Skip to contentSkip to conversation

pasemi_mac updates for 2.6.26

PATCH In review Olof Johansson 4 participants 15 messages Feb 21, 2008 – Mar 6, 2008

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

cover pasemi_mac updates for 2.6.26

Here's a set of updates for pasemi_mac for 2.6.26. Some of them touch the dma_lib in the platform code as well, but it's easier if it's all merged through netdev to avoid dependencies.

Major highlights are jumbo frame support and ethtool basics, the rest is mostly minor plumbing around it.

#1 lore raw

PATCH 1/6 pasemi_mac: Move RX/TX section enablement to dma_lib

Also stop both rx and tx sections before changing the configuration of the dma device during init.

arch/powerpc/platforms/pasemi/dma_lib.c +24 -0
Index: k.org/arch/powerpc/platforms/pasemi/dma_lib.c
===================================================================
@@ -478,6 +478,30 @@ int pasemi_dma_init(void)
 	for (i = 0; i < MAX_RXCH; i++)
 		__set_bit(i, rxch_free);
 
+	i = 1000;
+	pasemi_write_dma_reg(PAS_DMA_COM_RXCMD, 0);
+	while ((i > 0) && (pasemi_read_dma_reg(PAS_DMA_COM_RXSTA) & 1))
+		i--;
+	if (i < 0)
+		printk(KERN_INFO "Warning: Could not disable RX section\n");
+
+	i = 1000;
+	pasemi_write_dma_reg(PAS_DMA_COM_TXCMD, 0);
+	while ((i > 0) && (pasemi_read_dma_reg(PAS_DMA_COM_TXSTA) & 1))
+		i--;
+	if (i < 0)
+		printk(KERN_INFO "Warning: Could not disable TX section\n");
+
+	/* setup resource allocations for the different DMA sections */
+	tmp = pasemi_read_dma_reg(PAS_DMA_COM_CFG);
+	pasemi_write_dma_reg(PAS_DMA_COM_CFG, tmp | 0x18000000);
+
+	/* enable tx section */
+	pasemi_write_dma_reg(PAS_DMA_COM_TXCMD, PAS_DMA_COM_TXCMD_EN);
+
+	/* enable rx section */
+	pasemi_write_dma_reg(PAS_DMA_COM_RXCMD, PAS_DMA_COM_RXCMD_EN);
+
 	printk(KERN_INFO "PA Semi PWRficient DMA library initialized "
 		"(%d tx, %d rx channels)\n", num_txch, num_rxch);
 
drivers/net/pasemi_mac.c +0 -6
Index: k.org/drivers/net/pasemi_mac.c
===================================================================
@@ -1043,12 +1043,6 @@ static int pasemi_mac_open(struct net_de
 	unsigned int flags;
 	int ret;
 
-	/* enable rx section */
-	write_dma_reg(PAS_DMA_COM_RXCMD, PAS_DMA_COM_RXCMD_EN);
-
-	/* enable tx section */
-	write_dma_reg(PAS_DMA_COM_TXCMD, PAS_DMA_COM_TXCMD_EN);
-
 	flags = PAS_MAC_CFG_TXP_FCE | PAS_MAC_CFG_TXP_FPC(3) |
 		PAS_MAC_CFG_TXP_SL(3) | PAS_MAC_CFG_TXP_COB(0xf) |
 		PAS_MAC_CFG_TXP_TIFT(8) | PAS_MAC_CFG_TXP_TIFG(12);
include/asm-powerpc/pasemi_dma.h +6 -1
Index: k.org/include/asm-powerpc/pasemi_dma.h
===================================================================
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2006 PA Semi, Inc
+ * Copyright (C) 2006-2008 PA Semi, Inc
  *
  * Hardware register layout and descriptor formats for the on-board
  * DMA engine on PA Semi PWRficient. Used by ethernet, function and security
@@ -40,6 +40,11 @@ enum {
 	PAS_DMA_COM_TXSTA = 0x104,	/* Transmit Status Register   */
 	PAS_DMA_COM_RXCMD = 0x108,	/* Receive Command Register   */
 	PAS_DMA_COM_RXSTA = 0x10c,	/* Receive Status Register    */
+	PAS_DMA_COM_CFG   = 0x114,	/* Common config reg	      */
+	PAS_DMA_TXF_SFLG0 = 0x140,	/* Set flags                  */
+	PAS_DMA_TXF_SFLG1 = 0x144,	/* Set flags                  */
+	PAS_DMA_TXF_CFLG0 = 0x148,	/* Set flags                  */
+	PAS_DMA_TXF_CFLG1 = 0x14c,	/* Set flags                  */
 };
 
 
#2 lore raw

Re: [patch 1/6] pasemi_mac: Move RX/TX section enablement to dma_lib

Quoted 15 lines · Olof Johansson

plain text document attachment (in-progress)
Also stop both rx and tx sections before changing the configuration of the dma device during init.

Index: k.org/arch/powerpc/platforms/pasemi/dma_lib.c
===================================================================

arch/powerpc/platforms/pasemi/dma_lib.c +1 -0
@@ -478,6 +478,30 @@ int pasemi_dma_init(void)
 	for (i = 0; i < MAX_RXCH; i++)
 		__set_bit(i, rxch_free);
 
+	i = 1000;

arch/powerpc/platforms/pasemi/dma_lib.c int pasemi_dma_init(void) · line 491

Quoted 10 lines
arch/powerpc/platforms/pasemi/dma_lib.c +10 -0
+	pasemi_write_dma_reg(PAS_DMA_COM_RXCMD, 0);
+	while ((i > 0) && (pasemi_read_dma_reg(PAS_DMA_COM_RXSTA) & 1))
+		i--;
+	if (i < 0)
+		printk(KERN_INFO "Warning: Could not disable RX section\n");
+
+	i = 1000;
+	pasemi_write_dma_reg(PAS_DMA_COM_TXCMD, 0);
+	while ((i > 0) && (pasemi_read_dma_reg(PAS_DMA_COM_TXSTA) & 1))
+		i--;

This kind of caught my eye, is it still going to work when the next core is twice as fast?

cheers

Signature · 8 lines
Michael Ellerman
OzLabs, IBM Australia Development Lab

wwweb: http://michael.ellerman.id.au
phone: +61 2 6212 1183 (tie line 70 21183)

We do not inherit the earth from our ancestors,
we borrow it from our children. - S.M.A.R.T Person
#3 lore raw

Re: [patch 1/6] pasemi_mac: Move RX/TX section enablement to dma_lib

Hi,

Quoted 15 lines · Michael Ellerman

arch/powerpc/platforms/pasemi/dma_lib.c int pasemi_dma_init(void) · line 491

Quoted 11 lines · Olof Johansson
arch/powerpc/platforms/pasemi/dma_lib.c +11 -0
+	i = 1000;
+	pasemi_write_dma_reg(PAS_DMA_COM_RXCMD, 0);
+	while ((i > 0) && (pasemi_read_dma_reg(PAS_DMA_COM_RXSTA) & 1))
+		i--;
+	if (i < 0)
+		printk(KERN_INFO "Warning: Could not disable RX section\n");
+
+	i = 1000;
+	pasemi_write_dma_reg(PAS_DMA_COM_TXCMD, 0);
+	while ((i > 0) && (pasemi_read_dma_reg(PAS_DMA_COM_TXSTA) & 1))
+		i--;

This kind of caught my eye, is it still going to work when the next core is twice as fast?

