Remove #undef DEBUGx and #define DEBUG from all board header files

PATCH New Timur Tabi 1 participant 1 message Jan 16, 2008

Share & tools

Timur Tabi

author

2008-01-16 18:42 UTC #0 lore raw

PATCH v2 1/1 Remove #undef DEBUGx and #define DEBUG from all board header files

Remove the "#undef DEBUG" and other DEBUG_xxx lines from all board header files. Also remove the "#define DEBUG" and other DEBUG_xxx lines from all board header files. The inclusion of these line makes it impossible to control debug on a per-file basis.

Signed-off-by Timur Tabi <[email protected]>

---

Removed all the "#define DEBUG" statements as well.

 include/configs/AP1000.h       |    2 --
 include/configs/BAB7xx.h       |    1 -
 include/configs/EB+MCF-EV123.h |    1 -
 include/configs/ELPPC.h        |    1 -
 include/configs/IP860.h        |    1 -
 include/configs/IPHASE4539.h   |    2 --
 include/configs/M5235EVB.h     |    2 --
 include/configs/M5271EVB.h     |    2 --
 include/configs/M5329EVB.h     |    2 --
 include/configs/M54455EVB.h    |    2 --
 include/configs/MPC8323ERDB.h  |    2 --
 include/configs/MPC832XEMDS.h  |    2 --
 include/configs/MPC8349EMDS.h  |    2 --
 include/configs/MPC8360EMDS.h  |    2 --
 include/configs/MPC8360ERDK.h  |    2 --
 include/configs/MPC837XEMDS.h  |    2 --
 include/configs/MPC8540EVAL.h  |    2 --
 include/configs/MVBLUE.h       |    2 --
 include/configs/QS823.h        |    4 ----
 include/configs/QS850.h        |    4 ----
 include/configs/QS860T.h       |    4 ----
 include/configs/Rattler.h      |    2 --
 include/configs/ads5121.h      |    3 ---
 include/configs/assabet.h      |    2 --
 include/configs/csb226.h       |    2 --
 include/configs/ep8248.h       |    2 --
 include/configs/ep82xxm.h      |    2 --
 include/configs/gcplus.h       |    2 --
 include/configs/gw8260.h       |    4 ----
 include/configs/integratorap.h |    1 -
 include/configs/mgcoge.h       |    2 --
 include/configs/mpc7448hpc2.h  |    2 --
 include/configs/ms7722se.h     |    1 -
 include/configs/ms7750se.h     |    1 -
 include/configs/ppmc7xx.h      |    1 -
 include/configs/pxa255_idp.h   |    7 -------
 include/configs/sacsng.h       |    4 ----
 include/configs/sbc8260.h      |    4 ----
 include/configs/sbc8349.h      |    2 --
 include/configs/utx8245.h      |    1 -
 40 files changed, 0 insertions(+), 89 deletions(-)

include/configs/AP1000.h +0 -2

index d490b33..baa9741 100644
@@ -22,8 +22,6 @@
  * (easy to change)
  */
 
-#undef DEBUG
-
 #define CONFIG_405	1		/* This is a PPC405 CPU	    */
 #define CONFIG_4xx	1		/* ...member of PPC4xx family	*/

include/configs/BAB7xx.h +0 -1

index c11e9c9..8ec70aa 100644
@@ -28,7 +28,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#undef  DEBUG
 #define GTREGREAD(x) 0xffffffff         /* needed for debug */
 
 /*

include/configs/EB+MCF-EV123.h +0 -1

index dae5295..6e0269b 100644
@@ -27,7 +27,6 @@
 
 #define  CONFIG_EB_MCF_EV123
 
-#undef DEBUG
 #undef CFG_HALT_BEFOR_RAM_JUMP
 #undef ET_DEBUG

include/configs/ELPPC.h +0 -1

index bb77188..c64537f 100644
@@ -28,7 +28,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#undef  DEBUG
 #define GTREGREAD(x) 0xffffffff         /* needed for debug */
 
 /*

include/configs/IP860.h +0 -1

index bd961d8..d2c2ee5 100644
@@ -189,7 +189,6 @@
 #undef	CFG_ENV_IS_IN_FLASH
 #undef	CFG_ENV_IS_IN_NVRAM
 #undef  CFG_ENV_IS_IN_NVRAM
-#undef	DEBUG_I2C
 #define	CFG_ENV_IS_IN_EEPROM
 
