv) && !(priv->status &STATUS_SCANNING )) { + stats.noise = priv->last_rx_noise; + stats.signal =iwl_calc_sig_qual (stats.ssi, stats.noise); }else { + stats.noise =-127 ; stats.signal =iwl_calc_sig_qual (stats.ssi,0 ); + } -/* Reset noise values if not associated or snr not available. */ -/* Set default noise value to -127 ... this works better than -* 0 when averaging frames with/without noise info; -* measured dBm values are always negative ... using a -* negative value as the default keeps all averages -* within an s8's (used in some apps) range of negative -* values. */ - priv->last_rx_snr =0 ; +/* Reset beacon noise level if not associated. +* Use default noise value of -127 ... this works better than +* 0 when averaging frames with/without noise info; +* measured dBm values are always negative ... using a +* negative value as the default keeps all averages within +* an s8's (used in some apps) range of negative values. */ +if (!iwl_is_associated (priv)) priv->last_rx_noise =-127 ; - stats.noise =-127 ; - } -IWL_DEBUG_STATS ("Rssi %d noise %d qual %d snr db %d\n" , stats.ssi, - stats.noise, stats.signal, priv->last_rx_snr);#ifdef CONFIG_IWLWIFI_DEBUG /* TODO: Parts of iwl_report_frame are broken for 4965 */ if (iwl_debug_level & (IWL_DL_RX ))/* Set "1" to report good data frames in groups of 100 */ iwl_report_frame (priv, pkt, header,1 ); + +if (iwl_debug_level & (IWL_DL_RX |IWL_DL_STATS )) +IWL_DEBUG_RX ("Rssi %d, noise %d, qual %d, TSF %lu\n" , + stats.ssi, stats.noise, stats.signal, + (long unsigned int )le64_to_cpu (rx_start->timestamp));#endif network_packet =iwl_is_network_packet (priv, header);if (network_packet) { priv->last_rx_rssi = stats.ssi; - priv->last_rx_noise = stats.noise; priv->last_beacon_time = priv->ucode_beacon_time; priv->last_tsf =le64_to_cpu (rx_start->timestamp); }
drivers/net/wireless/iwl-4965.h +1 -1
@@ -197,7 +197,6 @@ struct iwl_lq_mngr {/* Sensitivity and chain noise calibration */ #define INITIALIZATION_VALUE 0xFFFF#define CAL_NUM_OF_BEACONS 20 -#define IN_BAND_FILTER 0xFF#define MAXIMUM_ALLOWED_PATHLOSS 15/* Param table within SENSITIVITY_CMD */
@@ -257,6 +256,7 @@ struct iwl_lq_mngr {#define CHAIN_C 2#define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4#define ALL_BAND_FILTER 0xFF00 +#define IN_BAND_FILTER 0xFF#define MIN_AVERAGE_NOISE_MAX_VALUE 0xFFFFFFFFenum iwl_false_alarm_state {
drivers/net/wireless/iwl-base.c +1 -1
@@ -3655,7 +3655,7 @@ static void iwl_rx_reply_tx(struct iwl_priv *priv,__le16 *qc =ieee80211_get_qos_ctrl (hdr);if (qc ==NULL ) { -IWL_ERROR ("BUG_ON qc is null!!!!" ); +IWL_ERROR ("BUG_ON qc is null!!!!\n" );return ; }
drivers/net/wireless/iwl-priv.h +2 -4
@@ -182,10 +182,8 @@ struct iwl_priv {u32 status;u32 config; -int quality; -int last_rx_rssi; -int last_rx_noise; -int last_rx_snr; +int last_rx_rssi;/* From Rx packet statisitics */ +int last_rx_noise;/* From beacon statistics */ struct iwl_power_mgr power_data;
Signature · 1 line
1.5.2
PATCH 1/1 iwlwifi: modify station fix
From: Tomas Winkler <[email protected]>
This patch fixes bit mask for modify station parameters. Using assignment (=) instead of adding (|). The later caused bringing parameters from previous command to the current and eventaully caused uCode error.
