Skip to contentSkip to conversation

w100fb: add 80 MHz modeline

PATCH In review Philipp Zabel 2 participants 2 messages Jun 29, 2008 Framebuffer layer

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 w100fb: add 80 MHz modeline

This is needed for HTC Blueangel (w3200).
At 96MHz its screen flickers.

---
 drivers/video/w100fb.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)
drivers/video/w100fb.c +1 -0
index 30469bf..3e48eef 100644
@@ -1003,6 +1003,7 @@ static struct w100_pll_info xtal_14318000[] = {
 static struct w100_pll_info xtal_16000000[] = {
 	/*freq     M   N_int    N_fac  tfgoal  lock_time */
 	{ 72,      1,   8,       0,     0xe0,        48}, /* tfgoal guessed */
+	{ 80,      1,   9,       0,     0xe0,        13}, /* tfgoal guessed */
 	{ 95,      1,   10,      7,     0xe0,        38}, /* tfgoal guessed */
 	{ 96,      1,   11,      0,     0xe0,        36}, /* tfgoal guessed */
 	{  0,      0,   0,       0,        0,         0},
Signature · 1 line
1.5.5.4
Acked-by on v1 1/1
#1 lore raw

On Sun, 2008-06-29 at 15:53 +0200, Philipp Zabel wrote:

Looks fine to me. 'lock time' looks a bit low but since the PLL is
very poorly understood (I wrote the c based on winCE disassembly) if it works, go for it.

Quoted 4 lines

This is needed for HTC Blueangel (w3200).
At 96MHz its screen flickers.

Quoted 16 lines
---
 drivers/video/w100fb.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)
drivers/video/w100fb.c +1 -0
index 30469bf..3e48eef 100644
@@ -1003,6 +1003,7 @@ static struct w100_pll_info xtal_14318000[] = {
 static struct w100_pll_info xtal_16000000[] = {
 	/*freq     M   N_int    N_fac  tfgoal  lock_time */
 	{ 72,      1,   8,       0,     0xe0,        48}, /* tfgoal guessed */
+	{ 80,      1,   9,       0,     0xe0,        13}, /* tfgoal guessed */
 	{ 95,      1,   10,      7,     0xe0,        38}, /* tfgoal guessed */
 	{ 96,      1,   11,      0,     0xe0,        36}, /* tfgoal guessed */
 	{  0,      0,   0,       0,        0,         0},