b43: use the bitrev helpers rather than rolling a private one

The 4-bit reversal flip_4bit is replaced with the bitrev helper bitrev8 and a 4-bit shift. The B43_WARN is moved to the location where a register is read from for checking there. The other caller explicitly passes an array index which is guaranteed to be within range and so a B43_WARN is not added there.

Signed-off-by Harvey Harrison <[email protected]>

drivers/net/wireless/b43/phy.c +2 -1

@@ -3069,13 +3053,13 @@ b43_radio_interference_mitigation_enable(struct b43_wldev *dev, int mode)
 		}
 		radio_stacksave(0x0078);
 		tmp = (b43_radio_read16(dev, 0x0078) & 0x001E);
-		flipped = flip_4bit(tmp);
+		B43_WARN_ON(tmp > 15);
+		flipped = bitrev8(tmp) >> 4;
 		if (flipped < 10 && flipped >= 8)

Quoted 7 lines · On Tuesday 13 May 2008 21:55:18 Harvey Harrison wrote:

The 4-bit reversal flip_4bit is replaced with the bitrev helper bitrev8 and a 4-bit shift. The B43_WARN is moved to the location where a register is read from for checking there. The other caller explicitly passes an array index which is guaranteed to be within range and so a B43_WARN is not added there.

Signed-off-by Harvey Harrison <[email protected]>

ACK

But I'd prefer if we had something like the following and use that:

#define bitrev4(x) (bitrev8(x) >> 4)

This way the confusing (confusing to me :) ) shifts in the code would go away. I have a hard time realizing that
bitrev8(x) >> 3
does actually mean
bitrev4(x) << 1
Maybe I'm just stupid, though. :)

Quoted 14 lines · Michael Buesch

Quoted 7 lines · On Tuesday 13 May 2008 21:55:18 Harvey Harrison wrote:

The 4-bit reversal flip_4bit is replaced with the bitrev helper bitrev8 and a 4-bit shift. The B43_WARN is moved to the location where a register is read from for checking there. The other caller explicitly passes an array index which is guaranteed to be within range and so a B43_WARN is not added there.

Signed-off-by Harvey Harrison <[email protected]>

ACK

But I'd prefer if we had something like the following and use that:

Quoted 9 lines

#define bitrev4(x) (bitrev8(x) >> 4)

This way the confusing (confusing to me :) ) shifts in the code would go away. I have a hard time realizing that
bitrev8(x) >> 3
does actually mean
bitrev4(x) << 1
Maybe I'm just stupid, though. :)

You're not, this was only valid because x < 16....if bit 4 could be set this doesn't work anymore as bitrev8(x) >> 4 would truncate bit 4 before shifting left. So there was some subtlety here that makes >> 3 ok.

Do you want an incremental patch adding a bitrev4 to phy.c or are you going to add it?

The 4-bit reversal flip_4bit is replaced with the bitrev helper bitrev8 and a 4-bit shift. The B43_WARN is moved to the location where a register is read from for checking there. The other caller explicitly passes an array index which is guaranteed to be within range and so a B43_WARN is not added there.

Signed-off-by Harvey Harrison <[email protected]>

---
 drivers/net/wireless/b43/phy.c |   27 ++++++---------------------
 1 files changed, 6 insertions(+), 21 deletions(-)

drivers/net/wireless/b43/phy.c +6 -21

index de024dc..feea79f 100644
@@ -28,6 +28,7 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/types.h>
+#include <linux/bitrev.h>
 
 #include "b43.h"
 #include "phy.h"

@@ -83,25 +84,9 @@ const u8 b43_radio_channel_codes_bg[] = {
 	72, 84,
 };
 
+#define bitrev4(tmp) (bitrev8(tmp) >> 4)
 static void b43_phy_initg(struct b43_wldev *dev);
 
-/* Reverse the bits of a 4bit value.
- * Example:  1101 is flipped 1011
- */
-static u16 flip_4bit(u16 value)
-{
-	u16 flipped = 0x0000;
-
-	B43_WARN_ON(value & ~0x000F);
-
-	flipped |= (value & 0x0001) << 3;
-	flipped |= (value & 0x0002) << 1;
-	flipped |= (value & 0x0004) >> 1;
-	flipped |= (value & 0x0008) >> 3;
-
-	return flipped;
-}
-
 static void generate_rfatt_list(struct b43_wldev *dev,
 				struct b43_rfatt_list *list)
 {