Actually, I added the variable right before posting, I used to have an infinite loop there while testing the patch. I've never seen it do more than a few rounds, so I'm not that worried.

We already have a similar loop in the channel shutdown code, but it runs a bit longer. I might bring that over instead. Thanks for pointing it out.

-Olof

#4 lore raw

Re: [Pasemi-linux] [patch 1/6] pasemi_mac: Move RX/TX section enablement to dma_lib

Quoted 19 lines · Olof Johansson

Hi,

Quoted 15 lines · Michael Ellerman

Review

Quoted 11 lines · Olof Johansson
(quoted diff) +11 -0
+	i = 1000;
+	pasemi_write_dma_reg(PAS_DMA_COM_RXCMD, 0);
+	while ((i > 0) && (pasemi_read_dma_reg(PAS_DMA_COM_RXSTA) & 1))
+		i--;
+	if (i < 0)
+		printk(KERN_INFO "Warning: Could not disable RX section\n");
+
+	i = 1000;
+	pasemi_write_dma_reg(PAS_DMA_COM_TXCMD, 0);
+	while ((i > 0) && (pasemi_read_dma_reg(PAS_DMA_COM_TXSTA) & 1))
+		i--;

This kind of caught my eye, is it still going to work when the next core is twice as fast?

Quoted 7 lines

Actually, I added the variable right before posting, I used to have an infinite loop there while testing the patch. I've never seen it do more than a few rounds, so I'm not that worried.

We already have a similar loop in the channel shutdown code, but it runs a bit longer. I might bring that over instead. Thanks for pointing it out.

FYI; I've commited in this change, rest of the patch is identical.

arch/powerpc/platforms/pasemi/dma_lib.c +19 -0
index c529d8d..48cb7c9 100644
@@ -17,6 +17,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
+#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/pci.h>
@@ -410,6 +411,7 @@ int pasemi_dma_init(void)
 	struct resource res;
 	struct device_node *dn;
 	int i, intf, err = 0;
+	unsigned long timeout;
 	u32 tmp;
 
 	if (!machine_is(pasemi))
@@ -478,6 +480,34 @@ int pasemi_dma_init(void)
 	for (i = 0; i < MAX_RXCH; i++)
 		__set_bit(i, rxch_free);
 
+	timeout = jiffies + HZ;
+	pasemi_write_dma_reg(PAS_DMA_COM_RXCMD, 0);
+	while (pasemi_read_dma_reg(PAS_DMA_COM_RXSTA) & 1) {
+		if (time_after(jiffies, timeout)) {
+			pr_warning("Warning: Could not disable RX section\n");
+			break;
+		}
+	}
+
+	timeout = jiffies + HZ;
+	pasemi_write_dma_reg(PAS_DMA_COM_TXCMD, 0);
+	while (pasemi_read_dma_reg(PAS_DMA_COM_TXSTA) & 1) {
+		if (time_after(jiffies, timeout)) {
+			pr_warning("Warning: Could not disable TX section\n");
+			break;
+		}
+	}
#5 lore raw

Re: [Pasemi-linux] [patch 1/6] pasemi_mac: Move RX/TX section enablement to dma_lib

Quoted 53 lines · Olof Johansson
Quoted 18 lines · Olof Johansson

Hi,

Quoted 15 lines · Michael Ellerman

Review

Quoted 11 lines · Olof Johansson
(quoted diff) +11 -0
+	i = 1000;
+	pasemi_write_dma_reg(PAS_DMA_COM_RXCMD, 0);
+	while ((i > 0) && (pasemi_read_dma_reg(PAS_DMA_COM_RXSTA) & 1))
+		i--;
+	if (i < 0)
+		printk(KERN_INFO "Warning: Could not disable RX section\n");
+
+	i = 1000;
+	pasemi_write_dma_reg(PAS_DMA_COM_TXCMD, 0);
+	while ((i > 0) && (pasemi_read_dma_reg(PAS_DMA_COM_TXSTA) & 1))
+		i--;

This kind of caught my eye, is it still going to work when the next core is twice as fast?

FYI; I've commited in this change, rest of the patch is identical.

arch/powerpc/platforms/pasemi/dma_lib.c +9 -0
index c529d8d..48cb7c9 100644
@@ -17,6 +17,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
+#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/pci.h>
@@ -410,6 +411,7 @@ int pasemi_dma_init(void)
 	struct resource res;
 	struct device_node *dn;
 	int i, intf, err = 0;
+	unsigned long timeout;
 	u32 tmp;
 
 	if (!machine_is(pasemi))
@@ -478,6 +480,34 @@ int pasemi_dma_init(void)
 	for (i = 0; i < MAX_RXCH; i++)
 		__set_bit(i, rxch_free);
 
+	timeout = jiffies + HZ;
+	pasemi_write_dma_reg(PAS_DMA_COM_RXCMD, 0);
+	while (pasemi_read_dma_reg(PAS_DMA_COM_RXSTA) & 1) {
+		if (time_after(jiffies, timeout)) {
+			pr_warning("Warning: Could not disable RX section\n");
+			break;
+		}

arch/powerpc/platforms/pasemi/dma_lib.c int pasemi_dma_init(void) · line 499

Quoted 10 lines
arch/powerpc/platforms/pasemi/dma_lib.c +10 -0
+	}
+
+	timeout = jiffies + HZ;
+	pasemi_write_dma_reg(PAS_DMA_COM_TXCMD, 0);
+	while (pasemi_read_dma_reg(PAS_DMA_COM_TXSTA) & 1) {
+		if (time_after(jiffies, timeout)) {
+			pr_warning("Warning: Could not disable TX section\n");
+			break;
+		}
+	}

I like that a lot better :)

Ooo, someone beat me to adding pr_warning() - nice.

cheers

Signature · 8 lines
Michael Ellerman
OzLabs, IBM Australia Development Lab

wwweb: http://michael.ellerman.id.au
phone: +61 2 6212 1183 (tie line 70 21183)

We do not inherit the earth from our ancestors,
we borrow it from our children. - S.M.A.R.T Person
#6 lore raw

PATCH 2/6 pasemi: Add flag management functions to dma_lib

In reply to Olof Johansson

Add functions to manage the channel syncronization flags to dma_lib

arch/powerpc/platforms/pasemi/dma_lib.c +74 -0
Index: k.org/arch/powerpc/platforms/pasemi/dma_lib.c
===================================================================
@@ -26,6 +26,7 @@
 
