Skip to contentSkip to conversation

sata_mv: add the Gen IIE flag to the SoC devices.

PATCH Applied Saeed Bishara 2 participants 2 messages Aug 4, 2008 – Aug 22, 2008 libata

lore
Share & tools
lore

Saeed Bishara

author
#0 lore raw

PATCH 1/1 sata_mv: add the Gen IIE flag to the SoC devices.

The SoC sata port is based on the 7042/6042 devices (Gen IIE). This patch will fix various issues when working with PMP and/or NCQ.

Signed-off-by Saeed Bishara <[email protected]>
---
 drivers/ata/sata_mv.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)
drivers/ata/sata_mv.c +2 -1
index ad169ff..f483067 100644
@@ -3036,7 +3036,8 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
 		break;
 	case chip_soc:
 		hpriv->ops = &mv_soc_ops;
-		hp_flags |= MV_HP_FLAG_SOC | MV_HP_ERRATA_60X1C0;
+		hp_flags |= MV_HP_FLAG_SOC | MV_HP_GEN_IIE |
+			MV_HP_ERRATA_60X1C0;
 		break;
 
 	default:
Signature · 1 line
1.5.2.5
Applied
#1 lore raw
Quoted 7 lines · Saeed Bishara

The SoC sata port is based on the 7042/6042 devices (Gen IIE). This patch will fix various issues when working with PMP and/or NCQ.

Signed-off-by Saeed Bishara <[email protected]>
---
 drivers/ata/sata_mv.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

applied