time: fix typo in comments
Quoted 74 lines · Li Zefan
Fix typo in comments.
BTW: I have to fix coding style in
arch/ia64/kernel/time.calso, otherwise checkpatch.pl will be complaining.Signed-off-by Li Zefan <[email protected]>--- arch/ia64/kernel/time.c | 14 +++++++------- arch/x86/kernel/time_64.c | 2 +- include/linux/hrtimer.h | 2 +- include/linux/jiffies.h | 6 +++--- kernel/time.c | 4 ++-- kernel/time/clockevents.c | 2 +- kernel/time/timekeeping.c | 2 +- 7 files changed, 16 insertions(+), 16 deletions(-)arch/ia64/kernel/time.c +7
-7@@ -49,13 +49,13 @@ EXPORT_SYMBOL(last_cli_ip);#endif static struct clocksource clocksource_itc = { - .name ="itc" , - .rating =350 , - .read = itc_get_cycles, - .mask =CLOCKSOURCE_MASK (64 ), - .mult =0 ,/*to be caluclated*/ - .shift =16 , - .flags =CLOCK_SOURCE_IS_CONTINUOUS , + .name ="itc" , + .rating =350 , + .read = itc_get_cycles, + .mask =CLOCKSOURCE_MASK (64 ), + .mult =0 ,/*to be calculated*/ + .shift =16 , + .flags =CLOCK_SOURCE_IS_CONTINUOUS , };static struct clocksource *itc_clocksource;arch/x86/kernel/time_64.c +1
-1@@ -235,7 +235,7 @@ static unsigned int __init tsc_calibrate_cpu_khz(void)reserve_evntsel_nmi (MSR_K7_EVNTSEL0 + i); }local_irq_save (flags); -/* start meauring cycles, incrementing from 0 */ +/* start measuring cycles, incrementing from 0 */ wrmsrl (MSR_K7_PERFCTR0 + i,0 );wrmsrl (MSR_K7_EVNTSEL0 + i,1 <<22 |3 <<16 |0x76 );rdtscl (tsc_start);include/linux/hrtimer.h +1
-1@@ -78,7 +78,7 @@ enum hrtimer_cb_mode {* as otherwise the timer could be removed before the softirq code finishes the * the handling of the timer. * -* The HRTIMER_STATE_ENQUEUE bit is always or'ed to the current state to +* The HRTIMER_STATE_ENQUEUED bit is always or'ed to the current state to * preserve the HRTIMER_STATE_CALLBACK bit in the above scenario. * * All state transitions are protected by cpu_base->lock. include/linux/jiffies.h +0
-0
include/linux/jiffies.h line 39
Quoted 5 lines
include/linux/jiffies.h +1
-1@@ -36,7 +36,7 @@/* LATCH is used in the interval timer and ftape setup. */ #define LATCH ((CLOCK_TICK_RATE + HZ/2) / HZ)/* For divider */ -/* Suppose we want to devide two numbers NOM and DEN: NOM/DEN, the we can +/* Suppose we want to devide two numbers NOM and DEN: NOM/DEN, then we can
divide
Quoted 13 lines
include/linux/jiffies.h +1
-1* improve accuracy by shifting LSH bits, hence calculating: * (NOM << LSH) / DEN * This however means trouble for large NOM, because (NOM << LSH) may no @@ -154,7 +154,7 @@ extern unsigned long preset_lpj;* We want to do realistic conversions of time so we need to use the same * values the update wall clock code uses as the jiffies size. This value * is: TICK_NSEC (which is defined in timex.h). This -* is a constant and is in nanoseconds. We will used scaled math +* is a constant and is in nanoseconds. We will use scaled math * with a set of scales defined here as SEC_JIFFIE_SC, USEC_JIFFIE_SC and * NSEC_JIFFIE_SC. Note that these defines contain nothing but * constants and so are computed at compile time. SHIFT_HZ (computed in
include/linux/jiffies.h extern unsigned long preset_lpj; · line 201
Quoted 5 lines
include/linux/jiffies.h +1
-1@@ -198,7 +198,7 @@ extern unsigned long preset_lpj;* operator if the result is a long long AND at least one of the * operands is cast to long long (usually just prior to the "*" so as * not to confuse it into thinking it really has a 64-bit operand, -* which, buy the way, it can do, but it take more code and at least 2 +* which, buy the way, it can do, but it takes more code and at least 2
by the way
(and does this really add anything to the sentence?)
Quoted 54 lines
include/linux/jiffies.h +0
-0* mpys). * We also need to be aware that one second in nanoseconds is only a kernel/time.c +2
-2@@ -266,7 +266,7 @@ EXPORT_SYMBOL(jiffies_to_usecs);* * This function should be only used for timestamps returned by * current_kernel_time() or CURRENT_TIME, not with do_gettimeofday() because -* it doesn't handle the better resolution of the later. +* it doesn't handle the better resolution of the latter. */ struct timespec timespec_trunc (struct timespec t,unsigned gran) {@@ -314,7 +314,7 @@ EXPORT_SYMBOL_GPL(getnstimeofday);* This algorithm was first published by Gauss (I think). * * WARNING: this function will overflow on 2106-02-07 06:28:16 on -* machines were long is 32-bit! (However, as time_t is signed, we +* machines where long is 32-bit! (However, as time_t is signed, we * will already get problems at other places on 2038-01-19 03:14:08) */ unsigned long kernel/time/clockevents.c +1
-1@@ -123,7 +123,7 @@ static void clockevents_do_notify(unsigned long reason, void *dev) }/* -* Called after a notify add to make devices availble which were +* Called after a notify add to make devices available which were * released from the notifier call. */ static void clockevents_notify_released (void )kernel/time/timekeeping.c +1
-1@@ -372,7 +372,7 @@ static __always_inline int clocksource_bigadjust(s64 error, s64 *interval,* with losing too many ticks, otherwise we would overadjust and * produce an even larger error. The smaller the adjustment the * faster we try to adjust for it, as lost ticks can do less harm -* here. This is tuned so that an error of about 1 msec is adusted +* here. This is tuned so that an error of about 1 msec is adjusted * within about 1 sec (or 2^20 nsec in 2^SHIFT_HZ ticks). */ error2 = clock->error >> (TICK_LENGTH_SHIFT +22 -2 *SHIFT_HZ );Signature · 1 line
1.5.3.rc7
--
Chris
Quoted 6 lines
Review
Quoted 3 lines
(quoted diff) +1
-1-/* Suppose we want to devide two numbers NOM and DEN: NOM/DEN, the we can +/* Suppose we want to devide two numbers NOM and DEN: NOM/DEN, then we candivide
Yes, I missed it.
Quoted 6 lines
Quoted 2 lines
- * which, buy the way, it can do, but it take more code and at least 2
+ * which, buy the way, it can do, but it takes more code and at least 2by the way
(and does this really add anything to the sentence?)
Thanks for pointing it out :)