Skip to contentSkip to conversation

DST: Distributed storage: Succumbed to live ant.

PATCH New Evgeniy Polyakov 1 participant 5 messages Jan 22, 2008 1 message not in the archive

Subsystems (5)
lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

cover DST: Distributed storage: Succumbed to live ant.

Distributed storage: Succumbed to live ant.

I'm pleased to announce the 14'th release of the distributed storage subsystem (DST).

DST allows to form a storage on top of local and remote nodes and combine them into linear or mirroring setup, which in turn can be exported to remote nodes.

This is a maintenance release only.

Short changelog:
* do not allocate big enough address structure on stack during local export node initialization
Thanks to Serge Leschinsky and Konstantin Kalin for testing.

Overall list of features of the DST can be found on project's homepage:

http://tservice.net.ru/~s0mbre/old/?section=projects&item=dst

DST is also exported as a git tree available for clone and pull from
http://tservice.net.ru/~s0mbre/archive/dst/dst.git

Thank you.

#2 lore raw

PATCH 1/4 DST: Distributed storage documentation.

Distributed storage documentation.

Algorithms used in the system, userspace interfaces (sysfs dirs and files), design and implementation details are described here.

Documentation/dst/algorithms.txt new file +115 -0
new file mode 100644
index 0000000..1437a6a
@@ -0,0 +1,115 @@
+Each storage by itself is just a set of contiguous logical blocks, with
+allowed number of operations. Nodes, each of which has own start and size,
+are placed into storage by appropriate algorithm, which remaps
+logical sector number into real node's sector. One can create
+own algorithms, since DST has pluggable interface for that.
+Currently mirrored and linear algorithms are supported.
+
+Let's briefly describe how they work.
+
+Linear algorithm.
+Simple approach of concatenating storages into single device with
+increased size is used in this algorithm. Essentially new device
+has size equal to sum of sizes of underlying nodes and nodes are
+placed one after another.
+
+  /----- Node 1 ---\                         /------ Node 3 ----\
+start              end                     start               end
+ |==================|========================|==================|
+ |                start                     end                 |
+ |                  \------- Node 2 ---------/                  |
+ |                                                              |
+start                                                          end
+ \-------------------------- DST storage ----------------------/
+
+			        /\
+			        ||
+			        ||
+
+			   IO operations
+
+			    Figure 1. 
+     3 nodes combined into single storage using linear algorithm.
+
+Mirror algorithm.
+In this algorithms nodes are placed under each other, so when
+operation comes to the first one, it can be mirrored to all
+underlying nodes. In case of reading, actual data is obtained from
+the nearest node - algoritm keeps track of previous operation
+and knows where it was stopped, so that subsequent seek to the 
+start of the new request will take the shortest time.
+Writing is always mirrored to all underlying nodes.
+
+                  IO operations
+                       ||
+                       ||
+                       \/
+
+|---------------- DST storage -------------------|
+|      prev position                             |
+|-------|------------ Node 1 --------------------|
+|                              prev pos          |
+|-------------------- Node 2 -----|--------------|
+|prev pos                                        |
+|---|---------------- Node 3 --------------------|
+
+		Figure 2.
+   3 nodes combined into single storage using mirror algorithm.
+
+Each algorithm must implement number of callbacks,
+which must be registered during initialization time.
+
+struct dst_alg_ops
+{
+	int			(*add_node)(struct dst_node *n);
+	void			(*del_node)(struct dst_node *n);
+	int 			(*remap)(struct dst_request *req);
+	int			(*error)(struct kst_state *state, int err);
+	struct module 		*owner;
+};
+
+@add_node.
+This callback is invoked when new node is being added into the storage,
+but before node is actually added into the storage, so that it could
+be accessed from it. When it is called, all appropriate initialization
+of the underlying device is already completed (system has been connected
+to remote node or got a reference to the local block device). At this
+stage algorithm can add node into private map. 
+It must return zero on success or negative value otherwise.
+
+@del_node.
+This callback is invoked when node is being deleted from the storage,
+i.e. when its reference counter hits zero. It is called before
+any cleaning is performed.
+It must return zero on success or negative value otherwise.
+
+@remap.
+This callback is invoked each time new bio hits the storage.
+Request structure contains BIO itself, pointer to the node, which originally
+stores the whole region under given IO request, and various parameters
+used by storage core to process this block request.
+It must return zero on success or negative value otherwise. It is upto
+this method to call all cleaning if remapping failed, for example it must
+call kst_bio_endio() for given callback in case of error, which in turn
+will call bio_endio(). Note, that dst_request structure provided in this
+callback is allocated on stack, so if there is a need to use it outside
+of the given function, it must be cloned (it will happen automatically
+in state's push callback, but that copy will not be shared by any other
+user).
+
+@error.
+This callback is invoked for each error, which happend when processed
+requests for remote nodes or when talking to remote size
+of the local export node (state contains data related to data
+transfers over the network).
+If this function has fixed given error, it must return 0 or negative
+error value otherwise.
+
+@owner.
+This is module reference counter updated automatically by DST core.
+
+Algorithm must provide its name and above structure to the 
+dst_alloc_alg() function, which will return a reference to the newly
+created algorithm.
+To remove it, one needs to call dst_remove_alg() with given algorithm
+pointer.
Documentation/dst/dst.txt new file +69 -0

69 lines not on this page · raw message

Documentation/dst/sysfs.txt new file +33 -0
new file mode 100644
index 0000000..782ada0
@@ -0,0 +1,33 @@
+This file describes sysfs files created for each storage.
+
+1. Per-storage files.
+Each storage has its own dir /sys/bus/dst/devices/$storage_name,
+which contains following files:
+
+alg - contains name of the algorithm used to created given storage
+name - name of the storage
+nodes - map of the storage (list of nodes and their sizes and starts)
+remove_all_nodes - writable file which allows to remove all nodes from given
+	storage
+n-$start-$cookie - per node directory, where
+	$start - start of the given node in sectors,
+	$cookie - unique node's id used by DST
+
+2. Per-node files.
+Node's files are located in /sys/bus/dst/devices/$storage_name/n-$start-$cookie
+directory, described above.
+
+clean - writable file, writing leads to marking node as clean (in sync)
+dirty - writable file, writing leads to marking node as dirty (not in sync)
+resync_size - size of the resync sliding window
+resync_timout - resync requests checking timeout (in milliseconds) of
+	the background worker thread
+state - sync/notsync state of the node in the mirror
+
+flags - flags of the given node
+size - size of the given node in sectors
+start - start of the given node in the storage in sectors
+type - contains type of the node in the following format: $type: $dev
+	where $type is either 'L' or 'R' - local or remote acordingly,
+	and $dev is device name for local node (/dev/sda1 for example)
+	or address of the remote node (192.168.4.81:1025 for example)
#3 lore raw

PATCH 2/4 DST: Core distributed storage files.

Core distributed storage files.
Include userspace interfaces, initialization, block layer bindings and other core functionality.

drivers/block/Kconfig +2 -0
index b4c8319..ca6592d 100644
@@ -451,6 +451,8 @@ config ATA_OVER_ETH
 	This driver provides Support for ATA over Ethernet block
 	devices like the Coraid EtherDrive (R) Storage Blade.
 
