x86 boot : Use E820 memory map on EFI 32 platform
PATCH 1/1 x86 boot : Use E820 memory map on EFI 32 platform
Because the EFI memory map are converted to e820 memory map in bootloader, the EFI memory map handling code is removed to clean up.
This patch is based on 2.6.24-rc4-mm1 and has been tested on Intel 32-bit platform with EFI 32 and UEFI 32 firmware.
Signed-off-by Huang Ying <[email protected]>
--- arch/x86/kernel/e820_32.c | 117 +++-------------------------------- arch/x86/kernel/efi_32.c | 150 --------------------------------------------- arch/x86/kernel/setup_32.c | 16 +--- arch/x86/mm/init_32.c | 18 ----- include/asm-x86/e820_32.h | 2 5 files changed, 16 insertions(+), 287 deletions(-)
arch/x86/kernel/e820_32.c +10 -107
@@ -7,7 +7,6 @@#include <linux/kexec.h> #include <linux/module.h> #include <linux/mm.h> -#include <linux/efi.h> #include <linux/pfn.h> #include <linux/uaccess.h> #include <linux/suspend.h>
@@ -181,7 +180,7 @@ static void __init probe_roms(void)* Request address space for all standard RAM and ROM resources * and also for regions reported as reserved by the e820. */ -void __init legacy_init_iomem_resources (struct resource *code_resource, +void __init init_iomem_resources (struct resource *code_resource,struct resource *data_resource,struct resource *bss_resource) {
@@ -261,19 +260,17 @@ void __init add_memory_region(unsigned l {int x; -if (!efi_enabled) { - x = e820.nr_map; + x = e820.nr_map; -if (x ==E820MAX ) { -printk (KERN_ERR "Ooops! Too many entries in the memory map!\n" ); -return ; - } - - e820.map[x].addr = start; - e820.map[x].size = size; - e820.map[x].type = type; - e820.nr_map++; +if (x ==E820MAX ) { +printk (KERN_ERR "Ooops! Too many entries in the memory map!\n" ); +return ; } + + e820.map[x].addr = start; + e820.map[x].size = size; + e820.map[x].type = type; + e820.nr_map++; }/* add_memory_region */ /*
@@ -489,29 +486,6 @@ int __init copy_e820_map(struct e820entr }/* -* Callback for efi_memory_walk. -*/ -static int __init -efi_find_max_pfn (unsigned long start,unsigned long end,void *arg) -{ -unsigned long *max_pfn = arg, pfn; - -if (start < end) { - pfn =PFN_UP (end -1 ); -if (pfn > *max_pfn) - *max_pfn = pfn; - } -return 0 ; -} - -static int __init -efi_memory_present_wrapper (unsigned long start,unsigned long end,void *arg) -{ -memory_present (0 ,PFN_UP (start),PFN_DOWN (end)); -return 0 ; -} - -/* * Find the highest page frame number we have available */ void __init find_max_pfn (void )
@@ -519,11 +493,6 @@ void __init find_max_pfn(void)int i; max_pfn =0 ; -if (efi_enabled) { -efi_memmap_walk (efi_find_max_pfn, &max_pfn); -efi_memmap_walk (efi_memory_present_wrapper,NULL ); -return ; - }for (i =0 ; i < e820.nr_map; i++) {unsigned long start, end;
@@ -541,34 +510,12 @@ void __init find_max_pfn(void) }/* -* Free all available memory for boot time allocation. Used -* as a callback function by efi_memory_walk() -*/ - -static int __init -free_available_memory (unsigned long start,unsigned long end,void *arg) -{ -/* check max_low_pfn */ -if (start >= (max_low_pfn <<PAGE_SHIFT )) -return 0 ; -if (end >= (max_low_pfn <<PAGE_SHIFT )) - end = max_low_pfn <<PAGE_SHIFT ; -if (start < end) -free_bootmem (start, end - start); - -return 0 ; -} -/* * Register fully available low RAM pages with the bootmem allocator. */ void __init register_bootmem_low_pages (unsigned long max_low_pfn) {int i; -if (efi_enabled) { -efi_memmap_walk (free_available_memory,NULL ); -return ; - }for (i =0 ; i < e820.nr_map; i++) {unsigned long curr_pfn, last_pfn, size;/*
