changes for IDS8247 board support

PATCH New Sergej Stepanov 2 participants 3 messages Oct 17, 2007 – Nov 5, 2007

Share & tools

Sergej Stepanov

author

2007-10-17 09:18 UTC #0 lore raw

PATCH v2 2/2 changes for IDS8247 board support

To get the IDS8247 board working following are done:
- FCC2 is deactivated
- FCC1 is activated
- I2C is activated
- CFI driver is activated
- Adapted for use with LIBFDT

Signed-off-by Sergej Stepanov <[email protected]>

board/ids8247/ids8247.c +74 ~~-33~~

index 19823a4..02716ed 100644
@@ -25,6 +25,12 @@
 #include <ioports.h>
 #include <mpc8260.h>
 
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#include <libfdt_env.h>
+#include <fdt_support.h>
+#endif
+
 DECLARE_GLOBAL_DATA_PTR;
 
 /*

@@ -38,12 +44,12 @@ const iop_conf_t iop_conf_tab[4][32] = {
 
     /* Port A configuration */
     {	/*	      conf ppar psor pdir podr pdat */
-	/* PA31 */ {   0,   1,	 1,   0,   0,	0   }, /* FCC1 COL */
-	/* PA30 */ {   0,   1,	 1,   0,   0,	0   }, /* FCC1 CRS */
-	/* PA29 */ {   0,   1,	 1,   1,   0,	0   }, /* FCC1 TXER */
-	/* PA28 */ {   0,   1,	 1,   1,   0,	0   }, /* FCC1 TXEN */
-	/* PA27 */ {   0,   1,	 1,   0,   0,	0   }, /* FCC1 RXDV */
-	/* PA26 */ {   0,   1,	 1,   0,   0,	0   }, /* FCC1 RXER */
+	/* PA31 */ {   1,   1,	 1,   0,   0,	0   }, /* FCC1 COL */
+	/* PA30 */ {   1,   1,	 1,   0,   0,	0   }, /* FCC1 CRS */
+	/* PA29 */ {   1,   1,	 1,   1,   0,	0   }, /* FCC1 TXER */
+	/* PA28 */ {   1,   1,	 1,   1,   0,	0   }, /* FCC1 TXEN */
+	/* PA27 */ {   1,   1,	 1,   0,   0,	0   }, /* FCC1 RXDV */
+	/* PA26 */ {   1,   1,	 1,   0,   0,	0   }, /* FCC1 RXER */
 	/* PA25 */ {   0,   0,	 0,   0,   1,	0   }, /* 8247_P0 */
 #if defined(CONFIG_SOFT_I2C)
 	/* PA24 */ {   1,   0,	 0,   0,   1,	1   }, /* I2C_SDA2 */

@@ -53,14 +59,14 @@ const iop_conf_t iop_conf_tab[4][32] = {
 	/* PA23 */ {   0,   0,	 0,   1,   0,	0   }, /* PA23 */
 #endif
 	/* PA22 */ {   0,   0,	 0,   0,   1,	0   }, /* SMC2_DCD */
-	/* PA21 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC1 TXD3 */
-	/* PA20 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC1 TXD2 */
-	/* PA19 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC1 TXD1 */
-	/* PA18 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC1 TXD0 */
-	/* PA17 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC1 RXD0 */
-	/* PA16 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC1 RXD1 */
-	/* PA15 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC1 RXD2 */
-	/* PA14 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC1 RXD3 */
+	/* PA21 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC1 TXD3 */
+	/* PA20 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC1 TXD2 */
+	/* PA19 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC1 TXD1 */
+	/* PA18 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC1 TXD0 */
+	/* PA17 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC1 RXD0 */
+	/* PA16 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC1 RXD1 */
+	/* PA15 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC1 RXD2 */
+	/* PA14 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC1 RXD3 */
 	/* PA13 */ {   0,   0,	 0,   1,   1,	0   }, /* SMC2_RTS */
 	/* PA12 */ {   0,   0,	 0,   0,   1,	0   }, /* SMC2_CTS */
 	/* PA11 */ {   0,   0,	 0,   1,   1,	0   }, /* SMC2_DTR */