+source "drivers/block/dst/Kconfig"
+
 source "drivers/s390/block/Kconfig"
 
 endmenu
drivers/block/Makefile +1 -0
index dd88e33..fcf042d 100644
@@ -29,3 +29,4 @@ obj-$(CONFIG_VIODASD)		+= viodasd.o
 obj-$(CONFIG_BLK_DEV_SX8)	+= sx8.o
 obj-$(CONFIG_BLK_DEV_UB)	+= ub.o
 
+obj-$(CONFIG_DST)		+= dst/
drivers/block/dst/Kconfig new file +28 -0
new file mode 100644
index 0000000..67a7dad
@@ -0,0 +1,28 @@
+config DST
+	tristate "Distributed storage"
+	depends on NET
+	select CONNECTOR
+	select LIBCRC32C
+	---help---
+	This driver allows to create a distributed storage.
+
+config DST_DEBUG
+	bool "DST debug"
+	depends on DST
+	---help---
+	This option will turn HEAVY debugging of the DST.
+	Turn it on ONLY if you have to debug some really obscure problem.
+
+config DST_ALG_LINEAR
+	tristate "Linear distribution algorithm"
+	depends on DST
+	---help---
+	This module allows to create linear mapping of the nodes
+	in the distributed storage.
+
+config DST_ALG_MIRROR
+	tristate "Mirror distribution algorithm"
+	depends on DST
+	---help---
+	This module allows to create a mirror of the nodes in the
+	distributed storage.
drivers/block/dst/Makefile new file +6 -0
new file mode 100644
index 0000000..1400e94
@@ -0,0 +1,6 @@
+obj-$(CONFIG_DST) += dst.o
+
+dst-y := dcore.o kst.o
+
+obj-$(CONFIG_DST_ALG_LINEAR) += alg_linear.o
+obj-$(CONFIG_DST_ALG_MIRROR) += alg_mirror.o
drivers/block/dst/dcore.c new file +1657 -0

1,657 lines not on this page · raw message

include/linux/connector.h +3 -1
index 10eb56b..9e67d58 100644
@@ -36,9 +36,11 @@
 #define CN_VAL_CIFS                     0x1
 #define CN_W1_IDX			0x3	/* w1 communication */
 #define CN_W1_VAL			0x1
+#define CN_DST_IDX			0x4	/* Distributed storage */
+#define CN_DST_VAL			0x1
 
 
-#define CN_NETLINK_USERS		4
+#define CN_NETLINK_USERS		5
 
 /*
  * Maximum connector's message size.
include/linux/dst.h new file +407 -0

407 lines not on this page · raw message

#4 lore raw

PATCH 3/4 DST: Network state machine.

Network state machine.

Includes network async processing state machine and related tasks.

