Skip to contentSkip to conversation

mpc83xx: Add ATM makefile entry for MPC8360EMDS and MPC832XEMDS and typo fix

PATCH New Tony Li 1 participant 1 message Oct 12, 2007 Kbuild

lore
Share & tools
lore

Tony Li

author
#0 lore raw

PATCH 1/1 mpc83xx: Add ATM makefile entry for MPC8360EMDS and MPC832XEMDS and typo fix

Add ATM make entry for MPC8360EMDS and MPC832XEMDS And type fix for MPC832XEMDS ATM

Signed-off-by Tony Li <[email protected]>
---
 Makefile                            |   22 +++++++++++++++++++---
 board/freescale/common/pq-mds-pib.c |   26 +++++++++++++-------------
 2 files changed, 32 insertions(+), 16 deletions(-)
Makefile +19 -3
index 8d500f5..63a5c3b 100644
@@ -1765,7 +1765,8 @@ MPC8323ERDB_config:	unconfig
 MPC832XEMDS_config \
 MPC832XEMDS_HOST_33_config \
 MPC832XEMDS_HOST_66_config \
-MPC832XEMDS_SLAVE_config:	unconfig
+MPC832XEMDS_SLAVE_config \
+MPC832XEMDS_ATM_config:	unconfig
 	@mkdir -p $(obj)include
 	@echo "" >$(obj)include/config.h ; \
 	if [ "$(findstring _HOST_,$@)" ] ; then \

@@ -1780,11 +1781,18 @@ MPC832XEMDS_SLAVE_config:	unconfig
 	if [ "$(findstring _33_,$@)" ] ; then \
 		echo -n "...33M ..." ; \
 		echo "#define PCI_33M" >>$(obj)include/config.h ; \
+		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _66_,$@)" ] ; then \
 		echo -n "...66M..." ; \
 		echo "#define PCI_66M" >>$(obj)include/config.h ; \
-	fi ;
+		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+	fi ; \
+	if [ "$(findstring _ATM_,$@)" ] ; then \
+		echo -n "...ATM..." ; \
+		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+		echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
+        fi ;
 	@$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale
 
 MPC8349EMDS_config:	unconfig

@@ -1807,7 +1815,8 @@ MPC8349ITXGP_config:	unconfig
 MPC8360EMDS_config \
 MPC8360EMDS_HOST_33_config \
 MPC8360EMDS_HOST_66_config \
-MPC8360EMDS_SLAVE_config:	unconfig
+MPC8360EMDS_SLAVE_config \
+MPC8360EMDS_ATM_config: unconfig
 	@mkdir -p $(obj)include
 	@echo "" >$(obj)include/config.h ; \
 	if [ "$(findstring _HOST_,$@)" ] ; then \

@@ -1822,10 +1831,17 @@ MPC8360EMDS_SLAVE_config:	unconfig
 	if [ "$(findstring _33_,$@)" ] ; then \
 		echo -n "...33M ..." ; \
 		echo "#define PCI_33M" >>$(obj)include/config.h ; \
+		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _66_,$@)" ] ; then \
 		echo -n "...66M..." ; \
 		echo "#define PCI_66M" >>$(obj)include/config.h ; \
+		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+	fi ; \
+	if [ "$(findstring _ATM_,$@)" ] ; then \
+		echo -n "...ATM..." ; \
+		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+		echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
 	fi ;
 	@$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale
board/freescale/common/pq-mds-pib.c +13 -13
index d79f2eb..e4f96e8 100644
@@ -79,19 +79,19 @@ int pib_init(void)
 
 	printf("QOC3 ATM card on PMC0\n");
 #elif defined(CONFIG_MPC832XEMDS)
-	val = 0;
-	i2c_write(0x26, 0x7, 1, &val, 1);
-	val = 0xf7;
-	i2c_write(0x26, 0x3, 1, &val, 1);
-
-	val = 0;
-	i2c_write(0x21, 0x6, 1, &val, 1);
-	i2c_write(0x21, 0x7, 1, &val, 1);
-
-	val = 0xdf;
-	i2c_write(0x21, 0x2, 1, &val, 1);
-	val = 0xef;
-	i2c_write(0x21, 0x3, 1, &val, 1);
+	val8 = 0;
+	i2c_write(0x26, 0x7, 1, &val8, 1);
+	val8 = 0xf7;
+	i2c_write(0x26, 0x3, 1, &val8, 1);
+
+	val8 = 0;
+	i2c_write(0x21, 0x6, 1, &val8, 1);
+	i2c_write(0x21, 0x7, 1, &val8, 1);
+
+	val8 = 0xdf;
+	i2c_write(0x21, 0x2, 1, &val8, 1);
+	val8 = 0xef;
+	i2c_write(0x21, 0x3, 1, &val8, 1);
 
 	eieio();
Signature · 1 line
1.5.2