Add AMCC Canyonlands 460EX eval board support to platforms/44x
Subsystems (2)
PATCH v2 2/5 Add AMCC Canyonlands 460EX eval board support to platforms/44x
Canyonlands is the AMCC 460EX eval board, featuring nearly all of the 460EX interfaces:
- 1 * PCI (max 66MHz), 2 * PCIe (one 4-lane, one 1-lane)
- 2 * GBit Ethernet with TCP/IP acceleration
- USB 2.0 Host/Device OTG and Host interface
- SATA port
Signed-off-by Stefan Roese <[email protected]>
--- arch/powerpc/platforms/44x/Kconfig | 18 ++++++++ arch/powerpc/platforms/44x/Makefile | 1 + arch/powerpc/platforms/44x/canyonlands.c | 64 ++++++++++++++++++++++++++++++ 3 files changed, 83 insertions(+), 0 deletions(-) create mode 100644 arch/powerpc/platforms/44x/canyonlands.c
arch/powerpc/platforms/44x/Kconfig +18 -0
@@ -67,6 +67,16 @@ config WARP See http://www.pikatechnologies.com/ and follow the "PIKA for Computer Telephony Developers" link for more information. +config CANYONLANDS + bool "Canyonlands" + depends on 44x + default n + select 460EX + select PCI + select PPC4xx_PCI_EXPRESS + help + This option enables support for the AMCC PPC460EX evaluation board. + #config LUAN # bool "Luan" # depends on 44x
@@ -122,6 +132,14 @@ config 440SPe select IBM_NEW_EMAC_EMAC4 bool +config 460EX + bool + select PPC_FPU + select IBM_NEW_EMAC_EMAC4 + select IBM_NEW_EMAC_RGMII + select IBM_NEW_EMAC_ZMII + select IBM_NEW_EMAC_TAH + # 44x errata/workaround config symbols, selected by the CPU models above config IBM440EP_ERR42 bool
arch/powerpc/platforms/44x/Makefile +1 -0
@@ -7,3 +7,4 @@ obj-$(CONFIG_KATMAI) += katmai.o obj-$(CONFIG_RAINIER) += rainier.o obj-$(CONFIG_WARP) += warp.o obj-$(CONFIG_WARP) += warp-nand.o +obj-$(CONFIG_CANYONLANDS) += canyonlands.o
arch/powerpc/platforms/44x/canyonlands.c new file +64 -0
64 lines not on this page · raw message
Signature · 1 line
1.5.4.2