ALSA: Add jack reporting API
PATCH 1/2 ALSA: Add jack reporting API
Currently very few systems provide information about jack status to user space, even though many have hardware facilities to do detection. Those systems that do use an input device with the existing SW_HEADPHONE_INSERT switch type to do so, often independently of ALSA.
This patch introduces a standard method for representing jacks to user space into ALSA. It allows drivers to register jacks for a sound card with the input subsystem, binding the input device to the card to help user space associate the input devices with their sound cards. The created input devices are named in the form "card longname jack" where jack is provided by the driver when allocating a jack. By default the parent for the input device is the sound card but this can be overridden by the card driver.
The existing user space API with SW_HEADPHONE_INSERT is preserved.
--- include/sound/core.h | 1 + include/sound/jack.h | 75 +++++++++++++++++++++++ sound/core/jack.c | 163 ++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 239 insertions(+), 0 deletions(-) create mode 100644 include/sound/jack.h create mode 100644 sound/core/jack.c
include/sound/core.h +1 -0
@@ -63,6 +63,7 @@ typedef int __bitwise snd_device_type_t;#define SNDRV_DEV_INFO ((__force snd_device_type_t) 0x1006)#define SNDRV_DEV_BUS ((__force snd_device_type_t) 0x1007)#define SNDRV_DEV_CODEC ((__force snd_device_type_t) 0x1008) +#define SNDRV_DEV_JACK ((__force snd_device_type_t) 0x1009)#define SNDRV_DEV_LOWLEVEL ((__force snd_device_type_t) 0x2000)typedef int __bitwise snd_device_state_t ;
include/sound/jack.h new file +75 -0
75 lines not on this page · raw message
sound/core/jack.c new file +163 -0
163 lines not on this page · raw message
Signature · 1 line
1.5.4.3
PATCH 2/2 ALSA: Build jack detection
Since jack detection requires the input subsystem which may not be desired on small systems it is not built unless required by a driver that is being built. Drivers using jack detection should use a pattern like this:
config SND_FOO
tristate "..."
...
select SND_JACK if INPUT=y || INPUT=SNDto ensure that the jack detection API is enabled if the input subsystem is. If the input subsystem is not enabled then a stub version of the API is provided.
--- sound/core/Kconfig | 6 ++++++ sound/core/Makefile | 1 + 2 files changed, 7 insertions(+), 0 deletions(-)
sound/core/Kconfig +6 -0
@@ -12,6 +12,12 @@ config SND_HWDEP config SND_RAWMIDI tristate +# To be effective this also requires INPUT - users should say: +# select SND_JACK if INPUT=y || INPUT=SND +# to avoid having to force INPUT on. +config SND_JACK + bool + config SND_SEQUENCER tristate "Sequencer support" select SND_TIMER
sound/core/Makefile +1 -0
@@ -7,6 +7,7 @@ snd-y := sound.o init.o memory.o info.o control.o misc.o device.o snd-$(CONFIG_ISA_DMA_API) += isadma.o snd-$(CONFIG_SND_OSSEMUL) += sound_oss.o info_oss.o snd-$(CONFIG_SND_VMASTER) += vmaster.o +snd-$(CONFIG_SND_JACK) += jack.o snd-pcm-objs := pcm.o pcm_native.o pcm_lib.o pcm_timer.o pcm_misc.o \ pcm_memory.o
Signature · 1 line
1.5.4.3