ata_piix: add Asus Eee 701 controller to short cable list

The drive is directly soldered to the controller, so there is no cable at all. Remove the 40-wire assumption so the drive can operate at max speed.

Before patch:

$ dd if=/dev/sda of=/dev/null bs=2M count=64 iflag=direct
134217728 bytes (134 MB) copied, 5.29612 s, 25.3 MB/s

After patch:

$ dd if=/dev/sda of=/dev/null bs=2M count=64 iflag=direct
134217728 bytes (134 MB) copied, 3.94955 s, 34.0 MB/s

---

I sent this to the linux-kernel ML earlier along with what seemed to be the maintainer from recent git-log, but I failed at reading the comments at the top of the file, so I'm resending it to you guys too. Sorry about that.

Original Message-Id: <[email protected]>

-Dan

 drivers/ata/ata_piix.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

index b7c38ee..ea2c764 100644
@@ -573,6 +573,7 @@ static const struct ich_laptop ich_laptop[] = {
 	{ 0x27DF, 0x1043, 0x1267 },	/* ICH7 on Asus W5F */
 	{ 0x27DF, 0x103C, 0x30A1 },	/* ICH7 on HP Compaq nc2400 */
 	{ 0x24CA, 0x1025, 0x0061 },	/* ICH4 on ACER Aspire 2023WLMi */
+	{ 0x2653, 0x1043, 0x82D8 },	/* ICH6M on Asus Eee 701 */
 	/* end marker */
 	{ 0, }
 };

1.5.5.1