--- drivers/net/wireless/iwl-4965.c | 10 +++++----- drivers/net/wireless/iwl-base.c | 4 ++-- 2 files changed, 7 insertions(+), 7 deletions(-)
drivers/net/wireless/iwl-4965.c +5 -5
@@ -3759,7 +3759,7 @@ static void iwl4965_sta_modify_ps_wake(struct iwl_priv *priv, int sta_id) priv->stations[sta_id].sta.station_flags &= ~STA_FLG_PWR_SAVE_MSK ; priv->stations[sta_id].sta.station_flags_msk =STA_FLG_PWR_SAVE_MSK ; priv->stations[sta_id].sta.sta.modify_mask =0 ; - priv->stations[sta_id].sta.mode |=STA_CONTROL_MODIFY_MSK ; + priv->stations[sta_id].sta.mode =STA_CONTROL_MODIFY_MSK ;spin_unlock_irqrestore (&priv->sta_lock, lock_flags);/* assuming we are in rx flow and the lock is already locked */ iwl_send_add_station(priv, &priv->stations[sta_id].sta,
@@ -4097,9 +4097,9 @@ static void iwl_sta_modify_enable_tid_tx(struct iwl_priv *priv, int sta_id,unsigned long lock_flags;spin_lock_irqsave (&priv->sta_lock, lock_flags); - priv->stations[sta_id].sta.sta.modify_mask |=STA_MODIFY_TID_DISABLE_TX ; + priv->stations[sta_id].sta.sta.modify_mask =STA_MODIFY_TID_DISABLE_TX ; priv->stations[sta_id].sta.tid_disable_tx &=cpu_to_le32 (~(1 << tid)); - priv->stations[sta_id].sta.mode |=STA_CONTROL_MODIFY_MSK ; + priv->stations[sta_id].sta.mode =STA_CONTROL_MODIFY_MSK ;spin_unlock_irqrestore (&priv->sta_lock, lock_flags);iwl_send_add_station (priv, &priv->stations[sta_id].sta,CMD_ASYNC ); }
@@ -4556,7 +4556,7 @@ static void iwl4965_sta_modify_add_ba_tid(struct iwl_priv *priv, priv->stations[sta_id].sta.sta.modify_mask =STA_MODIFY_ADDBA_TID_MSK ; priv->stations[sta_id].sta.add_immediate_ba_tid = (u8 )tid; priv->stations[sta_id].sta.add_immediate_ba_ssn =cpu_to_le16 (ssn); - priv->stations[sta_id].sta.mode |=STA_CONTROL_MODIFY_MSK ; + priv->stations[sta_id].sta.mode =STA_CONTROL_MODIFY_MSK ;spin_unlock_irqrestore (&priv->sta_lock, lock_flags);iwl_send_add_station (priv, &priv->stations[sta_id].sta,CMD_ASYNC ); }
@@ -4570,7 +4570,7 @@ static void iwl4965_sta_modify_del_ba_tid(struct iwl_priv *priv, priv->stations[sta_id].sta.station_flags_msk =0 ; priv->stations[sta_id].sta.sta.modify_mask =STA_MODIFY_DELBA_TID_MSK ; priv->stations[sta_id].sta.remove_immediate_ba_tid = (u8 )tid; - priv->stations[sta_id].sta.mode |=STA_CONTROL_MODIFY_MSK ; + priv->stations[sta_id].sta.mode =STA_CONTROL_MODIFY_MSK ;spin_unlock_irqrestore (&priv->sta_lock, lock_flags);iwl_send_add_station (priv, &priv->stations[sta_id].sta,CMD_ASYNC ); }
drivers/net/wireless/iwl-base.c +2 -2
@@ -1405,8 +1405,8 @@ static int iwl_update_sta_key_info(struct iwl_priv *priv,memcpy (priv->stations[sta_id].sta.key.key, keyconf->key, keyconf->keylen); priv->stations[sta_id].sta.key.key_flags = key_flags; - priv->stations[sta_id].sta.sta.modify_mask |=STA_MODIFY_KEY_MASK ; - priv->stations[sta_id].sta.mode |=STA_CONTROL_MODIFY_MSK ; + priv->stations[sta_id].sta.sta.modify_mask =STA_MODIFY_KEY_MASK ; + priv->stations[sta_id].sta.mode =STA_CONTROL_MODIFY_MSK ;spin_unlock_irqrestore (&priv->sta_lock, flags);
Signature · 1 line
1.5.2
PATCH 1/1 iwlwifi: cleanup tx queue allocation
From: Tomas Winkler <[email protected]>
The following patch cleans up tx queue allocation. Change txq bd from u8* to struct iwl_tdf_frame. This allows kill txq->q.element_size and do strong type changing. Most importantly in increasing number of slots from 64 to 256 for TX queues. This is crucial for good TX performance in HT aggregation.