 #define MAX_TXCH 64
 #define MAX_RXCH 64
+#define MAX_FLAGS 64
 
 static struct pasdma_status *dma_status;
 
@@ -43,6 +44,7 @@ static struct pci_dev *dma_pdev;
 
 static DECLARE_BITMAP(txch_free, MAX_TXCH);
 static DECLARE_BITMAP(rxch_free, MAX_RXCH);
+static DECLARE_BITMAP(flags_free, MAX_FLAGS);
 
 /* pasemi_read_iob_reg - read IOB register
  * @reg: Register to read (offset into PCI CFG space)
@@ -373,6 +375,71 @@ void pasemi_dma_free_buf(struct pasemi_d
 }
 EXPORT_SYMBOL(pasemi_dma_free_buf);
 
+/* pasemi_dma_alloc_flag - Allocate a flag (event) for channel syncronization
+ *
+ * Allocates a flag for use with channel syncronization (event descriptors).
+ * Returns allocated flag (0-63), < 0 on error.
+ */
+int pasemi_dma_alloc_flag(void)
+{
+	int bit;
+
+retry:
+	bit = find_next_bit(flags_free, MAX_FLAGS, 0);
+	if (bit >= MAX_FLAGS)
+		return -ENOSPC;
+	if (!test_and_clear_bit(bit, flags_free))
+		goto retry;
+
+	return bit;
+}
+EXPORT_SYMBOL(pasemi_dma_alloc_flag);
+
+
+/* pasemi_dma_free_flag - Deallocates a flag (event)
+ * @flag: Flag number to deallocate
+ *
+ * Frees up a flag so it can be reused for other purposes.
+ */
+void pasemi_dma_free_flag(int flag)
+{
+	BUG_ON(test_bit(flag, flags_free));
+	BUG_ON(flag >= MAX_FLAGS);
+	set_bit(flag, flags_free);
+}
+EXPORT_SYMBOL(pasemi_dma_free_flag);
+
+
+/* pasemi_dma_set_flag - Sets a flag (event) to 1
+ * @flag: Flag number to set active
+ *
+ * Sets the flag provided to 1.
+ */
+void pasemi_dma_set_flag(int flag)
+{
+	BUG_ON(flag >= MAX_FLAGS);
+	if (flag < 32)
+		pasemi_write_dma_reg(PAS_DMA_TXF_SFLG0, 1 << flag);
+	else
+		pasemi_write_dma_reg(PAS_DMA_TXF_SFLG1, 1 << flag);
+}
+EXPORT_SYMBOL(pasemi_dma_set_flag);
+
+/* pasemi_dma_clear_flag - Sets a flag (event) to 0
+ * @flag: Flag number to set inactive
+ *
+ * Sets the flag provided to 0.
+ */
+void pasemi_dma_clear_flag(int flag)
+{
+	BUG_ON(flag >= MAX_FLAGS);
+	if (flag < 32)
+		pasemi_write_dma_reg(PAS_DMA_TXF_CFLG0, 1 << flag);
+	else
+		pasemi_write_dma_reg(PAS_DMA_TXF_CFLG1, 1 << flag);
+}
+EXPORT_SYMBOL(pasemi_dma_clear_flag);
+
 static void *map_onedev(struct pci_dev *p, int index)
 {
 	struct device_node *dn;
@@ -502,6 +569,13 @@ int pasemi_dma_init(void)
 	/* enable rx section */
 	pasemi_write_dma_reg(PAS_DMA_COM_RXCMD, PAS_DMA_COM_RXCMD_EN);
 
+	for (i = 0; i < MAX_FLAGS; i++)
+		__set_bit(i, flags_free);
+
+	/* clear all status flags */
+	pasemi_write_dma_reg(PAS_DMA_TXF_CFLG0, 0xffffffff);
+	pasemi_write_dma_reg(PAS_DMA_TXF_CFLG1, 0xffffffff);
+
 	printk(KERN_INFO "PA Semi PWRficient DMA library initialized "
 		"(%d tx, %d rx channels)\n", num_txch, num_rxch);
 
include/asm-powerpc/pasemi_dma.h +6 -0
Index: k.org/include/asm-powerpc/pasemi_dma.h
===================================================================
@@ -466,6 +466,12 @@ extern void *pasemi_dma_alloc_buf(struct
 extern void pasemi_dma_free_buf(struct pasemi_dmachan *chan, int size,
 				dma_addr_t *handle);
 
+/* Routines to allocate flags (events) for channel syncronization */
+extern int  pasemi_dma_alloc_flag(void);
+extern void pasemi_dma_free_flag(int flag);
+extern void pasemi_dma_set_flag(int flag);
+extern void pasemi_dma_clear_flag(int flag);
+
 /* Initialize the library, must be called before any other functions */
 extern int pasemi_dma_init(void);
 
#7 lore raw

PATCH 3/6 pasemi: Add function engine management functions to dma_lib

In reply to Olof Johansson

Used to allocate functions for crypto/checksum offload.

arch/powerpc/platforms/pasemi/dma_lib.c +40 -0
Index: k.org/arch/powerpc/platforms/pasemi/dma_lib.c
===================================================================
@@ -27,6 +27,7 @@
 #define MAX_TXCH 64
 #define MAX_RXCH 64
 #define MAX_FLAGS 64
+#define MAX_FUN 8
 
 static struct pasdma_status *dma_status;
 
@@ -45,6 +46,7 @@ static struct pci_dev *dma_pdev;
 static DECLARE_BITMAP(txch_free, MAX_TXCH);
 static DECLARE_BITMAP(rxch_free, MAX_RXCH);
 static DECLARE_BITMAP(flags_free, MAX_FLAGS);
+static DECLARE_BITMAP(fun_free, MAX_FUN);
 
 /* pasemi_read_iob_reg - read IOB register
  * @reg: Register to read (offset into PCI CFG space)
@@ -440,6 +442,41 @@ void pasemi_dma_clear_flag(int flag)
 }
 EXPORT_SYMBOL(pasemi_dma_clear_flag);
 
+/* pasemi_dma_alloc_fun - Allocate a function engine
+ *
+ * Allocates a function engine to use for crypto/checksum offload
+ * Returns allocated engine (0-8), < 0 on error.
+ */
+int pasemi_dma_alloc_fun(void)
+{
+	int bit;
+
+retry:
+	bit = find_next_bit(fun_free, MAX_FLAGS, 0);
+	if (bit >= MAX_FLAGS)
+		return -ENOSPC;
+	if (!test_and_clear_bit(bit, fun_free))
+		goto retry;
+
+	return bit;
+}
+EXPORT_SYMBOL(pasemi_dma_alloc_fun);
+
+
+/* pasemi_dma_free_fun - Deallocates a function engine
+ * @flag: Engine number to deallocate
+ *
+ * Frees up a function engine so it can be used for other purposes.
+ */
+void pasemi_dma_free_fun(int fun)
+{
+	BUG_ON(test_bit(fun, fun_free));
+	BUG_ON(fun >= MAX_FLAGS);
+	set_bit(fun, fun_free);
+}
+EXPORT_SYMBOL(pasemi_dma_free_fun);
+
+
 static void *map_onedev(struct pci_dev *p, int index)
 {
 	struct device_node *dn;
@@ -572,6 +609,9 @@ int pasemi_dma_init(void)
 	for (i = 0; i < MAX_FLAGS; i++)
 		__set_bit(i, flags_free);
 
