ath5k failure with 2.6.24-git14
Hi,
I tried the current git (9ef9dc69d4167276c04590d67ee55de8380bc1ad) and got the following error message from ath5k:
ath5k_pci 0000:02:00.0: registered as 'phy0' ath5k phy0: failed to resume the MAC Chipath5k_pci: probe of 0000:02:00.0 failed with error -5
Here is the lspci -vnn output:
02:00.0 Ethernet controller [0200]: Atheros Communications, Inc. AR5006EG 802.11 b/g Wireless PCI Express Adapter [168c:001c] (rev 01)
Subsystem: Apple Computer Inc. Unknown device [106b:0086]
Flags: fast devsel, IRQ 17
Memory at 90100000 (64-bit, non-prefetchable) [disabled] [size=64K]
Capabilities: [40] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Capabilities: [60] Express Legacy Endpoint, MSI 00
Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [140] Virtual Channel <?>
Kernel modules: ath5k
The same device works with madwifi:
ath_rate_sample: 1.2 (svn r3339)
MadWifi: ath_attach: Switching per-packet transmit power control off
wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
wifi0: ath_announce: Use hw queue 1 for WME_AC_BE traffic
wifi0: ath_announce: Use hw queue 0 for WME_AC_BK traffic
wifi0: ath_announce: Use hw queue 2 for WME_AC_VI traffic
wifi0: ath_announce: Use hw queue 3 for WME_AC_VO traffic
wifi0: ath_announce: Use hw queue 8 for CAB traffic
wifi0: ath_announce: Use hw queue 9 for beaconsath_pci: wifi0: Atheros 5424/2424: mem=0x90100000, irq=17
I can also set the interface up and use iwlist ath0 scan.
Regards,
Tino
(cc linux-wireless)
Quoted 46 lines · On Tue, 5 Feb 2008 23:57:46 +0100 Tino Keitel <[email protected]> wrote:
Hi,
I tried the current git (
9ef9dc69d4167276c04590d67ee55de8380bc1ad) and got the following error message from ath5k:
ath5k_pci0000:02:00.0: registered as 'phy0' ath5k phy0: failed to resume the MAC Chipath5k_pci: probe of 0000:02:00.0 failed with error -5Here is the lspci -vnn output:
02:00.0 Ethernet controller [0200]: Atheros Communications, Inc. AR5006EG 802.11 b/g Wireless PCI Express Adapter [168c:001c] (rev 01)
Subsystem: Apple Computer Inc. Unknown device [106b:0086]
Flags: fast devsel, IRQ 17
Memory at 90100000 (64-bit, non-prefetchable) [disabled] [size=64K]
Capabilities: [40] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Capabilities: [60] Express Legacy Endpoint, MSI 00
Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [140] Virtual Channel <?>
Kernel modules: ath5kThe same device works with madwifi:
ath_rate_sample: 1.2 (svn r3339)
MadWifi:ath_attach: Switching per-packet transmit power control off
wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AESAES_CCMTKIP
wifi0:ath_announce: Use hw queue 1 forWME_AC_BEtraffic
wifi0:ath_announce: Use hw queue 0 forWME_AC_BKtraffic
wifi0:ath_announce: Use hw queue 2 forWME_AC_VItraffic
wifi0:ath_announce: Use hw queue 3 forWME_AC_VOtraffic
wifi0:ath_announce: Use hw queue 8 for CAB traffic
wifi0:ath_announce: Use hw queue 9 for beaconsath_pci: wifi0: Atheros 5424/2424: mem=0x90100000, irq=17I can also set the interface up and use iwlist ath0 scan.
PATCH 1/1 single_chip test
Quoted 8 lines · Tino Keitel
Hi,
I tried the current git (
9ef9dc69d4167276c04590d67ee55de8380bc1ad) and got the following error message from ath5k:
ath5k_pci0000:02:00.0: registered as 'phy0' ath5k phy0: failed to resume the MAC Chipath5k_pci: probe of 0000:02:00.0 failed with error -5
We failed to resume after a hardware reset here for a whole second. Is there any version of ath5k which worked for you (is this a regression)?
