Skip to contentSkip to conversation

libertas_tf: clear current command on remove

RFC PATCH In review Dan Williams 2 participants 4 messages Sep 8, 2008 – Sep 15, 2008 Networking drivers (wireless)

lore
Share & tools
lore
#0 lore raw

RFC PATCH 1/1 libertas_tf: clear current command on remove

Ensure that the current command is torn down when cleaning up.

---

Completely untested but based on the libertas patch for the same problem. Luis, can you give it a shot and make sure there aren't any regressions when pulling the card or rmmod-ing the driver?

drivers/net/wireless/libertas_tf/main.c +8 -1
index c948021..5f7bf04 100644
@@ -296,8 +296,8 @@ static void lbtf_op_stop(struct ieee80211_hw *hw)
 	struct lbtf_private *priv = hw->priv;
 	unsigned long flags;
 	struct sk_buff *skb;
-
 	struct cmd_ctrl_node *cmdnode;
+
 	/* Flush pending command nodes */
 	spin_lock_irqsave(&priv->driver_lock, flags);
 	list_for_each_entry(cmdnode, &priv->cmdpendingq, list) {
@@ -306,7 +306,14 @@ static void lbtf_op_stop(struct ieee80211_hw *hw)
 		wake_up_interruptible(&cmdnode->cmdwait_q);
 	}
 
+	/* Flush the command the card is currently processing */
+	if (priv->cur_cmd) {
+		priv->cur_cmd->result = -ENOENT;
+		priv->cur_cmd->cmdwaitqwoken = 1;
+		wake_up_interruptible(&priv->cur_cmd->cmdwait_q);
+	}
 	spin_unlock_irqrestore(&priv->driver_lock, flags);
+
 	cancel_work_sync(&priv->cmd_work);
 	cancel_work_sync(&priv->tx_work);
 	while ((skb = skb_dequeue(&priv->bc_ps_buf)))
#1 lore raw

Hi Dan. With this patch, I get a NULL pointer dereference if I pull the card while scanning:

6>[ 131.596162] libertastf: URB in failure status: -71

<6>[  131.712016] usb 4-5: USB disconnect, address 5
<7>[  131.933390] libertastf: command 0x001d failed: -2
<1>[  131.933429] BUG: unable to handle kernel NULL pointer
dereference at 00000000
<1>[  131.933437] IP: [<f8d71d7e>]
:libertas_tf:__lbtf_cleanup_and_insert_cmd+0x2e/0x60
<4>[  131.933452] *pde = 00000000
<0>[  131.933511] Oops: 0002 [#1] SMP
<4>[  131.933519] Modules linked in: arc4 ecb crypto_blkcipher

libertas_tf_usb libertas_tf mac80211 cfg80211 binfmt_misc radeon drm rfcomm l2cap bluetooth nfsd auth_rpcgss exportfs speedstep_lib cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_ondemand freq_table cpufreq_conservative video output rfkill input_polldev sbs sbshc battery nfs lockd nfs_acl sunrpc iptable_filter ip_tables x_tables ac ppdev psmouse serio_raw yenta_socket rsrc_nonstatic container parport_pc parport pcspkr iTCO_wdt iTCO_vendor_support button intel_agp agpgart shpchp pci_hotplug ipv6 evdev ext3 jbd mbcache usbhid hid sg sr_mod sd_mod cdrom ata_piix pata_acpi b44 floppy ata_generic libata scsi_mod dock ssb pcmcia pcmcia_core mii ehci_hcd uhci_hcd usbcore thermal processor fan thermal_sys fuse

