maple: fix device detection
PATCH 1/1 maple: fix device detection
The maple bus driver that went into the kernel mainline in September 2007 contained some bugs which were revealed by the update of the kobj code for the current release series. Unfortunately those bugs also helped ensure maple devices were properly detected. This patch (against the current git) now ensures that devices are properly detected again.
(A previous attempt to fix this by delaying initialisation only partially fixed this - as became apparent when the bus was fully loaded)
---
b/drivers/sh/maple/maple.c renamed from a/drivers/sh/maple/maple.c +42 -23
@@ -1,7 +1,7 @@/* * Core maple bus functionality * -* Copyright (C) 2007 Adrian McMenamin +* Copyright (C) 2007, 2008 Adrian McMenamin * * Based on 2.4 code by: *
@@ -18,7 +18,6 @@#include <linux/init.h> #include <linux/kernel.h> #include <linux/device.h> -#include <linux/module.h> #include <linux/interrupt.h> #include <linux/list.h> #include <linux/io.h>
@@ -54,7 +53,7 @@static int subdevice_map[MAPLE_PORTS ];static unsigned long *maple_sendbuf, *maple_sendptr, *maple_lastptr;static unsigned long maple_pnp_time; -static int started, scanning, liststatus, realscan; +static int started, scanning, liststatus, fullscan;static struct kmem_cache *maple_queue_cache;struct maple_device_specify {
@@ -62,6 +61,9 @@int unit; }; +static bool checked[4 ]; +static struct maple_device *baseunits[4 ]; +/** * maple_driver_register - register a device driver * automatically makes the driver bus a maple bus
@@ -309,11 +311,9 @@else break ; -if (realscan) { -printk (KERN_INFO "Maple device detected: %s\n" , - mdev->product_name); -printk (KERN_INFO "Maple device: %s\n" , mdev->product_licence); - } +printk (KERN_INFO "Maple device detected: %s\n" , + mdev->product_name); +printk (KERN_INFO "Maple device: %s\n" , mdev->product_licence); function =be32_to_cpu (mdev->devinfo.function);
@@ -323,10 +323,9 @@ mdev->driver = &maple_dummy_driver;sprintf (mdev->dev.bus_id,"%d:0.port" , mdev->port); }else { -if (realscan) -printk (KERN_INFO -"Maple bus at (%d, %d): Function 0x%lX\n" , - mdev->port, mdev->unit, function); +printk (KERN_INFO +"Maple bus at (%d, %d): Function 0x%lX\n" , + mdev->port, mdev->unit, function); matched bus_for_each_drv(&maple_bus_type, NULL, mdev,
@@ -334,9 +333,8 @@if (matched =0 ) {/* Driver does not exist yet */ -if (realscan) -printk (KERN_INFO -"No maple driver found.\n" ); +printk (KERN_INFO +"No maple driver found.\n" ); mdev->driver = &maple_dummy_driver; } sprintf(mdev->dev.bus_id, "%d:0%d.%lX", mdev->port,
@@ -472,9 +470,12 @@maple_detach_driver (mdev);return ; } -if (!started) { -printk (KERN_INFO "No maple devices attached to port %d\n" , - mdev->port); +if (!started || !fullscan) { +if (checked[mdev->port] = false) { + checked[mdev->port] = true; +printk (KERN_INFO "No maple devices attached" +" to port %d\n" , mdev->port); + }return ; }maple_clean_submap (mdev);
@@ -485,8 +486,14 @@ char *recvbuf) {char submask; -if ((!started) || (scanning =2 )) { -maple_attach_driver (mdev); +if (!started || (scanning =2 ) || !fullscan) { +if ((mdev->unit =0 ) && (checked[mdev->port] = false)) { + checked[mdev->port] = true; +maple_attach_driver (mdev); + }else { +if (mdev->unit !=0 ) +maple_attach_driver (mdev); + }return ; }if (mdev->unit =0 ) {
@@ -505,6 +512,7 @@struct maple_device *dev;char *recvbuf;enum maple_code code; +int i;if (!maple_dma_done ())return ;
@@ -557,6 +565,19 @@ }else scanning =0 ; +if (!fullscan) { + fullscan =1 ; +for (i =0 ; i <MAPLE_PORTS ; i++) { +if (checked[i] = false) { + fullscan =0 ; + dev = baseunits[i]; + dev->mq->command +MAPLE_COMMAND_DEVINFO ; + dev->mq->length =0 ; +maple_add_packet (dev->mq); + } + } + }if (started =0 ) started =1 ; }
@@ -694,7 +715,9 @@/* setup maple ports */ for (i =0 ; i <MAPLE_PORTS ; i++) { + checked[i] = false; mdev[i] =maple_alloc_dev (i,0 ); + baseunits[i] = mdev[i];if (!mdev[i]) {while (i-- >0 )maple_free_dev (mdev[i]);
@@ -703,12 +726,9 @@ mdev[i]->mq->command =MAPLE_COMMAND_DEVINFO ; mdev[i]->mq->length =0 ;maple_add_packet (mdev[i]->mq); -/* delay aids hardware detection */ -mdelay (5 ); subdevice_map[i] =0 ; } - realscan =1 ;/* setup maplebus hardware */ maplebus_dma_reset ();/* initial detection */
Quoted 2 lines · Adrian McMenamin
The maple bus driver that went into the kernel mainline in September 2007 contained some bugs which were revealed by the update of the kobj code for the current release series. Unfortunately those bugs also helped ensure maple devices were properly detected. This patch (against the current git) now ensures that devices are properly detected again.
