Add RapidIO support to powerpc architecture with memory mapping

new file mode 100644
index 0000000..af2425e
@@ -0,0 +1,932 @@
+/*
+ * MPC85xx RapidIO support
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <[email protected]>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+
+#include <asm/io.h>
+
+#define RIO_REGS_BASE		(CCSRBAR + 0xc0000)
+#define RIO_ATMU_REGS_OFFSET	0x10c00
+#define RIO_MSG_REGS_OFFSET	0x11000
+#define RIO_MAINT_WIN_SIZE	0x400000
+#define RIO_DBELL_WIN_SIZE	0x1000
+
+#define RIO_MSG_OMR_MUI		0x00000002
+#define RIO_MSG_OSR_TE		0x00000080
+#define RIO_MSG_OSR_QOI		0x00000020
+#define RIO_MSG_OSR_QFI		0x00000010
+#define RIO_MSG_OSR_MUB		0x00000004
+#define RIO_MSG_OSR_EOMI	0x00000002
+#define RIO_MSG_OSR_QEI		0x00000001
+
+#define RIO_MSG_IMR_MI		0x00000002
+#define RIO_MSG_ISR_TE		0x00000080
+#define RIO_MSG_ISR_QFI		0x00000010
+#define RIO_MSG_ISR_DIQI	0x00000001
+
+#define RIO_MSG_DESC_SIZE	32
+#define RIO_MSG_BUFFER_SIZE	4096
+#define RIO_MIN_TX_RING_SIZE	2
+#define RIO_MAX_TX_RING_SIZE	2048
+#define RIO_MIN_RX_RING_SIZE	2
+#define RIO_MAX_RX_RING_SIZE	2048
+
+#define DOORBELL_DMR_DI		0x00000002
+#define DOORBELL_DSR_TE		0x00000080
+#define DOORBELL_DSR_QFI	0x00000010
+#define DOORBELL_DSR_DIQI	0x00000001
+#define DOORBELL_TID_OFFSET	0x03
+#define DOORBELL_SID_OFFSET	0x05
+#define DOORBELL_INFO_OFFSET	0x06
+
+#define DOORBELL_MESSAGE_SIZE	0x08
+#define DBELL_SID(x)		(*(u8 *)(x + DOORBELL_SID_OFFSET))
+#define DBELL_TID(x)		(*(u8 *)(x + DOORBELL_TID_OFFSET))
+#define DBELL_INF(x)		(*(u16 *)(x + DOORBELL_INFO_OFFSET))
+
+struct rio_atmu_regs {
+	u32 rowtar;
+	u32 pad1;
+	u32 rowbar;
+	u32 pad2;
+	u32 rowar;
+	u32 pad3[3];
+};
+
+struct rio_msg_regs {
+	u32 omr;
+	u32 osr;
+	u32 pad1;
+	u32 odqdpar;
+	u32 pad2;
+	u32 osar;
+	u32 odpr;
+	u32 odatr;
+	u32 odcr;
+	u32 pad3;
+	u32 odqepar;
+	u32 pad4[13];
+	u32 imr;
+	u32 isr;
+	u32 pad5;
+	u32 ifqdpar;
+	u32 pad6;
+	u32 ifqepar;
+	u32 pad7[250];
+	u32 dmr;
+	u32 dsr;
+	u32 pad8;
+	u32 dqdpar;
+	u32 pad9;
+	u32 dqepar;
+	u32 pad10[26];
+	u32 pwmr;
+	u32 pwsr;
+	u32 pad11;
+	u32 pwqbar;
+};
+
+struct rio_tx_desc {
+	u32 res1;
+	u32 saddr;
+	u32 dport;
+	u32 dattr;
+	u32 res2;
+	u32 res3;
+	u32 dwcnt;
+	u32 res4;
+};
+
+static u32 regs_win;
+static struct rio_atmu_regs *atmu_regs;
+static struct rio_atmu_regs *maint_atmu_regs;
+static struct rio_atmu_regs *dbell_atmu_regs;
+static u32 dbell_win;
+static u32 maint_win;
+static struct rio_msg_regs *msg_regs;
+
+static struct rio_dbell_ring {
+	void *virt;
+	dma_addr_t phys;
+} dbell_ring;
+
+static struct rio_msg_tx_ring {
+	void *virt;
+	dma_addr_t phys;
+	void *virt_buffer[RIO_MAX_TX_RING_SIZE];
+	dma_addr_t phys_buffer[RIO_MAX_TX_RING_SIZE];
+	int tx_slot;
+	int size;
+	void *dev_id;
+} msg_tx_ring;
+
+static struct rio_msg_rx_ring {
+	void *virt;
+	dma_addr_t phys;
+	void *virt_buffer[RIO_MAX_RX_RING_SIZE];
+	int rx_slot;
+	int size;
+	void *dev_id;
+} msg_rx_ring;
+
+/**
+ * mpc85xx_rio_doorbell_send - Send a MPC85xx doorbell message
+ * @index: ID of RapidIO interface
+ * @destid: Destination ID of target device
+ * @data: 16-bit info field of RapidIO doorbell message
+ *
+ * Sends a MPC85xx doorbell message. Returns %0 on success or
+ * %-EINVAL on failure.
+ */
+static int mpc85xx_rio_doorbell_send(int index, u16 destid, u16 data)
+{
+	pr_debug("mpc85xx_doorbell_send: index %d destid %4.4x data %4.4x\n",
+		 index, destid, data);
+	out_be32((void *)&dbell_atmu_regs->rowtar, destid << 22);
+	out_be16((void *)(dbell_win), data);
+
+	return 0;
+}
+
+/**