drivers/block/dst/kst.c new file +1523 -0
new file mode 100644
index 0000000..4ff14ce
@@ -0,0 +1,1523 @@
+/*
+ * 2007+ Copyright (c) Evgeniy Polyakov <[email protected]>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/socket.h>
+#include <linux/kthread.h>
+#include <linux/net.h>
+#include <linux/in.h>
+#include <linux/poll.h>
+#include <linux/bio.h>
+#include <linux/dst.h>
+
+#include <net/sock.h>
+
+struct kst_poll_helper
+{
+	poll_table 		pt;
+	struct kst_state	*st;
+};
+
+static LIST_HEAD(kst_worker_list);
+static DEFINE_MUTEX(kst_worker_mutex);
+
+/*
+ * This function creates bound socket for local export node.
+ */
+static int kst_sock_create(struct kst_state *st, struct saddr *addr,
+		int type, int proto, int backlog)
+{
+	int err;
+
+	err = sock_create(addr->sa_family, type, proto, &st->socket);
+	if (err)
+		goto err_out_exit;
+
+	err = st->socket->ops->bind(st->socket, (struct sockaddr *)addr,
+			addr->sa_data_len);
+
+	err = st->socket->ops->listen(st->socket, backlog);
+	if (err)
+		goto err_out_release;
+
+	st->socket->sk->sk_allocation = GFP_NOIO;
+
+	return 0;
+
+err_out_release:
+	sock_release(st->socket);
+err_out_exit:
+	return err;
+}
+
+static void kst_sock_release(struct kst_state *st)
+{
+	if (st->socket) {
+		sock_release(st->socket);
+		st->socket = NULL;
+	}
+}
+
+void kst_wake(struct kst_state *st)
+{
+	if (st) {
+		struct kst_worker *w = st->node->w;
+		unsigned long flags;
+
+		spin_lock_irqsave(&w->ready_lock, flags);
+		if (list_empty(&st->ready_entry))
+			list_add_tail(&st->ready_entry, &w->ready_list);
+		spin_unlock_irqrestore(&w->ready_lock, flags);
+
+		wake_up(&w->wait);
+	}
+}
+EXPORT_SYMBOL_GPL(kst_wake);
+
+/*
+ * Polling machinery.
+ */
+static int kst_state_wake_callback(wait_queue_t *wait, unsigned mode,
+		int sync, void *key)
+{
+	struct kst_state *st = container_of(wait, struct kst_state, wait);
+	kst_wake(st);
+	return 1;
+}
+
+static void kst_queue_func(struct file *file, wait_queue_head_t *whead,
+				 poll_table *pt)
+{
+	struct kst_state *st = container_of(pt, struct kst_poll_helper, pt)->st;
+
+	st->whead = whead;
+	init_waitqueue_func_entry(&st->wait, kst_state_wake_callback);
+	add_wait_queue(whead, &st->wait);
+}
+
+static void kst_poll_exit(struct kst_state *st)
+{
+	if (st->whead) {
+		remove_wait_queue(st->whead, &st->wait);
+		st->whead = NULL;
+	}
+}
+
+/*
+ * This function removes request from state tree and ordering list.
+ */
+void kst_del_req(struct dst_request *req)
+{
+	list_del_init(&req->request_list_entry);
+}
+EXPORT_SYMBOL_GPL(kst_del_req);
+
+static struct dst_request *kst_req_first(struct kst_state *st)
+{
+	struct dst_request *req = NULL;
+
+	if (!list_empty(&st->request_list))
+		req = list_entry(st->request_list.next, struct dst_request,
+				request_list_entry);
+	return req;
+}
+
+/*
+ * This function dequeues first request from the queue and tree.
+ */
+static struct dst_request *kst_dequeue_req(struct kst_state *st)
+{
+	struct dst_request *req;
+
+	mutex_lock(&st->request_lock);
+	req = kst_req_first(st);
+	if (req)
+		kst_del_req(req);
+	mutex_unlock(&st->request_lock);
+	return req;
+}
+
+/*
+ * This function enqueues request into tree, indexed by start of the request,
+ * and also puts request into ordered queue.
+ */
+int kst_enqueue_req(struct kst_state *st, struct dst_request *req)
+{
+	if (unlikely(req->flags & DST_REQ_CHECK_QUEUE)) {
+		struct dst_request *r;
+
+		list_for_each_entry(r, &st->request_list, request_list_entry) {
+			if (bio_rw(r->bio) != bio_rw(req->bio))
+				continue;
+
+			if (r->start >= req->start + req->size)
+				continue;
+
+			if (r->start + r->size <= req->start)
+				continue;
+
+			return -EEXIST;
+		}
+	}
+
+	list_add_tail(&req->request_list_entry, &st->request_list);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(kst_enqueue_req);
+
+/*
+ * BIOs for local exporting node are freed via this function.
+ */
+static void kst_export_put_bio(struct bio *bio)
+{
+	int i;
+	struct bio_vec *bv;
+
+	dprintk("%s: bio: %p, size: %u, idx: %d, num: %d, req: %p.\n",
+			__func__, bio, bio->bi_size, bio->bi_idx,
+			bio->bi_vcnt, bio->bi_private);
+
+	bio_for_each_segment(bv, bio, i)
+		__free_page(bv->bv_page);
+	bio_put(bio);
+}
+
+/*
+ * This is a generic request completion function for requests,
+ * queued for async processing.
+ * If it is local export node, state machine is different,
+ * see details below.
+ */
+void kst_complete_req(struct dst_request *req, int err)
+{
+	dprintk("%s: bio: %p, req: %p, size: %llu, orig_size: %llu, "
+			"bi_size: %u, err: %d, flags: %u.\n",
+			__func__, req->bio, req, req->size, req->orig_size,
+			req->bio->bi_size, err, req->flags);
+
+	if (req->flags & DST_REQ_EXPORT) {
+		if (err || !(req->flags & DST_REQ_EXPORT_WRITE)) {
+			req->bio_endio(req, err);
+			goto out;
+		}
+
+		req->bio->bi_rw = WRITE;
+		generic_make_request(req->bio);
+	} else {
+		req->bio_endio(req, err);
+	}
+out:
+	dst_free_request(req);
+}
+EXPORT_SYMBOL_GPL(kst_complete_req);
+
+static void kst_flush_requests(struct kst_state *st)
+{
+	struct dst_request *req;
+
+	while ((req = kst_dequeue_req(st)) != NULL)
+		kst_complete_req(req, -EIO);
+}
+
+static int kst_poll_init(struct kst_state *st)
+{
+	struct kst_poll_helper ph;
+
+	ph.st = st;
+	init_poll_funcptr(&ph.pt, &kst_queue_func);
+
+	st->socket->ops->poll(NULL, st->socket, &ph.pt);
+	return 0;
+}
+
+/*
+ * Main state creation function.
+ * It creates new state according to given operations
+ * and links it into worker structure and node.
+ */
+static struct kst_state *kst_state_init(struct dst_node *node,
+		unsigned int permissions,
+		struct kst_state_ops *ops, void *data)
+{
+	struct kst_state *st;
+	int err;
+
+	st = kzalloc(sizeof(struct kst_state), GFP_KERNEL);
+	if (!st)
+		return ERR_PTR(-ENOMEM);
+
+	st->permissions = permissions;
+	st->node = node;
+	st->ops = ops;
+	INIT_LIST_HEAD(&st->ready_entry);
+	INIT_LIST_HEAD(&st->entry);
+	INIT_LIST_HEAD(&st->request_list);
+	mutex_init(&st->request_lock);
+
+	err = st->ops->init(st, data);
+	if (err)
+		goto err_out_free;
+	mutex_lock(&node->w->state_mutex);
+	list_add_tail(&st->entry, &node->w->state_list);
+	mutex_unlock(&node->w->state_mutex);
+
+	kst_wake(st);
+
+	return st;
+
+err_out_free:
+	kfree(st);
+	return ERR_PTR(err);
+}
+
+/*
+ * This function is called when node is removed,
+ * or when state is destroyed for connected to local exporting
+ * node client.
+ */
+void kst_state_exit(struct kst_state *st)
+{
+	struct kst_worker *w = st->node->w;
+
+	mutex_lock(&w->state_mutex);
+	list_del_init(&st->entry);
+	mutex_unlock(&w->state_mutex);
+
+	st->ops->exit(st);
+
+	if (st == st->node->state)
+		st->node->state = NULL;
+
+	kfree(st);
+}
+
+static int kst_error(struct kst_state *st, int err)
+{
+	if ((err == -ECONNRESET || err == -EPIPE) && st->ops->recovery)
+		err = st->ops->recovery(st, err);
+
+	return st->node->st->alg->ops->error(st, err);
+}
+
+/*
+ * This is main state processing function.
+ * It tries to complete request and invoke appropriate
+ * callbacks in case of errors or successfull operation finish.
+ */
+static int kst_thread_process_state(struct kst_state *st)
+{
+	int err, empty;
+	unsigned int revents;
+	struct dst_request *req, *tmp;
+
+	mutex_lock(&st->request_lock);
+	if (st->ops->ready) {
+		err = st->ops->ready(st);
+		if (err) {
+			mutex_unlock(&st->request_lock);
+			if (err < 0)
+				kst_state_exit(st);
+			return err;
+		}
+	}
+
+	err = 0;
+	empty = 1;
+	req = NULL;
+	list_for_each_entry_safe(req, tmp, &st->request_list, request_list_entry) {
+		empty = 0;
