Skip to contentSkip to conversation

26-rc5+git hang on boot bluetooth hidd/hid_devices

DISCUSSION Soeren Sonnenburg 3 participants 8 messages Jun 9, 2008 – Jun 12, 2008

lore
Share & tools
lore
#0 lore raw

Hi,

updating to 2.6.26-rc5+git I recognize that debian sid suddenly hangs on boot when bluetooth is activated. The last message I see is starting hidd/hid_devices. And well 2.6.24/25 boot.

Does anybody else observe this? Any ideas?

Soeren

#1 lore raw

Hi Soeren,

Quoted 5 lines

updating to 2.6.26-rc5+git I recognize that debian sid suddenly hangs on boot when bluetooth is activated. The last message I see is starting hidd/hid_devices. And well 2.6.24/25 boot.

Does anybody else observe this? Any ideas?

is HID2HCI switching utility on? Do you have a HID proxy adapter in your system? If yes, then it is actually an USB issue.

Regards

Marcel

#2 lore raw
Quoted 10 lines · Marcel Holtmann

Hi Soeren,

Quoted 5 lines

updating to 2.6.26-rc5+git I recognize that debian sid suddenly hangs on boot when bluetooth is activated. The last message I see is starting hidd/hid_devices. And well 2.6.24/25 boot.

Does anybody else observe this? Any ideas?

is HID2HCI switching utility on? Do you have a HID proxy adapter in your system? If yes, then it is actually an USB issue.

yes hid2hci is on as this system is a macbookpro that tends to forget that it has internal bluetooth after resume (if resume even works)

Soeren

#3 lore raw

Hi Soeren,

Quoted 11 lines
Quoted 8 lines
Quoted 5 lines

updating to 2.6.26-rc5+git I recognize that debian sid suddenly hangs on boot when bluetooth is activated. The last message I see is starting hidd/hid_devices. And well 2.6.24/25 boot.

Does anybody else observe this? Any ideas?

is HID2HCI switching utility on? Do you have a HID proxy adapter in your system? If yes, then it is actually an USB issue.

yes hid2hci is on as this system is a macbookpro that tends to forget that it has internal bluetooth after resume (if resume even works)

then please disable hid2hci and see if it still has a problem and report this to the USB guys.

Regards

Marcel

#4 lore raw
Quoted 8 lines · Marcel Holtmann

Hi Soeren,

Quoted 6 lines
Quoted 6 lines
Quoted 5 lines

updating to 2.6.26-rc5+git I recognize that debian sid suddenly hangs on boot when bluetooth is activated. The last message I see is starting hidd/hid_devices. And well 2.6.24/25 boot.

Does anybody else observe this? Any ideas?

Quoted 8 lines
Quoted 5 lines
Quoted 2 lines

is HID2HCI switching utility on? Do you have a HID proxy adapter in your system? If yes, then it is actually an USB issue.

yes hid2hci is on as this system is a macbookpro that tends to forget that it has internal bluetooth after resume (if resume even works)

then please disable hid2hci and see if it still has a problem and report this to the USB guys.

Indeed when I disable the call to hid2hci it boots through. While booting I see another (unrelated?) oops (see below).

When I after booting call hid2hci in a terminal it simply hangs.

PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: STAC922x, Apple subsys_id=106b0200

BUG: unable to handle kernel paging request at f888c000
IP: [<f883b115>] :isight_firmware:isight_firmware_load+0x105/0x240
*pde = 37804067 *pte = 00000000 
Oops: 0000 [#1] PREEMPT SMP 
Modules linked in: snd_hda_intel snd_pcm_oss snd_mixer_oss i2c_i801 isight_firmware(+) snd_pcm snd_timer appletouch snd sky2 soundcore snd_page_alloc evdev

Pid: 964, comm: modprobe Not tainted (2.6.26-rc5-sonne #28)
EIP: 0060:[<f883b115>] EFLAGS: 00010207 CPU: 0
EIP is at isight_firmware_load+0x105/0x240 [isight_firmware]
EAX: f71e0f00 EBX: f888bff3 ECX: 00000009 EDX: f71e0f00
ESI: f888bfff EDI: f71e0f0c EBP: f7191d40 ESP: f7191cfc
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process modprobe (pid: 964, ti=f7190000 task=f707d390 task.ti=f7190000)