 #ifdef	CFG_ENV_IS_IN_NVRAM

include/configs/IPHASE4539.h +0 -2

index 6fee455..bb2c96a 100644
@@ -30,8 +30,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#undef DEBUG				/* General debug */
-
 /*-----------------------------------------------------------------------
  * High Level Configuration Options
  * (easy to change)

include/configs/M5235EVB.h +0 -2

index 7f544c8..3b4bff3 100644
@@ -37,8 +37,6 @@
 #define CONFIG_MCF523x		/* define processor family */
 #define CONFIG_M5235		/* define processor type */
 
-#undef DEBUG
-
 #define CONFIG_MCFUART
 #define CFG_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200

include/configs/M5271EVB.h +0 -2

index 798ec0c..47e1e03 100644
@@ -31,8 +31,6 @@
 #ifndef _M5271EVB_H
 #define _M5271EVB_H
 
-#undef DEBUG
-
 /*
  * High Level Configuration Options (easy to change)
  */

include/configs/M5329EVB.h +0 -2

index 47d74a3..914ef38 100644
@@ -37,8 +37,6 @@
 #define CONFIG_MCF532x		/* define processor family */
 #define CONFIG_M5329		/* define processor type */
 
-#undef DEBUG
-
 #define CONFIG_MCFUART
 #define CFG_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200

include/configs/M54455EVB.h +0 -2

index 211f11d..6697fb5 100644
@@ -38,8 +38,6 @@
 #define CONFIG_M54455		/* define processor type */
 #define CONFIG_M54455EVB	/* M54455EVB board */
 
-#undef DEBUG
-
 #define CONFIG_MCFUART
 #define CFG_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200

include/configs/MPC8323ERDB.h +0 -2

index 4ea8709..0e33fce 100644
@@ -9,8 +9,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#undef DEBUG
-
 /*
  * High Level Configuration Options
  */

include/configs/MPC832XEMDS.h +0 -2

index 25ac58c..8cf0a5b 100644
@@ -20,8 +20,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#undef DEBUG
-
 /*
  * High Level Configuration Options
  */

include/configs/MPC8349EMDS.h +0 -2

index 437a9a5..2c6534c 100644
@@ -29,8 +29,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#undef DEBUG
-
 /*
  * High Level Configuration Options
  */

include/configs/MPC8360EMDS.h +0 -2

index fdacb90..310d03f 100644
@@ -22,8 +22,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#undef DEBUG
-
 /*
  * High Level Configuration Options
  */

include/configs/MPC8360ERDK.h +0 -2

index 0f6f8f1..72d36c1 100644
@@ -17,8 +17,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#undef DEBUG
-
 /*
  * High Level Configuration Options
  */

include/configs/MPC837XEMDS.h +0 -2

index 2b84e9c..61de084 100644
@@ -21,8 +21,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#undef DEBUG
-
 /*
  * High Level Configuration Options
  */

include/configs/MPC8540EVAL.h +0 -2

index 2868dcb..330615a 100644
@@ -238,8 +238,6 @@
 #define INTEL_LXT971_PHY	1
 #endif
 
-#undef DEBUG
-
 /* Environment */
 #ifndef CFG_RAMBOOT
 #if defined(CONFIG_RAM_AS_FLASH)

include/configs/MVBLUE.h +0 -2

index 0defafe..d799f54 100644
@@ -53,8 +53,6 @@
 #define ERR_LED(code)
 #endif
 
-#undef DEBUG
-
 #define CONFIG_MPC824X		1
 #define CONFIG_MPC8245		1
 #define CONFIG_MVBLUE		1

include/configs/QS823.h +0 -4

index 3657fea..fdf0e01 100644
@@ -38,10 +38,6 @@
 #undef CFG_DEVICE_NULLDEV		/* null device */
 #undef CONFIG_SILENT_CONSOLE		/* silent console */
 #undef CFG_CONSOLE_INFO_QUIET		/* silent console ? */
-#undef DEBUG				/* debug output code */
-#undef DEBUG_FLASH			/* debug flash code */
-#undef FLASH_DEBUG			/* debug fash code */
-#undef DEBUG_ENV			/* debug environment code */
 
