arm: replace remaining __FUNCTION__ occurances
Subsystems (5)
PATCH 1/1 arm: replace remaining __FUNCTION__ occurances
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by Harvey Harrison <[email protected]>
--- arch/arm/common/it8152.c | 6 ++-- arch/arm/mach-h720x/common.c | 12 +++--- arch/arm/mach-imx/dma.c | 12 +++--- arch/arm/mach-imx/irq.c | 6 ++-- arch/arm/mach-iop13xx/iq81340mc.c | 2 +- arch/arm/mach-iop13xx/iq81340sc.c | 2 +- arch/arm/mach-iop13xx/pci.c | 8 ++-- arch/arm/mach-iop13xx/setup.c | 2 +- arch/arm/mach-ixp4xx/common-pci.c | 2 +- arch/arm/mach-ixp4xx/gtwx5715-pci.c | 2 +- arch/arm/mach-netx/generic.c | 6 ++-- arch/arm/mach-orion/gpio.c | 12 +++--- arch/arm/mach-pnx4008/clock.c | 2 +- arch/arm/mach-pnx4008/dma.c | 2 +- arch/arm/mach-pxa/cm-x270-pci.c | 2 +- arch/arm/mach-pxa/cm-x270.c | 4 +- arch/arm/mach-pxa/dma.c | 2 +- arch/arm/mach-pxa/em-x270.c | 2 +- arch/arm/mach-pxa/mainstone.c | 4 +- arch/arm/mach-pxa/trizeps4.c | 8 ++-- arch/arm/mach-sa1100/badge4.c | 6 ++-- arch/arm/mach-sa1100/cpu-sa1100.c | 2 +- arch/arm/mach-sa1100/dma.c | 8 ++-- arch/arm/mach-sa1100/h3600.c | 14 ++++---- arch/arm/plat-iop/pci.c | 2 +- arch/arm/plat-omap/dma.c | 4 +- arch/arm/plat-omap/dmtimer.c | 2 +- arch/arm/plat-s3c24xx/dma.c | 64 +++++++++++++++++----------------- 28 files changed, 100 insertions(+), 100 deletions(-)
arch/arm/common/it8152.c +3 -3
@@ -274,7 +274,7 @@ static int it8152_pci_platform_notify_remove(struct device *dev)int dma_needs_bounce (struct device *dev,dma_addr_t dma_addr,size_t size) {dev_dbg (dev,"%s: dma_addr %08x, size %08x\n" , - __FUNCTION__, dma_addr, size); + __func__, dma_addr, size);return (dev->bus == &pci_bus_type) && ((dma_addr + size -PHYS_OFFSET ) >=SZ_64M ); }
@@ -289,7 +289,7 @@ int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)*/ int pci_set_dma_mask (struct pci_dev *dev,u64 mask) { -dev_dbg (&dev->dev,"%s: %llx\n" , __FUNCTION__, mask); +dev_dbg (&dev->dev,"%s: %llx\n" , __func__, mask);if (mask >=PHYS_OFFSET +SZ_64M -1 )return 0 ;
@@ -299,7 +299,7 @@ int pci_set_dma_mask(struct pci_dev *dev, u64 mask)int pci_set_consistent_dma_mask (struct pci_dev *dev,u64 mask) { -dev_dbg (&dev->dev,"%s: %llx\n" , __FUNCTION__, mask); +dev_dbg (&dev->dev,"%s: %llx\n" , __func__, mask);if (mask >=PHYS_OFFSET +SZ_64M -1 )return 0 ;
arch/arm/mach-h720x/common.c +6 -6
@@ -103,7 +103,7 @@ static void h720x_gpio_handler(unsigned int mask, unsigned int irq, struct irq_desc *desc) { - IRQDBG("%s irq: %d\n",__FUNCTION__,irq); + IRQDBG("%s irq: %d\n", __func__, irq); desc = irq_desc + irq;while (mask) {if (mask &1 ) {
@@ -123,7 +123,7 @@ h720x_gpioa_demux_handler(unsigned int irq_unused, struct irq_desc *desc) mask =CPU_REG (GPIO_A_VIRT ,GPIO_STAT ); irq =IRQ_CHAINED_GPIOA (0 ); -IRQDBG ("%s mask: 0x%08x irq: %d\n" ,__FUNCTION__,mask,irq); +IRQDBG ("%s mask: 0x%08x irq: %d\n" , __func__, mask,irq);h720x_gpio_handler (mask, irq, desc); }