Quoted 35 lines
Here is the lspci -vnn output:
02:00.0 Ethernet controller [0200]: Atheros Communications, Inc. AR5006EG 802.11 b/g Wireless PCI Express Adapter [168c:001c] (rev 01)
Subsystem: Apple Computer Inc. Unknown device [106b:0086]
Flags: fast devsel, IRQ 17
Memory at 90100000 (64-bit, non-prefetchable) [disabled] [size=64K]
Capabilities: [40] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Capabilities: [60] Express Legacy Endpoint, MSI 00
Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [140] Virtual Channel <?>
Kernel modules: ath5kThe same device works with madwifi:
ath_rate_sample: 1.2 (svn r3339)
MadWifi:ath_attach: Switching per-packet transmit power control off
wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AESAES_CCMTKIP
wifi0:ath_announce: Use hw queue 1 forWME_AC_BEtraffic
wifi0:ath_announce: Use hw queue 0 forWME_AC_BKtraffic
wifi0:ath_announce: Use hw queue 2 forWME_AC_VItraffic
wifi0:ath_announce: Use hw queue 3 forWME_AC_VOtraffic
wifi0:ath_announce: Use hw queue 8 for CAB traffic
wifi0:ath_announce: Use hw queue 9 for beaconsath_pci: wifi0: Atheros 5424/2424: mem=0x90100000, irq=17
Quoted 1 line
I can also set the interface up and use iwlist ath0 scan.
Hmm, I guess madwif-old-openhal doesn't work either.
I suspect ath5k_hw_nic_wakeup being called before setting ah_single_chip in ath5k_hw_attach. Could you test the attached patch?
--
--- drivers/net/wireless/ath5k/hw.c | 21 ++++++++++----------- 1 files changed, 10 insertions(+), 11 deletions(-)
drivers/net/wireless/ath5k/hw.c +10 -11
@@ -181,11 +181,6 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)else if (ah->ah_version <=AR5K_AR5211 ) ah->ah_proc_rx_desc = ath5k_hw_proc_old_rx_status; -/* Bring device out of sleep and reset it's units */ - ret =ath5k_hw_nic_wakeup (ah,AR5K_INIT_MODE , true); -if (ret) - goto err_free; -/* Get MAC, PHY and RADIO revisions */ srev =ath5k_hw_reg_read (ah,AR5K_SREV ); ah->ah_mac_srev = srev;
@@ -210,12 +205,16 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version) }/* Identify single chip solutions */ -if ((srev <=AR5K_SREV_VER_AR5414 ) && - (srev >=AR5K_SREV_VER_AR2424 )) { - ah->ah_single_chip = true; - }else { - ah->ah_single_chip = false; - } + ah->ah_single_chip = !!(srev >=AR5K_SREV_VER_AR2424 && + srev <=AR5K_SREV_VER_AR5414 ); + +printk (KERN_INFO "SINGLE: %d, srev: %x, phy:\n" , + ah->ah_single_chip, srev, ah->ah_phy_revision); + +/* Bring device out of sleep and reset it's units */ + ret =ath5k_hw_nic_wakeup (ah,AR5K_INIT_MODE , true); +if (ret) + goto err_free;/* Single chip radio */ if (ah->ah_radio_2ghz_revision == ah->ah_radio_5ghz_revision)
Signature · 1 line
1.5.3.8
Re: [RFT 1/1] single_chip test
Review struct ath5k_hw *ath5k_hw_attach(struct ath5k_s=
Quoted 1 line · Jiri Slaby
(quoted diff) +0
-0@@ -210,12 +205,16 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_s=
oftc *sc, u8 mac_version)
Review
Quoted 10 lines
(quoted diff) +0
-0}=20
(quoted diff) +1
-6/* Identify single chip solutions */ - if((srev <=3D AR5K_SREV_VER_AR5414) && - (srev >=3D AR5K_SREV_VER_AR2424)) { - ah->ah_single_chip =3D true; - } else { - ah->ah_single_chip =3D false; - } + ah->ah_single_chip =3D !!(srev >=3D AR5K_SREV_VER_AR2424 &&
^^
This is useless.
Andreas.
--=20
Andreas Schwab, SuSE Labs, [email protected]
SuSE Linux Products GmbH, Maxfeldstra=DFe 5, 90409 N=FCrnberg, Germany PGP key fingerprint =3D 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4= ED5
"And now for something completely different."