<4>[  131.934926]
<4>[  131.934931] Pid: 6090, comm: usb Not tainted (2.6.27-rc6-wl #1)
<4>[  131.934963] EIP: 0060:[<f8d71d7e>] EFLAGS: 00010046 CPU: 0
<4>[  131.934999] EIP is at __lbtf_cleanup_and_insert_cmd+0x2e/0x60
[libertas_tf]
<4>[  131.935032] EAX: 00000000 EBX: f4f372f0 ECX: 00000200 EDX: f4f372f0
<4>[  131.935037] ESI: f751ee60 EDI: 00000000 EBP: f751ee60 ESP: f40efecc
<4>[  131.935069]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
<0>[  131.935101] Process usb (pid: 6090, ti=f40ee000 task=f7530fc0
task.ti=f40ee000)
<0>[  131.935106] Stack: f751f7d4 fffffffe 00000282 f8d72133 f8d72e88
0000001d fffffffe 0000001d
<0>[  131.935177]        f4f372f0 00000000 f7530fc0 c013c580 f40efefc
f40efefc f751e1a0 f751fb48
<0>[  131.935275]        f751f938 f4110480 f8d7225a 00000030 f8d725d0
f40eff24 00300001 c0102c05
<0>[  131.935478] Call Trace:
<0>[  131.935509]  [<f8d72133>] __lbtf_cmd+0xd3/0x130 [libertas_tf]
<0>[  131.935551]  [<c013c580>] autoremove_wake_function+0x0/0x40
<0>[  131.935589]  [<f8d7225a>] lbtf_set_channel+0x3a/0x40 [libertas_tf]
<0>[  131.935600]  [<f8d725d0>] lbtf_cmd_copyback+0x0/0x50 [libertas_tf]
<0>[  131.935637]  [<c0102c05>] __switch_to+0xa5/x160
<0>[  131.935644]  [<c0123e8f>] finish_task_switch+0x1f/0xb0
<0>[  131.935652]  [<c0324e6b>] schedule+0x25b/0x6a0
<0>[  131.935660]  [<f8d7176>] lbtf_op_config+0x26/0x0 [libertas_tf]
<0>[  11.935750]  [<f8d91056> ieee80211_hw_config+056/0x70 [mac80211]
<0[  131.935803]  [<f8d9e49>] ieee80211_sta_scn_work+0x179/0x1e0 [ma80211]
<0>[  131.93585]  [<c01397b4>] queue_elayed_work_on+0x84/0x0
<0>[  131.935887]  [c013909a>] run_workquee+0xca/0x170
<0>[  131935949]  [<c0326ae1>]_spin_lock_irqsave+0x3/0x50
<0>[  131.936036] [<f8d97cd0>] ieee8021_sta_scan_work+0x0/0xe0 [mac80211]
<0>[  13.936085]  [<c0139980>]worker_thread+0x0/0xe0
0>[  131.936119]  [<c139a00>] worker_thread+x80/0xe0
<0>[  131.93679]  [<c013c580>] autoemove_wake_function+0x/0x40
<0>[  131.936239  [<c0139980>] workerthread+0x0/0xe0
<0>[  31.936299]  [<c013c262] kthread+0x42/0x70
<0013c20>] kthread+0x0/0x70
<0[  131.936392]  [<c0100d7>] kernel_thread_heper+0x7/0x10
<0>[  131936453]  ======================
<0>[  131.93509] Code: 85 d2 89 1c24 89 d3 89 74 24 04 8 c6 89 7c 24
08 74 33 c 42 0c 00 00 00 00 31 0 b9 00 02 00 00 c7 4210 00 00 00 00
8b 7a 1 <f3> ab 8b 96 68 09 0 00 8d 86 64 09 00 00 9 9e 68 09 00 00 89
<>[  131.937384] EIP: [f8d71d7e>]
__lbtf_clenup_and_insert_cmd+0x2/0x60 [libertas_tf] SSESP
0068:f40efecc
<4>[ 131.937384] ---[ endtrace 32fe8679f56e2101]---
Quoted 45 lines · Dan Williams

Ensure that the current command is torn down when cleaning up.

