Skip to contentSkip to conversation

alsa and 2.6.25.4 kernel

DISCUSSION [email protected] 2 participants 3 messages Jun 13, 2008 – Jun 16, 2008

lore
Share & tools
lore
#0 lore raw

Hi,

I can't play sound or use mixer with alsa on 2.6.25.4 kernel.

I tried all alsa-libs (1.16, 1.17rc1, hg) without success.

the file /proc/asound/cards is :

cat /proc/asound/cards
0 [NVidia ]: HDA-Intel - HDA NVidia

                      HDA NVidia at 0xf0100000 irq 18

strace -e open amixer :

...
open("/dev/snd/controlC0", O_RDONLY) = -1 ENODEV (No such device)
open("/dev/aloadC0", O_RDONLY) = -1 ENODEV (No such device)

ls -l /dev/snd/controlC0
crw-rwxrw- 1 root users 116, 0 Aug 23 2004 /dev/snd/controlC0

what happens ???

Regards.

Yann.

#1 lore raw

At Fri, 13 Jun 2008 19:02:40 +0200,

Quoted 19 lines · [email protected] wrote:

Hi,

I can't play sound or use mixer with alsa on 2.6.25.4 kernel.

I tried all alsa-libs (1.16, 1.17rc1, hg) without success.

the file /proc/asound/cards is :

cat /proc/asound/cards
0 [NVidia ]: HDA-Intel - HDA NVidia

                      HDA NVidia at 0xf0100000 irq 18

strace -e open amixer :

...
open("/dev/snd/controlC0", O_RDONLY) = -1 ENODEV (No such device)
open("/dev/aloadC0", O_RDONLY) = -1 ENODEV (No such device)

Quoted 5 lines

ls -l /dev/snd/controlC0
crw-rwxrw- 1 root users 116, 0 Aug 23 2004 /dev/snd/controlC0

what happens ???

My wild guess is that the device file doesn't match with the kernel setting. You can build ALSA drivers with dynamic minor numbers. In this case, the minor numbers of device files are assigned dynamically, and thus the device files must be handled via udev. If you have static device files with different numbers, this won't match properly.

Takashi

#2 lore raw

Thanks for your response.

My distro (http://linuxconsole.org) doesn't use udev, to go faster.

I disabled alsa from 2.6.25.4 kernel, build alsa drivers from alsa-driver-1.0.17rc1 and now it works fine.

Best regards.

Yann.

Selon Takashi Iwai <[email protected]>:

Quoted 11 lines

My wild guess is that the device file doesn't match with the kernel setting. You can build ALSA drivers with dynamic minor numbers. In this case, the minor numbers of device files are assigned dynamically, and thus the device files must be handled via udev. If you have static device files with different numbers, this won't match properly.

Takashi