-
To unsubscribe from this list: send the line "unsubscribe linux-wireles= s" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [RFT 1/1] single_chip test
Quoted 4 lines · Andreas Schwab
drivers/net/wireless/ath5k/hw.c struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version) · line 208
Quoted 1 line
drivers/net/wireless/ath5k/hw.c +1
-0+ ah->ah_single_chip = !!(srev >= AR5K_SREV_VER_AR2424 &&^^This is useless.
Amended locally, thanks.
Re: [RFT 1/1] single_chip test
In reply to Jiri SlabyQuoted 6 lines · Jiri Slaby
Quoted 5 lines · Tino Keitel
Hi,
I tried the current git (
9ef9dc69d4167276c04590d67ee55de8380bc1ad) and got the following error message from ath5k:
Quoted 6 lines
Quoted 3 lines
ath5k_pci0000:02:00.0: registered as 'phy0' ath5k phy0: failed to resume the MAC Chipath5k_pci: probe of 0000:02:00.0 failed with error -5We failed to resume after a hardware reset here for a whole second. Is there any version of ath5k which worked for you (is this a regression)?
No, this was my first try with ath5k.
Quoted 2 lines
I suspect
ath5k_hw_nic_wakeupbeing called before settingah_single_chipinath5k_hw_attach. Could you test the attached patch?
Thanks, I'll try the patch this evening.
Regards,
Tino
Re: [RFT 1/1] single_chip test
In reply to Jiri SlabyQuoted 6 lines · Jiri Slaby
Quoted 5 lines · Tino Keitel
Hi,
I tried the current git (
9ef9dc69d4167276c04590d67ee55de8380bc1ad) and got the following error message from ath5k:
Quoted 6 lines
Quoted 3 lines
ath5k_pci0000:02:00.0: registered as 'phy0' ath5k phy0: failed to resume the MAC Chipath5k_pci: probe of 0000:02:00.0 failed with error -5We failed to resume after a hardware reset here for a whole second. Is there any version of ath5k which worked for you (is this a regression)?
I cannot speak for Tino, but my ath5k never worked in MacBook -- it failed the same way, and I believe the hardware was the same. My understanding was that it was a known bug with PCIE devices, but I got that out of reading list archives.
Quoted 36 lines
Quoted 36 lines
Here is the lspci -vnn output:
02:00.0 Ethernet controller [0200]: Atheros Communications, Inc. AR5006EG 802.11 b/g Wireless PCI Express Adapter [168c:001c] (rev 01)
Subsystem: Apple Computer Inc. Unknown device [106b:0086]
Flags: fast devsel, IRQ 17
Memory at 90100000 (64-bit, non-prefetchable) [disabled] [size=64K]
Capabilities: [40] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Capabilities: [60] Express Legacy Endpoint, MSI 00
Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [140] Virtual Channel <?>
Kernel modules: ath5kThe same device works with madwifi:
ath_rate_sample: 1.2 (svn r3339)
MadWifi:ath_attach: Switching per-packet transmit power control off
wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AESAES_CCMTKIP
wifi0:ath_announce: Use hw queue 1 forWME_AC_BEtraffic
wifi0:ath_announce: Use hw queue 0 forWME_AC_BKtraffic
wifi0:ath_announce: Use hw queue 2 forWME_AC_VItraffic
wifi0:ath_announce: Use hw queue 3 forWME_AC_VOtraffic
wifi0:ath_announce: Use hw queue 8 for CAB traffic
wifi0:ath_announce: Use hw queue 9 for beaconsath_pci: wifi0: Atheros 5424/2424: mem=0x90100000, irq=17
Quoted 6 lines
Quoted 1 line
I can also set the interface up and use iwlist ath0 scan.
Hmm, I guess madwif-old-openhal doesn't work either.
I suspect
ath5k_hw_nic_wakeupbeing called before settingah_single_chipinath5k_hw_attach. Could you test the attached patch?
I cannot, as my MacBook is now broken.
--
Joseph Fannin
[email protected]
Re: [RFT 1/1] single_chip test
Quoted 7 lines
Quoted 2 lines
We failed to resume after a hardware reset here for a whole second. Is there any version of ath5k which worked for you (is this a regression)?
