Skip to contentSkip to conversation

Both rt2500usb and rt73 claim USB device 148f:2573

DISCUSSION Pavel Roskin 3 participants 4 messages Feb 15, 2008

lore
Share & tools
lore
#0 lore raw

Hello!

My Level One WNC-0301USB v3 has USB ID 148f:2573, which is listed as compatible both in rt2500usb.c and rt73usb.c. It only works with rt73 but not with rt2500usb.

Is this duplication intentional?

I'm looking at the current wireless-2.6/everything

Signature · 2 lines
Regards,
Pavel Roskin
#1 lore raw

Hi Pavel,

Quoted 5 lines · Pavel Roskin

My Level One WNC-0301USB v3 has USB ID 148f:2573, which is listed as compatible both in rt2500usb.c and rt73usb.c. It only works with rt73 but not with rt2500usb.

Is this duplication intentional?

I'm afraid so. That particular manufacturer I believe changed the chipset they were using without updating their USD device ID's. We have seen this a few times now and the only solution we have been able to provide is to give the users instructions for blacklisting the incorrect driver.

I believe this has been discussed on this list previously.

Regards,
Mark Wallis
rt2x00 Driver Team
[email protected]
http://www.markwallis.id.au

#2 lore raw

Quoting Mark Wallis <[email protected]>:

Quoted 10 lines

Hi Pavel,

Quoted 5 lines · Pavel Roskin

My Level One WNC-0301USB v3 has USB ID 148f:2573, which is listed as compatible both in rt2500usb.c and rt73usb.c. It only works with rt73 but not with rt2500usb.

Is this duplication intentional?

Quoted 7 lines

I'm afraid so. That particular manufacturer I believe changed the chipset they were using without updating their USD device ID's. We have seen this a few times now and the only solution we have been able to provide is to give the users instructions for blacklisting the incorrect driver.

I believe this has been discussed on this list previously.

Thanks and sorry for the noise.

Signature · 2 lines
Regards,
Pavel Roskin
#3 lore raw
Quoted 18 lines · Pavel Roskin

Quoting Mark Wallis <[email protected]>:

Quoted 16 lines

Hi Pavel,

Quoted 5 lines · Pavel Roskin

My Level One WNC-0301USB v3 has USB ID 148f:2573, which is listed as compatible both in rt2500usb.c and rt73usb.c. It only works with rt73 but not with rt2500usb.

Is this duplication intentional?

I'm afraid so. That particular manufacturer I believe changed the chipset they were using without updating their USD device ID's. We have seen this a few times now and the only solution we have been able to provide is to give the users instructions for blacklisting the incorrect driver.

Quoted 3 lines
Quoted 1 line

I believe this has been discussed on this list previously.

Thanks and sorry for the noise.

P.S. your lucky it is only listed in 2 drivers. Some USB ID's (mostly coming from Linksys) are known to have 4 different drivers variating from Broadcom, Prism and Ralink. ;)

Ivo