Ocotea board?
Is the Ocotea board (the original 440GX eval board) still interesting? I'm wrapping up a project using the 440GX, I started out hacking on the Ocotea board to get started, but we moved off Ocotea long ago onto our own hardware.
I'm cleaning up the lab now that the project is nearly finished and I would like to give the board to someone that will put it to good use. I've sponged off this mailing list quite a lot, it's about time I give a little something back.
The board has been hacked a little bit but still works fine. I just powered it up and it happily booted Linux via TFTP. The boot ROM now has u-boot, the original PIBs (or whatever) is long gone. All I ask is that you're self-sufficient and don't bug me too much about it...
Can someone recommend a good home? Otherwise it will wind up in storeroom purgatory.
jeff
Quoted 9 lines · Jeff Mock
Is the Ocotea board (the original 440GX eval board) still interesting? I'm wrapping up a project using the 440GX, I started out hacking on the Ocotea board to get started, but we moved off Ocotea long ago onto our own hardware.
I'm cleaning up the lab now that the project is nearly finished and I would like to give the board to someone that will put it to good use. I've sponged off this mailing list quite a lot, it's about time I give a little something back.
Well, the ocotea has an interesting "feature" related to the way the ethernet PHY an EMAC interact which I haven't dealt with in the new EMAC driver at this stage.
I -think- the Taishan I have may have the same issue though, in which case I won't need it, but if not, I could have good use (or Josh in Rochester) for one of these.
Quoted 14 lines
The board has been hacked a little bit but still works fine. I just powered it up and it happily booted Linux via TFTP. The boot ROM now has u-boot, the original PIBs (or whatever) is long gone. All I ask is that you're self-sufficient and don't bug me too much about it...
Can someone recommend a good home? Otherwise it will wind up in storeroom purgatory.
jeff
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev
Quoted 12 lines · On Wed, 24 Oct 2007 06:36:11 +1000 Benjamin Herrenschmidt…
Quoted 9 lines · Jeff Mock
Is the Ocotea board (the original 440GX eval board) still interesting? I'm wrapping up a project using the 440GX, I started out hacking on the Ocotea board to get started, but we moved off Ocotea long ago onto our own hardware.
I'm cleaning up the lab now that the project is nearly finished and I would like to give the board to someone that will put it to good use. I've sponged off this mailing list quite a lot, it's about time I give a little something back.
Quoted 7 lines
Well, the ocotea has an interesting "feature" related to the way the ethernet PHY an EMAC interact which I haven't dealt with in the new EMAC driver at this stage.
I -think- the Taishan I have may have the same issue though, in which case I won't need it, but if not, I could have good use (or Josh in Rochester) for one of these.
Hardware is always welcome. I actually care about 4xx so if Ben doesn't want it then I'm sure I could find a good home...
josh
Thanks for all of the replies, it's nice to hear that the 440GX isn't obsolete yet... A relatively arbitrary decision, but I'm going to send the Ocotea board to Josh.
jeff
Quoted 15 lines · Jeff Mock
Is the Ocotea board (the original 440GX eval board) still interesting? I'm wrapping up a project using the 440GX, I started out hacking on the Ocotea board to get started, but we moved off Ocotea long ago onto our own hardware.
I'm cleaning up the lab now that the project is nearly finished and I would like to give the board to someone that will put it to good use. I've sponged off this mailing list quite a lot, it's about time I give a little something back.
The board has been hacked a little bit but still works fine. I just powered it up and it happily booted Linux via TFTP. The boot ROM now has u-boot, the original PIBs (or whatever) is long gone. All I ask is that you're self-sufficient and don't bug me too much about it...
Can someone recommend a good home? Otherwise it will wind up in storeroom purgatory.
jeff
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
The AMCC 440GX processor is by no means obsolete. There are more customers for this processor every month. There is a new, comprehensive evaluation kit called "Taishan"
(http://www.amcc.com/Embedded/evalkits/440GX_PB_1_04.pdf), which AMCC provides to customers and partners. "Ocotea" is a board that was originally designed and used for processor validation purposes.