+ * mpc85xx_local_config_read - Generate a MPC85xx local config space read
+ * @index: ID of RapdiIO interface
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Value to be read into
+ *
+ * Generates a MPC85xx local configuration space read. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int mpc85xx_local_config_read(int index, u32 offset, int len, u32 * data)
+{
+	pr_debug("mpc85xx_local_config_read: index %d offset %8.8x\n", index,
+		 offset);
+	*data = in_be32((void *)(regs_win + offset));
+
+	return 0;
+}
+
+/**
+ * mpc85xx_local_config_write - Generate a MPC85xx local config space write
+ * @index: ID of RapdiIO interface
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Value to be written
+ *
+ * Generates a MPC85xx local configuration space write. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int mpc85xx_local_config_write(int index, u32 offset, int len, u32 data)
+{
+	pr_debug
+	    ("mpc85xx_local_config_write: index %d offset %8.8x data %8.8x\n",
+	     index, offset, data);
+	out_be32((void *)(regs_win + offset), data);
+
+	return 0;
+}
+
+/**
+ * mpc85xx_rio_config_read - Generate a MPC85xx read maintenance transaction
+ * @index: ID of RapdiIO interface
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @val: Location to be read into
+ *
+ * Generates a MPC85xx read maintenance transaction. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int
+mpc85xx_rio_config_read(int index, u16 destid, u8 hopcount, u32 offset, int len,
+			u32 * val)
+{
+	u8 *data;
+
+	pr_debug
+	    ("mpc85xx_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n",
+	     index, destid, hopcount, offset, len);
+	out_be32((void *)&maint_atmu_regs->rowtar,
+		 (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9));
+
+	data = (u8 *) maint_win + offset;
+	switch (len) {
+	case 1:
+		*val = in_8((u8 *) data);
+		break;
+	case 2:
+		*val = in_be16((u16 *) data);
+		break;
+	default:
+		*val = in_be32((u32 *) data);
+		break;
+	}
+
+	return 0;
+}
+
+/**
+ * mpc85xx_rio_config_write - Generate a MPC85xx write maintenance transaction
+ * @index: ID of RapdiIO interface
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @val: Value to be written
+ *
+ * Generates an MPC85xx write maintenance transaction. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int
+mpc85xx_rio_config_write(int index, u16 destid, u8 hopcount, u32 offset,
+			 int len, u32 val)
+{
+	u8 *data;
+	pr_debug
+	    ("mpc85xx_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
+	     index, destid, hopcount, offset, len, val);
+	out_be32((void *)&maint_atmu_regs->rowtar,
+		 (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9));
+
+	data = (u8 *) maint_win + offset;
+	switch (len) {
+	case 1:
+		out_8((u8 *) data, val);
+		break;
+	case 2:
+		out_be16((u16 *) data, val);
+		break;
+	default:
+		out_be32((u32 *) data, val);
+		break;
+	}
+
+	return 0;
+}
+
+/**
+ * rio_hw_add_outb_message - Add message to the MPC85xx outbound message queue
+ * @mport: Master port with outbound message queue
+ * @rdev: Target of outbound message
+ * @mbox: Outbound mailbox
+ * @buffer: Message to add to outbound queue
+ * @len: Length of message
+ *
+ * Adds the @buffer message to the MPC85xx outbound message queue. Returns
+ * %0 on success or %-EINVAL on failure.
+ */
+int
+rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
+			void *buffer, size_t len)
+{
+	u32 omr;
+	struct rio_tx_desc *desc =
+	    (struct rio_tx_desc *)msg_tx_ring.virt + msg_tx_ring.tx_slot;
+	int ret = 0;
+
+	pr_debug
+	    ("RIO: rio_hw_add_outb_message(): destid %4.4x mbox %d buffer %8.8x len %8.8x\n",