+	for (i = 0; i < MAX_FUN; i++)
+		__set_bit(i, fun_free);
+
 	/* clear all status flags */
 	pasemi_write_dma_reg(PAS_DMA_TXF_CFLG0, 0xffffffff);
 	pasemi_write_dma_reg(PAS_DMA_TXF_CFLG1, 0xffffffff);
include/asm-powerpc/pasemi_dma.h +4 -0
Index: k.org/include/asm-powerpc/pasemi_dma.h
===================================================================
@@ -472,6 +472,10 @@ extern void pasemi_dma_free_flag(int fla
 extern void pasemi_dma_set_flag(int flag);
 extern void pasemi_dma_clear_flag(int flag);
 
+/* Routines to allocate function engines */
+extern int  pasemi_dma_alloc_fun(void);
+extern void pasemi_dma_free_fun(int fun);
+
 /* Initialize the library, must be called before any other functions */
 extern int pasemi_dma_init(void);
 
#8 lore raw

PATCH 4/6 pasemi_mac: jumbo frame support

In reply to Olof Johansson

First cut at jumbo frame support. To support large MTU, one or several separate channels must be allocated to calculate the TCP/UDP checksum separately, since the mac lacks enough buffers to hold a whole packet while it's being calculated.

Furthermore, it seems that a single function channel is not quite enough to feed one of the 10Gig links, so allocate two channels for XAUI interfaces.

drivers/net/pasemi_mac.c +260 -32
Index: 2.6.25/drivers/net/pasemi_mac.c
===================================================================
@@ -59,11 +59,12 @@
 /* Must be a power of two */
 #define RX_RING_SIZE 2048
 #define TX_RING_SIZE 4096
+#define CS_RING_SIZE (TX_RING_SIZE*2)
 
 #define LRO_MAX_AGGR 64
 
 #define PE_MIN_MTU	64
-#define PE_MAX_MTU	1500
+#define PE_MAX_MTU	9000
 #define PE_DEF_MTU	ETH_DATA_LEN
 
 #define DEFAULT_MSG_ENABLE	  \
@@ -81,6 +82,7 @@
 #define RX_DESC(rx, num)	((rx)->chan.ring_virt[(num) & (RX_RING_SIZE-1)])
 #define RX_DESC_INFO(rx, num)	((rx)->ring_info[(num) & (RX_RING_SIZE-1)])
 #define RX_BUFF(rx, num)	((rx)->buffers[(num) & (RX_RING_SIZE-1)])
+#define CS_DESC(cs, num)	((cs)->chan.ring_virt[(num) & (CS_RING_SIZE-1)])
 
 #define RING_USED(ring)		(((ring)->next_to_fill - (ring)->next_to_clean) \
 				 & ((ring)->size - 1))
@@ -322,6 +324,103 @@ static int pasemi_mac_unmap_tx_skb(struc
 	return (nfrags + 3) & ~1;
 }
 
+static struct pasemi_mac_csring *pasemi_mac_setup_csring(struct pasemi_mac *mac)
+{
+	struct pasemi_mac_csring *ring;
+	u32 val;
+	unsigned int cfg;
+	int chno;
+
+	ring = pasemi_dma_alloc_chan(TXCHAN, sizeof(struct pasemi_mac_csring),
+				       offsetof(struct pasemi_mac_csring, chan));
+
+	if (!ring) {
+		dev_err(&mac->pdev->dev, "Can't allocate checksum channel\n");
+		goto out_chan;
+	}
+
+	chno = ring->chan.chno;
+
+	ring->size = CS_RING_SIZE;
+	ring->next_to_fill = 0;
+
+	/* Allocate descriptors */
+	if (pasemi_dma_alloc_ring(&ring->chan, CS_RING_SIZE))
+		goto out_ring_desc;
+
+	write_dma_reg(PAS_DMA_TXCHAN_BASEL(chno),
+		      PAS_DMA_TXCHAN_BASEL_BRBL(ring->chan.ring_dma));
+	val = PAS_DMA_TXCHAN_BASEU_BRBH(ring->chan.ring_dma >> 32);
+	val |= PAS_DMA_TXCHAN_BASEU_SIZ(CS_RING_SIZE >> 3);
+
+	write_dma_reg(PAS_DMA_TXCHAN_BASEU(chno), val);
+
+	ring->events[0] = pasemi_dma_alloc_flag();
+	ring->events[1] = pasemi_dma_alloc_flag();
+	if (ring->events[0] < 0 || ring->events[1] < 0)
+		goto out_flags;
+
+	pasemi_dma_clear_flag(ring->events[0]);
+	pasemi_dma_clear_flag(ring->events[1]);
+
+	ring->fun = pasemi_dma_alloc_fun();
+	if (ring->fun < 0)
+		goto out_fun;
+
+	cfg = PAS_DMA_TXCHAN_CFG_TY_FUNC | PAS_DMA_TXCHAN_CFG_UP |
+	      PAS_DMA_TXCHAN_CFG_TATTR(ring->fun) |
+	      PAS_DMA_TXCHAN_CFG_LPSQ | PAS_DMA_TXCHAN_CFG_LPDQ;
+
+	if (translation_enabled())
+		cfg |= PAS_DMA_TXCHAN_CFG_TRD | PAS_DMA_TXCHAN_CFG_TRR;
+
+	write_dma_reg(PAS_DMA_TXCHAN_CFG(chno), cfg);
+
+	/* enable channel */
+	pasemi_dma_start_chan(&ring->chan, PAS_DMA_TXCHAN_TCMDSTA_SZ |
+					   PAS_DMA_TXCHAN_TCMDSTA_DB |
+					   PAS_DMA_TXCHAN_TCMDSTA_DE |
+					   PAS_DMA_TXCHAN_TCMDSTA_DA);
+
+	return ring;
+
+out_fun:
+out_flags:
+	if (ring->events[0] >= 0)
+		pasemi_dma_free_flag(ring->events[0]);
+	if (ring->events[1] >= 0)
+		pasemi_dma_free_flag(ring->events[1]);
+	pasemi_dma_free_ring(&ring->chan);
+out_ring_desc:
+	pasemi_dma_free_chan(&ring->chan);
+out_chan:
+
+	return NULL;
+}
+
+static void pasemi_mac_setup_csrings(struct pasemi_mac *mac)
+{
+	int i;
+	mac->cs[0] = pasemi_mac_setup_csring(mac);
+	if (mac->type == MAC_TYPE_XAUI)
+		mac->cs[1] = pasemi_mac_setup_csring(mac);
+	else
+		mac->cs[1] = 0;
+
+	for (i = 0; i < MAX_CS; i++)
+		if (mac->cs[i])
+			mac->num_cs++;
+}
+
+static void pasemi_mac_free_csring(struct pasemi_mac_csring *csring)
+{
+	pasemi_dma_stop_chan(&csring->chan);
+	pasemi_dma_free_flag(csring->events[0]);
+	pasemi_dma_free_flag(csring->events[1]);
+	pasemi_dma_free_ring(&csring->chan);
+	pasemi_dma_free_chan(&csring->chan);
+}
+
 static int pasemi_mac_setup_rx_resources(const struct net_device *dev)
 {
 	struct pasemi_mac_rxring *ring;
@@ -445,7 +544,7 @@ pasemi_mac_setup_tx_resources(const stru
 	cfg = PAS_DMA_TXCHAN_CFG_TY_IFACE |
 	      PAS_DMA_TXCHAN_CFG_TATTR(mac->dma_if) |
 	      PAS_DMA_TXCHAN_CFG_UP |
-	      PAS_DMA_TXCHAN_CFG_WT(2);
+	      PAS_DMA_TXCHAN_CFG_WT(4);
 
