Adding "no-ack" flag to the radiotap flags
Hi.
Currently, there's no way to define whether the hardware should wait for an ACK for an injected frame or not. This can be a performance bottleneck, as the hardware will try to retransmit until it receives an ACK.
I suggest adding
#define IEEE80211_RADIOTAP_F_NOACK 0x40
so an application can define that it is not interested in an ACK for the frame and the card should not bother retrying until it received one.
When this flag is not set, the standard rules apply.
I don't see a use-case for overriding these rules to always _expect_ an ACK, so I think a one-bit flag is OK.
Signature · 1 line
Greetings Michael.
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 10 lines
I suggest adding
#defineIEEE80211_RADIOTAP_F_NOACK0x40
so an application can define that it is not interested in an ACK for the frame and the card should not bother retrying until it received one.
When this flag is not set, the standard rules apply.I don't see a use-case for overriding these rules to always _expect_ an ACK, so I think a one-bit flag is OK.
I'd add it to the TX flags instead, especially seeing that the bit 0x40 is already assigned there in some BSDs.
johannes