@@ -133,7 +133,7 @@ h720x_gpiob_demux_handler(unsigned int irq_unused, struct irq_desc *desc)unsigned int mask, irq; mask =CPU_REG (GPIO_B_VIRT ,GPIO_STAT ); irq =IRQ_CHAINED_GPIOB (0 ); -IRQDBG ("%s mask: 0x%08x irq: %d\n" ,__FUNCTION__,mask,irq); +IRQDBG ("%s mask: 0x%08x irq: %d\n" , __func__, mask,irq);h720x_gpio_handler (mask, irq, desc); }
@@ -144,7 +144,7 @@ h720x_gpioc_demux_handler(unsigned int irq_unused, struct irq_desc *desc) mask =CPU_REG (GPIO_C_VIRT ,GPIO_STAT ); irq =IRQ_CHAINED_GPIOC (0 ); -IRQDBG ("%s mask: 0x%08x irq: %d\n" ,__FUNCTION__,mask,irq); +IRQDBG ("%s mask: 0x%08x irq: %d\n" , __func__, mask,irq);h720x_gpio_handler (mask, irq, desc); }
@@ -155,7 +155,7 @@ h720x_gpiod_demux_handler(unsigned int irq_unused, struct irq_desc *desc) mask =CPU_REG (GPIO_D_VIRT ,GPIO_STAT ); irq =IRQ_CHAINED_GPIOD (0 ); -IRQDBG ("%s mask: 0x%08x irq: %d\n" ,__FUNCTION__,mask,irq); +IRQDBG ("%s mask: 0x%08x irq: %d\n" , __func__, mask,irq);h720x_gpio_handler (mask, irq, desc); }
@@ -167,7 +167,7 @@ h720x_gpioe_demux_handler(unsigned int irq_unused, struct irq_desc *desc) mask =CPU_REG (GPIO_E_VIRT ,GPIO_STAT ); irq =IRQ_CHAINED_GPIOE (0 ); -IRQDBG ("%s mask: 0x%08x irq: %d\n" ,__FUNCTION__,mask,irq); +IRQDBG ("%s mask: 0x%08x irq: %d\n" , __func__, mask,irq); h720x_gpio_handler(mask, irq, desc); }#endif
arch/arm/mach-imx/dma.c +6 -6
@@ -54,7 +54,7 @@ static inline int imx_dma_sg_next(imx_dmach_t dma_ch, unsigned int lastcount)if (!imxdma->name) {printk (KERN_CRIT "%s: called for not allocated channel %d\n" , - __FUNCTION__, dma_ch); + __func__, dma_ch);return 0 ; }
@@ -288,7 +288,7 @@ imx_dma_setup_handlers(imx_dmach_t dma_ch,if (!imxdma->name) {printk (KERN_CRIT "%s: called for not allocated channel %d\n" , - __FUNCTION__, dma_ch); + __func__, dma_ch);return -ENODEV ; }
@@ -321,7 +321,7 @@ void imx_dma_enable(imx_dmach_t dma_ch)if (!imxdma->name) {printk (KERN_CRIT "%s: called for not allocated channel %d\n" , - __FUNCTION__, dma_ch); + __func__, dma_ch);return ; }
@@ -365,7 +365,7 @@ int imx_dma_request(imx_dmach_t dma_ch, const char *name)if (dma_ch >=IMX_DMA_CHANNELS ) {printk (KERN_CRIT "%s: called for non-existed channel %d\n" , - __FUNCTION__, dma_ch); + __func__, dma_ch);return -EINVAL ; }
@@ -396,7 +396,7 @@ void imx_dma_free(imx_dmach_t dma_ch)if (!imxdma->name) {printk (KERN_CRIT "%s: trying to free channel %d which is already freed\n" , - __FUNCTION__, dma_ch); + __func__, dma_ch);return ; }
@@ -456,7 +456,7 @@ imx_dma_request_by_prio(imx_dmach_t * pdma_ch, const char *name, } } -printk (KERN_ERR "%s: no free DMA channel found\n" , __FUNCTION__); +printk (KERN_ERR "%s: no free DMA channel found\n" , __func__);return -ENODEV ; }
arch/arm/mach-imx/irq.c +3 -3
@@ -160,21 +160,21 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type)static void imx_gpio_ack_irq (unsigned int irq) { -DEBUG_IRQ ("%s: irq %d\n" , __FUNCTION__, irq); +DEBUG_IRQ ("%s: irq %d\n" , __func__, irq);ISR (IRQ_TO_REG (irq)) =1 << ((irq -IRQ_GPIOA (0 )) %32 ); }static void imx_gpio_mask_irq (unsigned int irq) { -DEBUG_IRQ ("%s: irq %d\n" , __FUNCTION__, irq); +DEBUG_IRQ ("%s: irq %d\n" , __func__, irq);IMR (IRQ_TO_REG (irq)) &= ~(1 << ((irq -IRQ_GPIOA (0 )) %32 )); }static void imx_gpio_unmask_irq (unsigned int irq) { -DEBUG_IRQ ("%s: irq %d\n" , __FUNCTION__, irq); +DEBUG_IRQ ("%s: irq %d\n" , __func__, irq);IMR (IRQ_TO_REG (irq)) |=1 << ((irq -IRQ_GPIOA (0 )) %32 ); }
arch/arm/mach-iop13xx/iq81340mc.c +1 -1
@@ -81,7 +81,7 @@ static void __init iq81340mc_init(void)static void __init iq81340mc_timer_init (void ) {unsigned long bus_freq =iop13xx_core_freq () /iop13xx_xsi_bus_ratio (); -printk (KERN_DEBUG "%s: bus frequency: %lu\n" , __FUNCTION__, bus_freq); +printk (KERN_DEBUG "%s: bus frequency: %lu\n" , __func__, bus_freq);iop_init_time (bus_freq); }
arch/arm/mach-iop13xx/iq81340sc.c +1 -1
@@ -83,7 +83,7 @@ static void __init iq81340sc_init(void)static void __init iq81340sc_timer_init (void ) {unsigned long bus_freq =iop13xx_core_freq () /iop13xx_xsi_bus_ratio (); -printk (KERN_DEBUG "%s: bus frequency: %lu\n" , __FUNCTION__, bus_freq); +printk (KERN_DEBUG "%s: bus frequency: %lu\n" , __func__, bus_freq);iop_init_time (bus_freq); }
arch/arm/mach-iop13xx/pci.c +4 -4
@@ -94,13 +94,13 @@ void iop13xx_map_pci_memory(void) , 0, iop13xx_atux_mem_size, MT_DEVICE);if (!iop13xx_atux_mem_base) {printk ("%s: atux allocation " -"failed\n" , __FUNCTION__); +"failed\n" , __func__);BUG (); } }else iop13xx_atux_mem_size =0 ;PRINTK ("%s: atu: %d bus_size: %d mem_base: %x\n" , - __FUNCTION__, atu, iop13xx_atux_mem_size, + __func__, atu, iop13xx_atux_mem_size, iop13xx_atux_mem_base);break ;case 1 :
@@ -120,13 +120,13 @@ void iop13xx_map_pci_memory(void) , 0, iop13xx_atue_mem_size, MT_DEVICE);if (!iop13xx_atue_mem_base) {printk ("%s: atue allocation " -"failed\n" , __FUNCTION__); +"failed\n" , __func__);BUG (); } }else iop13xx_atue_mem_size =0 ;PRINTK ("%s: atu: %d bus_size: %d mem_base: %x\n" , - __FUNCTION__, atu, iop13xx_atue_mem_size, + __func__, atu, iop13xx_atue_mem_size, iop13xx_atue_mem_base);break ; }
arch/arm/mach-iop13xx/setup.c +1 -1
@@ -519,7 +519,7 @@ void __init iop13xx_platform_init(void)if (iq8134x_flash_resource.end > iq8134x_flash_resource.start) iop13xx_devices[plat_idx++] = &iq8134x_flash;else -printk (KERN_ERR "%s: Failed to probe flash size\n" , __FUNCTION__); +printk (KERN_ERR "%s: Failed to probe flash size\n" , __func__);#endif platform_add_devices (iop13xx_devices, plat_idx);
arch/arm/mach-ixp4xx/common-pci.c +1 -1
@@ -87,7 +87,7 @@ static inline int check_master_abort(void)if (isr &PCI_ISR_PFE ) {/* make sure the Master Abort bit is reset */ *PCI_ISR =PCI_ISR_PFE ; -pr_debug ("%s failed\n" , __FUNCTION__); +pr_debug ("%s failed\n" , __func__);return 1 ; }
arch/arm/mach-ixp4xx/gtwx5715-pci.c +1 -1
@@ -65,7 +65,7 @@ static int __init gtwx5715_map_irq(struct pci_dev *dev, u8 slot, u8 pin)else rc = gtwx5715_irqmap[slot][pin-1 ]; -printk ("%s: Mapped slot %d pin %d to IRQ %d\n" , __FUNCTION__,slot, pin, rc); +printk ("%s: Mapped slot %d pin %d to IRQ %d\n" , __func__, slot, pin, rc);return (rc); }
arch/arm/mach-netx/generic.c +3 -3
@@ -133,7 +133,7 @@ netx_hif_ack_irq(unsigned int _irq) val &= ~((1 <<24 ) << irq);writel (val,NETX_DPMAS_INT_EN ); -DEBUG_IRQ ("%s: irq %d\n" , __FUNCTION__, _irq); +DEBUG_IRQ ("%s: irq %d\n" , __func__, _irq); } static void
@@ -145,7 +145,7 @@ netx_hif_mask_irq(unsigned int _irq) val =readl (NETX_DPMAS_INT_EN ); val &= ~((1 <<24 ) << irq);writel (val,NETX_DPMAS_INT_EN ); -DEBUG_IRQ ("%s: irq %d\n" , __FUNCTION__, _irq); +DEBUG_IRQ ("%s: irq %d\n" , __func__, _irq); } static void
@@ -157,7 +157,7 @@ netx_hif_unmask_irq(unsigned int _irq) val =readl (NETX_DPMAS_INT_EN ); val |= (1 <<24 ) << irq;writel (val,NETX_DPMAS_INT_EN ); -DEBUG_IRQ ("%s: irq %d\n" , __FUNCTION__, _irq); +DEBUG_IRQ ("%s: irq %d\n" , __func__, _irq); }static struct irq_chip netx_hif_chip = {
arch/arm/mach-orion/gpio.c +6 -6
@@ -36,7 +36,7 @@ int gpio_direction_input(unsigned pin)unsigned long flags;if (pin >=GPIO_MAX || !test_bit (pin, gpio_valid)) { -pr_debug ("%s: invalid GPIO %d\n" , __FUNCTION__, pin); +pr_debug ("%s: invalid GPIO %d\n" , __func__, pin);return -EINVAL ; }
@@ -62,7 +62,7 @@ int gpio_direction_output(unsigned pin, int value)int mask;if (pin >=GPIO_MAX || !test_bit (pin, gpio_valid)) { -pr_debug ("%s: invalid GPIO %d\n" , __FUNCTION__, pin); +pr_debug ("%s: invalid GPIO %d\n" , __func__, pin);return -EINVAL ; }
@@ -141,7 +141,7 @@ int gpio_request(unsigned pin, const char *label)unsigned long flags;if (pin >=GPIO_MAX || !test_bit (pin, gpio_valid)) { -pr_debug ("%s: invalid GPIO %d\n" , __FUNCTION__, pin); +pr_debug ("%s: invalid GPIO %d\n" , __func__, pin);return -EINVAL ; }
@@ -149,7 +149,7 @@ int gpio_request(unsigned pin, const char *label)if (gpio_label[pin]) {pr_debug ("%s: GPIO %d already used as %s\n" , - __FUNCTION__, pin, gpio_label[pin]); + __func__, pin, gpio_label[pin]); ret = -EBUSY ; }else gpio_label[pin] = label ? label :"?" ;
@@ -162,12 +162,12 @@ EXPORT_SYMBOL(gpio_request);void gpio_free (unsigned pin) {if (pin >=GPIO_MAX || !test_bit (pin, gpio_valid)) { -pr_debug ("%s: invalid GPIO %d\n" , __FUNCTION__, pin); +pr_debug ("%s: invalid GPIO %d\n" , __func__, pin);return ; }if (!gpio_label[pin]) -pr_warning ("%s: GPIO %d already freed\n" , __FUNCTION__, pin); +pr_warning ("%s: GPIO %d already freed\n" , __func__, pin);else gpio_label[pin] =NULL ; }
arch/arm/mach-pnx4008/clock.c +1 -1