 	if (translation_enabled())
 		cfg |= PAS_DMA_TXCHAN_CFG_TRD | PAS_DMA_TXCHAN_CFG_TRR;
@@ -810,13 +909,21 @@ restart:
 		u64 mactx = TX_DESC(txring, i);
 		struct sk_buff *skb;
 
-		skb = TX_DESC_INFO(txring, i+1).skb;
-		nr_frags = TX_DESC_INFO(txring, i).dma;
-
 		if ((mactx  & XCT_MACTX_E) ||
 		    (*chan->status & PAS_STATUS_ERROR))
 			pasemi_mac_tx_error(mac, mactx);
 
+		/* Skip over control descriptors */
+		if (!(mactx & XCT_MACTX_LLEN_M)) {
+			TX_DESC(txring, i) = 0;
+			TX_DESC(txring, i+1) = 0;
+			buf_count = 2;
+			continue;
+		}
+
+		skb = TX_DESC_INFO(txring, i+1).skb;
+		nr_frags = TX_DESC_INFO(txring, i).dma;
+
 		if (unlikely(mactx & XCT_MACTX_O))
 			/* Not yet transmitted */
 			break;
@@ -1058,6 +1165,12 @@ static int pasemi_mac_open(struct net_de
 	if (!mac->tx)
 		goto out_tx_ring;
 
+	if (dev->mtu > 1500) {
+		pasemi_mac_setup_csrings(mac);
+		if (!mac->num_cs)
+			goto out_tx_ring;
+	}
+
 	/* 0x3ff with 33MHz clock is about 31us */
 	write_iob_reg(PAS_IOB_DMA_COM_TIMEOUTCFG,
 		      PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(0x3ff));
@@ -1241,7 +1354,7 @@ static int pasemi_mac_close(struct net_d
 {
 	struct pasemi_mac *mac = netdev_priv(dev);
 	unsigned int sta;
-	int rxch, txch;
+	int rxch, txch, i;
 
 	rxch = rx_ring(mac)->chan.chno;
 	txch = tx_ring(mac)->chan.chno;
@@ -1286,6 +1399,9 @@ static int pasemi_mac_close(struct net_d
 	free_irq(mac->tx->chan.irq, mac->tx);
 	free_irq(mac->rx->chan.irq, mac->rx);
 
+	for (i = 0; i < mac->num_cs; i++)
+		pasemi_mac_free_csring(mac->cs[i]);
+
 	/* Free resources */
 	pasemi_mac_free_rx_resources(mac);
 	pasemi_mac_free_tx_resources(mac);
@@ -1293,35 +1409,113 @@ static int pasemi_mac_close(struct net_d
 	return 0;
 }
 
+static void pasemi_mac_queue_csdesc(const struct sk_buff *skb,
+				    const dma_addr_t *map,
+				    const unsigned int *map_size,
+				    struct pasemi_mac_txring *txring,
+				    struct pasemi_mac_csring *csring)
+{
+	u64 fund;
+	dma_addr_t cs_dest;
+	const int nh_off = skb_network_offset(skb);
+	const int nh_len = skb_network_header_len(skb);
+	const int nfrags = skb_shinfo(skb)->nr_frags;
+	int cs_size, i, fill, hdr, cpyhdr, evt;
+	dma_addr_t csdma;
+
+	fund = XCT_FUN_ST | XCT_FUN_RR_8BRES |
+	       XCT_FUN_O | XCT_FUN_FUN(csring->fun) |
+	       XCT_FUN_CRM_SIG | XCT_FUN_LLEN(skb->len - nh_off) |
+	       XCT_FUN_SHL(nh_len >> 2) | XCT_FUN_SE;
+
+	switch (ip_hdr(skb)->protocol) {
+	case IPPROTO_TCP:
+		fund |= XCT_FUN_SIG_TCP4;
+		/* TCP checksum is 16 bytes into the header */
+		cs_dest = map[0] + skb_transport_offset(skb) + 16;
+		break;
+	case IPPROTO_UDP:
+		fund |= XCT_FUN_SIG_UDP4;
+		/* UDP checksum is 6 bytes into the header */
+		cs_dest = map[0] + skb_transport_offset(skb) + 6;
+		break;
+	default:
+		WARN_ON(1);
+	}
+
+	/* Do the checksum offloaded */
+	fill = csring->next_to_fill;
+	hdr = fill;
+
+	CS_DESC(csring, fill++) = fund;
+	/* Room for 8BRES. Checksum result is really 2 bytes into it */
+	csdma = csring->chan.ring_dma + (fill & (CS_RING_SIZE-1)) * 8 + 2;
+	CS_DESC(csring, fill++) = 0;
+
+	CS_DESC(csring, fill) = XCT_PTR_LEN(map_size[0]-nh_off) | XCT_PTR_ADDR(map[0]+nh_off);
+	for (i = 1; i <= nfrags; i++)
+		CS_DESC(csring, fill+i) = XCT_PTR_LEN(map_size[i]) | XCT_PTR_ADDR(map[i]);
+
+	fill += i;
+	if (fill & 1)
+		fill++;
+
+	/* Copy the result into the TCP packet */
+	cpyhdr = fill;
+	CS_DESC(csring, fill++) = XCT_FUN_O | XCT_FUN_FUN(csring->fun) |
+				  XCT_FUN_LLEN(2) | XCT_FUN_SE;
+	CS_DESC(csring, fill++) = XCT_PTR_LEN(2) | XCT_PTR_ADDR(cs_dest) | XCT_PTR_T;
+	CS_DESC(csring, fill++) = XCT_PTR_LEN(2) | XCT_PTR_ADDR(csdma);
+	fill++;
+
+	evt = !csring->last_event;
+	csring->last_event = evt;
+
+	/* Event handshaking with MAC TX */
+	CS_DESC(csring, fill++) = CTRL_CMD_T | CTRL_CMD_META_EVT | CTRL_CMD_O |
+				  CTRL_CMD_ETYPE_SET | CTRL_CMD_REG(csring->events[evt]);
+	CS_DESC(csring, fill++) = 0;
+	CS_DESC(csring, fill++) = CTRL_CMD_T | CTRL_CMD_META_EVT | CTRL_CMD_O |
+				  CTRL_CMD_ETYPE_WCLR | CTRL_CMD_REG(csring->events[!evt]);
+	CS_DESC(csring, fill++) = 0;
+	csring->next_to_fill = fill & (CS_RING_SIZE-1);
+
+	cs_size = fill - hdr;
+	write_dma_reg(PAS_DMA_TXCHAN_INCR(csring->chan.chno), (cs_size) >> 1);
+
+	/* TX-side event handshaking */
+	fill = txring->next_to_fill;
+	TX_DESC(txring, fill++) = CTRL_CMD_T | CTRL_CMD_META_EVT | CTRL_CMD_O |
+				  CTRL_CMD_ETYPE_WSET | CTRL_CMD_REG(csring->events[evt]);
+	TX_DESC(txring, fill++) = 0;
+	TX_DESC(txring, fill++) = CTRL_CMD_T | CTRL_CMD_META_EVT | CTRL_CMD_O |
+				  CTRL_CMD_ETYPE_CLR | CTRL_CMD_REG(csring->events[!evt]);
+	TX_DESC(txring, fill++) = 0;
+	txring->next_to_fill = fill;
+
+	write_dma_reg(PAS_DMA_TXCHAN_INCR(txring->chan.chno), 2);
+
+	return;
+}
+
 static int pasemi_mac_start_tx(struct sk_buff *skb, struct net_device *dev)
 {
-	struct pasemi_mac *mac = netdev_priv(dev);
-	struct pasemi_mac_txring *txring;
-	u64 dflags, mactx;
+	struct pasemi_mac * const mac = netdev_priv(dev);
+	struct pasemi_mac_txring * const txring = tx_ring(mac);
+	struct pasemi_mac_csring *csring;
+	u64 dflags = 0;
+	u64 mactx;
 	dma_addr_t map[MAX_SKB_FRAGS+1];
 	unsigned int map_size[MAX_SKB_FRAGS+1];
 	unsigned long flags;
 	int i, nfrags;
 	int fill;
+	const int nh_off = skb_network_offset(skb);
+	const int nh_len = skb_network_header_len(skb);
 
