mmc: sdio: add MediaTek MT7902 SDIO device ID
Subsystems (3)
PATCH 1/4 mmc: sdio: add MediaTek MT7902 SDIO device ID
From: Sean Wang <[email protected]>
Add SDIO device ID (0x790a) for MediaTek MT7902 to sdio_ids.h.
--- include/linux/mmc/sdio_ids.h | 1 + 1 file changed, 1 insertion(+)
include/linux/mmc/sdio_ids.h +1 -0
@@ -112,6 +112,7 @@#define SDIO_DEVICE_ID_MEDIATEK_MT7663 0x7663#define SDIO_DEVICE_ID_MEDIATEK_MT7668 0x7668#define SDIO_DEVICE_ID_MEDIATEK_MT7961 0x7961 +#define SDIO_DEVICE_ID_MEDIATEK_MT7902 0x790a#define SDIO_VENDOR_ID_MICROCHIP_WILC 0x0296#define SDIO_DEVICE_ID_MICROCHIP_WILC1000 0x5347
Signature · 1 line
2.43.0
PATCH 2/4 Bluetooth: btmtk: add MT7902 MCU support
From: Sean Wang <[email protected]>
Add MT7902 device ID and firmware filename to enable MCU firmware loading.
--- drivers/bluetooth/btmtk.c | 1 + drivers/bluetooth/btmtk.h | 1 + 2 files changed, 2 insertions(+)
drivers/bluetooth/btmtk.c +1 -0
@@ -1338,6 +1338,7 @@ int btmtk_usb_setup(struct hci_dev *hdev)case 0x7922 :case 0x7925 :case 0x7961 : +case 0x7902 :btmtk_fw_get_filename (fw_bin_name,sizeof (fw_bin_name), dev_id, fw_version, fw_flavor);
drivers/bluetooth/btmtk.h +1 -0
@@ -5,6 +5,7 @@#define FIRMWARE_MT7663 "mediatek/mt7663pr2h.bin"#define FIRMWARE_MT7668 "mediatek/mt7668pr2h.bin"#define FIRMWARE_MT7922 "mediatek/BT_RAM_CODE_MT7922_1_1_hdr.bin" +#define FIRMWARE_MT7902 "mediatek/BT_RAM_CODE_MT7902_1_1_hdr.bin"#define FIRMWARE_MT7961 "mediatek/BT_RAM_CODE_MT7961_1_2_hdr.bin"#define FIRMWARE_MT7925 "mediatek/mt7925/BT_RAM_CODE_MT7925_1_1_hdr.bin"
Signature · 1 line
2.43.0
PATCH 3/4 Bluetooth: btusb: Add new VID/PID 13d3/3579 for MT7902
In reply to Sean WangFrom: Sean Wang <[email protected]>
Add VID 13d3 & PID 3633 for MediaTek MT7922 USB Bluetooth chip.
The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below.
T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=04 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3579 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
--- drivers/bluetooth/btusb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/bluetooth/btusb.c +2 -1
@@ -671,7 +671,8 @@ static const struct usb_device_id quirks_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3606), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, - + { USB_DEVICE(0x13d3, 0x3579), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH }, /* MediaTek MT7922 Bluetooth devices */ { USB_DEVICE(0x13d3, 0x3585), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH },
Signature · 1 line
2.43.0
Re: [PATCH 3/4] Bluetooth: btusb: Add new VID/PID 13d3/3579 for MT7902
Hi Sean,
Thanks for helping me to add driver for mt7902 chip.
I have checked the wifi driver for mt7902 and it is working correctly with new firmware, earlier I have issue with old firmware, thanks.
For Bluetooth driver, you already added VID/PID 13d3/3579 for MT7902 There are some other VID/PID which are part of mt7902 bluetooth chip
13d3/3580 - (my chip) 13d3/3594 - https://github.com/OnlineLearningTutorials/mt7902_temp/commit/f94e0075ca04e50629852adbb567e130f8784873 13d3/3596 - https://github.com/OnlineLearningTutorials/mt7902_temp/commit/2a3db89c7a87241846d166defa17ebd22d4be337
Please add these VID/PID or instruct me to add, below are device debug - cat /sys/kernel/debug/usb/devices
cat /sys/kernel/debug/usb/devices
T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3580 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
cat /sys/kernel/debug/usb/devices
T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3594 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
cat /sys/kernel/debug/usb/devices
T: Bus=07 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3596 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
Thanks
Re: [PATCH 3/4] Bluetooth: btusb: Add new VID/PID 13d3/3579 for MT7902
Quoted 8 lines · OnlineLearningTutorials
Hi Sean,
Thanks for helping me to add driver for mt7902 chip.
I have checked the wifi driver for mt7902 and it is working correctly with new firmware, earlier I have issue with old firmware, thanks.