+	     rdev->destid, mbox, (int)buffer, len);
+
+	if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* Copy and clear rest of buffer */
+	memcpy(msg_tx_ring.virt_buffer[msg_tx_ring.tx_slot], buffer, len);
+	if (len < (RIO_MAX_MSG_SIZE - 4))
+		memset((void *)((u32) msg_tx_ring.
+				virt_buffer[msg_tx_ring.tx_slot] + len), 0,
+		       RIO_MAX_MSG_SIZE - len);
+
+	/* Set mbox field for message */
+	desc->dport = mbox & 0x3;
+
+	/* Enable EOMI interrupt, set priority, and set destid */
+	desc->dattr = 0x28000000 | (rdev->destid << 2);
+
+	/* Set transfer size aligned to next power of 2 (in double words) */
+	desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len);
+
+	/* Set snooping and source buffer address */
+	desc->saddr = 0x00000004 | msg_tx_ring.phys_buffer[msg_tx_ring.tx_slot];
+
+	/* Increment enqueue pointer */
+	omr = in_be32((void *)&msg_regs->omr);
+	out_be32((void *)&msg_regs->omr, omr | RIO_MSG_OMR_MUI);
+
+	/* Go to next descriptor */
+	if (++msg_tx_ring.tx_slot == msg_tx_ring.size)
+		msg_tx_ring.tx_slot = 0;
+
+      out:
+	return ret;
+}
+
+EXPORT_SYMBOL_GPL(rio_hw_add_outb_message);
+
+/**
+ * mpc85xx_rio_tx_handler - MPC85xx outbound message interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles outbound message interrupts. Executes a register outbound
+ * mailbox event handler and acks the interrupt occurrence.
+ */
+static irqreturn_t
+mpc85xx_rio_tx_handler(int irq, void *dev_instance)
+{
+	int osr;
+	struct rio_mport *port = (struct rio_mport *)dev_instance;
+
+	osr = in_be32((void *)&msg_regs->osr);
+
+	if (osr & RIO_MSG_OSR_TE) {
+		pr_info("RIO: outbound message transmission error\n");
+		out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_TE);
+		goto out;
+	}
+
+	if (osr & RIO_MSG_OSR_QOI) {
+		pr_info("RIO: outbound message queue overflow\n");
+		out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_QOI);
+		goto out;
+	}
+
+	if (osr & RIO_MSG_OSR_EOMI) {
+		u32 dqp = in_be32((void *)&msg_regs->odqdpar);
+		int slot = (dqp - msg_tx_ring.phys) >> 5;
+		port->outb_msg[0].mcback(port, msg_tx_ring.dev_id, -1, slot);
+
+		/* Ack the end-of-message interrupt */
+		out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_EOMI);
+	}
+
+      out:
+	return IRQ_HANDLED;
+}
+
+/**
+ * rio_open_outb_mbox - Initialize MPC85xx outbound mailbox
+ * @mport: Master port implementing the outbound message unit
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the outbound mailbox ring
+ *
+ * Initializes buffer ring, request the outbound message interrupt,
+ * and enables the outbound message unit. Returns %0 on success and
+ * %-EINVAL or %-ENOMEM on failure.
+ */
+int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
+{
+	int i, j, rc = 0;
+
+	if ((entries < RIO_MIN_TX_RING_SIZE) ||
+	    (entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	/* Initialize shadow copy ring */
+	msg_tx_ring.dev_id = dev_id;
+	msg_tx_ring.size = entries;
+
+	for (i = 0; i < msg_tx_ring.size; i++) {
+		if (!
+		    (msg_tx_ring.virt_buffer[i] =
+		     dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+					&msg_tx_ring.phys_buffer[i],
+					GFP_KERNEL))) {
+			rc = -ENOMEM;
+			for (j = 0; j < msg_tx_ring.size; j++)
+				if (msg_tx_ring.virt_buffer[j])
+					dma_free_coherent(NULL,
+							  RIO_MSG_BUFFER_SIZE,
+							  msg_tx_ring.
+							  virt_buffer[j],
+							  msg_tx_ring.
+							  phys_buffer[j]);
+			goto out;
+		}
+	}
+
+	/* Initialize outbound message descriptor ring */
+	if (!(msg_tx_ring.virt = dma_alloc_coherent(NULL,
