Skip to contentSkip to conversation

Mask Issue?

DISCUSSION Chris Holvenstot 3 participants 5 messages Sep 19, 2007 – Sep 25, 2007

lore
Share & tools
lore
#0 lore raw

Still being a little new at this I am not sure if this is an issue at all or not but I noted that while building the 2.6.23-rc6-git8 kernel this afternoon I received the following error message:

Building modules, stage 2.
MODPOST 1670 modules
WARNING: Can't handle masks in drivers/mtd/nand/cafe_nand:FFFF0

I have been building each of the kernels in the 2.6.23-rc series and had not noted this message before. I apologize if this is a non-issue.

#1 lore raw

On (19/09/07 17:57), Chris Holvenstot didst pronounce:

Quoted 11 lines

Still being a little new at this I am not sure if this is an issue at all or not but I noted that while building the 2.6.23-rc6-git8 kernel this afternoon I received the following error message:

Building modules, stage 2.
MODPOST 1670 modules
WARNING: Can't handle masks in drivers/mtd/nand/cafe_nand:FFFF0

I have been building each of the kernels in the 2.6.23-rc series and had not noted this message before. I apologize if this is a non-issue.

I noticed this in a -mm recently and never got around to kicking it properly because I suspected it was a compiler issue. What version of gcc and binutils are you using?

David Woodhouse added to cc in case this is a known problem.

Signature · 3 lines
Mel Gorman
Part-time Phd Student                          Linux Technology Center
University of Limerick                         IBM Dublin Software Lab
#2 lore raw
Quoted 5 lines · Mel Gorman

I noticed this in a -mm recently and never got around to kicking it properly because I suspected it was a compiler issue. What version of gcc and binutils are you using?

David Woodhouse added to cc in case this is a known problem.

The only reason for this is because once upon a time, the early FPGA versions of the CAFÉ chip had the same PCI ident for all three functions. The cluebat was applied; the chip was fixed long before tape-out. We can just drop the whole class/mask thing, I suspect -- I just want to boot it on and OLPC machine before I commit that.

Signature · 1 line
dwmw2
#3 lore raw
In reply to Mel Gorman
Quoted 13 lines · Mel Gorman

On (19/09/07 17:57), Chris Holvenstot didst pronounce:

Quoted 11 lines

Still being a little new at this I am not sure if this is an issue at all or not but I noted that while building the 2.6.23-rc6-git8 kernel this afternoon I received the following error message:

Building modules, stage 2.
MODPOST 1670 modules
WARNING: Can't handle masks in drivers/mtd/nand/cafe_nand:FFFF0

I have been building each of the kernels in the 2.6.23-rc series and had not noted this message before. I apologize if this is a non-issue.

Quoted 6 lines

I noticed this in a -mm recently and never got around to kicking it properly because I suspected it was a compiler issue. What version of gcc and binutils are you using?

David Woodhouse added to cc in case this is a known problem.

Mel -

Thank you for the response. I was a little unsure if this was to trivial to report.

In any case to answer your question I use version 4.1.2 of GCC and the binutils package shows as 2.17.20070103cvs-0ubuntu2

Chris

#4 lore raw

On (24/09/07 18:07), Chris Holvenstot didst pronounce:

Quoted 19 lines · Mel Gorman
Quoted 17 lines

On (19/09/07 17:57), Chris Holvenstot didst pronounce:

Quoted 11 lines

Still being a little new at this I am not sure if this is an issue at all or not but I noted that while building the 2.6.23-rc6-git8 kernel this afternoon I received the following error message:

Building modules, stage 2.
MODPOST 1670 modules
WARNING: Can't handle masks in drivers/mtd/nand/cafe_nand:FFFF0

I have been building each of the kernels in the 2.6.23-rc series and had not noted this message before. I apologize if this is a non-issue.

I noticed this in a -mm recently and never got around to kicking it properly because I suspected it was a compiler issue. What version of gcc and binutils are you using?

Quoted 8 lines
Quoted 2 lines

David Woodhouse added to cc in case this is a known problem.

Mel -

Thank you for the response. I was a little unsure if this was to trivial to report.

It's never trivial but don't be discouraged if your report appears to fall between the cracks - it happens from time to time particularly when the subject is a bit obtuse.

Quoted 3 lines

In any case to answer your question I use version 4.1.2 of GCC and the binutils package shows as 2.17.20070103cvs-0ubuntu2

As David says the check will go away in the near future, I reckon it's safe to ignore the problem (unless David objects) and disable it in your .config and continue with your testing. As the driver is specific to the One Laptop Per Child project, I'm guessing you are not affected.

Thanks for testing and reporting.

Signature · 3 lines
Mel Gorman
Part-time Phd Student                          Linux Technology Center
University of Limerick                         IBM Dublin Software Lab