I cannot speak for Tino, but my ath5k never worked in MacBook -- it failed the same way, and I believe the hardware was the same. My understanding was that it was a known bug with PCIE devices, but I got that out of reading list archives.
Nick Kossifidis and I are in the process of debugging this -- we determined that AR5K_RESET_CTL_PCI hangs the card in hw_nic_wakeup. It doesn't look like there is any general support for 5424 cards yet. Thread is at:
http://marc.info/?l=linux-wireless&m=120179743111458
-Bob
Re: [RFT 1/1] single_chip test
Quoted 11 lines · Bob Copeland
Quoted 7 lines
Quoted 2 lines
We failed to resume after a hardware reset here for a whole second. Is there any version of ath5k which worked for you (is this a regression)?
I cannot speak for Tino, but my ath5k never worked in MacBook -- it failed the same way, and I believe the hardware was the same. My understanding was that it was a known bug with PCIE devices, but I got that out of reading list archives.
Nick Kossifidis and I are in the process of debugging this -- we determined that
AR5K_RESET_CTL_PCIhangs the card inhw_nic_wakeup. It doesn't look like there is any general support for 5424 cards yet.
I tried the patch, and the card was detected. I was able to associate with an WPA2 AP and send/receive some traffic. But after a while the interface broke:
ath0: No ProbeResp from current AP 00:14:bf:16:25:87 - assume out of rangeath5k_hw_get_isr: 0x00000020
...
ath0: failed to set channel 165 (5825 MHz) for scan
ath0: failed to restore operational channel after scan
printk: 19 messages suppressed.
ath5k phy0: calibration timeout (2447MHz)
printk: 1 messages suppressed.
ath5k phy0: calibration timeout (2447MHz)
ath5k phy0: unable to reset hardware: -11
Regards,
Tino
Re: [RFT 1/1] single_chip test
Quoted 10 lines · Tino Keitel
Quoted 9 lines · Bob Copeland
Quoted 6 lines
Quoted 2 lines
We failed to resume after a hardware reset here for a whole second. Is there any version of ath5k which worked for you (is this a regression)?
I cannot speak for Tino, but my ath5k never worked in MacBook -- it failed the same way, and I believe the hardware was the same. My understanding was that it was a known bug with PCIE devices, but I got that out of reading list archives.
Nick Kossifidis and I are in the process of debugging this -- we determined that
AR5K_RESET_CTL_PCIhangs the card inhw_nic_wakeup. It doesn't look like there is any general support for 5424 cards yet.
Seems hold for this case too, as Bob noted.
Quoted 4 lines
I tried the patch, and the card was detected. I was able to associate with an WPA2 AP and send/receive some traffic. But after a while the interface broke:
Quoted 11 lines
ath0: No ProbeResp from current AP 00:14:bf:16:25:87 - assume out of range
ath5k_hw_get_isr:0x00000020
...
ath0: failed to set channel 165 (5825 MHz) for scan
ath0: failed to restore operational channel after scan
printk: 19 messages suppressed.
ath5k phy0: calibration timeout (2447MHz)
printk: 1 messages suppressed.
ath5k phy0: calibration timeout (2447MHz)
ath5k phy0: unable to reset hardware: -11
What's the srev a phy ver printed few lines above this, please?
Re: [RFT 1/1] single_chip test
On Thu, Feb 07, 2008 at 22:51:04 +0100, Jiri Slaby wrote:
[...]
Quoted 1 line
What's the srev a phy ver printed few lines above this, please?
ath5k_pci 0000:02:00.0: registered as 'phy0'
SINGLE: 1, srev: a3, phy:
phy0: Selected rate control algorithm 'pid'
ath5k phy0: Atheros AR5424 chip found (MAC: 0xa3, PHY: 0x61)
Regards,
Tino
Quoted 10 lines · On Tue, 5 Feb 2008 23:57:46 +0100 Tino Keitel <[email protected]> wrote:
Quoted 9 lines
Hi,
I tried the current git (
9ef9dc69d4167276c04590d67ee55de8380bc1ad) and got the following error message from ath5k:
ath5k_pci0000:02:00.0: registered as 'phy0' ath5k phy0: failed to resume the MAC Chipath5k_pci: probe of 0000:02:00.0 failed with error -5
Hi Tino,
I have the same chip and it is currently unsupported by ath5k. See: