Cross compiling alsa-lib (again)
Well, I searched through 96 weeks of archived alsa-devel postings to get to this one:
http://article.gmane.org/gmane.linux.alsa.devel/37120
(Which shows I am doing the right thing in any case.)
This post recommends this:
CFLAGS="-Os -m4 -ml" ./configure --prefix=/usr --host=sh4-unknown-linux-gnu --target=sh4-unknown-linux-gnu --build=i686-pc-linux-gnu
I admit to not using the additional cflags stuff before, but even if I use this:
CFLAGS="-Os -m4 -ml" ./configure --host=sh4-linux --prefix=/usr CC=/home/adrian/dreamy-linux/buildroot/build_sh4/staging_dir/bin/sh4-linux-gcc --disable-python --disable-rawmidi --enable-static --with-confdir=/home/adrian/dreamy-linux/buildroot/project_build_sh4/dreamcast/root/usr/share/alsa
--disable-mixer --enable-static=yes --enable-shared=no
--target=sh4-linux --build=i686-linux
Followed by:
make and
make DESTDIR=/home/adrian/dreamy-linux/buildroot/project_build_sh4/dreamcast/root install
I still get this:
$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: AICA [AICA], device 0: AICA PCM [AICA PCM] Subdevices: 1/1 Subdevice #0: subdevice #0
Followed by:
$ aplay -L
null
Discard all samples (playback) or generate zero samples (capture)$ aplay /aine-email.wav Playing WAVE '/aine-email.wav' : Unsigned 8 bit, Rate 8000 Hz, Mono ALSA lib pcm_plug.c:773:(snd_pcm_plug_hw_refine_schange) Unable to find an usable access for '(null)' aplay: set_params:895: Access type not available
$ aplay -D hw:0,0 /aine-email.wav Playing WAVE '/aine-email.wav' : Unsigned 8 bit, Rate 8000 Hz, Mono aplay: set_params:895: Access type not available
Just as before. Any clues?
Quoted 9 lines · Adrian McMenamin
I admit to not using the additional cflags stuff before, but even if I use this:
CFLAGS="-Os -m4 -ml" ./configure --host=sh4-linux --prefix=/usr CC=/home/adrian/dreamy-linux/buildroot/build_sh4/staging_dir/bin/sh4-linux-gcc --disable-python --disable-rawmidi --enable-static --with-confdir=/home/adrian/dreamy-linux/buildroot/project_build_sh4/dreamcast/root/usr/share/alsa
--disable-mixer --enable-static=yes --enable-shared=no
--target=sh4-linux --build=i686-linux
What if you omit the --confdir arg?
Lee
Quoted 11 lines · Lee Revell
Quoted 9 lines · Adrian McMenamin
I admit to not using the additional cflags stuff before, but even if I use this:
CFLAGS="-Os -m4 -ml" ./configure --host=sh4-linux --prefix=/usr CC=/home/adrian/dreamy-linux/buildroot/build_sh4/staging_dir/bin/sh4-linux-gcc --disable-python --disable-rawmidi --enable-static --with-confdir=/home/adrian/dreamy-linux/buildroot/project_build_sh4/dreamcast/root/usr/share/alsa
--disable-mixer --enable-static=yes --enable-shared=no
--target=sh4-linux --build=i686-linux
Quoted 2 lines
What if you omit the --confdir arg?
Just the same :(
Quoted 12 lines · Adrian McMenamin
Quoted 11 lines · Lee Revell
Quoted 9 lines · Adrian McMenamin
I admit to not using the additional cflags stuff before, but even if I use this:
CFLAGS="-Os -m4 -ml" ./configure --host=sh4-linux --prefix=/usr CC=/home/adrian/dreamy-linux/buildroot/build_sh4/staging_dir/bin/sh4-linux-gcc --disable-python --disable-rawmidi --enable-static --with-confdir=/home/adrian/dreamy-linux/buildroot/project_build_sh4/dreamcast/root/usr/share/alsa
--disable-mixer --enable-static=yes --enable-shared=no
--target=sh4-linux --build=i686-linux
Quoted 3 lines
Quoted 2 lines
What if you omit the --confdir arg?
Just the same :(
Anything interesting in strace output?
Signature · 1 line
ml.
Quoted 4 lines · Adrian McMenamin
Well, I searched through 96 weeks of archived alsa-devel postings to get to this one:
Sorry I was unable to point you to the exact posting. I looked for it and I seem to have deleted all my scripts from that project.
Lee
Quoted 3 lines · Adrian McMenamin
$ aplay -D hw:0,0 /aine-email.wav Playing WAVE '/aine-email.wav' : Unsigned 8 bit, Rate 8000 Hz, Mono aplay: set_params:895: Access type not available
This error message indicates that:
1) the "hw" plugin was found, i.e., the configuration files are installed correctly and are found by alsa-lib; and
2) the driver apparently didn't set the SNDRV_PCM_INFO_INTERLEAVED flag.
HTH
Clemens
Quoted 5 lines · Clemens Ladisch
Quoted 3 lines · Adrian McMenamin
$ aplay -D hw:0,0 /aine-email.wav Playing WAVE '/aine-email.wav' : Unsigned 8 bit, Rate 8000 Hz, Mono aplay: set_params:895: Access type not available
Quoted 9 lines
This error message indicates that:
1) the "hw" plugin was found, i.e., the configuration files are installed correctly and are found by alsa-lib; and
2) the driver apparently didn't set theSNDRV_PCM_INFO_INTERLEAVEDflag.HTH
Clemens
Well this is from the driver:
.info = (SNDRV_PCM_INFO_NONINTERLEAVED),
Is it required to set SNDRV_PCM_INFO_INTERLEAVED ? Even if the hardware doesn't support it? Surely alsa-lib is supposed to handle the conversion in any case?
Quoted 7 lines · Adrian McMenamin
Well this is from the driver:
.info = (
SNDRV_PCM_INFO_NONINTERLEAVED),Is it required to set
SNDRV_PCM_INFO_INTERLEAVED? Even if the hardware doesn't support it? Surely alsa-lib is supposed to handle the conversion in any case?
It should if you use aplay -D plughw:0,0 file.wav.
Lee
Quoted 5 lines · Lee Revell
Quoted 4 lines · Adrian McMenamin
Well this is from the driver:
.info = (
SNDRV_PCM_INFO_NONINTERLEAVED),
Quoted 8 lines
Quoted 3 lines
Is it required to set
SNDRV_PCM_INFO_INTERLEAVED? Even if the hardware doesn't support it? Surely alsa-lib is supposed to handle the conversion in any case?It should if you use aplay -D plughw:0,0 file.wav.
Lee
Well, get this now:
$ aplay -D plughw:0,0 /aine-email.wav Playing WAVE '/aine-email.wav' : Unsigned 8 bit, Rate 8000 Hz, Mono ALSA lib pcm_plug.c:773:(snd_pcm_plug_hw_refine_schange) Unable to find an usable access for 'plughw:0,0' aplay: set_params:895: Access type not available