 #define CFG_DIRECT_FLASH_TFTP	1	/* allow direct tftp to flash */
 #define CONFIG_ENV_OVERWRITE	1	/* allow overwrite MAC address */

include/configs/QS850.h +0 -4

index 3db539f..4e7eea1 100644
@@ -38,10 +38,6 @@
 #undef CFG_DEVICE_NULLDEV		/* null device */
 #undef CONFIG_SILENT_CONSOLE		/* silent console */
 #undef CFG_CONSOLE_INFO_QUIET		/* silent console ? */
-#undef DEBUG				/* debug output code */
-#undef DEBUG_FLASH			/* debug flash code */
-#undef FLASH_DEBUG			/* debug fash code */
-#undef DEBUG_ENV			/* debug environment code */
 
 #define CFG_DIRECT_FLASH_TFTP	1	/* allow direct tftp to flash */
 #define CONFIG_ENV_OVERWRITE	1	/* allow overwrite MAC address */

include/configs/QS860T.h +0 -4

index b3442de..ff2e39e 100644
@@ -38,10 +38,6 @@
 #undef CFG_DEVICE_NULLDEV		/* null device */
 #undef CONFIG_SILENT_CONSOLE		/* silent console */
 #undef CFG_CONSOLE_INFO_QUIET		/* silent console ? */
-#undef DEBUG				/* debug output code */
-#undef DEBUG_FLASH			/* debug flash code */
-#undef FLASH_DEBUG			/* debug fash code */
-#undef DEBUG_ENV			/* debug environment code */
 
 #define CFG_DIRECT_FLASH_TFTP	1	/* allow direct tftp to flash */
 #define CONFIG_ENV_OVERWRITE	1	/* allow overwrite MAC address */

include/configs/Rattler.h +0 -2

index d7652fa..428c0c2 100644
@@ -37,8 +37,6 @@
 
 #define CONFIG_RATTLER			/* Analogue&Micro Rattler board */
 
-#undef DEBUG
-
 /* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */
 #define CONFIG_ENV_OVERWRITE

include/configs/ads5121.h +0 -3

index a4de552..b5c69f0 100644
@@ -27,9 +27,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define DEBUG
-#undef DEBUG
-
 /*
  * Memory map for the ADS5121 board:
  *

include/configs/assabet.h +0 -2

index 226ad54..d10f092 100644
@@ -29,8 +29,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#undef DEBUG
-
 /*
  * High Level Configuration Options
  * (easy to change)

include/configs/csb226.h +0 -2

index 0be0f21..41ad4dc 100644
@@ -31,8 +31,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define DEBUG 1
-
 /*
  * High Level Configuration Options
  * (easy to change)

include/configs/ep8248.h +0 -2

index 85ad70a..cebe849 100644
@@ -31,8 +31,6 @@
 
 #define CONFIG_EP8248			/* Embedded Planet EP8248 board */
 
-#undef DEBUG
-
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f	*/
 
 /* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */

include/configs/ep82xxm.h +0 -2

index 4febd32..8e5d6e5 100644
@@ -31,8 +31,6 @@
 #define CONFIG_EP82XXM	/* Embedded Planet EP82xxM H 1.0 board */
 			/* 256MB SDRAM / 64MB FLASH */
 
-#undef DEBUG
-
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f */
 
 /* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */

include/configs/gcplus.h +0 -2

index e11ce4c..3b1b4ab 100644
@@ -29,8 +29,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#undef	 DEBUG
-
 /*
  * The ADS GCPlus Linux boot ROM loads U-Boot into RAM at 0xc0200000.
  * We don't actually init RAM in this case since we're using U-Boot as

include/configs/gw8260.h +0 -4

index ff57240..401b5cf 100644
@@ -50,10 +50,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/* Enable debug prints */
-#undef DEBUG                  /* General debug */
-#undef DEBUG_BOOTP_EXT        /* Debug received vendor fields */
-
 /* What is the oscillator's (UX2) frequency in Hz? */
 #define CONFIG_8260_CLKIN  (66 * 1000 * 1000)

include/configs/integratorap.h +0 -1

index 1452bf2..083eb2f 100644
@@ -146,7 +146,6 @@
 /*#define CONFIG_PCI			/--* include pci support	*/
 #undef CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW	1	/* show pci devices on startup	*/
-#define DEBUG
 
