hwmon: fix dme1737 temp fault attribute
Subsystems (2)
PATCH 1/1 hwmon: fix dme1737 temp fault attribute
From: Juerg Haefliger <[email protected]>
Fix temp?_fault attribute. The temp was incorrectly compared against 0x0800 rather than 0x8000. Only the upper 8 bits are compared as the datasheet doesn't specify what happens to the lower bits in case of a diode fault.
Signed-off-by Juerg Haefliger <juergh at gmail.com>
Acked-by Jean Delvare <[email protected]>
Signed-off-by Mark M. Hoffman <[email protected]>
--- drivers/hwmon/dme1737.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/hwmon/dme1737.c +1 -1
@@ -750,7 +750,7 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *attr, res = (data->alarms >>DME1737_BIT_ALARM_TEMP [ix]) &0x01 ;break ;case SYS_TEMP_FAULT : - res = (data->temp[ix] =0x0800 ); + res = (((u16 )data->temp[ix] &0xff00 ) =0x8000 );break ;default : res =0 ;
Signature · 7 lines
1.5.2.2 _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors