Skip to contentSkip to conversation

loglevel=pci:7,acpi:6 support

PATCH In review Yinghai Lu 3 participants 11 messages Sep 16, 2008

Subsystems (4)
lore
Share & tools
lore

Yinghai Lu

author
#0 lore raw

cover loglevel=pci:7,acpi:6 support

usage:
in .c to have
DEFINE_LOGLEVEL_SETUP(pci, "pci:");
in .h to have
DECLARE_LOGLEVE(pci);
then could use
pci_printk(KERN_LOG_DEBUG, fmt, ...);
and command line
loglevel=pci:7

you can add different printk to different files of one subsys if you like not just one susbsys one tag, and don't need to update kernel.h to add more tags

YH

author
#1 lore raw

PATCH 1/5 add DEFINE_LOGLEVEL_SETUP v3

so could make subsys easy to add loglevel and xxx_printk
v2: make it more genric, so subsys user only need to two line macro
v3: add back nameStr, so could find out iommu: and iommu_gart: and etc

usage:
in .c to have
DEFINE_LOGLEVEL_SETUP(pci, "pci:");
in .h to have
DECLARE_LOGLEVE(pci);
then could use
pci_printk(KERN_LOG_DEBUG, fmt, ...);
and command line
loglevel=pci:7

you can add different printk to different files of one subsys if you like

---
 arch/x86/kernel/vmlinux_32.lds.S  |    1 +
 arch/x86/kernel/vmlinux_64.lds.S  |    2 ++
 include/asm-generic/vmlinux.lds.h |    8 ++++++++
 include/linux/init.h              |   36 ++++++++++++++++++++++++++++++++++++
 include/linux/kernel.h            |    9 +++++++++
 init/main.c                       |   27 ++++++++++++++++++++++++++-
 6 files changed, 82 insertions(+), 1 deletion(-)
arch/x86/kernel/vmlinux_32.lds.S +1 -0
Index: linux-2.6/arch/x86/kernel/vmlinux_32.lds.S
===================================================================
@@ -145,6 +145,7 @@ SECTIONS
 	*(.x86_cpu_dev.init)
 	__x86_cpu_dev_end = .;
   }
+  LOGLEVEL_SETUP_INIT(8)
   DYN_ARRAY_INIT(8)
   SECURITY_INIT
   . = ALIGN(4);
arch/x86/kernel/vmlinux_64.lds.S +2 -0
Index: linux-2.6/arch/x86/kernel/vmlinux_64.lds.S
===================================================================
@@ -174,6 +174,8 @@ SECTIONS
   }
   __x86_cpu_dev_end = .;
 
+  LOGLEVEL_SETUP_INIT(8)
+
   DYN_ARRAY_INIT(8)
 
   SECURITY_INIT
include/asm-generic/vmlinux.lds.h +8 -0
Index: linux-2.6/include/asm-generic/vmlinux.lds.h
===================================================================
@@ -222,6 +222,14 @@
  * All archs are supposed to use RO_DATA() */
 #define RODATA RO_DATA(4096)
 
+#define LOGLEVEL_SETUP_INIT(align)					\
+	. = ALIGN((align));						\
+	.loglevel_setup.init : AT(ADDR(.loglevel_setup.init) - LOAD_OFFSET) {	\
+		VMLINUX_SYMBOL(__loglevel_setup_start) = .;		\
+		*(.loglevel_setup.init)					\
+		VMLINUX_SYMBOL(__loglevel_setup_end) = .;		\
+	}
+
 #define DYN_ARRAY_INIT(align)							\
 	. = ALIGN((align));						\
 	.dyn_array.init : AT(ADDR(.dyn_array.init) - LOAD_OFFSET) {	\
include/linux/init.h +36 -0
Index: linux-2.6/include/linux/init.h
===================================================================
@@ -251,6 +251,42 @@ struct obs_kernel_param {
 /* Relies on boot_command_line being set */
 void __init parse_early_param(void);
 
+#define DECLARE_LOGLEVEL(nameX)					\
+	extern int loglevel_##nameX;				\
+	extern int nameX##_printk(int v, const char *fmt, ...)
+
+struct loglevel_setup {
+	char *name;
+	void (*setup)(char *);
+};
+
+extern struct loglevel_setup *__loglevel_setup_start[], *__loglevel_setup_end[];
+
+#define DEFINE_LOGLEVEL_SETUP(nameX, nameStr)				\
+	int loglevel_##nameX;					\
+	int nameX##_printk(int v, const char *fmt, ...)		\
+	{							\
+		va_list args;					\
+		int r;						\
+		if (v > loglevel_##nameX)			\
+			return 0;				\
+		va_start(args, fmt);				\
+		r = vprintk(fmt, args);				\
+		va_end(args);					\
+		return r;					\
+	}							\
+	static void __init setup_loglevel_##nameX(char *str)	\
+	{							\
+		get_option(&str, &loglevel_##nameX);		\
+	}							\
+	static struct loglevel_setup __loglevel_setup_##nameX __initdata = \
+	{	.name = nameStr,					\
+		.setup = setup_loglevel_##nameX,		\
+	};							\
+	static struct loglevel_setup *__loglevel_setup_ptr_##nameX __used \
+	__attribute__((__section__(".loglevel_setup.init"))) =	\
+		&__loglevel_setup_##nameX
+
 struct dyn_array {
 	void **name;
 	unsigned long size;
include/linux/kernel.h +9 -0
Index: linux-2.6/include/linux/kernel.h
===================================================================
@@ -104,6 +104,15 @@ extern int console_printk[];
 #define minimum_console_loglevel (console_printk[2])
 #define default_console_loglevel (console_printk[3])
 
+#define	KERN_LOG_EMERG	0	/* system is unusable			*/
+#define	KERN_LOG_ALERT	1	/* action must be taken immediately	*/
+#define	KERN_LOG_CRIT	2	/* critical conditions			*/
+#define	KERN_LOG_ERR	3	/* error conditions			*/
+#define	KERN_LOG_WARNING	4	/* warning conditions			*/
+#define	KERN_LOG_NOTICE	5	/* normal but significant condition	*/
+#define	KERN_LOG_INFO	6	/* informational			*/
+#define	KERN_LOG_DEBUG	7	/* debug-level messages			*/
+
 struct completion;
 struct pt_regs;
 struct user;
init/main.c +26 -1
Index: linux-2.6/init/main.c
===================================================================
@@ -248,9 +248,34 @@ static int __init quiet_kernel(char *str
 early_param("debug", debug_kernel);
 early_param("quiet", quiet_kernel);
 
+static char __init *real_loglevel_setup(char *str)
+{
+	struct loglevel_setup **la;
+
+	for (la = __loglevel_setup_start ; la < __loglevel_setup_end; la++) {
+		struct loglevel_setup *l = *la;
+		int len = strlen(l->name);
+
+		if (!strncmp(str, l->name, len)) {
+			l->setup(str + len);
+			str = NULL;
+			break;
+		}
+	}
+
+	return str;
+}
 static int __init loglevel(char *str)
 {
-	get_option(&str, &console_loglevel);
+	while (str) {
+		char *k = strchr(str, ',');
+		if (k)
+			*k++ = 0;
+		if (*str && (str = real_loglevel_setup(str)) && *str) {
+			get_option(&str, &console_loglevel);
+		}
+		str = k;
+	}
 	return 0;
 }
 
#2 lore raw

Re: [PATCH 1/5] add DEFINE_LOGLEVEL_SETUP v3

Quoted 8 lines · Yinghai Lu
include/linux/kernel.h +2 -0
@@ -104,6 +104,15 @@ extern int console_printk[];
 #define minimum_console_loglevel (console_printk[2])
 #define default_console_loglevel (console_printk[3])
 
+#define	KERN_LOG_EMERG	0	/* system is unusable			*/
+#define	KERN_LOG_ALERT	1	/* action must be taken immediately	*/

include/linux/kernel.h extern int console_printk[]; · line 118

Quoted 10 lines
include/linux/kernel.h +7 -0
+#define	KERN_LOG_CRIT	2	/* critical conditions			*/
+#define	KERN_LOG_ERR	3	/* error conditions			*/
+#define	KERN_LOG_WARNING	4	/* warning conditions			*/
+#define	KERN_LOG_NOTICE	5	/* normal but significant condition	*/
+#define	KERN_LOG_INFO	6	/* informational			*/
+#define	KERN_LOG_DEBUG	7	/* debug-level messages			*/
+
 struct completion;
 struct pt_regs;
 struct user;

maybe
#define KERN_LOG_EMERG 0,KERN_EMERG
#define KERN_LOG_ALERT 1,KERN_ALERT
...
?

or better - create printk2(level, fmt) which prints "<", level, ">", fmt and wrap it with pci_printk / acpi_printk?