@@ -976,7 +976,7 @@ static int __init clk_init(void) (*clkp)->set_parent ((*clkp), (*clkp)->parent); }pr_debug ("%s: clock %s, rate %ld\n" , - __FUNCTION__, (*clkp)->name, (*clkp)->rate); + __func__, (*clkp)->name, (*clkp)->rate); }local_clk_use (&ck_pll4);
arch/arm/mach-pnx4008/dma.c +1 -1
@@ -192,7 +192,7 @@ void pnx4008_free_channel(int ch)if (!dma_channels[ch].name) {printk (KERN_CRIT "%s: trying to free channel %d which is already freed\n" , - __FUNCTION__, ch); + __func__, ch);return ; }
arch/arm/mach-pxa/cm-x270-pci.c +1 -1
@@ -104,7 +104,7 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) {int irq; -dev_dbg (&dev->dev,"%s: slot=%x, pin=%x\n" , __FUNCTION__, slot, pin); +dev_dbg (&dev->dev,"%s: slot=%x, pin=%x\n" , __func__, slot, pin); irq =it8152_pci_map_irq (dev, slot, pin);if (irq)
arch/arm/mach-pxa/cm-x270.c +2 -2
@@ -504,11 +504,11 @@ static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)struct pxamci_platform_data *p_d = dev->platform_data;if ((1 << vdd) & p_d->ocr_mask) { -printk (KERN_DEBUG "%s: on\n" , __FUNCTION__); +printk (KERN_DEBUG "%s: on\n" , __func__);GPCR (105 ) =GPIO_bit (105 ); }else {GPSR (105 ) =GPIO_bit (105 ); -printk (KERN_DEBUG "%s: off\n" , __FUNCTION__); +printk (KERN_DEBUG "%s: off\n" , __func__); } }
arch/arm/mach-pxa/dma.c +1 -1
@@ -81,7 +81,7 @@ void pxa_free_dma (int dma_ch)if (!dma_channels[dma_ch].name) {printk (KERN_CRIT "%s: trying to free channel %d which is already freed\n" , - __FUNCTION__, dma_ch); + __func__, dma_ch);return ; }
arch/arm/mach-pxa/em-x270.c +1 -1
@@ -264,7 +264,7 @@ static int em_x270_mci_init(struct device *dev, "MMC card detect", data);if (err) {printk (KERN_ERR "%s: can't request MMC card detect IRQ: %d\n" , - __FUNCTION__, err); + __func__, err);return err; }
arch/arm/mach-pxa/mainstone.c +2 -2
@@ -390,11 +390,11 @@ static void mainstone_mci_setpower(struct device *dev, unsigned int vdd)struct pxamci_platform_data * p_d = dev->platform_data;if ((1 << vdd) & p_d->ocr_mask) { -printk (KERN_DEBUG "%s: on\n" , __FUNCTION__); +printk (KERN_DEBUG "%s: on\n" , __func__);MST_MSCWR1 |=MST_MSCWR1_MMC_ON ;MST_MSCWR1 &= ~MST_MSCWR1_MS_SEL ; }else { -printk (KERN_DEBUG "%s: off\n" , __FUNCTION__); +printk (KERN_DEBUG "%s: off\n" , __func__);MST_MSCWR1 &= ~MST_MSCWR1_MMC_ON ; } }
arch/arm/mach-pxa/trizeps4.c +4 -4
@@ -217,7 +217,7 @@ void board_pcmcia_power(int power) ConXS_BCR = trizeps_conxs_bcr; } -pr_debug ("%s: o%s 0x%x\n" , __FUNCTION__, power ?"n" :"ff" , trizeps_conxs_bcr); +pr_debug ("%s: o%s 0x%x\n" , __func__, power ?"n" :"ff" , trizeps_conxs_bcr); }/* backlight power switching for LCD panel */
@@ -228,7 +228,7 @@ static void board_backlight_power(int on) }else { trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP; } -pr_debug ("%s: o%s 0x%x\n" , __FUNCTION__, on ?"n" :"ff" , trizeps_conxs_bcr); +pr_debug ("%s: o%s 0x%x\n" , __func__, on ?"n" :"ff" , trizeps_conxs_bcr); ConXS_BCR = trizeps_conxs_bcr; }