Regards,
Charlie
-----Original Message-----
From: [email protected] [mailto:[email protected]] On = Behalf
Of Jeff Mock
Sent: Wednesday, October 24, 2007 12:10 PM
To: [email protected]; [email protected]
Subject: Re: Ocotea board?
Thanks for all of the replies, it's nice to hear that the 440GX isn't=20
obsolete yet... A relatively arbitrary decision, but I'm going to send
the Ocotea board to Josh.
jeff
Quoted 17 lines · Jeff Mock
Is the Ocotea board (the original 440GX eval board) still interesting?
I'm wrapping up a project using the 440GX, I started out hacking on=20 the Ocotea board to get started, but we moved off Ocotea long ago onto
our own hardware.
=20
I'm cleaning up the lab now that the project is nearly finished and I=20 would like to give the board to someone that will put it to good use. I've sponged off this mailing list quite a lot, it's about time I givea little something back.
=20
The board has been hacked a little bit but still works fine. I just=20 powered it up and it happily booted Linux via TFTP. The boot ROM now=20 has u-boot, the original PIBs (or whatever) is long gone. All I ask is
Quoted 12 lines
that you're self-sufficient and don't bug me too much about it... =20
Can someone recommend a good home? Otherwise it will wind up in=20 storeroom purgatory.
=20
jeff
=20
_______________________________________________
Linuxppc-embedded mailing list [email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
=20
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
--------------------------------------------------------
CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, = is for the sole use of the intended recipient(s) and contains = information that is confidential and proprietary to Applied Micro = Circuits Corporation or its subsidiaries. It is to be used solely for = the purpose of furthering the parties' business relationship. All = unauthorized review, use, disclosure or distribution is prohibited. If = you are not the intended recipient, please contact the sender by reply = e-mail and destroy all copies of the original message.
Well, I suppose that it was really just a little poke to see if anyone from AMCC reads the mailing list :) No offense intended.
The 440GX worked out great for my project, a new spectrometer for the radio telescope in Arecibo. There are 14 of these boxes running in parallel at the telescope. We got good performance out of the 440GX in all respects with no major hangups during development.
jeff
Quoted 59 lines · Charlie Ashton
The AMCC 440GX processor is by no means obsolete. There are more customers for this processor every month. There is a new, comprehensive evaluation kit called "Taishan"
(http://www.amcc.com/Embedded/evalkits/440GX_PB_1_04.pdf), which AMCC provides to customers and partners. "Ocotea" is a board that was originally designed and used for processor validation purposes.Regards,
Charlie-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Jeff Mock
Sent: Wednesday, October 24, 2007 12:10 PM
To: [email protected]; [email protected]
Subject: Re: Ocotea board?Thanks for all of the replies, it's nice to hear that the 440GX isn't obsolete yet... A relatively arbitrary decision, but I'm going to send
the Ocotea board to Josh.
jeff
Quoted 15 lines · Jeff Mock
Is the Ocotea board (the original 440GX eval board) still interesting?
I'm wrapping up a project using the 440GX, I started out hacking on the Ocotea board to get started, but we moved off Ocotea long ago onto
our own hardware.
I'm cleaning up the lab now that the project is nearly finished and I would like to give the board to someone that will put it to good use. I've sponged off this mailing list quite a lot, it's about time I give
a little something back.
The board has been hacked a little bit but still works fine. I just powered it up and it happily booted Linux via TFTP. The boot ROM now has u-boot, the original PIBs (or whatever) is long gone. All I ask is
that you're self-sufficient and don't bug me too much about it...
Quoted 9 lines
Can someone recommend a good home? Otherwise it will wind up in storeroom purgatory.
jeff
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
--------------------------------------------------------CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and contains information that is confidential and proprietary to Applied Micro Circuits Corporation or its subsidiaries. It is to be used solely for the purpose of furthering the parties' business relationship. All unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.