Quoted 7 lines
For Bluetooth driver, you already added VID/PID 13d3/3579 for MT7902 There are some other VID/PID which are part of mt7902 bluetooth chip
13d3/3580 - (my chip) 13d3/3594 - https://github.com/OnlineLearningTutorials/mt7902_temp/commit/f94e0075ca04e50629852adbb567e130f8784873 13d3/3596 - https://github.com/OnlineLearningTutorials/mt7902_temp/commit/2a3db89c7a87241846d166defa17ebd22d4be337Please add these VID/PID or instruct me to add,
Hi Kush,
Glad to hear Wi-Fi works with the new firmware.
I’ll add the additional Bluetooth VID/PIDs in the next version to make the MT7902 chipset more accessible.
Appreciate the report and logs.
Quoted 135 lines
below are device debug - cat
/sys/kernel/debug/usb/devicescat
/sys/kernel/debug/usb/devicesT: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3580 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125uscat
/sys/kernel/debug/usb/devicesT: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3594 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125uscat
/sys/kernel/debug/usb/devicesT: Bus=07 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3596 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125usThanks
Re: [PATCH 3/4] Bluetooth: btusb: Add new VID/PID 13d3/3579 for MT7902
In reply to Sean WangQuoted 4 lines · Sean Wang
From: Sean Wang <[email protected]>
Add VID 13d3 & PID 3633 for MediaTek MT7922 USB Bluetooth chip.
Hi, there is a copy paste error.
Quoted 53 lines
The information in
/sys/kernel/debug/usb/devicesabout the Bluetooth device is listed as the below.T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=04 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3579 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125usSigned-off-by Sean Wang <[email protected]>--- drivers/bluetooth/btusb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)drivers/bluetooth/btusb.c +0
-0
drivers/bluetooth/btusb.c static const struct usb_device_id quirks_table[] = { · line 678
Quoted 9 lines
drivers/bluetooth/btusb.c +2
-1@@ -671,7 +671,8 @@ static const struct usb_device_id quirks_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3606), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, - + { USB_DEVICE(0x13d3, 0x3579), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH }, /* MediaTek MT7922 Bluetooth devices */ { USB_DEVICE(0x13d3, 0x3585), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH },
My MT7902 card bought from Aliexpress has a different USB ID: 0e8d 1ede.
T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0e8d ProdID=1ede Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125usPATCH 4/4 Bluetooth: btmtk: add MT7902 SDIO support
In reply to Sean WangFrom: Sean Wang <[email protected]>
Add MT7902 Bluetooth SDIO support by introducing chip data and registering the device ID.
Runtime PM is not yet supported by the driver, but normal operation is unaffected.
--- drivers/bluetooth/btmtksdio.c | 42 ++++++++++++++++++++++++----------- 1 file changed, 29 insertions(+), 13 deletions(-)
drivers/bluetooth/btmtksdio.c +29 -13
@@ -42,24 +42,35 @@ struct btmtksdio_data {const char *fwname;u16 chipid;bool lp_mbox_supported; +bool pm_runtime_supported; };static const struct btmtksdio_data mt7663_data = { .fwname =FIRMWARE_MT7663 , .chipid =0x7663 , .lp_mbox_supported = false, + .pm_runtime_supported = true, };static const struct btmtksdio_data mt7668_data = { .fwname =FIRMWARE_MT7668 , .chipid =0x7668 , .lp_mbox_supported = false, + .pm_runtime_supported = true, };static const struct btmtksdio_data mt7921_data = { .fwname =FIRMWARE_MT7961 , .chipid =0x7921 , .lp_mbox_supported = true, + .pm_runtime_supported = true, +}; + +static const struct btmtksdio_data mt7902_data = { + .fwname =FIRMWARE_MT7902 , + .chipid =0x7902 , + .lp_mbox_supported = false, + .pm_runtime_supported = false, };static const struct sdio_device_id btmtksdio_table[] = {