+		revents = st->socket->ops->poll(st->socket->file,
+				st->socket, NULL);
+		if (!revents)
+			break;
+		err = req->callback(req, revents);
+		if (req->size && !err)
+			err = 1;
+
+		if (err < 0 || !req->size) {
+			if (!req->size)
+				err = 0;
+			kst_del_req(req);
+			kst_complete_req(req, err);
+		}
+
+		if (err)
+			break;
+	}
+
+	dprintk("%s: broke the loop: err: %d, list_empty: %d.\n",
+			__func__, err, list_empty(&st->request_list));
+	mutex_unlock(&st->request_lock);
+
+	if (err < 0) {
+		dprintk("%s: req: %p, err: %d, st: %p, node->state: %p.\n",
+			__func__, req, err, st, st->node->state);
+
+		if (st != st->node->state) {
+			/*
+			 * Accepted client has state not related to storage
+			 * node, so it must be freed explicitely.
+			 * We do not try to fix clients connections to local
+			 * export nodes, just drop the client.
+			 */
+
+			kst_state_exit(st);
+			return err;
+		}
+
+		err = kst_error(st, err);
+		if (err)
+			return err;
+
+		kst_wake(st);
+	}
+
+	if (list_empty(&st->request_list) && !empty)
+		kst_wake(st);
+
+	return err;
+}
+
+/*
+ * Main worker thread - one per storage.
+ */
+static int kst_thread_func(void *data)
+{
+	struct kst_worker *w = data;
+	struct kst_state *st;
+	unsigned long flags;
+	int err = 0;
+
+	while (!kthread_should_stop()) {
+		wait_event_interruptible_timeout(w->wait,
+			(!list_empty(&w->ready_list) && !list_empty(&w->state_list)) ||
+			kthread_should_stop(), HZ);
+		st = NULL;
+		spin_lock_irqsave(&w->ready_lock, flags);
+		if (!list_empty(&w->ready_list)) {
+			st = list_entry(w->ready_list.next, struct kst_state,
+				ready_entry);
+			list_del_init(&st->ready_entry);
+		}
+		spin_unlock_irqrestore(&w->ready_lock, flags);
+
+		if (!st)
+			continue;
+
+		err = kst_thread_process_state(st);
+	}
+
+	return err;
+}
+
+/*
+ * Worker initialization - this object will host andprocess all states,
+ * which in turn host requests for remote targets.
+ */
+struct kst_worker *kst_worker_init(int id)
+{
+	struct kst_worker *w;
+	int err;
+
+	w = kzalloc(sizeof(struct kst_worker), GFP_KERNEL);
+	if (!w)
+		return ERR_PTR(-ENOMEM);
+
+	w->id = id;
+	init_waitqueue_head(&w->wait);
+	spin_lock_init(&w->ready_lock);
+	mutex_init(&w->state_mutex);
+
+	INIT_LIST_HEAD(&w->ready_list);
+	INIT_LIST_HEAD(&w->state_list);
+
+	w->req_pool = mempool_create_slab_pool(256, dst_request_cache);
+	if (!w->req_pool) {
+		err = -ENOMEM;
+		goto err_out_free;
+	}
+
+	w->thread = kthread_run(&kst_thread_func, w, "kst%d", w->id);
+	if (IS_ERR(w->thread)) {
+		err = PTR_ERR(w->thread);
+		goto err_out_destroy;
+	}
+
+	mutex_lock(&kst_worker_mutex);
+	list_add_tail(&w->entry, &kst_worker_list);
+	mutex_unlock(&kst_worker_mutex);
+
+	return w;
+
+err_out_destroy:
+	mempool_destroy(w->req_pool);
+err_out_free:
+	kfree(w);
+	return ERR_PTR(err);
+}
+
+void kst_worker_exit(struct kst_worker *w)
+{
+	struct kst_state *st, *n;
+
+	mutex_lock(&kst_worker_mutex);
+	list_del(&w->entry);
+	mutex_unlock(&kst_worker_mutex);
+
+	kthread_stop(w->thread);
+
+	list_for_each_entry_safe(st, n, &w->state_list, entry) {
+		kst_state_exit(st);
+	}
+
+	mempool_destroy(w->req_pool);
+	kfree(w);
+}
+
+/*
+ * Common state exit callback.
+ * Removes itself from worker's list of states,
+ * releases socket and flushes all requests.
+ */
+static void kst_common_exit(struct kst_state *st)
+{
+	unsigned long flags;
+	struct kst_worker *w = st->node->w;
+
+	kst_poll_exit(st);
+
+	spin_lock_irqsave(&w->ready_lock, flags);
+	list_del_init(&st->ready_entry);
+	spin_unlock_irqrestore(&w->ready_lock, flags);
+
+	kst_flush_requests(st);
+	kst_sock_release(st);
+}
+
+/*
+ * Listen socket contains security attributes in request_list,
+ * so it can not be flushed via usual way.
+ */
+static void kst_listen_flush(struct kst_state *st)
+{
+	struct dst_secure *s, *tmp;
+
+	list_for_each_entry_safe(s, tmp, &st->request_list, sec_entry) {
+		list_del(&s->sec_entry);
+		kfree(s);
+	}
+}
+
+static void kst_listen_exit(struct kst_state *st)
+{
+	kst_listen_flush(st);
+	kst_common_exit(st);
+}
+
+/*
+ * BIO vector receiving function - does not block, but may sleep because
+ * of scheduling policy.
+ */
+static int kst_data_recv_bio_vec(struct kst_state *st, struct bio_vec *bv,
+		unsigned int offset, unsigned int size)
+{
+	struct msghdr msg;
+	struct kvec iov;
+	void *kaddr;
+	int err;
+
+	kaddr = kmap(bv->bv_page);
+
+	iov.iov_base = kaddr + bv->bv_offset + offset;
+	iov.iov_len = size;
+
+	msg.msg_iov = (struct iovec *)&iov;
+	msg.msg_iovlen = 1;
+	msg.msg_name = NULL;
+	msg.msg_namelen = 0;
+	msg.msg_control = NULL;
+	msg.msg_controllen = 0;
+	msg.msg_flags = MSG_DONTWAIT | MSG_NOSIGNAL;
+
+	err = kernel_recvmsg(st->socket, &msg, &iov, 1, iov.iov_len,
+			msg.msg_flags);
+	kunmap(bv->bv_page);
+
+	return err;
+}
+
+/*
+ * BIO vector sending function - does not block, but may sleep because
+ * of scheduling policy.
+ */
+static int kst_data_send_bio_vec(struct kst_state *st, struct bio_vec *bv,
+		unsigned int offset, unsigned int size)
+{
+	return kernel_sendpage(st->socket, bv->bv_page,
+			bv->bv_offset + offset, size,
+			MSG_DONTWAIT | MSG_NOSIGNAL);
+}
+
+static int kst_data_send_bio_vec_slow(struct kst_state *st, struct bio_vec *bv,
+		unsigned int offset, unsigned int size)
+{
+	struct msghdr msg;
+	struct kvec iov;
+	void *addr;
+	int err;
+
+	addr = kmap(bv->bv_page);
+	iov.iov_base = addr + bv->bv_offset + offset;
+	iov.iov_len = size;
+
+	msg.msg_iov = (struct iovec *)&iov;
+	msg.msg_iovlen = 1;
+	msg.msg_name = NULL;
+	msg.msg_namelen = 0;
+	msg.msg_control = NULL;
+	msg.msg_controllen = 0;
+	msg.msg_flags = MSG_DONTWAIT | MSG_NOSIGNAL;
+
+	err = kernel_sendmsg(st->socket, &msg, &iov, 1, iov.iov_len);
+	kunmap(bv->bv_page);
+
+	return err;
+}
+
+static u32 dst_csum_bvec(struct bio_vec *bv, unsigned int offset, unsigned int size)
+{
+	void *addr;
+	u32 csum;
+
+	addr = kmap_atomic(bv->bv_page, KM_USER0);
+	csum =  dst_csum_data(addr + bv->bv_offset + offset, size);
+	kunmap_atomic(addr, KM_USER0);
+
+	return csum;
+}
+
+typedef int (*kst_data_process_bio_vec_t)(struct kst_state *st,
+		struct bio_vec *bv, unsigned int offset, unsigned int size);
+
+/*
+ * @req: processing request.
+ * Contains BIO and all related to its processing info.
+ *
+ * This function sends or receives requested number of pages from given BIO.
+ *
+ * In case of errors negative value is returned and @size,
+ * @index and @off are set to the:
+ * - number of bytes not yet processed (i.e. the rest of the bytes to be
+ *   processed).
+ * - index of the last bio_vec started to be processed (header sent).
+ * - offset of the first byte to be processed in the bio_vec.
+ *
+ * If there are no errors, zero is returned.
+ * -EAGAIN is not an error and is transformed into zero return value,
+ * called must check if @size is zero, in that case whole BIO is processed
+ * and thus req->bio_endio() can be called, othervise new request must be allocated
+ * to be processed later.
+ */
+static int kst_data_process_bio(struct dst_request *req)
+{
+	int err = -ENOSPC;
+	struct dst_remote_request r;
+	kst_data_process_bio_vec_t func;
+	unsigned int cur_size;
+	int use_csum = test_bit(DST_NODE_USE_CSUM, &req->node->flags);
+
+	if (bio_rw(req->bio) == WRITE) {
+		int i;
+
+		func = kst_data_send_bio_vec;
+		for (i=req->idx; i<req->num; ++i) {
+			struct bio_vec *bv = bio_iovec_idx(req->bio, i);
+
+			if (PageSlab(bv->bv_page)) {
+				func = kst_data_send_bio_vec_slow;
+				break;
+			}
+		}
+		r.cmd = cpu_to_be32(DST_WRITE);
+	} else {
+		r.cmd = cpu_to_be32(DST_READ);
+		func = kst_data_recv_bio_vec;
+	}