 #define CONFIG_EEPRO100
 #define CFG_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100	*/

include/configs/mgcoge.h +0 -2

index 3de2466..f4a1cc0 100644
@@ -35,8 +35,6 @@
 
 #define CONFIG_CPM2		1	/* Has a CPM2 */
 
-#undef DEBUG
-
 /*
  * Select serial console configuration
  *

include/configs/mpc7448hpc2.h +0 -2

index bd3107a..c7216c9 100644
@@ -33,8 +33,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#undef DEBUG
-
 /* Board Configuration Definitions */
 /* MPC7448HPC2 (High-Performance Computing II) (Taiga) board */

include/configs/ms7722se.h +0 -1

index ae0d018..8538037 100644
@@ -25,7 +25,6 @@
 #ifndef __MS7722SE_H
 #define __MS7722SE_H
 
-#undef DEBUG
 #define CONFIG_SH		1
 #define CONFIG_SH4		1
 #define CONFIG_CPU_SH7722	1

include/configs/ms7750se.h +0 -1

index 3668156..a25364d 100644
@@ -25,7 +25,6 @@
 #ifndef __MS7750SE_H
 #define __MS7750SE_H
 
-#undef DEBUG
 #define CONFIG_SH		1
 #define CONFIG_SH4		1
 #define CONFIG_CPU_SH7750	1

include/configs/ppmc7xx.h +0 -1

index fe7de7b..1d2d38b 100644
@@ -30,7 +30,6 @@
  * do_bdinfo		- Required to build with debug
  */
 
-#undef	DEBUG
 #ifdef	DEBUG
 #define	GTREGREAD(x)	0xFFFFFFFF
 #define	do_bdinfo(a,b,c,d)

include/configs/pxa255_idp.h +0 -7

index 4a9cadb..56a9b35 100644
@@ -45,13 +45,6 @@
 #undef CONFIG_SKIP_RELOCATE_UBOOT			/* define for developing */
 
 /*
- * define the following to enable debug blinks.  A debug blink function
- * must be defined in memsetup.S
- */
-#undef DEBUG_BLINK_ENABLE
-#undef DEBUG_BLINKC_ENABLE
-
-/*
  * High Level Configuration Options
  * (easy to change)
  */

include/configs/sacsng.h +0 -4

index c474acd..4a64b2e 100644
@@ -35,9 +35,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#undef DEBUG		      /* General debug */
-#undef DEBUG_BOOTP_EXT	      /* Debug received vendor fields */
-
 #undef CONFIG_LOGBUFFER       /* External logbuffer support */
 
 /*****************************************************************************

@@ -257,7 +254,6 @@
  */
 #define CONFIG_SOFT_SPI		/* Enable SPI driver */
 #define MAX_SPI_BYTES   4	/* Maximum number of bytes we can handle */
-#undef  DEBUG_SPI               /* Disable SPI debugging */
 
 /*
  * Software (bit-bang) SPI driver configuration

include/configs/sbc8260.h +0 -4

index b1d41a6..9739b3a 100644
@@ -35,10 +35,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/* Enable debug prints */
-#undef DEBUG		      /* General debug */
-#undef DEBUG_BOOTP_EXT	      /* Debug received vendor fields */
-
 /*****************************************************************************
  *
  * These settings must match the way _your_ board is set up

include/configs/sbc8349.h +0 -2

index 4cc4ff1..2498b3e 100644
@@ -31,8 +31,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#undef DEBUG
-
 /*
  * High Level Configuration Options
  */

include/configs/utx8245.h +0 -1

index cd00c49..7fb41fe 100644
@@ -49,7 +49,6 @@
 #define CONFIG_MPC824X		1
 #define CONFIG_MPC8245		1
 #define CONFIG_UTX8245		1
-#define DEBUG				1
 
 #define CONFIG_IDENT_STRING     " [UTX5] "

Signature · 1 line

1.5.2.4