-	dflags = XCT_MACTX_O | XCT_MACTX_ST | XCT_MACTX_CRC_PAD;
-
-	if (skb->ip_summed == CHECKSUM_PARTIAL) {
-		const unsigned char *nh = skb_network_header(skb);
+	prefetch(&txring->ring_info);
 
-		switch (ip_hdr(skb)->protocol) {
-		case IPPROTO_TCP:
-			dflags |= XCT_MACTX_CSUM_TCP;
-			dflags |= XCT_MACTX_IPH(skb_network_header_len(skb) >> 2);
-			dflags |= XCT_MACTX_IPO(nh - skb->data);
-			break;
-		case IPPROTO_UDP:
-			dflags |= XCT_MACTX_CSUM_UDP;
-			dflags |= XCT_MACTX_IPH(skb_network_header_len(skb) >> 2);
-			dflags |= XCT_MACTX_IPO(nh - skb->data);
-			break;
-		}
-	}
+	dflags = XCT_MACTX_O | XCT_MACTX_ST | XCT_MACTX_CRC_PAD;
 
 	nfrags = skb_shinfo(skb)->nr_frags;
 
@@ -1344,24 +1538,46 @@ static int pasemi_mac_start_tx(struct sk
 		}
 	}
 
-	mactx = dflags | XCT_MACTX_LLEN(skb->len);
+	if (skb->ip_summed == CHECKSUM_PARTIAL && skb->len <= 1540) {
+		switch (ip_hdr(skb)->protocol) {
+		case IPPROTO_TCP:
+			dflags |= XCT_MACTX_CSUM_TCP;
+			dflags |= XCT_MACTX_IPH(nh_len >> 2);
+			dflags |= XCT_MACTX_IPO(nh_off);
+			break;
+		case IPPROTO_UDP:
+			dflags |= XCT_MACTX_CSUM_UDP;
+			dflags |= XCT_MACTX_IPH(nh_len >> 2);
+			dflags |= XCT_MACTX_IPO(nh_off);
+			break;
+		default:
+			WARN_ON(1);
+		}
+	}
 
-	txring = tx_ring(mac);
+	mactx = dflags | XCT_MACTX_LLEN(skb->len);
 
 	spin_lock_irqsave(&txring->lock, flags);
 
-	fill = txring->next_to_fill;
-
 	/* Avoid stepping on the same cache line that the DMA controller
 	 * is currently about to send, so leave at least 8 words available.
 	 * Total free space needed is mactx + fragments + 8
 	 */
-	if (RING_AVAIL(txring) < nfrags + 10) {
+	if (RING_AVAIL(txring) < nfrags + 14) {
 		/* no room -- stop the queue and wait for tx intr */
 		netif_stop_queue(dev);
 		goto out_err;
 	}
 
+	if (mac->num_cs && skb->len > 1540) {
+		csring = mac->cs[mac->last_cs];
+		mac->last_cs = (mac->last_cs+1) % mac->num_cs;
+
+		/* Queue up checksum + event descriptors, if needed */
+		pasemi_mac_queue_csdesc(skb, map, map_size, txring, csring);
+	}
+
+	fill = txring->next_to_fill;
 	TX_DESC(txring, fill) = mactx;
 	TX_DESC_INFO(txring, fill).dma = nfrags;
 	fill++;
@@ -1441,6 +1657,7 @@ static int pasemi_mac_change_mtu(struct 
 	unsigned int reg;
 	unsigned int rcmdsta;
 	int running;
+	int ret = 0;
 
 	if (new_mtu < PE_MIN_MTU || new_mtu > PE_MAX_MTU)
 		return -EINVAL;
@@ -1462,6 +1679,16 @@ static int pasemi_mac_change_mtu(struct 
 		pasemi_mac_pause_rxint(mac);
 		pasemi_mac_clean_rx(rx_ring(mac), RX_RING_SIZE);
 		pasemi_mac_free_rx_buffers(mac);
+
+	}
+
+	/* Setup checksum channels if large MTU and none already allocated */
+	if (new_mtu > 1500 && !mac->num_cs) {
+		pasemi_mac_setup_csrings(mac);
+		if (!mac->num_cs) {
+			ret = -ENOMEM;
+			goto out;
+		}
 	}
 
 	/* Change maxf, i.e. what size frames are accepted.
@@ -1476,6 +1703,7 @@ static int pasemi_mac_change_mtu(struct 
 	/* MTU + ETH_HLEN + VLAN_HLEN + 2 64B cachelines */
 	mac->bufsz = new_mtu + ETH_HLEN + ETH_FCS_LEN + LOCAL_SKB_ALIGN + 128;
 