+
+	dprintk("%s: start: [%c], state: %p, node: %p, start: %llu, idx: %d, num: %d, "
+			"size: %llu, offset: %u, flags: %x, use_csum: %d.\n",
+			__func__, (bio_rw(req->bio) == WRITE)?'W':'R', req->state, req->node,
+			req->start, req->idx, req->num, req->size, req->offset,
+			req->flags, use_csum);
+
+	while (req->idx < req->num) {
+		struct bio_vec *bv = bio_iovec_idx(req->bio, req->idx);
+
+		cur_size = min_t(u64, bv->bv_len - req->offset, req->size);
+
+		dprintk("%s: page: %p, slab: %d, count: %d, max: %d, off: %u, len: %u, req->offset: %u, "
+				"req->size: %llu, cur_size: %u, flags: %x, "
+				"use_csum: %d, req->csum: %x.\n",
+				__func__, bv->bv_page, PageSlab(bv->bv_page),
+				atomic_read(&bv->bv_page->_count), req->bio->bi_vcnt,
+				bv->bv_offset, bv->bv_len,
+				req->offset, req->size, cur_size,
+				req->flags, use_csum, req->tmp_csum);
+
+		if (cur_size == 0) {
+			printk(KERN_ERR "%s: %d/%d: start: %llu, "
+				"bv_offset: %u, bv_len: %u, "
+				"req_offset: %u, req_size: %llu, "
+				"req: %p, bio: %p, err: %d.\n",
+				__func__, req->idx, req->num, req->start,
+				bv->bv_offset, bv->bv_len,
+				req->offset, req->size,
+				req, req->bio, err);
+			BUG();
+		}
+
+		if (!(req->flags & DST_REQ_HEADER_SENT)) {
+			r.sector = cpu_to_be64(req->start);
+			r.offset = cpu_to_be32(bv->bv_offset + req->offset);
+			r.size = cpu_to_be32(cur_size);
+			r.csum = 0;
+
+			if (use_csum && bio_rw(req->bio) == WRITE &&
+					!req->tmp_offset) {
+				req->tmp_offset = req->offset;
+				r.csum = cpu_to_be32(dst_csum_bvec(bv,
+						req->offset, cur_size));
+			}
+
+			err = dst_data_send_header(req->state->socket, &r);
+			dprintk("%s: %d/%d: sending header: cmd: %u, start: %llu, "
+				"bv_offset: %u, bv_len: %u, "
+				"a offset: %u, offset: %u, "
+				"cur_size: %u, err: %d.\n",
+				__func__, req->idx, req->num, be32_to_cpu(r.cmd),
+				req->start, bv->bv_offset, bv->bv_len,
+				bv->bv_offset + req->offset,
+				req->offset, cur_size, err);
+
+			if (err != sizeof(struct dst_remote_request)) {
+				if (err >= 0)
+					err = -EINVAL;
+				break;
+			}
+
+			req->flags |= DST_REQ_HEADER_SENT;
+		}
+
+		if (use_csum && (bio_rw(req->bio) != WRITE) &&
+				!(req->flags & DST_REQ_CHEKSUM_RECV)) {
+			struct dst_remote_request tmp_req;
+
+			err = dst_data_recv_header(req->state->socket, &tmp_req, 0);
+			dprintk("%s: %d/%d: receiving header: start: %llu, "
+				"bv_offset: %u, bv_len: %u, "
+				"a offset: %u, offset: %u, "
+				"cur_size: %u, err: %d.\n",
+				__func__, req->idx, req->num,
+				req->start, bv->bv_offset, bv->bv_len,
+				bv->bv_offset + req->offset,
+				req->offset, cur_size, err);
+
+			if (err != sizeof(struct dst_remote_request)) {
+				if (err >= 0)
+					err = -EINVAL;
+				break;
+			}
+
+			if (req->tmp_csum) {
+				printk(KERN_ERR "%s: req: %p, old csum: %x, new: %x.\n",
+						__func__, req, req->tmp_csum,
+						be32_to_cpu(tmp_req.csum));
+				BUG_ON(1);
+			}
+
+			dprintk("%s: req: %p, old csum: %x, new: %x.\n",
+					__func__, req, req->tmp_csum,
+					be32_to_cpu(tmp_req.csum));
+			req->tmp_csum = be32_to_cpu(tmp_req.csum);
+
+			req->flags |= DST_REQ_CHEKSUM_RECV;
+		}
+
+		err = func(req->state, bv, req->offset, cur_size);
+		if (err <= 0)
+			break;
+
+		req->offset += err;
+		req->size -= err;
+
+		if (req->offset != bv->bv_len) {
+			dprintk("%s: %d/%d: this: start: %llu, bv_offset: %u, "
+				"bv_len: %u, offset: %u, "
+				"cur_size: %u, err: %d.\n",
+				__func__, req->idx, req->num, req->start,
+				bv->bv_offset, bv->bv_len,
+				req->offset, cur_size, err);
+			err = -EAGAIN;
+			break;
+		}
+
+		if (use_csum && bio_rw(req->bio) != WRITE) {
+			u32 csum = dst_csum_bvec(bv, req->tmp_offset,
+					bv->bv_len - req->tmp_offset);
+
+			dprintk("%s: req: %p, csum: %x, received csum: %x.\n",
+					__func__, req, csum, req->tmp_csum);
+
+			if (csum != req->tmp_csum) {
+				if (printk_ratelimit()) {
+					printk(KERN_INFO "%s: %d/%d: broken checksum: start: %llu, "
+						"bv_offset: %u, bv_len: %u, "
+						"a offset: %u, offset: %u, "
+						"cur_size: %u, orig_size: %llu.\n",
+						__func__, req->idx, req->num,
+						req->start, bv->bv_offset, bv->bv_len,
+						bv->bv_offset + req->offset,
+						req->offset, cur_size, req->orig_size);
+					printk(KERN_INFO "%s: broken checksum: req: %p, csum: %x, "
+						"should be: %x, flags: %x, "
+						"req->tmp_offset: %u, rw: %lu.\n",
+						__func__, req, csum, req->tmp_csum,
+						req->flags, req->tmp_offset, bio_rw(req->bio));
+				}
+
+				req->offset -= err;
+				req->size += err;
+
+				err = -EREMOTEIO;
+				break;
+			}
+		}
+
+		req->offset = 0;
+		req->idx++;
+		req->flags &= ~(DST_REQ_HEADER_SENT | DST_REQ_CHEKSUM_RECV);
+		req->tmp_csum = 0;
+		req->start += to_sector(bv->bv_len);
+	}
+
+	if (err <= 0 && err != -EAGAIN) {
+		if (err == 0)
+			err = -ECONNRESET;
+	} else
+		err = 0;
+
+	if (err < 0 || (req->idx == req->num && req->size)) {
+		dprintk("%s: return: idx: %d, num: %d, offset: %u, "
+				"size: %llu, err: %d.\n",
+			__func__, req->idx, req->num, req->offset,
+			req->size, err);
+	}
+	dprintk("%s: end: start: %llu, idx: %d, num: %d, "
+			"size: %llu, offset: %u.\n",
+		__func__, req->start, req->idx, req->num,
+		req->size, req->offset);
+
+	return err;
+}
+
+void kst_bio_endio(struct dst_request *req, int err)
+{
+	if (err && printk_ratelimit())
+		printk(KERN_INFO "%s: freeing bio: %p, bi_size: %u, "
+			"orig_size: %llu, req: %p, err: %d.\n",
+		__func__, req->bio, req->bio->bi_size, req->orig_size,
+		req, err);
+	bio_endio(req->bio, req->orig_size, err);
+}
+EXPORT_SYMBOL_GPL(kst_bio_endio);
+
+/*
+ * This callback is invoked by worker thread to process given request.
+ */
+int kst_data_callback(struct dst_request *req, unsigned int revents)
+{
+	int err;
+
+	dprintk("%s: req: %p, num: %d, idx: %d, bio: %p, "
+			"revents: %x, flags: %x.\n",
+			__func__, req, req->num, req->idx, req->bio,
+			revents, req->flags);
+
+	if (req->flags & DST_REQ_EXPORT_READ)
+		return 1;
+
+	err = kst_data_process_bio(req);
+
+	if (revents & (POLLERR | POLLHUP | POLLRDHUP))
+		err = -EPIPE;
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(kst_data_callback);
+
+struct dst_request *dst_clone_request(struct dst_request *req, mempool_t *pool)
+{
+	struct dst_request *new_req;
+
+	new_req = mempool_alloc(pool, GFP_NOIO);
+	if (!new_req)
+		return NULL;
+
+	memset(new_req, 0, sizeof(struct dst_request));
+
+	dprintk("%s: req: %p, new_req: %p.\n", __func__, req, new_req);
+
+	if (req) {
+		new_req->bio = req->bio;
+		new_req->state = req->state;
+		new_req->node = req->node;
+		new_req->idx = req->idx;
+		new_req->num = req->num;
+		new_req->size = req->size;
+		new_req->orig_size = req->orig_size;
+		new_req->offset = req->offset;
+		new_req->tmp_offset = req->tmp_offset;
+		new_req->tmp_csum = req->tmp_csum;
+		new_req->start = req->start;
+		new_req->flags = req->flags;
+		new_req->bio_endio = req->bio_endio;
+		new_req->priv = req->priv;
+	}
+
+	return new_req;
+}
+EXPORT_SYMBOL_GPL(dst_clone_request);
+
+void dst_free_request(struct dst_request *req)
+{
+	dprintk("%s: free req: %p, pool: %p, bio: %p, state: %p, node: %p.\n",
+			__func__, req, req->node->w->req_pool,
+			req->bio, req->state, req->node);
+	mempool_free(req, req->node->w->req_pool);
+}
+EXPORT_SYMBOL_GPL(dst_free_request);
+
+/*
+ * This is main data processing function, eventually invoked from block layer.
+ * It tries to complte request, but if it is about to block, it allocates
+ * new request and queues it to main worker to be processed when events allow.
+ */