@@ -79,20 +85,20 @@ const iop_conf_t iop_conf_tab[4][32] = {
 
     /* Port B configuration */
     {	/*	      conf ppar psor pdir podr pdat */
-	/* PB31 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TX_ER */
-	/* PB30 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RX_DV */
-	/* PB29 */ {   1,   1,	 1,   1,   0,	0   }, /* FCC2 MII TX_EN */
-	/* PB28 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RX_ER */
-	/* PB27 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII COL */
-	/* PB26 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII CRS */
-	/* PB25 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[3] */
-	/* PB24 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[2] */
-	/* PB23 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[1] */
-	/* PB22 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[0] */
-	/* PB21 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[0] */
-	/* PB20 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[1] */
-	/* PB19 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[2] */
-	/* PB18 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[3] */
+	/* PB31 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC2 MII TX_ER */
+	/* PB30 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII RX_DV */
+	/* PB29 */ {   0,   1,	 1,   1,   0,	0   }, /* FCC2 MII TX_EN */
+	/* PB28 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII RX_ER */
+	/* PB27 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII COL */
+	/* PB26 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII CRS */
+	/* PB25 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[3] */
+	/* PB24 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[2] */
+	/* PB23 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[1] */
+	/* PB22 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[0] */
+	/* PB21 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[0] */
+	/* PB20 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[1] */
+	/* PB19 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[2] */
+	/* PB18 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[3] */
 	/* PB17 */ {   0,   0,	 0,   0,   0,	0   }, /* PB17 */
 	/* PB16 */ {   0,   0,	 0,   0,   0,	0   }, /* PB16 */
 	/* PB15 */ {   0,   0,	 0,   0,   0,	0   }, /* PB15 */

@@ -123,8 +129,8 @@ const iop_conf_t iop_conf_tab[4][32] = {
 	/* PC26 */ {   0,   0,	 0,   1,   0,	0   }, /* PC26 */
 	/* PC25 */ {   0,   1,	 1,   0,   0,	0   }, /* SYNC_IN */
 	/* PC24 */ {   0,   0,	 0,   1,   0,	0   }, /* PC24 */
-	/* PC23 */ {   0,   1,	 0,   1,   0,	0   }, /* ATMTFCLK */
-	/* PC22 */ {   0,   1,	 0,   0,   0,	0   }, /* ATMRFCLK */
+	/* PC23 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC1 MII TX_CLK */
+	/* PC22 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC1 MII RX_CLK */
 	/* PC21 */ {   0,   1,	 0,   0,   0,	0   }, /* SCC1 EN RXCLK */
 	/* PC20 */ {   0,   1,	 0,   0,   0,	0   }, /* SCC1 EN TXCLK */
 	/* PC19 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RX_CLK */

@@ -180,7 +186,7 @@ const iop_conf_t iop_conf_tab[4][32] = {
 	/* PD10 */ {   0,   0,	 0,   0,   0,	0   }, /* PD10 */
 	/* PD9	*/ {   0,   0,	 0,   0,   0,	0   }, /* PD9 */
 	/* PD8	*/ {   0,   0,	 0,   0,   0,	0   }, /* PD8 */
-	/* PD7	*/ {   0,   0,	 0,   1,   0,	1   }, /* MII_MDIO */
+	/* PD7	*/ {   1,   0,	 0,   1,   0,	1   }, /* MII_MDIO */
 	/* PD6	*/ {   0,   0,	 0,   1,   0,	1   }, /* PD6 */
 	/* PD5	*/ {   0,   0,	 0,   1,   0,	1   }, /* PD5 */
 	/* PD4	*/ {   0,   0,	 0,   1,   0,	1   }, /* PD4 */

@@ -224,7 +230,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 	 * mapped by the controller. That means, that the initial mapping has
 	 * to be (at least) twice as large as the maximum expected size.
 	 */
-	maxsize = (1 + (~orx | 0x7fff)) / 2;
+	maxsize = (1 + (~orx | 0x7fff))/* / 2*/;
 
 	sdmr_ptr = &memctl->memc_psdmr;
 	orx_ptr = &memctl->memc_or2;

@@ -315,4 +321,39 @@ nand_init (void)
 	printf ("%4lu MB\n", totlen >>20);
 }
 
-#endif
+#endif	/* CFG_CMD_NAND */
+
+#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
+/*
+ * update "memory" property in the blob
+ */
+void ft_blob_update(void *blob, bd_t *bd)
+{
+	int ret, nodeoffset = 0;
+	ulong memory_data[2] = {0};
+
+	memory_data[0] = cpu_to_be32(bd->bi_memstart);
+	memory_data[1] = cpu_to_be32(bd->bi_memsize);
+
+	nodeoffset = fdt_find_node_by_path (blob, "/memory");
+	if (nodeoffset >= 0) {
+		ret = fdt_setprop(blob, nodeoffset, "reg", memory_data,
+					sizeof(memory_data));
+	if (ret < 0)
+		printf("ft_blob_update): cannot set /memory/reg "
+			"property err:%s\n", fdt_strerror(ret));
+	}
+	else {
+		/* memory node is required in dts */
+		printf("ft_blob_update(): cannot find /memory node "
+		"err:%s\n", fdt_strerror(nodeoffset));
+	}
+}
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	ft_cpu_setup( blob, bd);
+	ft_blob_update(blob, bd);
+}
+#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
+

include/configs/IDS8247.h +28 ~~-10~~

index 85d2bb3..bb87fae 100644
@@ -120,6 +120,17 @@
 
 #define CFG_NS16550_COM1        (CFG_UART_BASE + 0x8000)
 
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+#define OF_CPU	"PowerPC,8247 at 0"
+#define OF_SOC	"soc@f0000000"
+#define OF_TBCLK	(bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH	"/soc at f0000000/serial8250 at e0008000"
+
+
 /*
  * select ethernet configuration
  *