--- drivers/net/wireless/iwl-3945.c | 15 +++++++-------- drivers/net/wireless/iwl-4965.c | 6 +++--- drivers/net/wireless/iwl-base.c | 31 +++++++++++++++---------------- drivers/net/wireless/iwl-hw.h | 2 +- drivers/net/wireless/iwlwifi.h | 3 +-- 5 files changed, 27 insertions(+), 30 deletions(-)
drivers/net/wireless/iwl-3945.c +7 -8
@@ -842,7 +842,7 @@ static int iwl3945_tx_reset(struct iwl_priv *priv)static int iwl3945_txq_ctx_reset (struct iwl_priv *priv) {int rc; -int i, num_slots; +int txq_id, slots_num;iwl_hw_txq_ctx_free (priv);
@@ -852,13 +852,14 @@ static int iwl3945_txq_ctx_reset(struct iwl_priv *priv) goto error;/* Tx queue(s) */ -for (i =0 ; i <TFD_QUEUE_MAX ; i++) { - num_slots = - (i ==IWL_CMD_QUEUE_NUM ) ?TFD_CMD_SLOTS : +for (txq_id =0 ; txq_id <TFD_QUEUE_MAX ; txq_id++) { + slots_num = + (txq_id ==IWL_CMD_QUEUE_NUM ) ?TFD_CMD_SLOTS :TFD_TX_CMD_SLOTS ; - rc =iwl_tx_queue_init (priv, &priv->txq[i], num_slots, i); + rc =iwl_tx_queue_init (priv, &priv->txq[txq_id], slots_num, + txq_id);if (rc) { -IWL_ERROR ("Tx %d queue init failed\n" , i); +IWL_ERROR ("Tx %d queue init failed\n" , txq_id); goto error; } }
@@ -2109,8 +2110,6 @@ int iwl_hw_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq) shared_data->tx_base_ptr[txq_id] = (u32 ) txq->q.dma_addr; - txq->q.element_size =sizeof (struct iwl_tfd_frame ); -spin_lock_irqsave (&priv->lock, flags); rc =iwl_grab_restricted_access (priv);if (rc) {
drivers/net/wireless/iwl-4965.c +3 -3
@@ -366,7 +366,7 @@ static void iwl4965_kw_free(struct iwl_priv *priv)static int iwl4965_txq_ctx_reset (struct iwl_priv *priv) {int rc =0 ; -int txq_id, num_slots; +int txq_id, slots_num;unsigned long flags;iwl4965_kw_free (priv);
@@ -401,9 +401,9 @@ static int iwl4965_txq_ctx_reset(struct iwl_priv *priv)/* Tx queue(s) */ for (txq_id =0 ; txq_id < priv->hw_setting.max_queue_number; txq_id++) { - num_slots = (txq_id ==IWL_CMD_QUEUE_NUM ) ? + slots_num = (txq_id ==IWL_CMD_QUEUE_NUM ) ?TFD_CMD_SLOTS :TFD_TX_CMD_SLOTS ; - rc =iwl_tx_queue_init (priv, &priv->txq[txq_id], num_slots, + rc =iwl_tx_queue_init (priv, &priv->txq[txq_id], slots_num, txq_id);if (rc) {IWL_ERROR ("Tx %d queue init failed\n" , txq_id);
drivers/net/wireless/iwl-base.c +15 -16
@@ -179,10 +179,10 @@ static inline u8 get_next_cmd_index(struct iwl_queue *q, u32 index, int is_huge) }static int iwl_queue_init (struct iwl_priv *priv,struct iwl_queue *q, -int count,int size,u32 id) +int count,int slots_num,u32 id) { q->n_bd = count; - q->n_window = size; + q->n_window = slots_num; q->id = id; q->low_mark = q->n_window /4 ;
@@ -199,7 +199,7 @@ static int iwl_queue_init(struct iwl_priv *priv, struct iwl_queue *q, }static int iwl_tx_queue_alloc (struct iwl_priv *priv, -struct iwl_tx_queue *txq,int count,u32 id) +struct iwl_tx_queue *txq,u32 id) {struct pci_dev *dev = priv->pci_dev;