Stack: 00000040 000092fa 00000000 f71e0f00 00000032 0000012c 0000fa87 0000932c 
       f7b6c45c f7b6c400 00000032 f71e0f00 b48dffff f71f60e0 00000000 f7bd6400 
       f883b7e0 f7191d68 c03315dc 00000000 f7bd641c f7bd6494 f883b760 f7b6c400 
Call Trace:
 [<c03315dc>] ? usb_probe_interface+0xac/0x120
 [<c02e9b98>] ? driver_probe_device+0x88/0x1a0
 [<c01ceeab>] ? sysfs_create_dir+0x2b/0x50
 [<c02e9d29>] ? __driver_attach+0x79/0x80
 [<c02e94b3>] ? bus_for_each_dev+0x53/0x80
 [<c02e9a29>] ? driver_attach+0x19/0x20
 [<c02e9cb0>] ? __driver_attach+0x0/0x80
 [<c02e8e6f>] ? bus_add_driver+0x1bf/0x240
 [<c02e9ec9>] ? driver_register+0x69/0x150
 [<c0124c64>] ? try_to_wake_up+0x74/0x200
 [<c033188c>] ? usb_register_driver+0x7c/0x100
 [<f8843017>] ? isight_firmware_init+0x17/0x19 [isight_firmware]
 [<c0153965>] ? sys_init_module+0x115/0x1ca0
 [<c02002e5>] ? ext3_dirty_inode+0x55/0x80
 [<c0182300>] ? __kmalloc+0x0/0xe0
 [<c01032d1>] ? sysenter_past_esp+0x6a/0x91
 =======================
Code: b5 83 7d d4 32 bf 32 00 00 00 ba d0 00 00 00 89 de 0f 4e 7d d4 89 f8 89 7d e4 e8 f7 71 94 c7 89 f9 c1 e9 02 89 c2 89 45 e8 89 d7 <f3> a5 8b 4d e4 83 e1 03 74 02 f3 a4 8b 45 e0 b9 a0 00 00 00 8b 
EIP: [<f883b115>] isight_firmware_load+0x105/0x240 [isight_firmware] SS:ESP 0068:f7191cfc
---[ end trace 8ea9a3ecbcdbff55 ]---

Soeren

#5 lore raw
Quoted 64 lines · Soeren Sonnenburg
Quoted 8 lines · Marcel Holtmann

Hi Soeren,

Quoted 6 lines
Quoted 6 lines
Quoted 5 lines

updating to 2.6.26-rc5+git I recognize that debian sid suddenly hangs on boot when bluetooth is activated. The last message I see is starting hidd/hid_devices. And well 2.6.24/25 boot.

Does anybody else observe this? Any ideas?

Quoted 8 lines
Quoted 5 lines
Quoted 2 lines

is HID2HCI switching utility on? Do you have a HID proxy adapter in your system? If yes, then it is actually an USB issue.

yes hid2hci is on as this system is a macbookpro that tends to forget that it has internal bluetooth after resume (if resume even works)

then please disable hid2hci and see if it still has a problem and report this to the USB guys.

Indeed when I disable the call to hid2hci it boots through. While booting I see another (unrelated?) oops (see below).

When I after booting call hid2hci in a terminal it simply hangs.

PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: STAC922x, Apple subsys_id=106b0200

BUG: unable to handle kernel paging request at f888c000
IP: [<f883b115>] :isight_firmware:isight_firmware_load+0x105/0x240
*pde = 37804067 *pte = 00000000
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: snd_hda_intel snd_pcm_oss snd_mixer_oss i2c_i801 isight_firmware(+) snd_pcm snd_timer appletouch snd sky2 soundcore snd_page_alloc evdev

Pid: 964, comm: modprobe Not tainted (2.6.26-rc5-sonne #28)
EIP: 0060:[<f883b115>] EFLAGS: 00010207 CPU: 0
EIP is at isight_firmware_load+0x105/0x240 [isight_firmware]
EAX: f71e0f00 EBX: f888bff3 ECX: 00000009 EDX: f71e0f00
ESI: f888bfff EDI: f71e0f0c EBP: f7191d40 ESP: f7191cfc
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process modprobe (pid: 964, ti=f7190000 task=f707d390 task.ti=f7190000)

Stack: 00000040 000092fa 00000000 f71e0f00 00000032 0000012c 0000fa87 0000932c
      f7b6c45c f7b6c400 00000032 f71e0f00 b48dffff f71f60e0 00000000 f7bd6400
      f883b7e0 f7191d68 c03315dc 00000000 f7bd641c f7bd6494 f883b760 f7b6c400
Call Trace:
 [<c03315dc>] ? usb_probe_interface+0xac/0x120
 [<c02e9b98>] ? driver_probe_device+0x88/0x1a0
 [<c01ceeab>] ? sysfs_create_dir+0x2b/0x50
 [<c02e9d29>] ? __driver_attach+0x79/0x80
 [<c02e94b3>] ? bus_for_each_dev+0x53/0x80
 [<c02e9a29>] ? driver_attach+0x19/0x20
 [<c02e9cb0>] ? __driver_attach+0x0/0x80
 [<c02e8e6f>] ? bus_add_driver+0x1bf/0x240
 [<c02e9ec9>] ? driver_register+0x69/0x150
 [<c0124c64>] ? try_to_wake_up+0x74/0x200
 [<c033188c>] ? usb_register_driver+0x7c/0x100
 [<f8843017>] ? isight_firmware_init+0x17/0x19 [isight_firmware]
 [<c0153965>] ? sys_init_module+0x115/0x1ca0
 [<c02002e5>] ? ext3_dirty_inode+0x55/0x80
 [<c0182300>] ? __kmalloc+0x0/0xe0
 [<c01032d1>] ? sysenter_past_esp+0x6a/0x91
 =======================
Code: b5 83 7d d4 32 bf 32 00 00 00 ba d0 00 00 00 89 de 0f 4e 7d d4 89 f8 89 7d e4 e8 f7 71 94 c7 89 f9 c1 e9 02 89 c2 89 45 e8 89 d7 <f3> a5 8b 4d e4 83 e1 03 74 02 f3 a4 8b 45 e0 b9 a0 00 00 00 8b
EIP: [<f883b115>] isight_firmware_load+0x105/0x240 [isight_firmware] SS:ESP 0068:f7191cfc
---[ end trace 8ea9a3ecbcdbff55 ]---
Quoted 7 lines