@@ -238,10 +238,10 @@ static void board_mci_power(struct device *dev, unsigned int vdd)struct pxamci_platform_data * p_d = dev->platform_data;if ((1 << vdd) & p_d->ocr_mask) { -pr_debug ("%s: on\n" , __FUNCTION__); +pr_debug ("%s: on\n" , __func__);/* FIXME fill in values here */ }else { -pr_debug ("%s: off\n" , __FUNCTION__); +pr_debug ("%s: off\n" , __func__);/* FIXME fill in values here */ } }
arch/arm/mach-sa1100/badge4.c +3 -3
@@ -206,7 +206,7 @@ static int __init badge4_init(void)if (ret <0 )printk (KERN_ERR "%s: SA-1111 initialization failed (%d)\n" , - __FUNCTION__, ret); + __func__, ret);/* maybe turn on 5v0 from the start */
@@ -240,11 +240,11 @@ void badge4_set_5V(unsigned subsystem, int on)/* detect on->off and off->on transitions */ if ((!old_5V_bitmap) && (badge4_5V_bitmap)) {/* was off, now on */ -printk (KERN_INFO "%s: enabling 5V supply rail\n" , __FUNCTION__); +printk (KERN_INFO "%s: enabling 5V supply rail\n" , __func__);GPSR =BADGE4_GPIO_PCMEN5V ; }else if ((old_5V_bitmap) && (!badge4_5V_bitmap)) {/* was on, now off */ -printk (KERN_INFO "%s: disabling 5V supply rail\n" , __FUNCTION__); +printk (KERN_INFO "%s: disabling 5V supply rail\n" , __func__);GPCR =BADGE4_GPIO_PCMEN5V ; }
arch/arm/mach-sa1100/cpu-sa1100.c +1 -1
@@ -139,7 +139,7 @@ static void sa1100_update_dram_timings(int current_speed, int new_speed)if (settings->speed ==0 ) {panic ("%s: couldn't find dram setting for speed %d\n" , - __FUNCTION__, new_speed); + __func__, new_speed); }/* No risk, no fun: run with interrupts on! */
arch/arm/mach-sa1100/dma.c +4 -4
@@ -129,7 +129,7 @@ int sa1100_request_dma (dma_device_t device, const char *device_id,if (err) {printk (KERN_ERR "%s: unable to request IRQ %d for %s\n" , - __FUNCTION__,IRQ_DMA0 + i, device_id); + __func__,IRQ_DMA0 + i, device_id); dma->device =0 ;return err; }
@@ -165,12 +165,12 @@ void sa1100_free_dma(dma_regs_t *regs)if (regs == (dma_regs_t *)&DDAR (i))break ;if (i >=SA1100_DMA_CHANNELS ) { -printk (KERN_ERR "%s: bad DMA identifier\n" , __FUNCTION__); +printk (KERN_ERR "%s: bad DMA identifier\n" , __func__);return ; }if (!dma_chan[i].device) { -printk (KERN_ERR "%s: Trying to free free DMA\n" , __FUNCTION__); +printk (KERN_ERR "%s: Trying to free free DMA\n" , __func__);return ; }
@@ -329,7 +329,7 @@ void sa1100_reset_dma(dma_regs_t *regs)if (regs == (dma_regs_t *)&DDAR (i))break ;if (i >=SA1100_DMA_CHANNELS ) { -printk (KERN_ERR "%s: bad DMA identifier\n" , __FUNCTION__); +printk (KERN_ERR "%s: bad DMA identifier\n" , __func__);return ; }
arch/arm/mach-sa1100/h3600.c +7 -7
@@ -596,7 +596,7 @@ static void h3800_control_egpio(enum ipaq_egpio_type x, int setp)case IPAQ_EGPIO_CODEC_NRESET :case IPAQ_EGPIO_AUDIO_ON :case IPAQ_EGPIO_QMUTE : -printk ("%s: error - should not be called\n" , __FUNCTION__); +printk ("%s: error - should not be called\n" , __func__);break ;case IPAQ_EGPIO_OPT_NVRAM_ON :SET_ASIC2 (GPIO2_OPT_ON_NVRAM );