+static int kst_data_push(struct dst_request *req)
+{
+	struct kst_state *st = req->state;
+	struct dst_request *new_req;
+	unsigned int revents;
+	int err, locked = 0;
+
+	dprintk("%s: start: %llu, size: %llu, bio: %p.\n",
+			__func__, req->start, req->size, req->bio);
+
+	if (!list_empty(&st->request_list) || (req->flags & DST_REQ_ALWAYS_QUEUE))
+		goto alloc_new_req;
+
+	if (mutex_trylock(&st->request_lock)) {
+		locked = 1;
+
+		if (!list_empty(&st->request_list))
+			goto alloc_new_req;
+
+		revents = st->socket->ops->poll(NULL, st->socket, NULL);
+		if (revents & POLLOUT) {
+			err = kst_data_process_bio(req);
+			if (err < 0)
+				goto out_unlock;
+
+			if (!req->size)
+				goto out_bio_endio;
+		}
+	}
+
+alloc_new_req:
+	err = -ENOMEM;
+	new_req = dst_clone_request(req, req->node->w->req_pool);
+	if (!new_req)
+		goto out_unlock;
+
+	new_req->callback = &kst_data_callback;
+
+	if (!locked)
+		mutex_lock(&st->request_lock);
+
+	locked = 1;
+
+	err = kst_enqueue_req(st, new_req);
+	if (err)
+		goto out_unlock;
+	mutex_unlock(&st->request_lock);
+
+	err = 0;
+	goto out;
+
+out_bio_endio:
+	req->bio_endio(req, err);
+out_unlock:
+	if (locked)
+		mutex_unlock(&st->request_lock);
+	locked = 0;
+
+	if (err) {
+		err = kst_error(st, err);
+		if (!err)
+			goto alloc_new_req;
+	}
+
+	if (err && printk_ratelimit()) {
+		printk(KERN_INFO "%s: error [%c], start: %llu, idx: %d, num: %d, "
+				"size: %llu, offset: %u, err: %d.\n",
+			__func__, (bio_rw(req->bio) == WRITE)?'W':'R',
+			req->start, req->idx, req->num, req->size,
+			req->offset, err);
+	}
+
+out:
+
+	kst_wake(st);
+	return err;
+}
+
+/*
+ * Remote node initialization callback.
+ */
+static int kst_data_init(struct kst_state *st, void *data)
+{
+	int err;
+
+	st->socket = data;
+	st->socket->sk->sk_allocation = GFP_NOIO;
+	/*
+	 * Why not?
+	 */
+	st->socket->sk->sk_sndbuf = st->socket->sk->sk_sndbuf = 1024*1024*10;
+
+	err = kst_poll_init(st);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+/*
+ * Remote node recovery function - tries to reconnect to given target.
+ */
+static int kst_data_recovery(struct kst_state *st, int err)
+{
+	struct socket *sock;
+	struct sockaddr addr;
+	int addrlen;
+	struct dst_request *req;
+
+	if (err != -ECONNRESET && err != -EPIPE) {
+		dprintk("%s: state %p does not know how "
+				"to recover from error %d.\n",
+				__func__, st, err);
+		return err;
+	}
+
+	err = sock_create(st->socket->ops->family, st->socket->type,
+			st->socket->sk->sk_protocol, &sock);
+	if (err < 0)
+		goto err_out_exit;
+
+	sock->sk->sk_sndtimeo = sock->sk->sk_rcvtimeo =
+		msecs_to_jiffies(DST_DEFAULT_TIMEO);
+
+	err = sock->ops->getname(st->socket, &addr, &addrlen, 2);
+	if (err)
+		goto err_out_destroy;
+
+	err = sock->ops->connect(sock, &addr, addrlen, 0);
+	if (err)
+		goto err_out_destroy;
+
+	kst_poll_exit(st);
+	kst_sock_release(st);
+
+	mutex_lock(&st->request_lock);
+	err = st->ops->init(st, sock);
+	if (!err) {
+		/*
+		 * After reconnection is completed all requests
+		 * must be resent from the state they were finished previously,
+		 * but with new headers.
+		 */
+		list_for_each_entry(req, &st->request_list, request_list_entry)
+			req->flags &= ~(DST_REQ_HEADER_SENT | DST_REQ_CHEKSUM_RECV);
+	}
+	mutex_unlock(&st->request_lock);
+	if (err < 0)
+		goto err_out_destroy;
+
+	kst_wake(st);
+	dprintk("%s: reconnected.\n", __func__);
+
+	return 0;
+
+err_out_destroy:
+	sock_release(sock);
+err_out_exit:
+	dprintk("%s: recovery failed: st: %p, err: %d.\n", __func__, st, err);
+	return err;
+}
+
+/*
+ * Local exporting node end IO callbacks.
+ */
+static int kst_export_write_end_io(struct bio *bio, unsigned int size, int err)
+{
+	dprintk("%s: bio: %p, size: %u, idx: %d, num: %d, err: %d.\n",
+		__func__, bio, bio->bi_size, bio->bi_idx, bio->bi_vcnt, err);
+
+	if (bio->bi_size)
+		return 1;
+
+	kst_export_put_bio(bio);
+	return 0;
+}
+
+static int kst_export_read_end_io(struct bio *bio, unsigned int size, int err)
+{
+	struct dst_request *req = bio->bi_private;
+	struct kst_state *st = req->state;
+	int use_csum = test_bit(DST_NODE_USE_CSUM, &req->node->flags);
+
+	dprintk("%s: bio: %p, req: %p, size: %u, idx: %d, num: %d, err: %d.\n",
+		__func__, bio, req, bio->bi_size, bio->bi_idx,
+		bio->bi_vcnt, err);
+
+	if (bio->bi_size)
+		return 1;
+
+	if (err) {
+		kst_export_put_bio(bio);
+		return 0;
+	}
+
+	bio->bi_size = req->size = req->orig_size;
+	bio->bi_rw = WRITE;
+	bio->bi_end_io = kst_export_write_end_io;
+	if (use_csum)
+		req->flags &= ~(DST_REQ_HEADER_SENT | DST_REQ_CHEKSUM_RECV);
+
+	/*
+	 * This is a race with kst_data_callback(), which checks
+	 * this bit to determine if it can or can not process given
+	 * request. This does not harm actually, since subsequent
+	 * state wakeup will call it again and thus will pick
+	 * given request in time.
+	 */
+	req->flags &= ~DST_REQ_EXPORT_READ;
+	kst_wake(st);
+	return 0;
+}
+
+/*
+ * This callback is invoked each time new request from remote
+ * node to given local export node is received.
+ * It allocates new block IO request and queues it for processing.
+ */
+static int kst_export_ready(struct kst_state *st)
+{
+	struct dst_remote_request r;
+	struct bio *bio;
+	int err, nr, i;
+	struct dst_request *req;
+	unsigned int revents = st->socket->ops->poll(NULL, st->socket, NULL);
+
+	if (revents & (POLLERR | POLLHUP)) {
+		err = -EPIPE;
+		goto err_out_exit;
+	}
+
+	if (!(revents & POLLIN) || !list_empty(&st->request_list))
+		return 0;
+
+	err = dst_data_recv_header(st->socket, &r, 1);
+	if (err != sizeof(struct dst_remote_request)) {
+		err = -ECONNRESET;
+		goto err_out_exit;
+	}
+
+	kst_convert_header(&r);
+
+	dprintk("\n%s: st: %p, cmd: %u, sector: %llu, size: %u, "
+			"csum: %x, offset: %u.\n",
+			__func__, st, r.cmd, r.sector,
+			r.size, r.csum, r.offset);
+
+	err = -EINVAL;
+	if (r.cmd != DST_READ && r.cmd != DST_WRITE && r.cmd != DST_REMOTE_CFG)
+		goto err_out_exit;
+
+	if ((s64)(r.sector + to_sector(r.size)) < 0 ||
+		(r.sector + to_sector(r.size)) > st->node->size ||
+		r.offset >= PAGE_SIZE)
+		goto err_out_exit;
+
+	if (r.cmd == DST_REMOTE_CFG) {
+		r.sector = st->node->size;
+
+		if (test_bit(DST_NODE_USE_CSUM, &st->node->flags))
+			r.csum = 1;
+
+		kst_convert_header(&r);
+
+		err = dst_data_send_header(st->socket, &r);
+		if (err != sizeof(struct dst_remote_request)) {
+			err = -EINVAL;
+			goto err_out_exit;
+		}
+		kst_wake(st);
+		return 0;
+	}
+
+	nr = DIV_ROUND_UP(r.size, PAGE_SIZE);
+
+	while (r.size) {
+		int nr_pages = min(BIO_MAX_PAGES, nr);
+		unsigned int size;
+		struct page *page;
+
+		err = -ENOMEM;
+		req = dst_clone_request(NULL, st->node->w->req_pool);
+		if (!req)
+			goto err_out_exit;
+
+		bio = bio_alloc(GFP_NOIO, nr_pages);
+		if (!bio)
+			goto err_out_free_req;
+
+		req->flags = DST_REQ_EXPORT | DST_REQ_HEADER_SENT |
+				DST_REQ_CHEKSUM_RECV;
+		req->bio = bio;
+		req->state = st;
+		req->node = st->node;
+		req->callback = &kst_data_callback;
+		req->bio_endio = &kst_bio_endio;
+
+		req->tmp_offset = 0;
+		req->tmp_csum = r.csum;
+
+		/*
+		 * Yes, looks a bit weird.
+		 * Logic is simple - for local exporting node all operations
+		 * are reversed compared to usual nodes, since usual nodes
+		 * process remote data and local export node process remote
+		 * requests, so that writing data means sending data to
+		 * remote node and receiving on the local export one.
+		 *
+		 * So, to process writing to the exported node we need first
+		 * to receive data from the net (i.e. to perform READ
+		 * operationin terms of usual node), and then put it to the
