qe-uart: add support for Freescale QUICCEngine UART
PATCH v2 1/1 qe-uart: add support for Freescale QUICCEngine UART
Add file ucc_uart.c, a serial device driver for the Freescale QUICCEngine. Update the Kconfig and Makefile accordingly.
Signed-off-by Timur Tabi <[email protected]>
---
Updated to reflect comments from Kumar.
drivers/serial/Kconfig | 10 + drivers/serial/Makefile | 1 + drivers/serial/ucc_uart.c | 1514 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1525 insertions(+), 0 deletions(-) create mode 100644 drivers/serial/ucc_uart.c
drivers/serial/Kconfig +10 -0
@@ -1284,4 +1284,14 @@ config SERIAL_OF_PLATFORM Currently, only 8250 compatible ports are supported, but others can easily be added. +config SERIAL_QE + tristate "Freescale QUICC Engine serial port support" + depends on QUICC_ENGINE + select SERIAL_CORE + select FW_LOADER + default n + help + This driver supports the QE serial ports on Freescale embedded + PowerPC that contain a QUICC Engine. + endmenu
drivers/serial/Makefile +1 -0
@@ -64,3 +64,4 @@ obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o obj-$(CONFIG_SERIAL_NETX) += netx-serial.o obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o +obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
drivers/serial/ucc_uart.c new file +1514 -0
1,514 lines not on this page · raw message
Signature · 1 line
1.5.2.4
Kumar Gala
AppliedQuoted 6 lines · Timur Tabi
Add file
ucc_uart.c, a serial device driver for the Freescale QUICCEngine. Update theKconfigandMakefileaccordingly.Signed-off-by Timur Tabi <[email protected]>---
Quoted 8 lines
Updated to reflect comments from Kumar.
drivers/serial/Kconfig | 10 + drivers/serial/Makefile | 1 + drivers/serial/ucc_uart.c | 1514 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1525 insertions(+), 0 deletions(-) create mode 100644 drivers/serial/ucc_uart.c
applied.
- k