Further testing has shown this has introduced another bug, this time limiting the effectiveness of subdevice detection. Please ignore this while I work on a fix.
Quoted 8 lines · Adrian McMenamin
Quoted 2 lines · Adrian McMenamin
The maple bus driver that went into the kernel mainline in September 2007 contained some bugs which were revealed by the update of the kobj code for the current release series. Unfortunately those bugs also helped ensure maple devices were properly detected. This patch (against the current git) now ensures that devices are properly detected again.
Further testing has shown this has introduced another bug, this time limiting the effectiveness of subdevice detection. Please ignore this while I work on a fix.
Sorry for the confusion, in fact there is nothing wrong with this code (ie it should be applied), the error was in the driver for the Dreamcast controller (the device, in general, into which the subdevices are plugged in and out).
I will post a fix for that.
Sorry again.
Quoted 14 lines · Adrian McMenamin
Quoted 9 lines · Adrian McMenamin
Quoted 7 lines · Adrian McMenamin
The maple bus driver that went into the kernel mainline in September 2007 contained some bugs which were revealed by the update of the kobj code for the current release series. Unfortunately those bugs also helped ensure maple devices were properly detected. This patch (against the current git) now ensures that devices are properly detected again.
Quoted 4 lines
Further testing has shown this has introduced another bug, this time limiting the effectiveness of subdevice detection. Please ignore this while I work on a fix.
Quoted 9 lines
Sorry for the confusion, in fact there is nothing wrong with this code (ie it should be applied), the error was in the driver for the Dreamcast controller (the device, in general, into which the subdevices are plugged in and out).
I will post a fix for that.
Sorry again.
So what exactly is supposed to be applied here?
Quoted 20 lines · Paul Mundt
Quoted 19 lines · Adrian McMenamin
Quoted 9 lines · Adrian McMenamin
Quoted 7 lines · Adrian McMenamin
The maple bus driver that went into the kernel mainline in September 2007 contained some bugs which were revealed by the update of the kobj code for the current release series. Unfortunately those bugs also helped ensure maple devices were properly detected. This patch (against the current git) now ensures that devices are properly detected again.
Quoted 4 lines
Further testing has shown this has introduced another bug, this time limiting the effectiveness of subdevice detection. Please ignore this while I work on a fix.
Sorry for the confusion, in fact there is nothing wrong with this code (ie it should be applied), the error was in the driver for the Dreamcast controller (the device, in general, into which the subdevices are plugged in and out).
Quoted 5 lines
Quoted 4 lines
I will post a fix for that.
Sorry again.
So what exactly is supposed to be applied here?
The patch at the start of this thread - ie
http://lkml.org/lkml/2008/2/24/125 - this should really go in now as it fixes a problem with current code.
In addition there are two patch sets to add new device support:
http://lkml.org/lkml/2008/2/24/211 - maple controller
http://lkml.org/lkml/2008/2/24/121 (thread) - maple mouse
Quoted 23 lines · Adrian McMenamin
Quoted 22 lines · Paul Mundt
Quoted 21 lines · Adrian McMenamin
Quoted 9 lines · Adrian McMenamin
Quoted 7 lines · Adrian McMenamin
The maple bus driver that went into the kernel mainline in September 2007 contained some bugs which were revealed by the update of the kobj code for the current release series. Unfortunately those bugs also helped ensure maple devices were properly detected. This patch (against the current git) now ensures that devices are properly detected again.
Quoted 4 lines
Further testing has shown this has introduced another bug, this time limiting the effectiveness of subdevice detection. Please ignore this while I work on a fix.
Sorry for the confusion, in fact there is nothing wrong with this code (ie it should be applied), the error was in the driver for the Dreamcast controller (the device, in general, into which the subdevices are plugged in and out).
I will post a fix for that.
Quoted 8 lines
Quoted 3 lines
Quoted 2 lines
Sorry again.
So what exactly is supposed to be applied here?
The patch at the start of this thread - ie
http://lkml.org/lkml/2008/2/24/125 - this should really go in now as it fixes a problem with current code.
Ok, that's applied. Note that the original body was horribly word wrapped, and your patch was not in -p1 format (while others in the series are, for reasons that aren't entirely obvious).
Quoted 6 lines
In addition there are two patch sets to add new device support:
http://lkml.org/lkml/2008/2/24/211 - maple controller
http://lkml.org/lkml/2008/2/24/121 (thread) - maple mouse
This is not 2.6.25 material. Once you have Acked-by's from the input folks, I'll queue these up in my 2.6.26 tree. The bus unplug thing is rather unusual, I don't know if Greg has any comments on that or not.