+						    msg_tx_ring.size *
+						    RIO_MSG_DESC_SIZE,
+						    &msg_tx_ring.phys,
+						    GFP_KERNEL))) {
+		rc = -ENOMEM;
+		goto out_dma;
+	}
+	memset(msg_tx_ring.virt, 0, msg_tx_ring.size * RIO_MSG_DESC_SIZE);
+	msg_tx_ring.tx_slot = 0;
+
+	/* Point dequeue/enqueue pointers at first entry in ring */
+	out_be32((void *)&msg_regs->odqdpar, msg_tx_ring.phys);
+	out_be32((void *)&msg_regs->odqepar, msg_tx_ring.phys);
+
+	/* Configure for snooping */
+	out_be32((void *)&msg_regs->osar, 0x00000004);
+
+	/* Clear interrupt status */
+	out_be32((void *)&msg_regs->osr, 0x000000b3);
+
+	/* Hook up outbound message handler */
+	if ((rc =
+	     request_irq(MPC85xx_IRQ_RIO_TX, mpc85xx_rio_tx_handler, 0,
+			 "msg_tx", (void *)mport)) < 0)
+		goto out_irq;
+
+	/*
+	 * Configure outbound message unit
+	 *      Snooping
+	 *      Interrupts (all enabled, except QEIE)
+	 *      Chaining mode
+	 *      Disable
+	 */
+	out_be32((void *)&msg_regs->omr, 0x00100220);
+
+	/* Set number of entries */
+	out_be32((void *)&msg_regs->omr,
+		 in_be32((void *)&msg_regs->omr) |
+		 ((get_bitmask_order(entries) - 2) << 12));
+
+	/* Now enable the unit */
+	out_be32((void *)&msg_regs->omr, in_be32((void *)&msg_regs->omr) | 0x1);
+
+      out:
+	return rc;
+
+      out_irq:
+	dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+			  msg_tx_ring.virt, msg_tx_ring.phys);
+
+      out_dma:
+	for (i = 0; i < msg_tx_ring.size; i++)
+		dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+				  msg_tx_ring.virt_buffer[i],
+				  msg_tx_ring.phys_buffer[i]);
+
+	return rc;
+}
+
+/**
+ * rio_close_outb_mbox - Shut down MPC85xx outbound mailbox
+ * @mport: Master port implementing the outbound message unit
+ * @mbox: Mailbox to close
+ *
+ * Disables the outbound message unit, free all buffers, and
+ * frees the outbound message interrupt.
+ */
+void rio_close_outb_mbox(struct rio_mport *mport, int mbox)
+{
+	/* Disable inbound message unit */
+	out_be32((void *)&msg_regs->omr, 0);
+
+	/* Free ring */
+	dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+			  msg_tx_ring.virt, msg_tx_ring.phys);
+
+	/* Free interrupt */
+	free_irq(MPC85xx_IRQ_RIO_TX, (void *)mport);
+}
+
+/**
+ * mpc85xx_rio_rx_handler - MPC85xx inbound message interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles inbound message interrupts. Executes a registered inbound
+ * mailbox event handler and acks the interrupt occurrence.
+ */
+static irqreturn_t
+mpc85xx_rio_rx_handler(int irq, void *dev_instance)
+{
+	int isr;
+	struct rio_mport *port = (struct rio_mport *)dev_instance;
+
+	isr = in_be32((void *)&msg_regs->isr);
+
+	if (isr & RIO_MSG_ISR_TE) {
+		pr_info("RIO: inbound message reception error\n");
+		out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_TE);
+		goto out;
+	}
+
+	/* XXX Need to check/dispatch until queue empty */
+	if (isr & RIO_MSG_ISR_DIQI) {
+		/*
+		 * We implement *only* mailbox 0, but can receive messages
+		 * for any mailbox/letter to that mailbox destination. So,
+		 * make the callback with an unknown/invalid mailbox number
+		 * argument.
+		 */
+		port->inb_msg[0].mcback(port, msg_rx_ring.dev_id, -1, -1);
+
+		/* Ack the queueing interrupt */
+		out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_DIQI);
+	}
+
+      out:
+	return IRQ_HANDLED;
+}
+
+/**
+ * rio_open_inb_mbox - Initialize MPC85xx inbound mailbox
+ * @mport: Master port implementing the inbound message unit
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the inbound mailbox ring
+ *
+ * Initializes buffer ring, request the inbound message interrupt,