---

Completely untested but based on the libertas patch for the same problem. Luis, can you give it a shot and make sure there aren't any regressions when pulling the card or rmmod-ing the driver?

drivers/net/wireless/libertas_tf/main.c +8 -2
index c948021..5f7bf04 100644
@@ -296,8 +296,8 @@ static void lbtf_op_stop(struct ieee80211_hw *hw)
       struct lbtf_private *priv = hw->priv;
       unsigned long flags;
       struct sk_buff *skb;
-
       struct cmd_ctrl_node *cmdnode;
+
       /* Flush pending command nodes */
       spin_lock_irqsave(&priv->driver_lock, flags);
       list_for_each_entry(cmdnode, &priv->cmdpendingq, list) {
@@ -306,7 +306,14 @@ static void lbtf_op_stop(struct ieee80211_hw *hw)
               wake_up_interruptible(&cmdnode->cmdwait_q);
       }
 
+       /* Flush the command the card is currently processing */
+       if (priv->cur_cmd) {
+               priv->cur_cmd->result = -ENOENT;
+               priv->cur_cmd->cmdwaitqwoken = 1;
+               wake_up_interruptible(&priv->cur_cmd->cmdwait_q);
+       }
       spin_unlock_irqrestore(&priv->driver_lock, flags);
+
       cancel_work_sync(&priv->cmd_work);
       cancel_work_sync(&priv->tx_work);
       while ((skb = skb_dequeue(&priv->bc_ps_buf)))
 
 
--

To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#2 lore raw
Quoted 2 lines · Andrey Yurovsky

Hi Dan. With this patch, I get a NULL pointer dereference if I pull the card while scanning:

So the USB disconnect calls lbs_remove_card(), which first calls lbtf_free_adapter() (clearing the entire command array), and then it calls ieee80211_unregister_hw(), which calls lbs_op_stop(), which clears the current command node, and then ieee80211_unregister_hw() calls flush_workqueue() on the work queue that the scan could currently be pending in.

The scan command, currently blocking in __lbtf_cmd() in wait_event_interruptible(), now gets woken up because of my patch to lbs_op_stop(). Its flow continues through __lbtf_cmd() until __lbtf_cleanup_and_insert_cmd(), where it tries a memset(cmdnode->cmdbuf, 0, ...). Unfortunately, cmdnode->cmdbuf is now NULL, having been cleared in lbtf_free_cmd_buffer() already by lbtf_free_adapter() quite early in the device removal chain. Explosion.

About all I can think of right now is something like:

drivers/net/wireless/libertas_tf/cmd.c +6 -1
index fdbcf8b..481d189 100644
@@ -550,11 +550,16 @@ int __lbtf_cmd(struct lbtf_private *priv, uint16_t command,
 	might_sleep();
 	ret = wait_event_interruptible(cmdnode->cmdwait_q,
 				       cmdnode->cmdwaitqwoken);
-       if (ret)	{
+	if (ret) {
 		printk(KERN_DEBUG
 		       "libertastf: command 0x%04x interrupted by signal",
 		       command);
 		return ret;
+	} else if (priv->surpriseremoved) {
+		printk(KERN_DEBUG
+		       "libertastf: command 0x%04x interrupted by device "
+		       "disconnect", command);
+		return -ENODEV;
 	}
 
 	spin_lock_irqsave(&priv->driver_lock, flags);

Does that fix it for you? If so, I'll roll this one up with the previous patch and resubmit.

Dan

Quoted 115 lines

6>[ 131.596162] libertastf: URB in failure status: -71

<6>[  131.712016] usb 4-5: USB disconnect, address 5
<7>[  131.933390] libertastf: command 0x001d failed: -2
<1>[  131.933429] BUG: unable to handle kernel NULL pointer
dereference at 00000000
<1>[  131.933437] IP: [<f8d71d7e>]
:libertas_tf:__lbtf_cleanup_and_insert_cmd+0x2e/0x60
<4>[  131.933452] *pde = 00000000
<0>[  131.933511] Oops: 0002 [#1] SMP
<4>[  131.933519] Modules linked in: arc4 ecb crypto_blkcipher

