Blackfin I2C Driver: since only a few Blackfins lack TWI, just list them in the depends string
PATCH 1/1 Blackfin I2C Driver: since only a few Blackfins lack TWI, just list them in the depends string
From: Mike Frysinger <[email protected]>
--- drivers/i2c/busses/Kconfig | 5 ++--- 1 files changed, 2 insertions(+), 3 deletions(-)
drivers/i2c/busses/Kconfig +2 -3
@@ -101,10 +101,9 @@ config I2C_AU1550 config I2C_BLACKFIN_TWI tristate "Blackfin TWI I2C support" depends on BLACKFIN + depends on !BF561 && !BF531 && !BF532 && !BF533 help - This is the TWI I2C device driver for Blackfin BF522, BF525, - BF527, BF534, BF536, BF537 and BF54x. For other Blackfin processors, - please don't use this driver. + This is the I2C device driver for Blackfin on-chip TWI interface. This driver can also be built as a module. If so, the module will be called i2c-bfin-twi.
Signature · 6 lines
1.5.5 _______________________________________________ i2c mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/i2c
A message that is not in the archive (sent off-list or not yet received): 1210565911-4633-1-git-send-email-cooloney-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
Jean Delvare
AppliedQuoted 15 lines · Bryan Wu
From: Mike Frysinger <[email protected]>
Signed-off-by Mike Frysinger <[email protected]>Signed-off-by Bryan Wu <[email protected]>--- drivers/i2c/busses/Kconfig | 5 ++--- 1 files changed, 2 insertions(+), 3 deletions(-)drivers/i2c/busses/Kconfig +0
-0@@ -101,10 +101,9 @@ config I2C_AU1550 config I2C_BLACKFIN_TWI tristate "Blackfin TWI I2C support"
drivers/i2c/busses/Kconfig config I2C_AU1550 · line 109
Quoted 10 lines
drivers/i2c/busses/Kconfig +2
-3depends on BLACKFIN + depends on !BF561 && !BF531 && !BF532 && !BF533 help - This is the TWI I2C device driver for Blackfin BF522, BF525, - BF527, BF534, BF536, BF537 and BF54x. For other Blackfin processors, - please don't use this driver. + This is the I2C device driver for Blackfin on-chip TWI interface. This driver can also be built as a module. If so, the module will be called i2c-bfin-twi.
Applied, thanks. I've additionally changed "I2C device driver" to "I2C bus driver" for clarity.
Signature · 6 lines
Jean Delvare _______________________________________________ i2c mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/i2c
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 25 lines · Jean Delvare
Quoted 23 lines · Bryan Wu
From: Mike Frysinger <[email protected]>
Signed-off-by Mike Frysinger <[email protected]>Signed-off-by Bryan Wu <[email protected]>--- drivers/i2c/busses/Kconfig | 5 ++--- 1 files changed, 2 insertions(+), 3 deletions(-)drivers/i2c/busses/Kconfig +2
-3@@ -101,10 +101,9 @@ config I2C_AU1550 config I2C_BLACKFIN_TWI tristate "Blackfin TWI I2C support" depends on BLACKFIN + depends on !BF561 && !BF531 && !BF532 && !BF533 help - This is the TWI I2C device driver for Blackfin BF522, BF525, - BF527, BF534, BF536, BF537 and BF54x. For other Blackfin processors, - please don't use this driver. + This is the I2C device driver for Blackfin on-chip TWI interface.
Quoted 6 lines
drivers/i2c/busses/Kconfig config I2C_AU1550 · line 109
Quoted 2 lines
drivers/i2c/busses/Kconfig +0
-0This driver can also be built as a module. If so, the module will be called i2c-bfin-twi.Applied, thanks. I've additionally changed "I2C device driver" to "I2C bus driver" for clarity.
No problem. Thanks
-Bryan
_______________________________________________
i2c mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/i2c