+ * and enables the inbound message unit. Returns %0 on success
+ * and %-EINVAL or %-ENOMEM on failure.
+ */
+int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
+{
+	int i, rc = 0;
+
+	if ((entries < RIO_MIN_RX_RING_SIZE) ||
+	    (entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	/* Initialize client buffer ring */
+	msg_rx_ring.dev_id = dev_id;
+	msg_rx_ring.size = entries;
+	msg_rx_ring.rx_slot = 0;
+	for (i = 0; i < msg_rx_ring.size; i++)
+		msg_rx_ring.virt_buffer[i] = NULL;
+
+	/* Initialize inbound message ring */
+	if (!(msg_rx_ring.virt = dma_alloc_coherent(NULL,
+						    msg_rx_ring.size *
+						    RIO_MAX_MSG_SIZE,
+						    &msg_rx_ring.phys,
+						    GFP_KERNEL))) {
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	/* Point dequeue/enqueue pointers at first entry in ring */
+	out_be32((void *)&msg_regs->ifqdpar, (u32) msg_rx_ring.phys);
+	out_be32((void *)&msg_regs->ifqepar, (u32) msg_rx_ring.phys);
+
+	/* Clear interrupt status */
+	out_be32((void *)&msg_regs->isr, 0x00000091);
+
+	/* Hook up inbound message handler */
+	if ((rc =
+	     request_irq(MPC85xx_IRQ_RIO_RX, mpc85xx_rio_rx_handler, 0,
+			 "msg_rx", (void *)mport)) < 0) {
+		dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+				  msg_tx_ring.virt_buffer[i],
+				  msg_tx_ring.phys_buffer[i]);
+		goto out;
+	}
+
+	/*
+	 * Configure inbound message unit:
+	 *      Snooping
+	 *      4KB max message size
+	 *      Unmask all interrupt sources
+	 *      Disable
+	 */
+	out_be32((void *)&msg_regs->imr, 0x001b0060);
+
+	/* Set number of queue entries */
+	out_be32((void *)&msg_regs->imr,
+		 in_be32((void *)&msg_regs->imr) |
+		 ((get_bitmask_order(entries) - 2) << 12));
+
+	/* Now enable the unit */
+	out_be32((void *)&msg_regs->imr, in_be32((void *)&msg_regs->imr) | 0x1);
+
+      out:
+	return rc;
+}
+
+/**
+ * rio_close_inb_mbox - Shut down MPC85xx inbound mailbox
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Mailbox to close
+ *
+ * Disables the inbound message unit, free all buffers, and
+ * frees the inbound message interrupt.
+ */
+void rio_close_inb_mbox(struct rio_mport *mport, int mbox)
+{
+	/* Disable inbound message unit */
+	out_be32((void *)&msg_regs->imr, 0);
+
+	/* Free ring */
+	dma_free_coherent(NULL, msg_rx_ring.size * RIO_MAX_MSG_SIZE,
+			  msg_rx_ring.virt, msg_rx_ring.phys);
+
+	/* Free interrupt */
+	free_irq(MPC85xx_IRQ_RIO_RX, (void *)mport);
+}
+
+/**
+ * rio_hw_add_inb_buffer - Add buffer to the MPC85xx inbound message queue
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Inbound mailbox number
+ * @buf: Buffer to add to inbound queue
+ *
+ * Adds the @buf buffer to the MPC85xx inbound message queue. Returns
+ * %0 on success or %-EINVAL on failure.
+ */
+int rio_hw_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
+{
+	int rc = 0;
+
+	pr_debug("RIO: rio_hw_add_inb_buffer(), msg_rx_ring.rx_slot %d\n",
+		 msg_rx_ring.rx_slot);
+
+	if (msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot]) {
+		printk(KERN_ERR
+		       "RIO: error adding inbound buffer %d, buffer exists\n",
+		       msg_rx_ring.rx_slot);
+		rc = -EINVAL;
+		goto out;
+	}
+
+	msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot] = buf;
+	if (++msg_rx_ring.rx_slot == msg_rx_ring.size)
+		msg_rx_ring.rx_slot = 0;
+
+      out:
+	return rc;
+}
+
+EXPORT_SYMBOL_GPL(rio_hw_add_inb_buffer);
+
+/**
+ * rio_hw_get_inb_message - Fetch inbound message from the MPC85xx message unit
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Inbound mailbox number
+ *