+		 * storage (WRITE command, so it will be changed before
+		 * calling generic_make_request()).
+		 *
+		 * To process read request from the exported node we need
+		 * first to read it from storage (READ command for BIO)
+		 * and then send it over the net (perform WRITE operation
+		 * in terms of network).
+		 */
+		if (r.cmd == DST_WRITE) {
+			req->flags |= DST_REQ_EXPORT_WRITE;
+			bio->bi_end_io = kst_export_write_end_io;
+		} else {
+			req->flags |= DST_REQ_EXPORT_READ;
+			bio->bi_end_io = kst_export_read_end_io;
+		}
+		bio->bi_rw = READ;
+		bio->bi_private = req;
+		bio->bi_sector = r.sector;
+		bio->bi_bdev = st->node->bdev;
+
+		for (i = 0; i < nr_pages; ++i) {
+			page = alloc_page(GFP_NOIO);
+			if (!page)
+				break;
+
+			size = min_t(u32, PAGE_SIZE - r.offset, r.size);
+
+			err = bio_add_page(bio, page, size, 0);
+			dprintk("%s: %d/%d: page: %p, size: %u, "
+					"offset: %u (used zero), err: %d.\n",
+					__func__, i, nr_pages, page, size,
+					r.offset, err);
+			if (err <= 0)
+				break;
+
+			if (err == size)
+				nr--;
+
+			r.size -= err;
+			r.sector += to_sector(err);
+
+			if (!r.size)
+				break;
+		}
+
+		if (!bio->bi_vcnt) {
+			err = -ENOMEM;
+			goto err_out_put;
+		}
+
+		req->size = req->orig_size = bio->bi_size;
+		req->start = bio->bi_sector;
+		req->idx = 0;
+		req->num = bio->bi_vcnt;
+
+		dprintk("%s: submitting: bio: %p, req: %p, start: %llu, "
+			"size: %llu, idx: %d, num: %d, offset: %u, csum: %x.\n",
+			__func__, bio, req, req->start, req->size,
+			req->idx, req->num, req->offset, req->tmp_csum);
+
+		err = kst_enqueue_req(st, req);
+		if (err)
+			goto err_out_put;
+
+		if (r.cmd == DST_READ) {
+			generic_make_request(bio);
+		}
+	}
+
+	kst_wake(st);
+	return 0;
+
+err_out_put:
+	bio_put(bio);
+err_out_free_req:
+	dst_free_request(req);
+err_out_exit:
+	return err;
+}
+
+static void kst_export_exit(struct kst_state *st)
+{
+	struct dst_node *n = st->node;
+
+	kst_common_exit(st);
+	dst_node_put(n);
+}
+
+static struct kst_state_ops kst_data_export_ops = {
+	.init = &kst_data_init,
+	.push = &kst_data_push,
+	.exit = &kst_export_exit,
+	.ready = &kst_export_ready,
+};
+
+/*
+ * This callback is invoked each time listening socket for
+ * given local export node becomes ready.
+ * It creates new state for connected client and queues for processing.
+ */
+static int kst_listen_ready(struct kst_state *st)
+{
+	struct socket *newsock;
+	struct saddr *addr;
+	struct kst_state *newst;
+	int err;
+	unsigned int revents, permissions = 0;
+	struct dst_secure *s;
+
+	revents = st->socket->ops->poll(NULL, st->socket, NULL);
+	if (!(revents & POLLIN))
+		return 1;
+
+	addr = kmalloc(sizeof(struct saddr), GFP_KERNEL);
+	if (!addr)
+		goto err_out_exit;
+
+	err = sock_create(st->socket->ops->family, st->socket->type,
+			st->socket->sk->sk_protocol, &newsock);
+	if (err)
+		goto err_out_free;
+
+	err = st->socket->ops->accept(st->socket, newsock, 0);
+	if (err)
+		goto err_out_put;
+
+	if (newsock->ops->getname(newsock, (struct sockaddr *)addr,
+				  (int *)&addr->sa_data_len, 2) < 0) {
+		err = -ECONNABORTED;
+		goto err_out_put;
+	}
+
+	list_for_each_entry(s, &st->request_list, sec_entry) {
+		void *sec_addr, *new_addr;
+
+		sec_addr = ((void *)&s->sec.addr) + s->sec.check_offset;
+		new_addr = ((void *)addr) + s->sec.check_offset;
+
+		if (!memcmp(sec_addr, new_addr,
+				addr->sa_data_len - s->sec.check_offset)) {
+			permissions = s->sec.permissions;
+			break;
+		}
+	}
+
+	/*
+	 * So far only reading and writing are supported.
+	 * Block device does not know about anything else,
+	 * but as far as I recall, there was a prognosis,
+	 * that computer will never require more than 640kb of RAM.
+	 */
+	if (permissions == 0) {
+		err = -EPERM;
+		goto err_out_put;
+	}
+
+	if (st->socket->ops->family == AF_INET) {
+		struct sockaddr_in *sin = (struct sockaddr_in *)addr;
+		printk(KERN_INFO "%s: Client: %u.%u.%u.%u:%d.\n", __func__,
+			NIPQUAD(sin->sin_addr.s_addr), ntohs(sin->sin_port));
+	} else if (st->socket->ops->family == AF_INET6) {
+		struct sockaddr_in6 *sin = (struct sockaddr_in6 *)addr;
+		printk(KERN_INFO "%s: Client: "
+			"%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x:%d",
+			__func__,
+			NIP6(sin->sin6_addr), ntohs(sin->sin6_port));
+	}
+
+	dst_node_get(st->node);
+	newst = kst_state_init(st->node, permissions,
+			&kst_data_export_ops, newsock);
+	if (IS_ERR(newst)) {
+		err = PTR_ERR(newst);
+		goto err_out_put;
+	}
+
+	kfree(addr);
+
+	/*
+	 * Negative return value means error, positive - stop this state
+	 * processing. Zero allows to check state for pending requests.
+	 * Listening socket contains security objects in request list,
+	 * since it does not have any requests.
+	 */
+	return 1;
+
+err_out_put:
+	sock_release(newsock);
+err_out_free:
+	kfree(addr);
+err_out_exit:
+	return 1;
+}
+
+static int kst_listen_init(struct kst_state *st, void *data)
+{
+	int err = -ENOMEM, i;
+	struct dst_le_template *tmp = data;
+	struct dst_secure *s;
+
+	for (i=0; i<tmp->le->secure_attr_num; ++i) {
+		s = kmalloc(sizeof(struct dst_secure), GFP_KERNEL);
+		if (!s)
+			goto err_out_exit;
+
+		memcpy(&s->sec, tmp->data, sizeof(struct dst_secure_user));
+
+		list_add_tail(&s->sec_entry, &st->request_list);
+		tmp->data += sizeof(struct dst_secure_user);
+
+		if (s->sec.addr.sa_family == AF_INET) {
+			struct sockaddr_in *sin =
+				(struct sockaddr_in *)&s->sec.addr;
+			printk(KERN_INFO "%s: Client: %u.%u.%u.%u:%d, "
+					"permissions: %x.\n",
+				__func__, NIPQUAD(sin->sin_addr.s_addr),
+				ntohs(sin->sin_port), s->sec.permissions);
+		} else if (s->sec.addr.sa_family == AF_INET6) {
+			struct sockaddr_in6 *sin =
+				(struct sockaddr_in6 *)&s->sec.addr;
+			printk(KERN_INFO "%s: Client: "
+				"%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x:%d, "
+				"permissions: %x.\n",
+				__func__, NIP6(sin->sin6_addr),
+				ntohs(sin->sin6_port), s->sec.permissions);
+		}
+	}
+
+	err = kst_sock_create(st, &tmp->le->rctl.addr, tmp->le->rctl.type,
+			tmp->le->rctl.proto, tmp->le->backlog);
+	if (err)
+		goto err_out_exit;
+
+	err = kst_poll_init(st);
+	if (err)
+		goto err_out_release;
+
+	return 0;
+
+err_out_release:
+	kst_sock_release(st);
+err_out_exit:
+	kst_listen_flush(st);
+	return err;
+}
+
+/*
+ * Operations for different types of states.
+ * There are three:
+ * data state - created for remote node, when distributed storage connects
+ * 	to remote node, which contain data.
+ * listen state - created for local export node, when remote distributed
+ * 	storage's node connects to given node to get/put data.
+ * data export state - created for each client connected to above listen
+ * 	state.
+ */
+static struct kst_state_ops kst_listen_ops = {
+	.init = &kst_listen_init,
+	.exit = &kst_listen_exit,
+	.ready = &kst_listen_ready,
+};
+static struct kst_state_ops kst_data_ops = {
+	.init = &kst_data_init,
+	.push = &kst_data_push,
+	.exit = &kst_common_exit,
+	.recovery = &kst_data_recovery,
+};
+
+struct kst_state *kst_listener_state_init(struct dst_node *node,
+		struct dst_le_template *tmp)
+{
+	return kst_state_init(node, DST_PERM_READ | DST_PERM_WRITE,
+			&kst_listen_ops, tmp);
+}
+
+struct kst_state *kst_data_state_init(struct dst_node *node,
+		struct socket *newsock)
+{
+	return kst_state_init(node, DST_PERM_READ | DST_PERM_WRITE,
+			&kst_data_ops, newsock);
+}
+
+/*
+ * Remove all workers and associated states.
+ */
+void kst_exit_all(void)
+{
+	struct kst_worker *w, *n;
+
+	list_for_each_entry_safe(w, n, &kst_worker_list, entry) {
+		kst_worker_exit(w);
+	}
+}
#5 lore raw

