Skip to contentSkip to conversation

sleepy linux 2.6.23-rc9

DISCUSSION Pavel Machek 4 participants 4 messages Oct 8, 2007 – Oct 9, 2007

lore
Share & tools
lore
#0 lore raw

Hi!

I played with powertop a bit, and found a fairly interesting failure mode. If I boot init=/bin/bash vga=1, I get ~2 wakeups a second, nice.

When I boot init=/bin/bash vga=791 (vesa framebuffer), most wakeups are caused by cursor painting (I should fix that some day, I guess). But... the cursor blinking does not even work properly!

It blinks at normal speed, then (randomly) it blinks slowly, then gets back to normal speed, then inserts longer delay.

The effect is so nice that I thought about youtube ;-). Thinkpad x60.. question is, how to debug it?

(config attached, I did all the stuff powertop told me to, and then some.)
Pavel

Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
#1 lore raw
Quoted 9 lines · Pavel Machek

I played with powertop a bit, and found a fairly interesting failure mode. If I boot init=/bin/bash vga=1, I get ~2 wakeups a second, nice.

When I boot init=/bin/bash vga=791 (vesa framebuffer), most wakeups are caused by cursor painting (I should fix that some day, I guess). But... the cursor blinking does not even work properly!

It blinks at normal speed, then (randomly) it blinks slowly, then gets back to normal speed, then inserts longer delay.

Is the effect a beat that it has roughly the frequency of your Notebooks screen refresh rate (60Hz)? (in german: Schwebung)

Quoted 2 lines

The effect is so nice that I thought about youtube ;-). Thinkpad x60.. question is, how to debug it?

No idea... check where the register of the HW cursor blink rate gets written? But as it seems to be so nice, please submit a patch which enables this for all platforms. ;-)

Regards,

Signature · 11 lines
Clemens Koller
_______________________________
R&D Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
81379 Muenchen
Germany

http://www.anagramm-technology.com
Phone: +49-89-741518-50
Fax: +49-89-741518-19
#2 lore raw
Quoted 11 lines · Clemens Koller
Quoted 7 lines

When I boot init=/bin/bash vga=791 (vesa framebuffer), most wakeups are caused by cursor painting (I should fix that some day, I guess). But... the cursor blinking does not even work properly!

It blinks at normal speed, then (randomly) it blinks slowly, then gets back to normal speed, then inserts longer delay.

Is the effect a beat that it has roughly the frequency of your Notebooks screen refresh rate (60Hz)? (in german: Schwebung)

Quoted 7 lines
Quoted 2 lines

The effect is so nice that I thought about youtube ;-). Thinkpad x60.. question is, how to debug it?

No idea... check where the register of the HW cursor blink rate gets written? But as it seems to be so nice, please submit a patch which enables this for all platforms. ;-)

For the VESA framebuffer I would assume the cursor blinking is done in software (if done at all.)

-hpa

#3 lore raw
In reply to Pavel Machek
Quoted 9 lines · Pavel Machek

Hi!

I played with powertop a bit, and found a fairly interesting failure mode. If I boot init=/bin/bash vga=1, I get ~2 wakeups a second, nice.

When I boot init=/bin/bash vga=791 (vesa framebuffer), most wakeups are caused by cursor painting (I should fix that some day, I guess). But... the cursor blinking does not even work properly!

Quoted 5 lines

It blinks at normal speed, then (randomly) it blinks slowly, then gets back to normal speed, then inserts longer delay.

The effect is so nice that I thought about youtube ;-). Thinkpad x60.. question is, how to debug it?

The cursor blinking is done by software via a timer. It's in drivers/video/console/fbcon.c.

With the latest -rc kernel you can turn off the blinking with

echo 0 > /sys/class/graphics/fbcon/cursor_blink

Tony