@@ -133,16 +144,18 @@
 #undef	CONFIG_ETHER_ON_SCC		/* define if ether on SCC       */
 #define	CONFIG_ETHER_ON_FCC		/* define if ether on FCC       */
 #undef	CONFIG_ETHER_NONE		/* define if ether on something else */
-#define	CONFIG_ETHER_INDEX    2		/* which SCC/FCC channel for ethernet */
+#define	CONFIG_ETHER_INDEX	1	/* which SCC/FCC channel for ethernet */
+#define CONFIG_ETHER_ON_FCC1
+#define FCC_ENET
 
 /*
- * - Rx-CLK is CLK13
- * - Tx-CLK is CLK14
+ * - Rx-CLK is CLK10
+ * - Tx-CLK is CLK9
  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CFG_CMXFCR_MASK	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-# define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+# define CFG_CMXFCR_MASK	(CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
+# define CFG_CMXFCR_VALUE	(CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK9)
 # define CFG_CPMFCR_RAMTYPE	0
 # define CFG_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)

@@ -166,6 +179,8 @@
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_BOOTFILESIZE
 
+#define CONFIG_RTC_PCF8563
+#define CFG_I2C_RTC_ADDR		0x51
 
 /*
  * Command line configuration.

@@ -211,7 +226,10 @@
  */
 #define CFG_BOOTMAPSZ        (8 << 20)       /* Initial Memory map for Linux */
 
-
+#define CFG_FLASH_CFI				/* The flash is CFI compatible  */
+#define CFG_FLASH_CFI_DRIVER			/* Use common CFI driver        */
+#define CFG_FLASH_BANKS_LIST	{ 0xFF800000 }
+#define CFG_MAX_FLASH_BANKS_DETECT	1
 /* What should the base address of the main FLASH be and how big is
  * it (in MBytes)? This must contain TEXT_BASE from board/ids8247/config.mk
  * The main FLASH is whichever is connected to *CS0.

@@ -227,7 +245,7 @@
  * FLASH organization
  */
 #define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks      */
-#define CFG_MAX_FLASH_SECT	64	/* max num of sects on one chip */
+#define CFG_MAX_FLASH_SECT	128	/* max num of sects on one chip */
 
 #define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
 #define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */

@@ -511,12 +529,12 @@
 */
 #define CFG_OR2    ((~(CFG_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
 			 ORxS_BPD_4                     |\
-			 ORxS_ROWST_PBI0_A10             |\
+			 ORxS_ROWST_PBI0_A9		|\
 			 ORxS_NUMR_12)
 
-#define CFG_PSDMR  (PSDMR_SDAM_A13_IS_A5 |\
+#define CFG_PSDMR  (PSDMR_SDAM_A14_IS_A5 |\
 			 PSDMR_BSMA_A15_A17           |\
-			 PSDMR_SDA10_PBI0_A11         |\
+			 PSDMR_SDA10_PBI0_A10		|\
 			 PSDMR_RFRC_5_CLK               |\
 			 PSDMR_PRETOACT_2W              |\
 			 PSDMR_ACTTORW_2W               |\

Wolfgang Denk

Applied

2007-11-03 21:02 UTC #1 lore raw

PATCH v2 2/2 changes for IDS8247 board support

Quoted 9 lines · In message <[email protected]> you wrote:

To get the IDS8247 board working following are done:
- FCC2 is deactivated
- FCC1 is activated
- I2C is activated
- CFI driver is activated
- Adapted for use with LIBFDT
Signed-off-by Sergej Stepanov <[email protected]>
--

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 8 lines

DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
No one is fit to be trusted with power. ... No one. ... Any  man  who
has lived at all knows the follies and wickedness he's capabel of ...
And  if  he  does  know it, he knows also that neither he nor any man
ought to be allowed to decide a single human fate.
- C. P. Snow,  The Light and the Dark

Sergej Stepanov

author

2007-11-05 08:18 UTC #2 lore raw

PATCH v2 2/2 changes for IDS8247 board support

Am Samstag, den 03.11.2007, 22:02 +0100 schrieb Wolfgang Denk:

Quoted 8 lines

Quoted 7 lines · In message <[email protected]> you wrote:
To get the IDS8247 board working following are done:
- FCC2 is deactivated
- FCC1 is activated
- I2C is activated
- CFI driver is activated
- Adapted for use with LIBFDT

Quoted 7 lines

Quoted 2 lines
Signed-off-by Sergej Stepanov <[email protected]>
--
Applied, thanks.
Best regards,
Wolfgang Denk

Thank you very much!

Signature · 13 lines

Sergej I. Stepanov
E-PA
IDS GmbH
Nobelstr. 18, Zim. 3.0.09
D-76275 Ettlingen
T +49 (0) 72 43/2 18-615
F +49 (0) 72 43/2 18-400
Email: <[email protected]>

<http://www.ids.de>
Gesch?ftsf?hrer: Norbert Wagner, Friedrich Abri? 
Sitz der Gesellschaft: Ettlingen 
Amtsgericht Mannheim HRB 362503