Can't mount shares ending in $
Debug files available at http://www.mmcit.co.nz/debug.zip
I recently (about a month ago) upgraded to Fedora 8 (previously on
Fedora 6).
Autofs mounting of shares ending in $ worked on FC6. I think this is the first time I've tried since on Fedora 8.
I've got another Fedora 6 box and shares ending in $ still work ok on this box.
I've tried playing around with the auto.samba script I use but no luck. Output from it is:
RUN: auto.samba matthew
-fstype=cifs,username=mjurgens,password=parallel12 \
/cd "://matthew/cd" \
/C "://matthew/C" \
/G\$ "://matthew/G\$" \
/E "://matthew/E" \
/G "://matthew/G" \
/ADMIN\$ "://matthew/ADMIN\$" \
/C\$ "://matthew/C\$"(This is the exact same result as the Fedora6 box)
From the debug info, the mount command that fails is:
mount -t cifs -s -o username=USER,password=PASSWORD //matthew/C\$ /smb/matthew/C$ This works manually if I:
mount -t cifs -s -o username=USER,password=PASSWORD //matthew/C\$ /mnt/matthew The other share to the same location works fine through autofs:
mount -t cifs -s -o username=USER,password=PASSWORD //matthew/C /smb/matthew/C
Autofs Version = autofs-5.0.2-27
uname -r = 2.6.22.14-72.fc6PAE (I know its an FC6 kernel, everything else is FC8 and I've been running on this since the upgrade due to a problem with either mkintrd or nash)
Reference to an earlier problem with a fix to shares ending in $ where I got the map from:
http://www.mail-archive.com/[email protected]/msg05691.html
Ian Kent
maintainerQuoted 2 lines · Matthew Jurgens
From the debug info, the mount command that fails is:
mount -t cifs -s -o username=USER,password=PASSWORD //matthew/C\$ /smb/matthew/C$
Does this command work if you run it manually?
Ian
Before you sent this I installed the original Fedora 8 release of autofs (autofs-5.0.2-16). I had originally yum upgraded to Fedora 8 and so had installed the latest version autofs-5.0.2-27. I have found that autofs-5.0.2-16 works fine, but going to -27 breaks it.
And the answer to your question is:
With autofs running - no
With autofs stopped - no
With autofs stopped and when I mkdir /smb/matthew/C$ - yes
Quoted 13 lines · Ian Kent
Quoted 3 lines · Matthew Jurgens
From the debug info, the mount command that fails is:
mount -t cifs -s -o username=USER,password=PASSWORD //matthew/C\$ /smb/matthew/C$Does this command work if you run it manually?
Ian
_______________________________________________
autofs mailing list
[email protected]
http://linux.kernel.org/mailman/listinfo/autofs
Before you sent this I installed the original Fedora 8 release of autofs (autofs-5.0.2-16). I had originally yum upgraded to Fedora 8 and so had been running on the latest version autofs-5.0.2-27. I have found that autofs-5.0.2-16 works fine, but going to -27 breaks it.
And the answer to your question, back on -27 version, is:
With autofs running - no
With autofs stopped - no
With autofs stopped and when I mkdir /smb/matthew/C$ - yes
Quoted 13 lines · Ian Kent
Quoted 3 lines · Matthew Jurgens
From the debug info, the mount command that fails is:
mount -t cifs -s -o username=USER,password=PASSWORD //matthew/C\$ /smb/matthew/C$Does this command work if you run it manually?
Ian
_______________________________________________
autofs mailing list
[email protected]
http://linux.kernel.org/mailman/listinfo/autofs
Hi Ian
For some reason, most of the messages I post to the list never show up - no idea why - so this time I am putting you on the receipt list as well - my reply is below. Thanks for you work on this product.
Before you sent this I installed the original Fedora 8 release of autofs (autofs-5.0.2-16). I had originally yum upgraded to Fedora 8 and so had been running on the latest version autofs-5.0.2-27. I have found that autofs-5.0.2-16 works fine, but going to -27 breaks it.
And the answer to your question, back on -27 version, is:
With autofs running - no
With autofs stopped - no
With autofs stopped and when I mkdir /smb/matthew/C$ - yes
Quoted 13 lines · Ian Kent
Quoted 3 lines · Matthew Jurgens
From the debug info, the mount command that fails is:
mount -t cifs -s -o username=USER,password=PASSWORD //matthew/C\$ /smb/matthew/C$Does this command work if you run it manually?
Ian
_______________________________________________
autofs mailing list
[email protected]
http://linux.kernel.org/mailman/listinfo/autofs
Ian Kent
maintainerQuoted 15 lines · Matthew Jurgens
Hi Ian
For some reason, most of the messages I post to the list never show up
- no idea why - so this time I am putting you on the receipt list as well - my reply is below. Thanks for you work on this product.Before you sent this I installed the original Fedora 8 release of autofs (autofs-5.0.2-16).
I had originally yum upgraded to Fedora 8 and so had been running on the latest version autofs-5.0.2-27.
I have found that autofs-5.0.2-16 works fine, but going to -27 breaks it.
Quoted 4 lines
And the answer to your question, back on -27 version, is:
With autofs running - no
With autofs stopped - no
With autofs stopped and when I mkdir /smb/matthew/C$ - yes
What I'm really after here is to find out whether the cifs mount is choking on the unescaped $ in /smb/matthew/C$.
Quoted 15 lines
Quoted 13 lines · Ian Kent
Quoted 3 lines · Matthew Jurgens
From the debug info, the mount command that fails is:
mount -t cifs -s -o username=USER,password=PASSWORD //matthew/C\$ /smb/matthew/C$Does this command work if you run it manually?
Ian
So, no it handles mounting with the unescaped $
It seems to be something broken when going from
autofs-5.0.2-16 to autofs-5.0.2-27
which I also imagine will be broken in future releases.
Any ideas?
Quoted 11 lines
Quoted 5 lines
And the answer to your question, back on -27 version, is:
With autofs running - no
With autofs stopped - no
With autofs stopped and when I mkdir /smb/matthew/C$ - yesWhat I'm really after here is to find out whether the cifs mount is choking on the unescaped $ in /smb/matthew/C$.
_______________________________________________
autofs mailing list
[email protected]
http://linux.kernel.org/mailman/listinfo/autofs
Ian Kent
maintainerQuoted 3 lines · Matthew Jurgens
So, no it handles mounting with the unescaped $
It seems to be something broken when going from
autofs-5.0.2-16 to autofs-5.0.2-27
Any chance of getting a debug log from autofs-5.0.2-16?
Ian
debug for successful mount of C$ share for autofs-5.0.2-16 available at http://www.mmcit.co.nz/autofs-5.0.2-16.debug.zip
Quoted 13 lines · Ian Kent
Quoted 3 lines · Matthew Jurgens
So, no it handles mounting with the unescaped $
It seems to be something broken when going from autofs-5.0.2-16 to autofs-5.0.2-27Any chance of getting a debug log from autofs-5.0.2-16?
Ian
_______________________________________________
autofs mailing list
[email protected]
http://linux.kernel.org/mailman/listinfo/autofs
I inadvertently "upgraded" to v5.0.2-29 and found that it also has the same problem - where the debug logs shows a mount command that works manually but not when executed by autofs - maybe the mount points are not getting created correctly?
Quoted 17 lines · Matthew Jurgens
debug for successful mount of C$ share for autofs-5.0.2-16 available at http://www.mmcit.co.nz/autofs-5.0.2-16.debug.zip
Quoted 13 lines · Ian Kent
Quoted 3 lines · Matthew Jurgens
So, no it handles mounting with the unescaped $
It seems to be something broken when going from autofs-5.0.2-16 to autofs-5.0.2-27Any chance of getting a debug log from autofs-5.0.2-16?
Ian
_______________________________________________
autofs mailing list
[email protected]
http://linux.kernel.org/mailman/listinfo/autofs