+ * Gets the next available inbound message from the inbound message queue.
+ * A pointer to the message is returned on success or NULL on failure.
+ */
+void *rio_hw_get_inb_message(struct rio_mport *mport, int mbox)
+{
+	u32 imr;
+	u32 phys_buf, virt_buf;
+	void *buf = NULL;
+	int buf_idx;
+
+	phys_buf = in_be32((void *)&msg_regs->ifqdpar);
+
+	/* If no more messages, then bail out */
+	if (phys_buf == in_be32((void *)&msg_regs->ifqepar))
+		goto out2;
+
+	virt_buf = (u32) msg_rx_ring.virt + (phys_buf - msg_rx_ring.phys);
+	buf_idx = (phys_buf - msg_rx_ring.phys) / RIO_MAX_MSG_SIZE;
+	buf = msg_rx_ring.virt_buffer[buf_idx];
+
+	if (!buf) {
+		printk(KERN_ERR
+		       "RIO: inbound message copy failed, no buffers\n");
+		goto out1;
+	}
+
+	/* Copy max message size, caller is expected to allocate that big */
+	memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE);
+
+	/* Clear the available buffer */
+	msg_rx_ring.virt_buffer[buf_idx] = NULL;
+
+      out1:
+	imr = in_be32((void *)&msg_regs->imr);
+	out_be32((void *)&msg_regs->imr, imr | RIO_MSG_IMR_MI);
+
+      out2:
+	return buf;
+}
+
+EXPORT_SYMBOL_GPL(rio_hw_get_inb_message);
+
+/**
+ * mpc85xx_rio_dbell_handler - MPC85xx doorbell interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles doorbell interrupts. Parses a list of registered
+ * doorbell event handlers and executes a matching event handler.
+ */
+static irqreturn_t
+mpc85xx_rio_dbell_handler(int irq, void *dev_instance)
+{
+	int dsr;
+	struct rio_mport *port = (struct rio_mport *)dev_instance;
+
+	dsr = in_be32((void *)&msg_regs->dsr);
+
+	if (dsr & DOORBELL_DSR_TE) {
+		pr_info("RIO: doorbell reception error\n");
+		out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_TE);
+		goto out;
+	}
+
+	if (dsr & DOORBELL_DSR_QFI) {
+		pr_info("RIO: doorbell queue full\n");
+		out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_QFI);
+		goto out;
+	}
+
+	/* XXX Need to check/dispatch until queue empty */
+	if (dsr & DOORBELL_DSR_DIQI) {
+		u32 dmsg =
+		    (u32) dbell_ring.virt +
+		    (in_be32((void *)&msg_regs->dqdpar) & 0xfff);
+		u32 dmr;
+		struct rio_dbell *dbell;
+		int found = 0;
+
+		pr_debug
+		    ("RIO: processing doorbell, sid %2.2x tid %2.2x info %4.4x\n",
+		     DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
+
+		list_for_each_entry(dbell, &port->dbells, node) {
+			if ((dbell->res->start <= DBELL_INF(dmsg)) &&
+			    (dbell->res->end >= DBELL_INF(dmsg))) {
+				found = 1;
+				break;
+			}
+		}
+		if (found) {
+			dbell->dinb(port, dbell->dev_id, DBELL_SID(dmsg), DBELL_TID(dmsg),
+				    DBELL_INF(dmsg));
+		} else {
+			pr_debug
+			    ("RIO: spurious doorbell, sid %2.2x tid %2.2x info %4.4x\n",
+			     DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
+		}
+		dmr = in_be32((void *)&msg_regs->dmr);
+		out_be32((void *)&msg_regs->dmr, dmr | DOORBELL_DMR_DI);
+		out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_DIQI);
+	}
+
+      out:
+	return IRQ_HANDLED;
+}
+
+/**
+ * mpc85xx_rio_doorbell_init - MPC85xx doorbell interface init
+ * @mport: Master port implementing the inbound doorbell unit
+ *
+ * Initializes doorbell unit hardware and inbound DMA buffer
+ * ring. Called from mpc85xx_rio_setup(). Returns %0 on success
+ * or %-ENOMEM on failure.
+ */
+static int mpc85xx_rio_doorbell_init(struct rio_mport *mport)
+{
+	int rc = 0;
+
+	/* Map outbound doorbell window immediately after maintenance window */
+	if (!(dbell_win =
+	      (u32) ioremap(mport->iores.start + RIO_MAINT_WIN_SIZE,
+			    RIO_DBELL_WIN_SIZE))) {
+		printk(KERN_ERR
+		       "RIO: unable to map outbound doorbell window\n");
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	/* Initialize inbound doorbells */
+	if (!(dbell_ring.virt = dma_alloc_coherent(NULL,
+						   512 * DOORBELL_MESSAGE_SIZE,
+						   &dbell_ring.phys,
+						   GFP_KERNEL))) {
+		printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n");
+		rc = -ENOMEM;
+		iounmap((void *)dbell_win);
+		goto out;
+	}
+
+	/* Point dequeue/enqueue pointers at first entry in ring */
+	out_be32((void *)&msg_regs->dqdpar, (u32) dbell_ring.phys);
+	out_be32((void *)&msg_regs->dqepar, (u32) dbell_ring.phys);
+
+	/* Clear interrupt status */
+	out_be32((void *)&msg_regs->dsr, 0x00000091);
+
+	/* Hook up doorbell handler */
+	if ((rc =
+	     request_irq(MPC85xx_IRQ_RIO_BELL, mpc85xx_rio_dbell_handler, 0,
+			 "dbell_rx", (void *)mport) < 0)) {
+		iounmap((void *)dbell_win);
+		dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE,
+				  dbell_ring.virt, dbell_ring.phys);
+		printk(KERN_ERR
+		       "MPC85xx RIO: unable to request inbound doorbell irq");
+		goto out;
+	}
+
+	/* Configure doorbells for snooping, 512 entries, and enable */
+	out_be32((void *)&msg_regs->dmr, 0x00108161);
+
+      out:
+	return rc;
+}
+
+static char *cmdline = NULL;
+
+static int mpc85xx_rio_get_hdid(int index)
+{
+	/* XXX Need to parse multiple entries in some format */
+	if (!cmdline)
+		return -1;
+
+	return simple_strtol(cmdline, NULL, 0);
+}
+
+static int mpc85xx_rio_get_cmdline(char *s)
+{
+	if (!s)
+		return 0;
+
+	cmdline = s;
+	return 1;
+}
+
+__setup("riohdid=", mpc85xx_rio_get_cmdline);
+
+/**
+ * mpc85xx_rio_setup - Setup MPC85xx RapidIO interface
+ * @law_start: Starting physical address of RapidIO LAW
+ * @law_size: Size of RapidIO LAW
+ *
+ * Initializes MPC85xx RapidIO hardware interface, configures
+ * master port with system-specific info, and registers the
+ * master port with the RapidIO subsystem.
+ */
+void mpc85xx_rio_setup(int law_start, int law_size)
+{
+	struct rio_ops *ops;
+	struct rio_mport *port;
+
+	ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL);
+	ops->lcread = mpc85xx_local_config_read;
+	ops->lcwrite = mpc85xx_local_config_write;
+	ops->cread = mpc85xx_rio_config_read;
+	ops->cwrite = mpc85xx_rio_config_write;
+	ops->dsend = mpc85xx_rio_doorbell_send;
+
+	port = kmalloc(sizeof(struct rio_mport), GFP_KERNEL);
+	port->id = 0;
+	port->index = 0;
+	INIT_LIST_HEAD(&port->dbells);
+	port->iores.start = law_start;
+	port->iores.end = law_start + law_size;
+	port->iores.flags = IORESOURCE_MEM;
+
+	rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
+	rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0);
+	rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
+	strcpy(port->name, "RIO0 mport");
+
+	port->ops = ops;
+	port->host_deviceid = mpc85xx_rio_get_hdid(port->id);
+
+	rio_register_mport(port);
+
+	regs_win = (u32) ioremap(RIO_REGS_BASE, 0x20000);
+	atmu_regs = (struct rio_atmu_regs *)(regs_win + RIO_ATMU_REGS_OFFSET);
+	maint_atmu_regs = atmu_regs + 1;
+	dbell_atmu_regs = atmu_regs + 2;
+	msg_regs = (struct rio_msg_regs *)(regs_win + RIO_MSG_REGS_OFFSET);
+
+	/* Configure maintenance transaction window */
+	out_be32((void *)&maint_atmu_regs->rowbar, 0x000c0000);
+	out_be32((void *)&maint_atmu_regs->rowar, 0x80077015);
+
+	maint_win = (u32) ioremap(law_start, RIO_MAINT_WIN_SIZE);
+
+	/* Configure outbound doorbell window */
+	out_be32((void *)&dbell_atmu_regs->rowbar, 0x000c0400);
+	out_be32((void *)&dbell_atmu_regs->rowar, 0x8004200b);
+	mpc85xx_rio_doorbell_init(port);
+}

