Skip to contentSkip to conversation

unable to handle kernel NULL pointer dereference in qla2x00_read_nvram_data

DISCUSSION Zhang, Yanmin 2 participants 3 messages Aug 7, 2007

lore
Share & tools
lore
#0 lore raw

Did someone see the same issue? My machine has a qla fiber card.

This error is triggered because parameter buf of qla2x00_read_nvram_data is 0.

--yanmin

**********************Console log************************

scsi 0:0:8:0: Processor SUPER GEM359 REV001 1.09 PQ: 0
ANSI: 2
target0:0:8: asynchronous
target0:0:8: Beginning Domain Validation
target0:0:8: Ending Domain Validation
ACPI: PCI Interrupt 0000:04:02.1[B] -> GSI 17 (level, low) -> IRQ 18 scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
<Adaptec AIC7902 Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz,
512 SCBs
Adaptec aacraid driver 1.1-5[2449]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded QLogic Fibre Channel HBA Driver
ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 16 (level, low) -> IRQ 16 qla2xxx 0000:05:01.0: Found an ISP2312, irq 16, iobase 0xf8862000 qla2xxx 0000:05:01.0: Configuring PCI space...
qla2xxx 0000:05:01.0: Configure NVRAM parameters...

BUG: unable to handle kernel NULL pointer dereference at virtual address

00000000
printing eip:
c04347db
*pde = 00000000

Oops: 0002 [#1]
SMP 
Modules linked in:
CPU:    5
EIP:    0060:[<c04347db>]    Not tainted VLI
EFLAGS: 00010202   (2.6.23-rc2 #1)

EIP is at qla2x00_read_nvram_data+0x25/0x56
eax: 00005349 ebx: 00000000 ecx: 042d8138 edx: 0000007d
esi: f7d9a34c edi: 00000001 ebp: 00000001 esp: f7e85d98
ds: 007b es: 007b fs: 00d8 gs: 0000 ss: 0068
Process swapper (pid: 1, ti=f7e84000 task=f7e82000 task.ti=f7e84000)

Stack: 00000000 c04347b6 00000000 f7d9a34c 00000000 c0425737 00000100
00000008 
       f7dc0000 00000000 00000000 00000024 f7d9a34c f7d9a34c f7d9a34c
c39cc000 
       c398b13c f7d9a34c f7d9a34c f8862000 c0423db8 c06cbd17 c06ca4b9
c398b13c    
Call Trace:

 [<c04347b6>] qla2x00_read_nvram_data+0x0/0x56

 [<c0425737>] qla2x00_nvram_config+0x7e/0x765

 [<c0423db8>] qla2x00_initialize_adapter+0x113/0x226

 [<c04208e1>] qla2x00_probe_one+0x8ea/0xcb9

 [<c01aa54b>] sysfs_ilookup_test+0x0/0xd

 [<c0181acf>] ifind+0x8c/0x93

 [<c01aa54b>] sysfs_ilookup_test+0x0/0xd

 [<c01aba78>] sysfs_create_link+0xf1/0x149

 [<c02d7252>] pci_match_device+0x84/0xa4

 [<c02d72be>] pci_device_probe+0x36/0x57

 [<c034fc17>] driver_probe_device+0xe1/0x15f

 [<c034fd3b>] __driver_attach+0x0/0xab

 [<c034fdae>] __driver_attach+0x73/0xab

 [<c034f174>] bus_for_each_dev+0x37/0x59

 [<c034fa6f>] driver_attach+0x16/0x18

 [<c034fd3b>] __driver_attach+0x0/0xab

 [<c034f45e>] bus_add_driver+0x6d/0x170

 [<c02d73fa>] __pci_register_driver+0x53/0x7f

 [<c07df181>] qla2x00_module_init+0xd4/0xfe

 [<c07be477>] kernel_init+0x14d/0x2af

 [<c05a39ad>] _spin_unlock_irq+0x5/0x7
 [<c0124469>] schedule_tail+0x37/0x91
 [<c0104d32>] 
#1 lore raw
Quoted 4 lines · Yanmin

Did someone see the same issue? My machine has a qla fiber card.

This error is triggered because parameter buf of qla2x00_read_nvram_data is 0.

Sorry for missing kernel info. I used kernel 2.6.23-rc2. My machine is a x86_64, but I installed i386 os on it.