libertas_tf_usb libertas_tf mac80211 cfg80211 binfmt_misc radeon drm rfcomm l2cap bluetooth nfsd auth_rpcgss exportfs speedstep_lib cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_ondemand freq_table cpufreq_conservative video output rfkill input_polldev sbs sbshc battery nfs lockd nfs_acl sunrpc iptable_filter ip_tables x_tables ac ppdev psmouse serio_raw yenta_socket rsrc_nonstatic container parport_pc parport pcspkr iTCO_wdt iTCO_vendor_support button intel_agp agpgart shpchp pci_hotplug ipv6 evdev ext3 jbd mbcache usbhid hid sg sr_mod sd_mod cdrom ata_piix pata_acpi b44 floppy ata_generic libata scsi_mod dock ssb pcmcia pcmcia_core mii ehci_hcd uhci_hcd usbcore thermal processor fan thermal_sys fuse

<4>[  131.934926]
<4>[  131.934931] Pid: 6090, comm: usb Not tainted (2.6.27-rc6-wl #1)
<4>[  131.934963] EIP: 0060:[<f8d71d7e>] EFLAGS: 00010046 CPU: 0
<4>[  131.934999] EIP is at __lbtf_cleanup_and_insert_cmd+0x2e/0x60
[libertas_tf]
<4>[  131.935032] EAX: 00000000 EBX: f4f372f0 ECX: 00000200 EDX: f4f372f0
<4>[  131.935037] ESI: f751ee60 EDI: 00000000 EBP: f751ee60 ESP: f40efecc
<4>[  131.935069]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
<0>[  131.935101] Process usb (pid: 6090, ti=f40ee000 task=f7530fc0
task.ti=f40ee000)
<0>[  131.935106] Stack: f751f7d4 fffffffe 00000282 f8d72133 f8d72e88
0000001d fffffffe 0000001d
<0>[  131.935177]        f4f372f0 00000000 f7530fc0 c013c580 f40efefc
f40efefc f751e1a0 f751fb48
<0>[  131.935275]        f751f938 f4110480 f8d7225a 00000030 f8d725d0
f40eff24 00300001 c0102c05
<0>[  131.935478] Call Trace:
<0>[  131.935509]  [<f8d72133>] __lbtf_cmd+0xd3/0x130 [libertas_tf]
<0>[  131.935551]  [<c013c580>] autoremove_wake_function+0x0/0x40
<0>[  131.935589]  [<f8d7225a>] lbtf_set_channel+0x3a/0x40 [libertas_tf]
<0>[  131.935600]  [<f8d725d0>] lbtf_cmd_copyback+0x0/0x50 [libertas_tf]
<0>[  131.935637]  [<c0102c05>] __switch_to+0xa5/x160
<0>[  131.935644]  [<c0123e8f>] finish_task_switch+0x1f/0xb0
<0>[  131.935652]  [<c0324e6b>] schedule+0x25b/0x6a0
<0>[  131.935660]  [<f8d7176>] lbtf_op_config+0x26/0x0 [libertas_tf]
<0>[  11.935750]  [<f8d91056> ieee80211_hw_config+056/0x70 [mac80211]
<0[  131.935803]  [<f8d9e49>] ieee80211_sta_scn_work+0x179/0x1e0 [ma80211]
<0>[  131.93585]  [<c01397b4>] queue_elayed_work_on+0x84/0x0
<0>[  131.935887]  [c013909a>] run_workquee+0xca/0x170
<0>[  131935949]  [<c0326ae1>]_spin_lock_irqsave+0x3/0x50
<0>[  131.936036] [<f8d97cd0>] ieee8021_sta_scan_work+0x0/0xe0 [mac80211]
<0>[  13.936085]  [<c0139980>]worker_thread+0x0/0xe0
0>[  131.936119]  [<c139a00>] worker_thread+x80/0xe0
<0>[  131.93679]  [<c013c580>] autoemove_wake_function+0x/0x40
<0>[  131.936239  [<c0139980>] workerthread+0x0/0xe0
<0>[  31.936299]  [<c013c262] kthread+0x42/0x70
<0013c20>] kthread+0x0/0x70
<0[  131.936392]  [<c0100d7>] kernel_thread_heper+0x7/0x10
<0>[  131936453]  ======================
<0>[  131.93509] Code: 85 d2 89 1c24 89 d3 89 74 24 04 8 c6 89 7c 24
08 74 33 c 42 0c 00 00 00 00 31 0 b9 00 02 00 00 c7 4210 00 00 00 00
8b 7a 1 <f3> ab 8b 96 68 09 0 00 8d 86 64 09 00 00 9 9e 68 09 00 00 89
<>[  131.937384] EIP: [f8d71d7e>]
__lbtf_clenup_and_insert_cmd+0x2/0x60 [libertas_tf] SSESP
0068:f40efecc
<4>[ 131.937384] ---[ endtrace 32fe8679f56e2101]---
Quoted 45 lines · Dan Williams

