Kworld DVB-T 210 - dvb tuning problem
Hi Hartmut,
I noticed you had a bit to do with implementing this card.
With a fresh install of ubuntu 7.10 (kernel i386 2.6.22-14-generic), the card is auto recognised as: Kworld DVB-T 210 (card=114)
However, tda1004 firmware does not load.
Used download-firmware, placed dvb-fe-tda10046.fw
into /lib/firmware/2.6.22-14-generic
Rebooted.
Now, again card is recognised, firmware recognised as version 20. Here is the strange part:
- using dvb-utils scan, each time I run that I get a different result in channels.
- I try to scan with Kaffeine - nothing
- I try to scan with Me-tv - nothing
- I try to scan with tvtime - all channels obtained ( no audio).
Now, after reboot, if I first start tvtime (analog tv), view a channel, turn tvtime off, and then :
- if I place a previously good channels.dvb in Kaffeine - it plays all channels.
- if I place a previously good channels.conf in Me-tv - it plays all channels.
Would it be correct to say that the "switch" is not working for DVB after boot?
I have studied the code, but I need your help to point me in the right direction.
Thanks,
Tim
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb