Skip to contentSkip to conversation

Oprofile kvmppc - mini howto and

kvm-ppc-devel Josh Boyer 1 participant 1 message Apr 4, 2008

lore
Share & tools
lore

Josh Boyer

author
#0 lore raw
Quoted 11 lines · Hollis Blanchard
Quoted 10 lines · On Friday 04 April 2008 06:01:41 Christian Ehrhardt wrote:

Note the bad thing, atm oprofile on ppc440 seems not to have hw perf counters available. Therefore it is covered with the fallback timer-interrupt. But this has drawbacks: =>from the oprfile info page:
"In 2.6 kernels on CPUs without OProfile support for the hardware performance counters, the driver falls back to using the timer interrupt for profiling. Like the RTC mode in 2.4 kernels, this is not able to profile code that has interrupts disabled. Note that there are no configuration parameters for setting this, unlike the RTC and hardware performance counter setup."

Quoted 6 lines
Quoted 4 lines

So oprofile works but without real cpu perf counters it will be nearly useless, because we have interrupts disabled in most code we want to profile. I need to look out for some beta support (or write my own) for ppc440 cpu perf counters to enable that for us :(

I don't see any performance counters in the 440 user manuals.

There aren't any that I'm aware of. The only performance monitor I've seen on 440 chip is for the PLB, and I don't believe that is useful for your purposes.

josh

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
kvm-ppc-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/kvm-ppc-devel