@@ -215,13 +215,12 @@ static int iwl_tx_queue_alloc(struct iwl_priv *priv, txq->txb =NULL ; txq->bd =pci_alloc_consistent (dev, -sizeof (struct iwl_tfd_frame ) *TFD_QUEUE_SIZE_MAX , +sizeof (txq->bd[0 ]) *TFD_QUEUE_SIZE_MAX , &txq->q.dma_addr); - txq->q.element_size =sizeof (struct iwl_tfd_frame );if (!txq->bd) {IWL_ERROR ("pci_alloc_consistent(%zd) failed\n" , -sizeof (txq->bd[0 ]) * count); +sizeof (txq->bd[0 ]) *TFD_QUEUE_SIZE_MAX ); goto error; } txq->q.id = id;
@@ -238,7 +237,7 @@ static int iwl_tx_queue_alloc(struct iwl_priv *priv, }int iwl_tx_queue_init (struct iwl_priv *priv, -struct iwl_tx_queue *txq,int count,u32 txq_id) +struct iwl_tx_queue *txq,int slots_num,u32 txq_id) {struct pci_dev *dev = priv->pci_dev;int len;
@@ -247,14 +246,14 @@ int iwl_tx_queue_init(struct iwl_priv *priv,/* alocate command space + one big command for scan since scan * command is very huge the system will not have two scan at the * same time */ - len =sizeof (struct iwl_cmd ) * count; + len =sizeof (struct iwl_cmd ) * slots_num;if (txq_id ==IWL_CMD_QUEUE_NUM ); len +=IWL_MAX_SCAN_SIZE ; txq->cmd =pci_alloc_consistent (dev, len, &txq->dma_addr_cmd);if (!txq->cmd)return -ENOMEM ; - rc =iwl_tx_queue_alloc (priv, txq, count, txq_id); + rc =iwl_tx_queue_alloc (priv, txq, txq_id);if (rc) {pci_free_consistent (dev, len, txq->cmd, txq->dma_addr_cmd);
@@ -262,7 +261,7 @@ int iwl_tx_queue_init(struct iwl_priv *priv, } txq->need_update =0 ; -iwl_queue_init (priv, &txq->q,TFD_QUEUE_SIZE_MAX , count, txq_id); +iwl_queue_init (priv, &txq->q,TFD_QUEUE_SIZE_MAX , slots_num, txq_id);iwl_hw_tx_queue_init (priv, txq);return 0 ;
@@ -551,7 +550,7 @@ static int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) {struct iwl_tx_queue *txq = &priv->txq[IWL_CMD_QUEUE_NUM ];struct iwl_queue *q = &txq->q; -u8 *tfd; +struct iwl_tfd_frame *tfd;u32 *control_flags;struct iwl_cmd *out_cmd;u32 idx =0 ;
@@ -573,8 +572,8 @@ static int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)IWL_ERROR ("No space for Tx\n" );return -ENOSPC ; } - tfd = &txq->bd[q->first_empty * q->element_size]; -memset (tfd,0 , q->element_size); + tfd = &txq->bd[q->first_empty]; +memset (tfd,0 ,sizeof (*tfd)); control_flags = (u32 *) tfd;
@@ -2754,7 +2753,7 @@ static int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb, struct ieee80211_tx_control *ctl) { struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; -u8 *tfd; +struct iwl_tfd_frame *tfd;u32 *control_flags;int txq_id = ctl->queue;struct iwl_tx_queue *txq =NULL ;
@@ -2845,8 +2844,8 @@ static int iwl_tx_skb(struct iwl_priv *priv, q = &txq->q;spin_lock_irqsave (&priv->lock, flags); - tfd = (u8 *) (&txq->bd[q->first_empty * q->element_size]); -memset (tfd,0 , q->element_size); + tfd = &txq->bd[q->first_empty]; +memset (tfd,0 ,sizeof (*tfd)); control_flags = (u32 *) tfd; idx =get_next_cmd_index (q, q->first_empty,0 );
drivers/net/wireless/iwl-hw.h +1 -1