+out:
 	if (running) {
 		write_dma_reg(PAS_DMA_RXINT_RCMDSTA(mac->dma_if),
 			      rcmdsta | PAS_DMA_RXINT_RCMDSTA_EN);
@@ -1488,7 +1716,7 @@ static int pasemi_mac_change_mtu(struct 
 		pasemi_mac_intf_enable(mac);
 	}
 
-	return 0;
+	return ret;
 }
 
 static int __devinit
drivers/net/pasemi_mac.h +14 -1
Index: 2.6.25/drivers/net/pasemi_mac.h
===================================================================
@@ -27,6 +27,7 @@
 #include <linux/phy.h>
 
 #define MAX_LRO_DESCRIPTORS 8
+#define MAX_CS	2
 
 struct pasemi_mac_txring {
 	struct pasemi_dmachan chan; /* Must be first */
@@ -51,6 +52,15 @@ struct pasemi_mac_rxring {
 	struct pasemi_mac *mac;	/* Needed in intr handler */
 };
 
+struct pasemi_mac_csring {
+	struct pasemi_dmachan chan;
+	unsigned int	size;
+	unsigned int	next_to_fill;
+	int		events[2];
+	int		last_event;
+	int		fun;
+};
+
 struct pasemi_mac {
 	struct net_device *netdev;
 	struct pci_dev *pdev;
@@ -60,10 +70,12 @@ struct pasemi_mac {
 	struct napi_struct napi;
 
 	int		bufsz; /* RX ring buffer size */
+	int		last_cs;
+	int		num_cs;
+	u32		dma_if;
 	u8		type;
 #define MAC_TYPE_GMAC	1
 #define MAC_TYPE_XAUI	2
-	u32	dma_if;
 
 	u8		mac_addr[6];
 
@@ -74,6 +86,7 @@ struct pasemi_mac {
 
 	struct pasemi_mac_txring *tx;
 	struct pasemi_mac_rxring *rx;
+	struct pasemi_mac_csring *cs[MAX_CS];
 	char		tx_irq_name[10];		/* "eth%d tx" */
 	char		rx_irq_name[10];		/* "eth%d rx" */
 	int	link;
include/asm-powerpc/pasemi_dma.h +58 -2

80 lines not on this page · raw message

#9 lore raw

PATCH 5/6 pasemi_mac: Enable GSO by default

In reply to Olof Johansson

Ethtool support will handle the runtime toggling, but we do quite a bit better with it on by default so just leave it on for now.

drivers/net/pasemi_mac.c +1 -1
Index: k.org/drivers/net/pasemi_mac.c
===================================================================
@@ -1750,7 +1750,7 @@ pasemi_mac_probe(struct pci_dev *pdev, c
 	netif_napi_add(dev, &mac->napi, pasemi_mac_poll, 64);
 
 	dev->features = NETIF_F_IP_CSUM | NETIF_F_LLTX | NETIF_F_SG |
-			NETIF_F_HIGHDMA;
+			NETIF_F_HIGHDMA | NETIF_F_GSO;
 
 	mac->lro_mgr.max_aggr = LRO_MAX_AGGR;
 	mac->lro_mgr.max_desc = MAX_LRO_DESCRIPTORS;
#10 lore raw

PATCH 6/6 pasemi_mac: basic ethtool support

In reply to Olof Johansson

First cut at ethtool support, to be completed over time.

drivers/net/Makefile +2 -1
Index: 2.6.25/drivers/net/Makefile
===================================================================
@@ -218,7 +218,8 @@ obj-$(CONFIG_SMC911X) += smc911x.o
 obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
 obj-$(CONFIG_DM9000) += dm9000.o
 obj-$(CONFIG_FEC_8XX) += fec_8xx/
-obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o
+obj-$(CONFIG_PASEMI_MAC) += pasemi_mac_driver.o
+pasemi_mac_driver-objs := pasemi_mac.o pasemi_mac_ethtool.o
 obj-$(CONFIG_MLX4_CORE) += mlx4/
 obj-$(CONFIG_ENC28J60) += enc28j60.o
 
drivers/net/pasemi_mac.c +8 -18
Index: 2.6.25/drivers/net/pasemi_mac.c
===================================================================
@@ -55,12 +55,6 @@
  * - Multiqueue RX/TX
  */
 
-
-/* Must be a power of two */
-#define RX_RING_SIZE 2048
-#define TX_RING_SIZE 4096
-#define CS_RING_SIZE (TX_RING_SIZE*2)
-
 #define LRO_MAX_AGGR 64
 
 #define PE_MIN_MTU	64
@@ -77,17 +71,6 @@
 	 NETIF_MSG_RX_ERR	| \
 	 NETIF_MSG_TX_ERR)
 
-#define TX_DESC(tx, num)	((tx)->chan.ring_virt[(num) & (TX_RING_SIZE-1)])
-#define TX_DESC_INFO(tx, num)	((tx)->ring_info[(num) & (TX_RING_SIZE-1)])
-#define RX_DESC(rx, num)	((rx)->chan.ring_virt[(num) & (RX_RING_SIZE-1)])
-#define RX_DESC_INFO(rx, num)	((rx)->ring_info[(num) & (RX_RING_SIZE-1)])
-#define RX_BUFF(rx, num)	((rx)->buffers[(num) & (RX_RING_SIZE-1)])
-#define CS_DESC(cs, num)	((cs)->chan.ring_virt[(num) & (CS_RING_SIZE-1)])
-
-#define RING_USED(ring)		(((ring)->next_to_fill - (ring)->next_to_clean) \
-				 & ((ring)->size - 1))
-#define RING_AVAIL(ring)	((ring->size) - RING_USED(ring))
-
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR ("Olof Johansson <[email protected]>");
 MODULE_DESCRIPTION("PA Semi PWRficient Ethernet driver");
@@ -96,6 +79,8 @@ static int debug = -1;	/* -1 == use DEFA
 module_param(debug, int, 0);
 MODULE_PARM_DESC(debug, "PA Semi MAC bitmapped debugging message enable value");
 
+extern const struct ethtool_ops pasemi_mac_ethtool_ops;
+
 static int translation_enabled(void)
 {
 #if defined(CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE)
@@ -1148,7 +1133,7 @@ static int pasemi_mac_open(struct net_de
 {
 	struct pasemi_mac *mac = netdev_priv(dev);
 	unsigned int flags;
-	int ret;
+	int i, ret;
 
 	flags = PAS_MAC_CFG_TXP_FCE | PAS_MAC_CFG_TXP_FPC(3) |
 		PAS_MAC_CFG_TXP_SL(3) | PAS_MAC_CFG_TXP_COB(0xf) |
@@ -1171,6 +1156,10 @@ static int pasemi_mac_open(struct net_de
 			goto out_tx_ring;
 	}
 