If I disable CONFIG_SCSI_QLOGIC_1280 and CONFIG_SCSI_QLA_FC in kernel config, kernel could boot.

Quoted 95 lines

--yanmin

**********************Console log************************

scsi 0:0:8:0: Processor SUPER GEM359 REV001 1.09 PQ: 0
ANSI: 2
target0:0:8: asynchronous
target0:0:8: Beginning Domain Validation
target0:0:8: Ending Domain Validation
ACPI: PCI Interrupt 0000:04:02.1[B] -> GSI 17 (level, low) -> IRQ 18 scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
<Adaptec AIC7902 Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz,
512 SCBs
Adaptec aacraid driver 1.1-5[2449]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded QLogic Fibre Channel HBA Driver
ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 16 (level, low) -> IRQ 16 qla2xxx 0000:05:01.0: Found an ISP2312, irq 16, iobase 0xf8862000 qla2xxx 0000:05:01.0: Configuring PCI space...
qla2xxx 0000:05:01.0: Configure NVRAM parameters...

BUG: unable to handle kernel NULL pointer dereference at virtual address

00000000
printing eip:
c04347db
*pde = 00000000

Oops: 0002 [#1]
SMP 
Modules linked in:
CPU:    5
EIP:    0060:[<c04347db>]    Not tainted VLI
EFLAGS: 00010202   (2.6.23-rc2 #1)

EIP is at qla2x00_read_nvram_data+0x25/0x56
eax: 00005349 ebx: 00000000 ecx: 042d8138 edx: 0000007d
esi: f7d9a34c edi: 00000001 ebp: 00000001 esp: f7e85d98
ds: 007b es: 007b fs: 00d8 gs: 0000 ss: 0068
Process swapper (pid: 1, ti=f7e84000 task=f7e82000 task.ti=f7e84000)

Stack: 00000000 c04347b6 00000000 f7d9a34c 00000000 c0425737 00000100
00000008 
       f7dc0000 00000000 00000000 00000024 f7d9a34c f7d9a34c f7d9a34c
c39cc000 
       c398b13c f7d9a34c f7d9a34c f8862000 c0423db8 c06cbd17 c06ca4b9
c398b13c    
Call Trace:

 [<c04347b6>] qla2x00_read_nvram_data+0x0/0x56

 [<c0425737>] qla2x00_nvram_config+0x7e/0x765

 [<c0423db8>] qla2x00_initialize_adapter+0x113/0x226

 [<c04208e1>] qla2x00_probe_one+0x8ea/0xcb9

 [<c01aa54b>] sysfs_ilookup_test+0x0/0xd

 [<c0181acf>] ifind+0x8c/0x93

 [<c01aa54b>] sysfs_ilookup_test+0x0/0xd

 [<c01aba78>] sysfs_create_link+0xf1/0x149

 [<c02d7252>] pci_match_device+0x84/0xa4

 [<c02d72be>] pci_device_probe+0x36/0x57

 [<c034fc17>] driver_probe_device+0xe1/0x15f

 [<c034fd3b>] __driver_attach+0x0/0xab

 [<c034fdae>] __driver_attach+0x73/0xab

 [<c034f174>] bus_for_each_dev+0x37/0x59

 [<c034fa6f>] driver_attach+0x16/0x18

 [<c034fd3b>] __driver_attach+0x0/0xab

 [<c034f45e>] bus_add_driver+0x6d/0x170

 [<c02d73fa>] __pci_register_driver+0x53/0x7f

 [<c07df181>] qla2x00_module_init+0xd4/0xfe

 [<c07be477>] kernel_init+0x14d/0x2af

 [<c05a39ad>] _spin_unlock_irq+0x5/0x7
 [<c0124469>] schedule_tail+0x37/0x91
 [<c0104d32>] 

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#2 lore raw
Quoted 11 lines · Yanmin
Quoted 4 lines · Yanmin

Did someone see the same issue? My machine has a qla fiber card.

This error is triggered because parameter buf of qla2x00_read_nvram_data is 0.

Sorry for missing kernel info. I used kernel 2.6.23-rc2. My machine is a x86_64, but I installed i386 os on it.

If I disable CONFIG_SCSI_QLOGIC_1280 and CONFIG_SCSI_QLA_FC in kernel config, kernel could boot.

Hi,
what version of kernel do you use?
I read the code, maybe 23-rc1-mm2 fixed the bug.
-mm2 add the code to alloc nvram buffer.

Regards
dave