1,664 lines not on this page · raw message

index 8b56bbd..a3824ba 100644
@@ -48,7 +48,7 @@ int __rio_local_read_config_##size \
 	u32 data = 0;							\
 	if (RIO_##size##_BAD) return RIO_BAD_SIZE;			\
 	spin_lock_irqsave(&rio_config_lock, flags);			\
-	res = mport->ops->lcread(mport->id, offset, len, &data);	\
+	res = mport->ops->lcread(mport, mport->id, offset, len, &data);	\
 	*value = (type)data;						\
 	spin_unlock_irqrestore(&rio_config_lock, flags);		\
 	return res;							\

@@ -71,7 +71,7 @@ int __rio_local_write_config_##size \
 	unsigned long flags;						\
 	if (RIO_##size##_BAD) return RIO_BAD_SIZE;			\
 	spin_lock_irqsave(&rio_config_lock, flags);			\
-	res = mport->ops->lcwrite(mport->id, offset, len, value);	\
+	res = mport->ops->lcwrite(mport, mport->id, offset, len, value);\
 	spin_unlock_irqrestore(&rio_config_lock, flags);		\
 	return res;							\
 }

@@ -108,7 +108,7 @@ int rio_mport_read_config_##size \
 	u32 data = 0;							\
 	if (RIO_##size##_BAD) return RIO_BAD_SIZE;			\
 	spin_lock_irqsave(&rio_config_lock, flags);			\
-	res = mport->ops->cread(mport->id, destid, hopcount, offset, len, &data); \
+	res = mport->ops->cread(mport, mport->id, destid, hopcount, offset, len, &data); \
 	*value = (type)data;						\
 	spin_unlock_irqrestore(&rio_config_lock, flags);		\
 	return res;							\

@@ -131,7 +131,7 @@ int rio_mport_write_config_##size \
 	unsigned long flags;						\
 	if (RIO_##size##_BAD) return RIO_BAD_SIZE;			\
 	spin_lock_irqsave(&rio_config_lock, flags);			\
-	res = mport->ops->cwrite(mport->id, destid, hopcount, offset, len, value); \
+	res = mport->ops->cwrite(mport, mport->id, destid, hopcount, offset, len, value); \
 	spin_unlock_irqrestore(&rio_config_lock, flags);		\
 	return res;							\
 }

@@ -166,7 +166,7 @@ int rio_mport_send_doorbell(struct rio_mport *mport, u16 destid, u16 data)
 	unsigned long flags;
 
 	spin_lock_irqsave(&rio_doorbell_lock, flags);
-	res = mport->ops->dsend(mport->id, destid, data);
+	res = mport->ops->dsend(mport, mport->id, destid, data);
 	spin_unlock_irqrestore(&rio_doorbell_lock, flags);
 
 	return res;

149 lines not on this page · raw message

index 659e311..97a147f 100644
@@ -43,7 +43,8 @@ static ssize_t routes_show(struct device *dev, struct device_attribute *attr, ch
 	if (!rdev->rswitch)
 		goto out;
 
-	for (i = 0; i < RIO_MAX_ROUTE_ENTRIES; i++) {
+	for (i = 0; i < RIO_MAX_ROUTE_ENTRIES(rdev->net->hport->sys_size);
+			i++) {
 		if (rdev->rswitch->route_table[i] == RIO_INVALID_ROUTE)
 			continue;
 		str +=

532 lines not on this page · raw message

index b242cee..7a3b62e 100644
@@ -51,10 +51,5 @@ extern struct rio_route_ops __end_rio_route_ops[];
 	DECLARE_RIO_ROUTE_SECTION(.rio_route_ops,			\
 			vid, did, add_hook, get_hook)
 
-#ifdef CONFIG_RAPIDIO_8_BIT_TRANSPORT
-#define RIO_GET_DID(x)	((x & 0x00ff0000) >> 16)
-#define RIO_SET_DID(x)	((x & 0x000000ff) << 16)
-#else
-#define RIO_GET_DID(x)	(x & 0xffff)
-#define RIO_SET_DID(x)	(x & 0xffff)
-#endif
+#define RIO_GET_DID(size, x)	(size ? (x & 0xffff) : ((x & 0x00ff0000) >> 16))
+#define RIO_SET_DID(size, x)	(size ? (x & 0xffff) : ((x & 0x000000ff) << 16))

383 lines not on this page · raw message

120 lines not on this page · raw message

41 lines not on this page · raw message

476 lines not on this page · raw message