@@ -1231,7 +1231,7 @@ struct statistics {#define TFD_CTL_PAD_SET (n) (n<<28)#define TFD_CTL_PAD_GET (ctl) (ctl>>28) -#define TFD_TX_CMD_SLOTS 64 +#define TFD_TX_CMD_SLOTS 256#define TFD_CMD_SLOTS 32#define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_cmd) - \
drivers/net/wireless/iwlwifi.h +1 -2
@@ -134,7 +134,6 @@ struct iwl_queue {dma_addr_t dma_addr;/* physical addr for BD's */ int n_window;/* safe queue window */ u32 id; -u32 element_size;int low_mark;/* low watermark, resume queue if free * space more than this */ int high_mark;/* high watermark, stop queue if free
@@ -157,7 +156,7 @@ struct iwl_tx_info {*/ struct iwl_tx_queue {struct iwl_queue q; -u8 *bd; +struct iwl_tfd_frame *bd;struct iwl_cmd *cmd;dma_addr_t dma_addr_cmd;struct iwl_tx_info *txb;
Signature · 1 line
1.5.2
PATCH 1/1 iwlwifi: rxon filter_flags endianity fix
From: Tomas Winkler <[email protected]>
This patch fixes endianty issues in rxon.filter_flags. It also discards usage of iwl_check_bits in some cases. The result is the same but the semantic is not.
--- drivers/net/wireless/iwl-base.c | 12 +++---- drivers/net/wireless/iwl-hw.h | 74 ++++++++++++++++++-------------------- 2 files changed, 40 insertions(+), 46 deletions(-)
drivers/net/wireless/iwl-base.c +5 -7
@@ -984,15 +984,13 @@ static int iwl_full_rxon_required(struct iwl_priv *priv)* flag transitions are allowed using RXON_ASSOC */ /* Check if we are not switching bands */ -if (iwl_check_bits (priv->staging_rxon.flags,RXON_FLG_BAND_24G_MSK ) != -iwl_check_bits (priv->active_rxon.flags,RXON_FLG_BAND_24G_MSK )) +if ((priv->staging_rxon.flags &RXON_FLG_BAND_24G_MSK ) != + (priv->active_rxon.flags &RXON_FLG_BAND_24G_MSK ))return 1 ;/* Check if we are switching association toggle */ -if (iwl_check_bits (priv->staging_rxon.filter_flags, -RXON_FILTER_ASSOC_MSK ) != -iwl_check_bits (priv->active_rxon.filter_flags, -RXON_FILTER_ASSOC_MSK )) +if ((priv->staging_rxon.filter_flags &RXON_FILTER_ASSOC_MSK ) != + (priv->active_rxon.filter_flags &RXON_FILTER_ASSOC_MSK ))return 1 ;return 0 ;
@@ -1154,7 +1152,7 @@ static int iwl_commit_rxon(struct iwl_priv *priv)"* bssid = " MAC_FMT "\n" , ((priv->staging_rxon.filter_flags &RXON_FILTER_ASSOC_MSK ) ?"" :"out" ), - priv->staging_rxon.channel, +le16_to_cpu (priv->staging_rxon.channel), MAC_ARG(priv->staging_rxon.bssid_addr));/* Apply the new configuration */
drivers/net/wireless/iwl-hw.h +35 -39
82 lines not on this page · raw message
Signature · 1 line
1.5.2
Quoted 9 lines · Somebody in the thread at some point
From: Andy Green <[email protected]>
iwlwifi wrongly provides the channel index to the radiotap header on Monitor mode. This results in tcpdump showing "6MHz" for example.
This patch arranges to send the frequency in MHz instead eg, 2437MHz
Signed-off-by Andy Green <[email protected]>Signed-off-by Zhu Yi <[email protected]>
Thanks.
-Andy