Ensure that the current command is torn down when cleaning up.

---

Completely untested but based on the libertas patch for the same problem. Luis, can you give it a shot and make sure there aren't any regressions when pulling the card or rmmod-ing the driver?

drivers/net/wireless/libertas_tf/main.c +8 -2
index c948021..5f7bf04 100644
@@ -296,8 +296,8 @@ static void lbtf_op_stop(struct ieee80211_hw *hw)
       struct lbtf_private *priv = hw->priv;
       unsigned long flags;
       struct sk_buff *skb;
-
       struct cmd_ctrl_node *cmdnode;
+
       /* Flush pending command nodes */
       spin_lock_irqsave(&priv->driver_lock, flags);
       list_for_each_entry(cmdnode, &priv->cmdpendingq, list) {
@@ -306,7 +306,14 @@ static void lbtf_op_stop(struct ieee80211_hw *hw)
               wake_up_interruptible(&cmdnode->cmdwait_q);
       }
 
+       /* Flush the command the card is currently processing */
+       if (priv->cur_cmd) {
+               priv->cur_cmd->result = -ENOENT;
+               priv->cur_cmd->cmdwaitqwoken = 1;
+               wake_up_interruptible(&priv->cur_cmd->cmdwait_q);
+       }
       spin_unlock_irqrestore(&priv->driver_lock, flags);
+
       cancel_work_sync(&priv->cmd_work);
       cancel_work_sync(&priv->tx_work);
       while ((skb = skb_dequeue(&priv->bc_ps_buf)))
 
 
--

To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#3 lore raw

Sorry, I get the same oops after that change as well.

Quoted 166 lines · Dan Williams
Quoted 2 lines · Andrey Yurovsky

Hi Dan. With this patch, I get a NULL pointer dereference if I pull the card while scanning:

So the USB disconnect calls lbs_remove_card(), which first calls lbtf_free_adapter() (clearing the entire command array), and then it calls ieee80211_unregister_hw(), which calls lbs_op_stop(), which clears the current command node, and then ieee80211_unregister_hw() calls flush_workqueue() on the work queue that the scan could currently be pending in.

The scan command, currently blocking in __lbtf_cmd() in wait_event_interruptible(), now gets woken up because of my patch to lbs_op_stop(). Its flow continues through __lbtf_cmd() until __lbtf_cleanup_and_insert_cmd(), where it tries a memset(cmdnode->cmdbuf, 0, ...). Unfortunately, cmdnode->cmdbuf is now NULL, having been cleared in lbtf_free_cmd_buffer() already by lbtf_free_adapter() quite early in the device removal chain. Explosion.

