4/4 Support for Toshiba TMIO multifunction devices

Hi guys.

This patchset contains support for three toshiba multifunction devices.

This patch adds platform support for the TMIO devices used by the various e-series platforms.

It depends on the previous patch in this series.

From: Ian Molton <[email protected]>
Date: Tue, 20 Nov 2007 19:58:45 +0000
Subject: [PATCH] add eseries platform support for the TMIO multifunction devices used.

---
 arch/arm/mach-pxa/Makefile        |   10 ++--
 arch/arm/mach-pxa/e330_tc6387xb.c |   88 ++++++++++++++++++++++++++++++++
 arch/arm/mach-pxa/e400_t7l66xb.c  |   96 +++++++++++++++++++++++++++++++++++
 arch/arm/mach-pxa/e740_t7l66xb.c  |   93 ++++++++++++++++++++++++++++++++++
 arch/arm/mach-pxa/e750_tc6393xb.c |   99 +++++++++++++++++++++++++++++++++++++
 5 files changed, 381 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm/mach-pxa/e330_tc6387xb.c
 create mode 100644 arch/arm/mach-pxa/e400_t7l66xb.c
 create mode 100644 arch/arm/mach-pxa/e740_t7l66xb.c
 create mode 100644 arch/arm/mach-pxa/e750_tc6393xb.c

index c78022f..5b8b9ac 100644
@@ -30,11 +30,11 @@ ifeq ($(CONFIG_MACH_ZYLONITE),y)
 endif
 
 obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
-obj-$(CONFIG_MACH_E330)		+= e330_lcd.o
-obj-$(CONFIG_MACH_E740)		+= e740_lcd.o
-obj-$(CONFIG_MACH_E750)		+= e750_lcd.o
-obj-$(CONFIG_MACH_E400)		+= e400_lcd.o
-obj-$(CONFIG_MACH_E800)		+= e800_lcd.o
+obj-$(CONFIG_MACH_E330)		+= e330_lcd.o e330_tc6387xb.o
+obj-$(CONFIG_MACH_E740)		+= e740_lcd.o e740_t7l66xb.o
+obj-$(CONFIG_MACH_E750)		+= e750_lcd.o e750_tc6393xb.o
+obj-$(CONFIG_MACH_E400)		+= e400_lcd.o e400_t7l66xb.o
+obj-$(CONFIG_MACH_E800)		+= e800_lcd.o e750_tc6393xb.o
 
 obj-$(CONFIG_MACH_ARMCORE)      += cm-x270.o
 

1.5.3.5.737.gdee1b