@@ -676,56 +623,12 @@ void __init print_memory_map(char *who) } } -static __init __always_inline void efi_limit_regions(unsigned long long size) -{ -unsigned long long current_addr =0 ; -efi_memory_desc_t *md, *next_md; -void *p, *p1; -int i, j; - - j =0 ; - p1 = memmap.map; -for (p = p1, i =0 ; p < memmap.map_end; p += memmap.desc_size, i++) { - md = p; - next_md = p1; - current_addr = md->phys_addr + -PFN_PHYS (md->num_pages); -if (is_available_memory (md)) { -if (md->phys_addr >= size)continue ; -memcpy (next_md, md, memmap.desc_size); -if (current_addr >= size) { - next_md->num_pages -= -PFN_UP (current_addr-size); - } - p1 += memmap.desc_size; - next_md = p1; - j++; - }else if ((md->attribute &EFI_MEMORY_RUNTIME ) == -EFI_MEMORY_RUNTIME ) { -/* In order to make runtime services -* available we have to include runtime -* memory regions in memory map */ -memcpy (next_md, md, memmap.desc_size); - p1 += memmap.desc_size; - next_md = p1; - j++; - } - } - memmap.nr_map = j; - memmap.map_end = memmap.map + - (memmap.nr_map * memmap.desc_size); -} -void __init limit_regions (unsigned long long size) {unsigned long long current_addr;int i;print_memory_map ("limit_regions start" ); -if (efi_enabled) { -efi_limit_regions (size); -return ; - }for (i =0 ; i < e820.nr_map; i++) { current_addr = e820.map[i].addr + e820.map[i].size;if (current_addr < size)
arch/x86/kernel/setup_32.c +5 -11
@@ -647,12 +647,12 @@ void __init setup_arch(char **cmdline_p) rd_doload = ((boot_params.hdr.ram_size &RAMDISK_LOAD_FLAG ) !=0 );#endif ARCH_SETUP + + printk(KERN_INFO "BIOS-provided physical RAM map:\n"); +print_memory_map (memory_setup ()); +if (efi_enabled)efi_init (); - else { -printk (KERN_INFO "BIOS-provided physical RAM map:\n" ); -print_memory_map (memory_setup ()); - }copy_edd ();
@@ -770,14 +770,8 @@ static int __init request_standard_resouint i;printk (KERN_INFO "Setting up standard PCI resources\n" ); -if (efi_enabled) -efi_initialize_iomem_resources (&code_resource, - &data_resource, &bss_resource); -else -legacy_init_iomem_resources (&code_resource, - &data_resource, &bss_resource); +init_iomem_resources (&code_resource, &data_resource, &bss_resource); -/* EFI systems may still have VGA */ request_resource (&iomem_resource, &video_ram_resource);/* request I/O space for devices used on all i[345]86 PCs */
arch/x86/kernel/efi_32.c +0 -150
159 lines not on this page · raw message
arch/x86/mm/init_32.c +0 -18
@@ -27,7 +27,6 @@#include <linux/bootmem.h> #include <linux/slab.h> #include <linux/proc_fs.h> -#include <linux/efi.h> #include <linux/memory_hotplug.h> #include <linux/initrd.h> #include <linux/cpumask.h>
@@ -205,23 +204,6 @@ int page_is_ram(unsigned long pagenr)int i;unsigned long addr, end; -if (efi_enabled) { -efi_memory_desc_t *md; -void *p; - -for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { - md = p; -if (!is_available_memory (md)) -continue ; - addr = (md->phys_addr+PAGE_SIZE -1 ) >>PAGE_SHIFT ; - end = (md->phys_addr + (md->num_pages <<EFI_PAGE_SHIFT )) >>PAGE_SHIFT ; - -if ((pagenr >= addr) && (pagenr < end)) -return 1 ; - } -return 0 ; - } -for (i =0 ; i < e820.nr_map; i++) {if (e820.map[i].type !=E820_RAM )/* not usable memory */
include/asm-x86/e820_32.h +1 -1
@@ -28,7 +28,7 @@ extern void register_bootmem_low_pages(uextern void e820_register_memory (void );extern void limit_regions (unsigned long long size);extern void print_memory_map (char *who); -extern void legacy_init_iomem_resources (struct resource *code_resource, +extern void init_iomem_resources (struct resource *code_resource,struct resource *data_resource,struct resource *bss_resource);