Skip to contentSkip to conversation

: More 5706S link down workaround.

PATCH Applied Michael Chan 2 participants 2 messages Feb 22, 2008 – Feb 24, 2008

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/3 : More 5706S link down workaround.

[BNX2]: More 5706S link down workaround.

The previous patches to workaround the 5706S on an HP blade were not sufficient. The link state still does not change properly in some cases. This patch adds polling to make it completely reliable.

drivers/net/bnx2.c +17 -15
index 471c7f3..2fa2580 100644
@@ -1273,14 +1273,20 @@ bnx2_set_link(struct bnx2 *bp)
 
 	if ((bp->phy_flags & BNX2_PHY_FLAG_SERDES) &&
 	    (CHIP_NUM(bp) == CHIP_NUM_5706)) {
-		u32 val;
+		u32 val, an_dbg;
 
 		if (bp->phy_flags & BNX2_PHY_FLAG_FORCED_DOWN) {
 			bnx2_5706s_force_link_dn(bp, 0);
 			bp->phy_flags &= ~BNX2_PHY_FLAG_FORCED_DOWN;
 		}
 		val = REG_RD(bp, BNX2_EMAC_STATUS);
-		if (val & BNX2_EMAC_STATUS_LINK)
+
+		bnx2_write_phy(bp, MII_BNX2_MISC_SHADOW, MISC_SHDW_AN_DBG);
+		bnx2_read_phy(bp, MII_BNX2_MISC_SHADOW, &an_dbg);
+		bnx2_read_phy(bp, MII_BNX2_MISC_SHADOW, &an_dbg);
+
+		if ((val & BNX2_EMAC_STATUS_LINK) &&
+		    !(an_dbg & MISC_SHDW_AN_DBG_NOSYNC))
 			bmsr |= BMSR_LSTATUS;
 		else
 			bmsr &= ~BMSR_LSTATUS;
@@ -5390,13 +5396,6 @@ bnx2_5706_serdes_timer(struct bnx2 *bp)
 	int check_link = 1;
 
 	spin_lock(&bp->phy_lock);
-	if (bp->phy_flags & BNX2_PHY_FLAG_FORCED_DOWN) {
-		bnx2_5706s_force_link_dn(bp, 0);
-		bp->phy_flags &= ~BNX2_PHY_FLAG_FORCED_DOWN;
-		spin_unlock(&bp->phy_lock);
-		return;
-	}
-
 	if (bp->serdes_an_pending) {
 		bp->serdes_an_pending--;
 		check_link = 0;
@@ -5420,7 +5419,6 @@ bnx2_5706_serdes_timer(struct bnx2 *bp)
 		 (bp->phy_flags & BNX2_PHY_FLAG_PARALLEL_DETECT)) {
 		u32 phy2;
 
-		check_link = 0;
 		bnx2_write_phy(bp, 0x17, 0x0f01);
 		bnx2_read_phy(bp, 0x15, &phy2);
 		if (phy2 & 0x20) {
@@ -5435,17 +5433,21 @@ bnx2_5706_serdes_timer(struct bnx2 *bp)
 	} else
 		bp->current_interval = bp->timer_interval;
 
-	if (bp->link_up && (bp->autoneg & AUTONEG_SPEED) && check_link) {
+	if (check_link) {
 		u32 val;
 
 		bnx2_write_phy(bp, MII_BNX2_MISC_SHADOW, MISC_SHDW_AN_DBG);
 		bnx2_read_phy(bp, MII_BNX2_MISC_SHADOW, &val);
 		bnx2_read_phy(bp, MII_BNX2_MISC_SHADOW, &val);
 
-		if (val & MISC_SHDW_AN_DBG_NOSYNC) {
-			bnx2_5706s_force_link_dn(bp, 1);
-			bp->phy_flags |= BNX2_PHY_FLAG_FORCED_DOWN;
-		}
+		if (bp->link_up && (val & MISC_SHDW_AN_DBG_NOSYNC)) {
+			if (!(bp->phy_flags & BNX2_PHY_FLAG_FORCED_DOWN)) {
+				bnx2_5706s_force_link_dn(bp, 1);
+				bp->phy_flags |= BNX2_PHY_FLAG_FORCED_DOWN;
+			} else
+				bnx2_set_link(bp);
+		} else if (!bp->link_up && !(val & MISC_SHDW_AN_DBG_NOSYNC))
+			bnx2_set_link(bp);
 	}
 	spin_unlock(&bp->phy_lock);
 }
maintainer Applied
#1 lore raw

From: "Michael Chan" <[email protected]>
Date: Fri, 22 Feb 2008 11:49:38 -0800

Quoted 7 lines

[BNX2]: More 5706S link down workaround.

The previous patches to workaround the 5706S on an HP blade were not sufficient. The link state still does not change properly in some cases. This patch adds polling to make it completely reliable.

Applied, thanks.