@@ -3069,13 +3054,13 @@ b43_radio_interference_mitigation_enable(struct b43_wldev *dev, int mode)
 		}
 		radio_stacksave(0x0078);
 		tmp = (b43_radio_read16(dev, 0x0078) & 0x001E);
-		flipped = flip_4bit(tmp);
+		B43_WARN_ON(tmp > 15);
+		flipped = bitrev4(tmp);
 		if (flipped < 10 && flipped >= 8)
 			flipped = 7;
 		else if (flipped >= 10)
 			flipped -= 3;
-		flipped = flip_4bit(flipped);
-		flipped = (flipped << 1) | 0x0020;
+		flipped = (bitrev4(flipped) << 1) | 0x0020;
 		b43_radio_write16(dev, 0x0078, flipped);
 
 		b43_calc_nrssi_threshold(dev);

@@ -3708,7 +3693,7 @@ u16 b43_radio_init2050(struct b43_wldev *dev)
 	tmp1 >>= 9;
 
 	for (i = 0; i < 16; i++) {
-		radio78 = ((flip_4bit(i) << 1) | 0x20);
+		radio78 = (bitrev4(i) << 1) | 0x0020;
 		b43_radio_write16(dev, 0x78, radio78);
 		udelay(10);
 		for (j = 0; j < 16; j++) {

Quoted 7 lines · On Wednesday 14 May 2008 03:13:35 Harvey Harrison wrote:

The 4-bit reversal flip_4bit is replaced with the bitrev helper bitrev8 and a 4-bit shift. The B43_WARN is moved to the location where a register is read from for checking there. The other caller explicitly passes an array index which is guaranteed to be within range and so a B43_WARN is not added there.

Signed-off-by Harvey Harrison <[email protected]>

Reviewed-off-by Michael Buesch <[email protected]>

Quoted 70 lines

---
 drivers/net/wireless/b43/phy.c |   27 ++++++---------------------
 1 files changed, 6 insertions(+), 21 deletions(-)

drivers/net/wireless/b43/phy.c +6 -21

index de024dc..feea79f 100644
@@ -28,6 +28,7 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/types.h>
+#include <linux/bitrev.h>
 
 #include "b43.h"
 #include "phy.h"

@@ -83,25 +84,9 @@ const u8 b43_radio_channel_codes_bg[] = {
 	72, 84,
 };
 
+#define bitrev4(tmp) (bitrev8(tmp) >> 4)
 static void b43_phy_initg(struct b43_wldev *dev);
 
-/* Reverse the bits of a 4bit value.
- * Example:  1101 is flipped 1011
- */
-static u16 flip_4bit(u16 value)
-{
-	u16 flipped = 0x0000;
-
-	B43_WARN_ON(value & ~0x000F);
-
-	flipped |= (value & 0x0001) << 3;
-	flipped |= (value & 0x0002) << 1;
-	flipped |= (value & 0x0004) >> 1;
-	flipped |= (value & 0x0008) >> 3;
-
-	return flipped;
-}
-
 static void generate_rfatt_list(struct b43_wldev *dev,
 				struct b43_rfatt_list *list)
 {

@@ -3069,13 +3054,13 @@ b43_radio_interference_mitigation_enable(struct b43_wldev *dev, int mode)
 		}
 		radio_stacksave(0x0078);
 		tmp = (b43_radio_read16(dev, 0x0078) & 0x001E);
-		flipped = flip_4bit(tmp);
+		B43_WARN_ON(tmp > 15);
+		flipped = bitrev4(tmp);
 		if (flipped < 10 && flipped >= 8)
 			flipped = 7;
 		else if (flipped >= 10)
 			flipped -= 3;
-		flipped = flip_4bit(flipped);
-		flipped = (flipped << 1) | 0x0020;
+		flipped = (bitrev4(flipped) << 1) | 0x0020;
 		b43_radio_write16(dev, 0x0078, flipped);
 
 		b43_calc_nrssi_threshold(dev);

@@ -3708,7 +3693,7 @@ u16 b43_radio_init2050(struct b43_wldev *dev)
 	tmp1 >>= 9;
 
 	for (i = 0; i < 16; i++) {
-		radio78 = ((flip_4bit(i) << 1) | 0x20);
+		radio78 = (bitrev4(i) << 1) | 0x0020;
 		b43_radio_write16(dev, 0x78, radio78);
 		udelay(10);
 		for (j = 0; j < 16; j++) {