Marcin

author
#3 lore raw

Re: [PATCH 1/5] add DEFINE_LOGLEVEL_SETUP v3

Quoted 26 lines · Marcin Slusarz
Quoted 8 lines · Yinghai Lu
include/linux/kernel.h +2 -0
@@ -104,6 +104,15 @@ extern int console_printk[];
 #define minimum_console_loglevel (console_printk[2])
 #define default_console_loglevel (console_printk[3])
 
+#define      KERN_LOG_EMERG  0       /* system is unusable                   */
+#define      KERN_LOG_ALERT  1       /* action must be taken immediately     */

include/linux/kernel.h extern int console_printk[]; · line 118

Quoted 10 lines
include/linux/kernel.h +7 -0
+#define      KERN_LOG_CRIT   2       /* critical conditions                  */
+#define      KERN_LOG_ERR    3       /* error conditions                     */
+#define      KERN_LOG_WARNING        4       /* warning conditions                   */
+#define      KERN_LOG_NOTICE 5       /* normal but significant condition     */
+#define      KERN_LOG_INFO   6       /* informational                        */
+#define      KERN_LOG_DEBUG  7       /* debug-level messages                 */
+
 struct completion;
 struct pt_regs;
 struct user;

maybe
#define KERN_LOG_EMERG 0,KERN_EMERG
#define KERN_LOG_ALERT 1,KERN_ALERT
...
?

Quoted 3 lines

or better - create printk2(level, fmt) which prints "<", level, ">", fmt and wrap it with pci_printk / acpi_printk?

will come out one new version that hpa likes

printk(KERN_PCI KERN_DEBUG "sadfasf\n");

YH

#4 lore raw

Re: [PATCH 1/5] add DEFINE_LOGLEVEL_SETUP v3

Quoted 5 lines · Yinghai Lu

will come out one new version that hpa likes

printk(KERN_PCI KERN_DEBUG "sadfasf\n");

Come to think about it, it might help migration pains if we put the prefixes in the opposite order (KERN_DEBUG KERN_PCI).

-hpa

author
#5 lore raw

Re: [PATCH 1/5] add DEFINE_LOGLEVEL_SETUP v3

Quoted 10 lines · H. Peter Anvin
Quoted 5 lines · Yinghai Lu

will come out one new version that hpa likes

printk(KERN_PCI KERN_DEBUG "sadfasf\n");

Come to think about it, it might help migration pains if we put the prefixes in the opposite order (KERN_DEBUG KERN_PCI).

according to the code flow, these two is the same... will double check it.

YH

#6 lore raw

Re: [PATCH 1/5] add DEFINE_LOGLEVEL_SETUP v3

Quoted 11 lines · Yinghai Lu
Quoted 8 lines · H. Peter Anvin
Quoted 4 lines · Yinghai Lu

will come out one new version that hpa likes

printk(KERN_PCI KERN_DEBUG "sadfasf\n");

Come to think about it, it might help migration pains if we put the prefixes in the opposite order (KERN_DEBUG KERN_PCI).

according to the code flow, these two is the same... will double check it.

The difference is that things that read the kernel log in userspace will be able to make partial sense of the latter, but not the former. It will thus make the transition smoother.

-hpa

author
#7 lore raw

PATCH 2/5 pci: add pci_printk v3

In reply to Yinghai Lu

use DEFINE_LOGLEVEL_SETUP to set loglevel for pci
v2: two lines only
v3: use <pci, "pci:"> instead

---
 drivers/pci/pci.c   |    2 ++
 include/linux/pci.h |    2 ++
 2 files changed, 4 insertions(+)
drivers/pci/pci.c +2 -0
Index: linux-2.6/drivers/pci/pci.c
===================================================================
@@ -1953,6 +1953,8 @@ static int __devinit pci_setup(char *str
 }
 early_param("pci", pci_setup);
 
+DEFINE_LOGLEVEL_SETUP(pci, "pci:");
+
 device_initcall_sync(pci_init);
 
 EXPORT_SYMBOL(pci_reenable_device);
include/linux/pci.h +2 -0
Index: linux-2.6/include/linux/pci.h
===================================================================
@@ -55,6 +55,8 @@
 /* Include the ID list */
 #include <linux/pci_ids.h>
 
+DECLARE_LOGLEVEL(pci);
+
 /* pci_slot represents a physical slot */
 struct pci_slot {
 	struct pci_bus *bus;		/* The bus this slot is on */
author
#8 lore raw