PATCH 4/4 DST: Algorithms used in distributed storage.

Algorithms used in distributed storage.
Mirror and linear mapping code.

drivers/block/dst/alg_linear.c new file +105 -0
new file mode 100644
index 0000000..2f9ed65
@@ -0,0 +1,105 @@
+/*
+ * 2007+ Copyright (c) Evgeniy Polyakov <[email protected]>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/dst.h>
+
+static struct dst_alg *alg_linear;
+
+/*
+ * This callback is invoked when node is removed from storage.
+ */
+static void dst_linear_del_node(struct dst_node *n)
+{
+}
+
+/*
+ * This callback is invoked when node is added to storage.
+ */
+static int dst_linear_add_node(struct dst_node *n)
+{
+	struct dst_storage *st = n->st;
+
+	dprintk("%s: disk_size: %llu, node_size: %llu.\n",
+			__func__, st->disk_size, n->size);
+
+	mutex_lock(&st->tree_lock);
+	n->start = st->disk_size;
+	st->disk_size += n->size;
+	dst_set_disk_size(st);
+	mutex_unlock(&st->tree_lock);
+
+	return 0;
+}
+
+static int dst_linear_remap(struct dst_request *req)
+{
+	int err;
+
+	if (req->node->bdev) {
+		generic_make_request(req->bio);
+		return 0;
+	}
+
+	err = kst_check_permissions(req->state, req->bio);
+	if (err)
+		return err;
+
+	return req->state->ops->push(req);
+}
+
+/*
+ * Failover callback - it is invoked each time error happens during
+ * request processing.
+ */
+static int dst_linear_error(struct kst_state *st, int err)
+{
+	if (err)
+		set_bit(DST_NODE_FROZEN, &st->node->flags);
+	else
+		clear_bit(DST_NODE_FROZEN, &st->node->flags);
+	return 0;
+}
+
+static struct dst_alg_ops alg_linear_ops = {
+	.remap		= dst_linear_remap,
+	.add_node 	= dst_linear_add_node,
+	.del_node 	= dst_linear_del_node,
+	.error		= dst_linear_error,
+	.owner		= THIS_MODULE,
+};
+
+static int __devinit alg_linear_init(void)
+{
+	alg_linear = dst_alloc_alg("alg_linear", &alg_linear_ops);
+	if (!alg_linear)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static void __devexit alg_linear_exit(void)
+{
+	dst_remove_alg(alg_linear);
+}
+
+module_init(alg_linear_init);
+module_exit(alg_linear_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Evgeniy Polyakov <[email protected]>");
+MODULE_DESCRIPTION("Linear distributed algorithm.");
drivers/block/dst/alg_mirror.c new file +1614 -0

1,614 lines not on this page · raw message