Skip to contentSkip to conversation

dt-bindings: Correct paths in Rockchip power domains binding document

PATCH New Geert Uytterhoeven 2 participants 2 messages Oct 16, 2015

Subsystems (2)
Device tree bindings Arm Rockchip
lore
Share & tools
lore

Geert Uytterhoeven

author
#0 lore raw

PATCH 1/1 dt-bindings: Correct paths in Rockchip power domains binding document

Signed-off-by Geert Uytterhoeven <[email protected]>
---
 Documentation/devicetree/bindings/soc/rockchip/power_domain.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/soc/rockchip/power_domain.txt +2 -2
index 4be34188afe41029..112756e11802c7cc 100644
@@ -13,7 +13,7 @@ Required properties for power domain controller:
 
 Required properties for power domain sub nodes:
 - reg: index of the power domain, should use macros in:
-	"include/dt-bindings/power-domain/rk3288.h" - for RK3288 type power domain.
+	"include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain.
 - clocks (optional): phandles to clocks which need to be enabled while power domain
 	switches state.
 

@@ -35,7 +35,7 @@ Node of a device using power domains must have a power-domains property,
 containing a phandle to the power device node and an index specifying which
 power domain to use.
 The index should use macros in:
-	"include/dt-bindings/power-domain/rk3288.h" - for rk3288 type power domain.
+	"include/dt-bindings/power/rk3288-power.h" - for rk3288 type power domain.
 
 Example of the node using power domain:
Signature · 1 line
1.9.1
maintainer
#1 lore raw

PATCH 1/1 dt-bindings: Correct paths in Rockchip power domains binding document

Hi Geert,

Am Freitag, 16. Oktober 2015, 16:11:41 schrieb Geert Uytterhoeven:

Quoted 4 lines
Signed-off-by Geert Uytterhoeven <[email protected]>
---
 Documentation/devicetree/bindings/soc/rockchip/power_domain.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Thanks for catching this. I've applied it to my drivers branch with the other fixes.

Thanks
Heiko