+	/* Zero out rmon counters */
+	for (i = 0; i < 32; i++)
+		write_mac_reg(mac, PAS_MAC_RMON(i), 0);
+
 	/* 0x3ff with 33MHz clock is about 31us */
 	write_iob_reg(PAS_IOB_DMA_COM_TIMEOUTCFG,
 		      PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(0x3ff));
@@ -1812,6 +1801,7 @@ pasemi_mac_probe(struct pci_dev *pdev, c
 	mac->bufsz = dev->mtu + ETH_HLEN + ETH_FCS_LEN + LOCAL_SKB_ALIGN + 128;
 
 	dev->change_mtu = pasemi_mac_change_mtu;
+	dev->ethtool_ops = &pasemi_mac_ethtool_ops;
 
 	if (err)
 		goto out;
drivers/net/pasemi_mac.h +20 -0
Index: 2.6.25/drivers/net/pasemi_mac.h
===================================================================
@@ -26,6 +26,12 @@
 #include <linux/spinlock.h>
 #include <linux/phy.h>
 
+/* Must be a power of two */
+#define RX_RING_SIZE 2048
+#define TX_RING_SIZE 4096
+#define CS_RING_SIZE (TX_RING_SIZE*2)
+
+
 #define MAX_LRO_DESCRIPTORS 8
 #define MAX_CS	2
 
@@ -103,6 +109,16 @@ struct pasemi_mac_buffer {
 	dma_addr_t	dma;
 };
 
+#define TX_DESC(tx, num)	((tx)->chan.ring_virt[(num) & (TX_RING_SIZE-1)])
+#define TX_DESC_INFO(tx, num)	((tx)->ring_info[(num) & (TX_RING_SIZE-1)])
+#define RX_DESC(rx, num)	((rx)->chan.ring_virt[(num) & (RX_RING_SIZE-1)])
+#define RX_DESC_INFO(rx, num)	((rx)->ring_info[(num) & (RX_RING_SIZE-1)])
+#define RX_BUFF(rx, num)	((rx)->buffers[(num) & (RX_RING_SIZE-1)])
+#define CS_DESC(cs, num)	((cs)->chan.ring_virt[(num) & (CS_RING_SIZE-1)])
+
+#define RING_USED(ring)	(((ring)->next_to_fill - (ring)->next_to_clean) \
+				& ((ring)->size - 1))
+#define RING_AVAIL(ring)	((ring->size) - RING_USED(ring))
 
 /* PCI register offsets and formats */
 
@@ -114,6 +130,7 @@ enum {
 	PAS_MAC_CFG_ADR0 = 0x8c,
 	PAS_MAC_CFG_ADR1 = 0x90,
 	PAS_MAC_CFG_TXP = 0x98,
+	PAS_MAC_CFG_RMON = 0x100,
 	PAS_MAC_IPC_CHNL = 0x208,
 };
 
@@ -185,6 +202,8 @@ enum {
 #define PAS_MAC_CFG_TXP_TIFG(x)		(((x) << PAS_MAC_CFG_TXP_TIFG_S) & \
 					 PAS_MAC_CFG_TXP_TIFG_M)
 
+#define PAS_MAC_RMON(r)			(0x100+(r)*4)
+
 #define PAS_MAC_IPC_CHNL_DCHNO_M	0x003f0000
 #define PAS_MAC_IPC_CHNL_DCHNO_S	16
 #define PAS_MAC_IPC_CHNL_DCHNO(x)	(((x) << PAS_MAC_IPC_CHNL_DCHNO_S) & \
@@ -194,4 +213,5 @@ enum {
 #define PAS_MAC_IPC_CHNL_BCH(x)		(((x) << PAS_MAC_IPC_CHNL_BCH_S) & \
 					 PAS_MAC_IPC_CHNL_BCH_M)
 
+
 #endif /* PASEMI_MAC_H */
drivers/net/pasemi_mac_ethtool.c new file +159 -0

159 lines not on this page · raw message

#11 lore raw
In reply to Olof Johansson
Quoted 6 lines · Olof Johansson

Here's a set of updates for pasemi_mac for 2.6.26. Some of them touch the dma_lib in the platform code as well, but it's easier if it's all merged through netdev to avoid dependencies.

Major highlights are jumbo frame support and ethtool basics, the rest is mostly minor plumbing around it.

What route do you think these should take upstream? I'm happy to take them if Jeff is OK with that.

Paul.

#12 lore raw
Quoted 11 lines · Paul Mackerras
Quoted 6 lines · Olof Johansson

Here's a set of updates for pasemi_mac for 2.6.26. Some of them touch the dma_lib in the platform code as well, but it's easier if it's all merged through netdev to avoid dependencies.

Major highlights are jumbo frame support and ethtool basics, the rest is mostly minor plumbing around it.

What route do you think these should take upstream? I'm happy to take them if Jeff is OK with that.

I've sent them through Jeff in the past, that's been convenient when there's been churn in the network APIs. I'm not sure if there's much of that for .26 though.

If Jeff prefers to ACK, I'll just add it to my git and ask you to pull that. But I was originally planning to just feed it through him.

(Note: I'll repost the patch set later today or tomorrow with a couple of tweaks).

-Olof

#13 lore raw
Quoted 16 lines · Olof Johansson
Quoted 10 lines · Paul Mackerras
Quoted 6 lines · Olof Johansson

Here's a set of updates for pasemi_mac for 2.6.26. Some of them touch the dma_lib in the platform code as well, but it's easier if it's all merged through netdev to avoid dependencies.

Major highlights are jumbo frame support and ethtool basics, the rest is mostly minor plumbing around it.

What route do you think these should take upstream? I'm happy to take them if Jeff is OK with that.

I've sent them through Jeff in the past, that's been convenient when there's been churn in the network APIs. I'm not sure if there's much of that for .26 though.

Quoted 5 lines

If Jeff prefers to ACK, I'll just add it to my git and ask you to pull that. But I was originally planning to just feed it through him.

(Note: I'll repost the patch set later today or tomorrow with a couple of tweaks).

Not much networking churn for 2.6.26, and IMO this patchset have above-average ppc changes/dependencies, so.... ACK

#14 lore raw
Quoted 10 lines · Jeff Garzik
Quoted 9 lines · Olof Johansson
Quoted 2 lines · Paul Mackerras

What route do you think these should take upstream? I'm happy to take them if Jeff is OK with that.

I've sent them through Jeff in the past, that's been convenient when there's been churn in the network APIs. I'm not sure if there's much of that for .26 though.

Quoted 8 lines
Quoted 5 lines

If Jeff prefers to ACK, I'll just add it to my git and ask you to pull that. But I was originally planning to just feed it through him.

(Note: I'll repost the patch set later today or tomorrow with a couple of tweaks).

Not much networking churn for 2.6.26, and IMO this patchset have
above-average ppc changes/dependencies, so.... ACK

Ok, thanks Jeff.

Paul: I'll commit to my tree and ask you to pull later.

-Olof