About all I can think of right now is something like:

drivers/net/wireless/libertas_tf/cmd.c +6 -1
index fdbcf8b..481d189 100644
@@ -550,11 +550,16 @@ int __lbtf_cmd(struct lbtf_private *priv, uint16_t command,
       might_sleep();
       ret = wait_event_interruptible(cmdnode->cmdwait_q,
                                      cmdnode->cmdwaitqwoken);
-       if (ret)        {
+       if (ret) {
               printk(KERN_DEBUG
                      "libertastf: command 0x%04x interrupted by signal",
                      command);
               return ret;
+       } else if (priv->surpriseremoved) {
+               printk(KERN_DEBUG
+                      "libertastf: command 0x%04x interrupted by device "
+                      "disconnect", command);
+               return -ENODEV;
       }
 
       spin_lock_irqsave(&priv->driver_lock, flags);

Does that fix it for you? If so, I'll roll this one up with the previous patch and resubmit.

Dan

Quoted 115 lines

6>[ 131.596162] libertastf: URB in failure status: -71

<6>[  131.712016] usb 4-5: USB disconnect, address 5
<7>[  131.933390] libertastf: command 0x001d failed: -2
<1>[  131.933429] BUG: unable to handle kernel NULL pointer
dereference at 00000000
<1>[  131.933437] IP: [<f8d71d7e>]
:libertas_tf:__lbtf_cleanup_and_insert_cmd+0x2e/0x60
<4>[  131.933452] *pde = 00000000
<0>[  131.933511] Oops: 0002 [#1] SMP
<4>[  131.933519] Modules linked in: arc4 ecb crypto_blkcipher

libertas_tf_usb libertas_tf mac80211 cfg80211 binfmt_misc radeon drm rfcomm l2cap bluetooth nfsd auth_rpcgss exportfs speedstep_lib cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_ondemand freq_table cpufreq_conservative video output rfkill input_polldev sbs sbshc battery nfs lockd nfs_acl sunrpc iptable_filter ip_tables x_tables ac ppdev psmouse serio_raw yenta_socket rsrc_nonstatic container parport_pc parport pcspkr iTCO_wdt iTCO_vendor_support button intel_agp agpgart shpchp pci_hotplug ipv6 evdev ext3 jbd mbcache usbhid hid sg sr_mod sd_mod cdrom ata_piix pata_acpi b44 floppy ata_generic libata scsi_mod dock ssb pcmcia pcmcia_core mii ehci_hcd uhci_hcd usbcore thermal processor fan thermal_sys fuse