Soeren
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Sounds like you might be having the same issue I was having with isight_firmware here is the link to the patch: http://lkml.org/lkml/2008/6/6/407
check and make sure, from what I could tell they look similar. regards;

Signature · 1 line
Justin P. Mattock
#6 lore raw
Quoted 8 lines · Justin Mattock
Quoted 4 lines · Soeren Sonnenburg
Quoted 3 lines · Marcel Holtmann

Hi Soeren,

Quoted 1 line
Quoted 1 line
Quoted 1 line

updating to 2.6.26-rc5+git I recognize that debian sid

suddenly hangs on

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

boot when bluetooth is activated. The last message I see is

[...]

Quoted 7 lines
Quoted 7 lines
Quoted 2 lines

then please disable hid2hci and see if it still has a problem and report this to the USB guys.

Indeed when I disable the call to hid2hci it boots through. While booting I see another (unrelated?) oops (see below).

When I after booting call hid2hci in a terminal it simply hangs.

[...]

Quoted 8 lines
Quoted 3 lines
Code: b5 83 7d d4 32 bf 32 00 00 00 ba d0 00 00 00 89 de 0f 4e 7d d4 89 f8 89 7d e4 e8 f7 71 94 c7 89 f9 c1 e9 02 89 c2 89 45 e8 89 d7 <f3> a5 8b 4d e4 83 e1 03 74 02 f3 a4 8b 45 e0 b9 a0 00 00 00 8b
EIP: [<f883b115>] isight_firmware_load+0x105/0x240 [isight_firmware] SS:ESP 0068:f7191cfc
---[ end trace 8ea9a3ecb

Sounds like you might be having the same issue I was having with isight_firmware here is the link to the patch: http://lkml.org/lkml/2008/6/6/407
check and make sure, from what I could tell they look similar. regards;

Yes indeed. For the record: Looks like git-current has the patch and voila the system doesn't hang on hid2hci any longer :)

Soeren

#7 lore raw
Quoted 27 lines · Soeren Sonnenburg
Quoted 8 lines · Justin Mattock
Quoted 4 lines · Soeren Sonnenburg
Quoted 3 lines · Marcel Holtmann

Hi Soeren,

Quoted 1 line
Quoted 1 line
Quoted 1 line

updating to 2.6.26-rc5+git I recognize that debian sid

suddenly hangs on

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

boot when bluetooth is activated. The last message I see is

[...]

Quoted 7 lines
Quoted 7 lines
Quoted 2 lines

then please disable hid2hci and see if it still has a problem and report this to the USB guys.

Indeed when I disable the call to hid2hci it boots through. While booting I see another (unrelated?) oops (see below).

When I after booting call hid2hci in a terminal it simply hangs.

[...]

Quoted 8 lines
Quoted 3 lines
Code: b5 83 7d d4 32 bf 32 00 00 00 ba d0 00 00 00 89 de 0f 4e 7d d4 89 f8 89 7d e4 e8 f7 71 94 c7 89 f9 c1 e9 02 89 c2 89 45 e8 89 d7 <f3> a5 8b 4d e4 83 e1 03 74 02 f3 a4 8b 45 e0 b9 a0 00 00 00 8b
EIP: [<f883b115>] isight_firmware_load+0x105/0x240 [isight_firmware] SS:ESP 0068:f7191cfc
---[ end trace 8ea9a3ecb

Sounds like you might be having the same issue I was having with isight_firmware here is the link to the patch: http://lkml.org/lkml/2008/6/6/407
check and make sure, from what I could tell they look similar. regards;

Quoted 5 lines

Yes indeed. For the record: Looks like git-current has the patch and voila the system doesn't hang on hid2hci any longer :)

Soeren

Cool; Quick question I'm not sure what version of the macbook pro you have, but with me the version before the santa rosa release(the one with ATI chipset) anyways I'm noticing on a cold boot the isight_firmware and uvcvideo are not binding for some reason or another. are you seeing this as well? i.g. if I start the system and the two haven't binded I usually rmmod the two and then modprobe, then reboot and all goes good, but as soon as I shutdown the system and start the system back up the two seem to not bind. maybe I'm missing something
As the for the situation with you I'm glad to see you're up and running. regards;

Signature · 1 line
Justin P. Mattock