@@ -638,7 +638,7 @@ static int h3800_pm_callback(int req)static u16 asic2_data;int result =0 ; -printk ("%s %d\n" , __FUNCTION__, req); +printk ("%s %d\n" , __func__, req);switch (req) {case PM_RESUME :
@@ -666,7 +666,7 @@ static int h3800_pm_callback(int req) asic2_data =H3800_ASIC2_GPIOPIOD ;break ;default : -printk ("%s: unrecognized PM callback\n" , __FUNCTION__); +printk ("%s: unrecognized PM callback\n" , __func__);break ; }return result;
@@ -706,7 +706,7 @@ static void h3800_IRQ_demux(unsigned int irq, struct irq_desc *desc) {int i; -if (0 )printk ("%s: interrupt received\n" , __FUNCTION__); +if (0 )printk ("%s: interrupt received\n" , __func__); desc->chip->ack (irq);
@@ -716,21 +716,21 @@ static void h3800_IRQ_demux(unsigned int irq, struct irq_desc *desc)/* KPIO */ irq =H3800_ASIC2_KPIINTFLAG ; -if (0 )printk ("%s KPIO 0x%08X\n" , __FUNCTION__, irq); +if (0 )printk ("%s KPIO 0x%08X\n" , __func__, irq);for (j =0 ; j <H3800_KPIO_IRQ_COUNT ; j++)if (irq & kpio_irq_mask[j])handle_edge_irq (H3800_KPIO_IRQ_COUNT + j, irq_desc +H3800_KPIO_IRQ_COUNT + j);/* GPIO2 */ irq =H3800_ASIC2_GPIINTFLAG ; -if (0 )printk ("%s GPIO 0x%08X\n" , __FUNCTION__, irq); +if (0 )printk ("%s GPIO 0x%08X\n" , __func__, irq);for (j =0 ; j <H3800_GPIO_IRQ_COUNT ; j++)if (irq & gpio_irq_mask[j])handle_edge_irq (H3800_GPIO_IRQ_COUNT + j, irq_desc +H3800_GPIO_IRQ_COUNT + j); }if (i >=MAX_ASIC_ISR_LOOPS ) -printk ("%s: interrupt processing overrun\n" , __FUNCTION__); +printk ("%s: interrupt processing overrun\n" , __func__);/* For level-based interrupts */ desc->chip->unmask (irq);
arch/arm/plat-iop/pci.c +1 -1
@@ -371,7 +371,7 @@ static int __init iop3xx_init_atu_setup(char *str)default :printk (KERN_DEBUG "\"%s\" malformed at " "character: \'%c\'" , - __FUNCTION__, + __func__, *str); *(str +1 ) ='\0' ; }
arch/arm/plat-omap/dma.c +2 -2
@@ -137,7 +137,7 @@ static void omap_disable_channel_irq(int lch);static inline void omap_enable_channel_irq (int lch);#define REVISIT_24XX () printk(KERN_ERR "FIXME: no %s on 24xx\n", \ - __FUNCTION__); + __func__);#ifdef CONFIG_ARCH_OMAP15XX /* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
@@ -699,7 +699,7 @@ omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams)u32 reg;if (!cpu_class_is_omap2 ()) { -printk (KERN_ERR "FIXME: no %s on 15xx/16xx\n" , __FUNCTION__); +printk (KERN_ERR "FIXME: no %s on 15xx/16xx\n" , __func__);return ; }
arch/arm/plat-omap/dmtimer.c +1 -1
@@ -268,7 +268,7 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id)if (id <=0 || id > dm_timer_count || dm_timers[id-1 ].reserved) {spin_unlock_irqrestore (&dm_timer_lock, flags);printk ("BUG: warning at %s:%d/%s(): unable to get timer %d\n" , - __FILE__, __LINE__, __FUNCTION__, id); + __FILE__, __LINE__, __func__, id);dump_stack ();return NULL ; }
arch/arm/plat-s3c24xx/dma.c +32 -32
231 lines not on this page · raw message
Signature · 1 line
1.5.4.3.500.g83a2c