<4>[  131.934926]
<4>[  131.934931] Pid: 6090, comm: usb Not tainted (2.6.27-rc6-wl #1)
<4>[  131.934963] EIP: 0060:[<f8d71d7e>] EFLAGS: 00010046 CPU: 0
<4>[  131.934999] EIP is at __lbtf_cleanup_and_insert_cmd+0x2e/0x60
[libertas_tf]
<4>[  131.935032] EAX: 00000000 EBX: f4f372f0 ECX: 00000200 EDX: f4f372f0
<4>[  131.935037] ESI: f751ee60 EDI: 00000000 EBP: f751ee60 ESP: f40efecc
<4>[  131.935069]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
<0>[  131.935101] Process usb (pid: 6090, ti=f40ee000 task=f7530fc0
task.ti=f40ee000)
<0>[  131.935106] Stack: f751f7d4 fffffffe 00000282 f8d72133 f8d72e88
0000001d fffffffe 0000001d
<0>[  131.935177]        f4f372f0 00000000 f7530fc0 c013c580 f40efefc
f40efefc f751e1a0 f751fb48
<0>[  131.935275]        f751f938 f4110480 f8d7225a 00000030 f8d725d0
f40eff24 00300001 c0102c05
<0>[  131.935478] Call Trace:
<0>[  131.935509]  [<f8d72133>] __lbtf_cmd+0xd3/0x130 [libertas_tf]
<0>[  131.935551]  [<c013c580>] autoremove_wake_function+0x0/0x40
<0>[  131.935589]  [<f8d7225a>] lbtf_set_channel+0x3a/0x40 [libertas_tf]
<0>[  131.935600]  [<f8d725d0>] lbtf_cmd_copyback+0x0/0x50 [libertas_tf]
<0>[  131.935637]  [<c0102c05>] __switch_to+0xa5/x160
<0>[  131.935644]  [<c0123e8f>] finish_task_switch+0x1f/0xb0
<0>[  131.935652]  [<c0324e6b>] schedule+0x25b/0x6a0
<0>[  131.935660]  [<f8d7176>] lbtf_op_config+0x26/0x0 [libertas_tf]
<0>[  11.935750]  [<f8d91056> ieee80211_hw_config+056/0x70 [mac80211]
<0[  131.935803]  [<f8d9e49>] ieee80211_sta_scn_work+0x179/0x1e0 [ma80211]
<0>[  131.93585]  [<c01397b4>] queue_elayed_work_on+0x84/0x0
<0>[  131.935887]  [c013909a>] run_workquee+0xca/0x170
<0>[  131935949]  [<c0326ae1>]_spin_lock_irqsave+0x3/0x50
<0>[  131.936036] [<f8d97cd0>] ieee8021_sta_scan_work+0x0/0xe0 [mac80211]
<0>[  13.936085]  [<c0139980>]worker_thread+0x0/0xe0
0>[  131.936119]  [<c139a00>] worker_thread+x80/0xe0
<0>[  131.93679]  [<c013c580>] autoemove_wake_function+0x/0x40
<0>[  131.936239  [<c0139980>] workerthread+0x0/0xe0
<0>[  31.936299]  [<c013c262] kthread+0x42/0x70
<0013c20>] kthread+0x0/0x70
<0[  131.936392]  [<c0100d7>] kernel_thread_heper+0x7/0x10
<0>[  131936453]  ======================
<0>[  131.93509] Code: 85 d2 89 1c24 89 d3 89 74 24 04 8 c6 89 7c 24
08 74 33 c 42 0c 00 00 00 00 31 0 b9 00 02 00 00 c7 4210 00 00 00 00
8b 7a 1 <f3> ab 8b 96 68 09 0 00 8d 86 64 09 00 00 9 9e 68 09 00 00 89
<>[  131.937384] EIP: [f8d71d7e>]
__lbtf_clenup_and_insert_cmd+0x2/0x60 [libertas_tf] SSESP
0068:f40efecc
<4>[ 131.937384] ---[ endtrace 32fe8679f56e2101]---
Quoted 45 lines · Dan Williams

Ensure that the current command is torn down when cleaning up.

---

Completely untested but based on the libertas patch for the same problem. Luis, can you give it a shot and make sure there aren't any regressions when pulling the card or rmmod-ing the driver?

drivers/net/wireless/libertas_tf/main.c +8 -2
index c948021..5f7bf04 100644
@@ -296,8 +296,8 @@ static void lbtf_op_stop(struct ieee80211_hw *hw)
       struct lbtf_private *priv = hw->priv;
       unsigned long flags;
       struct sk_buff *skb;
-
       struct cmd_ctrl_node *cmdnode;
+
       /* Flush pending command nodes */
       spin_lock_irqsave(&priv->driver_lock, flags);
       list_for_each_entry(cmdnode, &priv->cmdpendingq, list) {
@@ -306,7 +306,14 @@ static void lbtf_op_stop(struct ieee80211_hw *hw)
               wake_up_interruptible(&cmdnode->cmdwait_q);
       }
 
+       /* Flush the command the card is currently processing */
+       if (priv->cur_cmd) {
+               priv->cur_cmd->result = -ENOENT;
+               priv->cur_cmd->cmdwaitqwoken = 1;
+               wake_up_interruptible(&priv->cur_cmd->cmdwait_q);
+       }
       spin_unlock_irqrestore(&priv->driver_lock, flags);
+
       cancel_work_sync(&priv->cmd_work);
       cancel_work_sync(&priv->tx_work);
       while ((skb = skb_dequeue(&priv->bc_ps_buf)))
 
 
--

To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html