Skip to contentSkip to conversation

mpc83xx: Update DIMM data bus width test to support 40-bit width

PATCH New Lee Nipper 1 participant 1 message Apr 10, 2008

lore
Share & tools
lore

Lee Nipper

author
#0 lore raw

PATCH 1/1 mpc83xx: Update DIMM data bus width test to support 40-bit width

32-bit wide ECC memory modules report 40-bit width.
Changed the DIMM data bus width test to 'less than 64' instead of 'equal 32'.

Signed-off-by Lee Nipper <[email protected]>
---
 cpu/mpc83xx/spd_sdram.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)
cpu/mpc83xx/spd_sdram.c +2 -2
index 0acca47..4ad5a3f 100644
@@ -598,7 +598,7 @@ long int spd_sdram()
 	debug("DDR:timing_cfg_2=0x%08x\n", ddr->timing_cfg_2);
 
 	/* Check DIMM data bus width */
-	if (spd.dataw_lsb == 0x20) {
+	if (spd.dataw_lsb < 64) {
 		if (spd.mem_type == SPD_MEMTYPE_DDR)
 			burstlen = 0x03; /* 32 bit data bus, burst len is 8 */
 		else

@@ -760,7 +760,7 @@ long int spd_sdram()
 		sdram_cfg |= SDRAM_CFG_RD_EN;
 
 	/* The DIMM is 32bit width */
-	if (spd.dataw_lsb == 0x20) {
+	if (spd.dataw_lsb < 64) {
 		if (spd.mem_type == SPD_MEMTYPE_DDR)
 			sdram_cfg |= SDRAM_CFG_32_BE | SDRAM_CFG_8_BE;
 		if (spd.mem_type == SPD_MEMTYPE_DDR2)
Signature · 1 line
1.5.4.2