@@ -69,6 +80,8 @@ static const struct sdio_device_id btmtksdio_table[] = { .driver_data = (kernel_ulong_t)&mt7668_data }, {SDIO_DEVICE(SDIO_VENDOR_ID_MEDIATEK, SDIO_DEVICE_ID_MEDIATEK_MT7961), .driver_data = (kernel_ulong_t)&mt7921_data }, + {SDIO_DEVICE(SDIO_VENDOR_ID_MEDIATEK, SDIO_DEVICE_ID_MEDIATEK_MT7902), + .driver_data = (kernel_ulong_t)&mt7902_data }, { }/* Terminating entry */ };MODULE_DEVICE_TABLE (sdio, btmtksdio_table);
@@ -1090,6 +1103,7 @@ static int btmtksdio_setup(struct hci_dev *hdev)set_bit (BTMTKSDIO_HW_TX_READY , &bdev->tx_state);switch (bdev->data->chipid) { +case 0x7902 :case 0x7921 :if (test_bit (BTMTKSDIO_HW_RESET_ACTIVE , &bdev->tx_state)) { err = btmtksdio_mtk_reg_read(hdev, MT7921_DLSTATUS,
@@ -1167,22 +1181,24 @@ static int btmtksdio_setup(struct hci_dev *hdev) delta =ktime_sub (rettime, calltime); duration = (unsigned long long )ktime_to_ns (delta) >>10 ; -pm_runtime_set_autosuspend_delay (bdev->dev, -MTKBTSDIO_AUTOSUSPEND_DELAY ); -pm_runtime_use_autosuspend (bdev->dev); +if (bdev->data->pm_runtime_supported) { +pm_runtime_set_autosuspend_delay (bdev->dev, +MTKBTSDIO_AUTOSUSPEND_DELAY ); +pm_runtime_use_autosuspend (bdev->dev); - err =pm_runtime_set_active (bdev->dev); -if (err <0 ) -return err; + err =pm_runtime_set_active (bdev->dev); +if (err <0 ) +return err; -/* Default forbid runtime auto suspend, that can be allowed by -* enable_autosuspend flag or the PM runtime entry under sysfs. -*/ -pm_runtime_forbid (bdev->dev); -pm_runtime_enable (bdev->dev); +/* Default forbid runtime auto suspend, that can be allowed by +* enable_autosuspend flag or the PM runtime entry under sysfs. +*/ +pm_runtime_forbid (bdev->dev); +pm_runtime_enable (bdev->dev); -if (enable_autosuspend) -pm_runtime_allow (bdev->dev); +if (enable_autosuspend) +pm_runtime_allow (bdev->dev); + }bt_dev_info (hdev,"Device setup in %llu usecs" , duration);
Signature · 1 line
2.43.0
Dear Sean,
Thank you for the patch.
Am 20.02.26 um 00:16 schrieb Sean Wang:
Quoted 3 lines
From: Sean Wang <[email protected]>
Add SDIO device ID (
0x790a) for MediaTek MT7902 tosdio_ids.h.
Tested how?
Quoted 10 lines
Signed-off-by Sean Wang <[email protected]>--- include/linux/mmc/sdio_ids.h | 1 + 1 file changed, 1 insertion(+)include/linux/mmc/sdio_ids.h +0
-0
include/linux/mmc/sdio_ids.h line 115
Quoted 4 lines
include/linux/mmc/sdio_ids.h +1
-0@@ -112,6 +112,7 @@#define SDIO_DEVICE_ID_MEDIATEK_MT7663 0x7663#define SDIO_DEVICE_ID_MEDIATEK_MT7668 0x7668#define SDIO_DEVICE_ID_MEDIATEK_MT7961 0x7961 +#define SDIO_DEVICE_ID_MEDIATEK_MT7902 0x790a
Please sort it.
include/linux/mmc/sdio_ids.h line 118
Quoted 3 lines
include/linux/mmc/sdio_ids.h +0
-0#define SDIO_VENDOR_ID_MICROCHIP_WILC 0x0296#define SDIO_DEVICE_ID_MICROCHIP_WILC1000 0x5347
Kind regards,
Paul
Dear Paul,
Quoted 4 lines · Paul Menzel
Dear Sean,
Quoted 8 lines
Thank you for the patch.
Am 20.02.26 um 00:16 schrieb Sean Wang:
Quoted 3 lines
From: Sean Wang <[email protected]>
Add SDIO device ID (
0x790a) for MediaTek MT7902 tosdio_ids.h.Tested how?
Tested on real hardware with successful card detection, driver initialization and the connectivity.
Quoted 6 lines
Quoted 6 lines
Signed-off-by Sean Wang <[email protected]>--- include/linux/mmc/sdio_ids.h | 1 + 1 file changed, 1 insertion(+)
Quoted 11 lines
include/linux/mmc/sdio_ids.h line 115
Quoted 9 lines
include/linux/mmc/sdio_ids.h +1
-0@@ -112,6 +112,7 @@#define SDIO_DEVICE_ID_MEDIATEK_MT7663 0x7663#define SDIO_DEVICE_ID_MEDIATEK_MT7668 0x7668#define SDIO_DEVICE_ID_MEDIATEK_MT7961 0x7961 +#define SDIO_DEVICE_ID_MEDIATEK_MT7902 0x790aPlease sort it.
I will address the sorting in v2.
Thanks for the review.
Quoted 9 lines
include/linux/mmc/sdio_ids.h line 118
Quoted 4 lines
include/linux/mmc/sdio_ids.h +0
-0#define SDIO_VENDOR_ID_MICROCHIP_WILC 0x0296#define SDIO_DEVICE_ID_MICROCHIP_WILC1000 0x5347Kind regards,
Paul
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1055716
---Test result---
Test Summary:
CheckPatch PENDING 0.46 seconds GitLint PENDING 0.42 seconds SubjectPrefix FAIL 0.62 seconds BuildKernel PASS 25.91 seconds CheckAllWarning PASS 28.56 seconds CheckSparse WARNING 32.02 seconds BuildKernel32 PASS 25.30 seconds TestRunnerSetup PASS 565.25 seconds TestRunner_l2cap-tester PASS 28.88 seconds TestRunner_iso-tester FAIL 67.63 seconds TestRunner_bnep-tester PASS 6.52 seconds TestRunner_mgmt-tester FAIL 115.89 seconds TestRunner_rfcomm-tester PASS 9.56 seconds TestRunner_sco-tester FAIL 14.62 seconds TestRunner_ioctl-tester PASS 10.54 seconds TestRunner_mesh-tester FAIL 12.55 seconds TestRunner_smp-tester PASS 8.84 seconds TestRunner_userchan-tester PASS 6.77 seconds IncrementalBuild PENDING 0.68 seconds
Details
##############################
Test: CheckPatch - PENDING
Desc: Run checkpatch.pl script
Output:
##############################
Test: GitLint - PENDING
Desc: Run gitlint
Output:
##############################
Test: SubjectPrefix - FAIL
Desc: Check subject contains "Bluetooth" prefix
Output:
"Bluetooth: " prefix is not specified in the subject
##############################
Test: CheckSparse - WARNING
Desc: Run sparse tool with linux kernel
Output:drivers/bluetooth/btmtk.c:1508:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1509:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1510:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1511:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1512:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1512:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1513:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1514:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1515:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1516:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1517:1: error: bad constant expressiondrivers/bluetooth/btmtk.c:1518:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4660:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4661:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4663:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4664:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4666:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4667:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4669:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4670:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4672:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4673:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4674:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4675:1: error: bad constant expressiondrivers/bluetooth/btusb.c:4675:1: error: bad constant expressiondrivers/bluetooth/btmtksdio.c:1572:1: error: bad constant expressiondrivers/bluetooth/btmtksdio.c:1573:1: error: bad constant expressiondrivers/bluetooth/btmtksdio.c:1575:1: error: bad constant expressiondrivers/bluetooth/btmtksdio.c:1576:1: error: bad constant expressiondrivers/bluetooth/btmtksdio.c:1577:1: error: bad constant expressiondrivers/bluetooth/btmtksdio.c:1578:1: error: bad constant expressiondrivers/bluetooth/btmtksdio.c:1578:1: error: bad constant expression
##############################
Test: TestRunner_iso-tester - FAIL
Desc: Run iso-tester with test-runner
Output:
BUG: KASAN: slab-use-after-free in le_read_features_complete+0x7e/0x2b0
Total: 141, Passed: 141 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner
Output:
Total: 494, Passed: 489 (99.0%), Failed: 1, Not Run: 4
Failed Test Cases
Read Exp Feature - Success Failed 0.110 seconds
##############################
Test: TestRunner_sco-tester - FAIL
Desc: Run sco-tester with test-runner
Output:
WARNING: possible circular locking dependency detected
BUG: sleeping function called from invalid context at net/core/sock.c:3782
Total: 30, Passed: 30 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner_mesh-tester - FAIL
Desc: Run mesh-tester with test-runner Output:
Total: 10, Passed: 8 (80.0%), Failed: 2, Not Run: 0
Failed Test Cases
Mesh - Send cancel - 1 Timed out 2.687 seconds Mesh - Send cancel - 2 Timed out 1.994 seconds
##############################
Test: IncrementalBuild - PENDING
Desc: Incremental build with the patches in the series Output:
---
Regards,
Linux Bluetooth
Quoted 6 lines · Sean Wang
From: Sean Wang <[email protected]>
Add SDIO device ID (
0x790a) for MediaTek MT7902 tosdio_ids.h.Signed-off-by Sean Wang <[email protected]>
This should go along with the other patches, so I am not picking this via my mmc tree.
With the sorting (pointed out by other reviewers) fixed, please add:
Kind regards
Uffe
Quoted 19 lines
--- include/linux/mmc/sdio_ids.h | 1 + 1 file changed, 1 insertion(+)include/linux/mmc/sdio_ids.h +1
-1@@ -112,6 +112,7 @@#define SDIO_DEVICE_ID_MEDIATEK_MT7663 0x7663#define SDIO_DEVICE_ID_MEDIATEK_MT7668 0x7668#define SDIO_DEVICE_ID_MEDIATEK_MT7961 0x7961 +#define SDIO_DEVICE_ID_MEDIATEK_MT7902 0x790a#define SDIO_VENDOR_ID_MICROCHIP_WILC 0x0296#define SDIO_DEVICE_ID_MICROCHIP_WILC1000 0x5347 --2.43.0