PATCH 3/5 pci: using pci_printk

In reply to Yinghai Lu
---
 drivers/pci/probe.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/pci/probe.c +5 -5
Index: linux-2.6/drivers/pci/probe.c
===================================================================
@@ -304,7 +304,7 @@ static int __pci_read_base(struct pci_de
 		} else {
 			res->start = l64;
 			res->end = l64 + sz64;
-			printk(KERN_DEBUG "PCI: %s reg %x 64bit mmio: [%llx, %llx]\n",
+			pci_printk(KERN_LOG_DEBUG, KERN_DEBUG "PCI: %s reg %x 64bit mmio: [%llx, %llx]\n",
 				 pci_name(dev), pos, res->start, res->end);
 		}
 	} else {
@@ -315,7 +315,7 @@ static int __pci_read_base(struct pci_de
 
 		res->start = l;
 		res->end = l + sz;
-		printk(KERN_DEBUG "PCI: %s reg %x %s: [%llx, %llx]\n", pci_name(dev),
+		pci_printk(KERN_LOG_DEBUG, KERN_DEBUG "PCI: %s reg %x %s: [%llx, %llx]\n", pci_name(dev),
 			 pos, (res->flags & IORESOURCE_IO) ? "io port":"32bit mmio",
 			 res->start, res->end);
 	}
@@ -388,7 +388,7 @@ void __devinit pci_read_bridge_bases(str
 			res->start = base;
 		if (!res->end)
 			res->end = limit + 0xfff;
-		printk(KERN_DEBUG "PCI: bridge %s io port: [%llx, %llx]\n",
+		pci_printk(KERN_LOG_DEBUG, KERN_DEBUG "PCI: bridge %s io port: [%llx, %llx]\n",
 				 pci_name(dev), res->start, res->end);
 	}
 
@@ -401,7 +401,7 @@ void __devinit pci_read_bridge_bases(str
 		res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
 		res->start = base;
 		res->end = limit + 0xfffff;
-		printk(KERN_DEBUG "PCI: bridge %s 32bit mmio: [%llx, %llx]\n",
+		pci_printk(KERN_LOG_DEBUG, KERN_DEBUG "PCI: bridge %s 32bit mmio: [%llx, %llx]\n",
 				 pci_name(dev), res->start, res->end);
 	}
 
@@ -438,7 +438,7 @@ void __devinit pci_read_bridge_bases(str
 		res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH;
 		res->start = base;
 		res->end = limit + 0xfffff;
-		printk(KERN_DEBUG "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n",
+		pci_printk(KERN_LOG_DEBUG, KERN_DEBUG "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n",
 				 pci_name(dev), (res->flags & PCI_PREF_RANGE_TYPE_64)?"64":"32",
 				 res->start, res->end);
 	}
author
#9 lore raw

PATCH 4/5 acpi: add acpi_printk v2

In reply to Yinghai Lu

use DEFINE_LOGLEVEL_SETUP to set loglevel for acpi
v2: use <acpi, "acpi:"> instead

---
 drivers/acpi/osl.c   |    2 ++
 include/linux/acpi.h |    1 +
 2 files changed, 3 insertions(+)
drivers/acpi/osl.c +2 -0
Index: linux-2.6/drivers/acpi/osl.c
===================================================================
@@ -75,6 +75,8 @@ EXPORT_SYMBOL(acpi_in_debugger);
 extern char line_buf[80];
 #endif				/*ENABLE_DEBUGGER */
 
+DEFINE_LOGLEVEL_SETUP(acpi, "acpi:");
+
 static unsigned int acpi_irq_irq;
 static acpi_osd_handler acpi_irq_handler;
 static void *acpi_irq_context;
include/linux/acpi.h +1 -0
Index: linux-2.6/include/linux/acpi.h
===================================================================
@@ -43,6 +43,7 @@
 #include <asm/acpi.h>
 #include <linux/dmi.h>
 
+DECLARE_LOGLEVEL(acpi);
 
 enum acpi_irq_model_id {
 	ACPI_IRQ_MODEL_PIC = 0,
author
#10 lore raw

PATCH 5/5 apci: dump slit v3

In reply to Yinghai Lu

v2: using boot_printk
v3: using acpi_printk

---
 drivers/acpi/numa.c |    8 ++++++++
 1 file changed, 8 insertions(+)
drivers/acpi/numa.c +8 -0
Index: linux-2.6/drivers/acpi/numa.c
===================================================================
@@ -150,6 +150,14 @@ static __init int slit_valid(struct acpi
 {
 	int i, j;
 	int d = slit->locality_count;
+	acpi_printk(KERN_LOG_DEBUG, KERN_DEBUG "ACPI: SLIT: nodes = %d\n", d);
+	for (i = 0; i < d; i++) {
+		for (j = 0; j < d; j++)  {
+			u8 val = slit->entry[d*i + j];
+			acpi_printk(KERN_LOG_DEBUG, " %d", val);
+		}
+		acpi_printk(KERN_LOG_DEBUG, "\n");
+	}
 	for (i = 0; i < d; i++) {
 		for (j = 0; j < d; j++)  {
 			u8 val = slit->entry[d*i + j];